Laundry Equipment - Hammerlit

Dolly Frames, Stainless Steel
Mobile Laundry Tub,
Mangle Stands
Utility Tables,
Garment Racks
Mobile Containers,
Aluminium
Bulk Linen Transport Carts,
Aluminium
Wire Container Carts
Transport Cart „Combicar“
Bulk Transport Carts
Laundry
Equipment
78
79
80-81
82
83
84
85
Hammerlit GmbH 77
Laundry
Equipment

Laundry
Equipment
HL-C915/2 HL-C913/2
ALUMINIUM Container A 1130/2
These dolly frames made of STAinLeSS STeeL make it easy to transport various types of containers (polymer, aluminium etc.).
Castors: 4 x 75mm swivel castors, two with brake
The following models are available:
78 Hammerlit GmbH
HL-KW1
HL-MB1
StainLESS StEEL Dolly Frames
Frame dimensions in mm Model # Model # Container Model #
interior exterior Height 150 mm Height 440 mm (mm) interior
Dolly frame ca. 575 x 370 585 x 380 HL-C915/1 HL-C913/1 544 x 340 x 270 A 1130/1
Dolly frame ca. 724 x 459 734 x 469 HL-C915/2 HL-C913/2 703 x 436 x 270 A 1130/2
We also offer mobile frames for our polymer containers, WSnK series (see page 75).
Mobile Laundry tub, StainLESS StEEL
This specialized cart is constructed of a
solid weld, STAinLeSS STeeL, tube frame,
with 4 swivel castors (Ø 75 mm). The tubs
are made of durable polymer.
Height of top edge of tub in the frame:
845 mm
As shown below, a model with push
handle is also available. Again, the
frame is of a solid weld, STAinLeSS
STeeL, tube frame design with 4 swivel
castors. Height of top edge of tub in
the frame: 440 mm
HL-KW2
Dim. in mm Model # Tub Model #
(WxDxH) (WxDxH)
Mobile Laundry 730 x 500 x 640 HL-KW1 750 x 500 x 315 KW1W
Mobile Laundry Tub with push handle 900 x 500 x 900 HL-KW2 750 x 500 x 315 KW1W
Mangle Stands
The frame of the mangle stand is made of STAinLeSS STeeL.
The surface of the horizontal tube is covered with rubber to
ensure good positioning of laundry and to avoid sliding off.
Two fixed and two swivel castors, Ø 75 mm.
Width Height Depth Modell #
1000 1100 500 HL-MB1
1200 1210 600 HL-MB2
1400 1410 600 HL-MB3

HL-MTR3F
KE 1516
Technical Data:
Height: 1660 mm
Width: 1550 mm
Depth: 595 mm
Weight: 15 kg
Material: STAinLeSS STeeL
Castors: 4 swivel castors (Ø 75 mm)
Utility tables
Dimensions W x D x H Model # Model # Model #
in mm height adjustable STAinLeSS STeeL surface
1580 x 660 x 850 HL-MTR 1F HL-HTR 1F HL-MTRE 1F
2080 x 660 x 850 HL-MTR 2F HL-HTR 2F HL-MTRE 2F
2580 x 660 x 850 HL-MTR 3F HL-HTR 3F HL-MTRE 3F
Height adjustable models can be adjusted from 850 to 1050 mm in steps of 50 mm.
Labels for
Garment rack
The frame of this utility tables is made of a solid weld, STAin-
LeSS STeeL, tube frame construction. The table surface is
made of a heat resistant laminate, which is also resistant to
disinfectants and cleansers.
4 x 75 mm diameter wivel castors, 2 with brakes
On demand additional shelf beyond the table surface.
Garment Racks
This high quality garment rack with swivel castors, is ideal
for transporting and storing clothes on hangers.
Additional garment racks see page 132.
Model # KE 1516
Height: 1710 mm
Castors: 4 swivel castors (Ø 125 mm)
Model # KE 1517
Dividers for
Garment rack
EKI 16 EKI 17
Hammerlit GmbH 79
Laundry
Equipment

Laundry
Equipment
80 Hammerlit GmbH
Mobile anodized aLUMiniUM containers
Mobile containers with all around creasing.
These containers can be used for transporting linen, as
well as any other bulk goods.
The high stability is a result of it‘s all around creasing.
Standard containers are equipped with 2 fixed and
2 swivel castors.
Interior dimensions in mm Exterior dimensions in mm Castor Castors Weight Model #
Height Width Depth Height Width Depth configuration Ø mm in kg
560 700 560 715 720 580 2 + 2 100 14,5 TBA 10 E
600 950 550 755 970 570 2 + 2 100 16 TBA 11 E
610 1300 700 800 1330 730 2 + 2 125 28 TBA 12 E
Extra Large Mobile Container, aLUMiniUM anodized
A piece of 250 mm depth has been cut out of one of the longer sides of this aluminium container. The case is reinforced by the all
around creasing. The standard container is equipped with 2 stem and 2 swivel castors.
The mobile container is delivered in anodized design.
Interior dimensions in mm Exterior dimensions in mm Castor Castors Weight Model #
Height Width Depth Height Width Depth configuration Ø mm in kg
665/420 1470 900 850 1500 930 1 - 2 - 1 140/125 35 TBA 15 E

anodized aLUMiniUM Container with Load Leveller
These containers facilitate work in the laundry, as the
goods being loaded are constantly kept at the same working
level.
The base is fitted with spring-suspension and is cast in tub
form. it is guided by solid nylon castors at the front, which
are seated in sturdy metal brackets.
All standard models of containers with spring-suspension
have the following loading capacities:
TBA 40 = 50 kgs and TBA 41 = 100 kgs.
Other spring tensions are available on request.
The container is made of anodized aluminium and is
equipped with 2 fixed and 2 swivel castors (1-2-1).
Spring-suspension base is cast in tub form
Interior dimensions in mm Outside dimensions in mm Castor Castors Weight Model #
Height Length Width Height Length Width configuration Ø mm in kg
560 990 590 800 1080 630 1-2-1 125 34 TBA 40 E
560 1390 700 800 1470 730 1-2-1 125 48 TBA 41 E
Water-tight anodized aLUMiniUM Container
This container has smooth sides and bottom, which are
welded together. it also has a removable base with holes
for drainage.
The drain in the bottom of the container can be closed by
means of a faucet.
The container is equipped with 2 fixed and 2 swivel castors.
Material: anodized aluminium.
Double base with holes for drainage
Interior dimensios in mm Outside dimensions in mm Castor Castors Weight Model #
Height Length Width Height Length Width configuration Ø mm in kg
440 1000 600 730 1030 630 2 + 2 200 33 TBA 20 E
Hammerlit GmbH 81
Laundry
Equipment

Laundry
Equipment
TBA 55 E TBA 55 SG
TBA 66 E
82 Hammerlit GmbH
aLUMiniUM Bulk Linen transport Carts
Bags filled with dirty laundry,
especially those from operating
rooms and intensive care
wards, as well as garbage
bags, should only be transported
in closed containers. Our
models TBA 55 e and TBA 66 e
made of anodized aluminium
have been especially designed
for this application.
These carts all have hinged lids
which open lengthwise. Two
handles are mounted at the
cart to allow easy manoeuvring.
Models TBA 55 SG and
TBA 66 SG have an additionally
reinforced bottom frame
and wrap-around bumpers,
which ensure an extra stability
and a long life in the field.
On Models TBA 55 e and TBA 55 SG, the front wall consists of three sections, which can be folded down as shown in the pictures
below. This reduces the height that material needs to be lifted into the cart, to only 640 mm from the floor. This container has a
loading capacity of 6 to 8 full 70L bags.
TBA 66 SG
Container Models TBA 66 e and TBA 66 SG, come standard with a bi-sectional , collapsible front wall. When this front wall is
folded down, the loading height of the cart is reduced to 840 mm. A drainage faucet at the bottom of the cart is also standard
equipment. Carts have a loading capacity of 10 to 12 full 70L bags and a load rating of 300 kg.
Interior Dimensions in mm Exterior dimensions in mm Castor Castor Dia- Weight Model #
Height Width Depth Height Width Depth configuration meter in mm in kg Anodized
1190 1000 600 1430 1030 640 2 + 2 160 42 TBA 55 E
1190 1000 600 1430 1100 660 2 + 2 160 50 TBA 55 SG
1100 1300 700 1330 1340 740 2 + 2 160 50 TBA 66 E
1100 1300 700 1330 1400 760 2 + 2 160 65 TBA 66 SG

HC 17104 with Corner Bumpers
HC 171
Wire Container Carts
Wire Container Carts
This cart is a combination of transport cart and bulk container. each cart has 2 folding
shelves, which when folded down make the cart ideal for transporting soiled linen
and laundry bags. When the shelves are folded up, fresh linen can be transported.
The HC 171 is much more flexible. nearly each conceivable constallation of shelves is
possible. As this wire container is easy to assemble, it can also be delivered in an
economical knocked down version. (Please add UM to the model#).
Fittings: 2 shelves, 1 put on coat hanger tube, 2 rigid and
2 swivel castors with brake (Ø 125 mm).
Design:
HC 171: zinc finish
All models are equipped with a
rectractable coat hanger tube
Accessories
Description Model #
Cloth cart cover for HC 171 HCZ 01
Rubber strap CBZ 20
Solid bottom shelf HCZ 03
Corner bumper (adds HCZ 04
50 mm to exterior dimension of cart)
2 doors (zinc finish) HCZ 09
Exterior dimensions Interior dimensions Space between wires Weight Model #
mm (with shelves folded down) Intermediate Side Back kg
Cart Frame shelves walls wall
810 x 610 x 1660 750 x 530 x 1430 50 x 50 100 x 25 50 x 200 50 x 200 42 HC 171
860 x 660 x 1660 750 x 530 x 1430 50 x 50 100 x 25 50 x 200 50 x 200 43 HC 17104
Hammerlit GmbH 83
Laundry
Equipment

Laundry
Equipment
CB 270
Combicar „light“:
full length board with solid shelves
CB 260 R
Full length boards with wire shelves
84 Hammerlit GmbH
CB 261 R
Full length boards with solid shelves
Combicar transport Carts
Three variations of the new Combicar are available:
full length boards with wire shelves
full length boards with solid shelves
split boards with solid shelves
Wheels: Polyamid, grey; black elastic tyre tread and precision ball bearing with dustguard
Castor housing: pressed steel, zinc-chromatized
Wheel type: 2 fixed and 2 swivel castors, Ø 200 mm (for CB 270: Ø 125 mm)
Undercarriage frames and constructions are made of STAIN-
LESS STEEL. The solid shelves are washable and can be disinfected.
The undivided shelves can be folded forward or back. normally the
Combicar comes standard with two shelves that can be folded to
the rear. A retro-fit is easily possible on existing carts.
On demand also available with joint
and hitch
Model # KD80
CB 267 R
Split boards with solid shelves
Width Depth Height Self size Height of com- Weight Wheel Model#
(mm) (mm) (mm) (WxD) partment (mm) kg ø
1000 700 1700 900 x 570 550, 550, 230 56 200 CB 260R
1000 700 1700 900 x 570 550, 550, 230 65 200 CB 261R
1000 700 1700 900 x 570 550, 550, 230 62 200 CB 267R
800 600 1800 760 x 570 560, 560, 420 37 125 CB 270

TW 2160
TW 1261
Bulk transport Carts
TW 2160Q
When loading more than 200 kg upper enforcement bar is
recommended.
Our bulk transport carts are made for collecting or distributing full laundry
bags and other goods.
Four donut bumpers at each corner prevent damage to doors and walls (TW
2160 standard without donut bumpers).
These carts can be delivered with an optional rear enclosure. The rear enclosure
panel can also be easily added to existing carts.
Carts are made of an all STAinLeSS STeeL frame construction.
The solid bottom-shelf is washable and disinfectable.
Technical data for all bulk transport carts:
Material: STAinLeSS STeeL, laminated board.
Colour: white
Load rating: 400 kg
Wheels: Polyamid, grey; black elastic tyre tread and precision ball bearing
with dustguard
Castor housing: pressed steel, zinc-chromatized
Wheel type: 2 fixed and 2 swivel castors
Height Length Width Shelf size Weight Bag Model #
capacity without with
mm mm mm mm kg pcs. rear panel rear panel
1085 1020 725 820 x 610 30 8 TW 1160 —
1085 1020 725 820 x 610 37 8 — TW 1161
1085 1270 825 1020 x 710 38 10 TW 1260 —
1085 1270 825 1020 x 710 46 10 — TW 1261
1085 1465 925 1250 x 810 45 12 TW 1460 —
1085 1465 925 1250 x 810 54 12 — TW 1461
1725 1060 600 1000 x 600 50 15 TW 2160 —
1725 1060 600 1000 x 600 59 15 — TW 2161
Hammerlit GmbH 85
Laundry
Equipment