NORDIC SKI PREPARATION

CERA F POWDER ROTO FLEECE APPLICATION
The initial steps before Cera F Roto Corking are the same as for the ironing in method of Cera F.
It is recommended to have one separate T18F Roto Fleece for eatch different Cera F.
CERA F TURBO ROTO FLEECE APPLICATION
1.
Rub on an even layer.
1.
Apply Cera F evenly.
You can “fix” the powder to the base by using
a waxing iron temperature of 150°F (300°F)
by quickly going over, approx. 3 seconds.
2.
Use the T18C Roto Cork first at a speed of
approx. 1.500 RPM. Start from the tip and work
the Cera F into the base by moving the drill back
and forth approx. a foot at a time as you work
your way towards the tail. Use light pressure.
Repeat the procedure above with Roto Fleece
(T18F).
3.
Use the T16M/T15DB Horsehair Roto Brush
with speed 1.500 RPM. Start from the tip and
move back and forth approx. a foot at a time
towards the tail. Use light pressure.
(OBS! Do not use the same brush as for standard
waxes.) You can also use a Horsehair
Hand-Brush (T157). 10 strokes.
2.
Use the T18C Roto Cork first at a speed of
approx. 1.500 RPM. Start from the tip and
work the Cera F into the base by moving
the drill back and forth approx. a foot at a time
as you work your way towards the tail.
Use light pressure.
Repeat the procedure above with Roto Fleece
(T18F).
3.
Use the T16M/T15DB Horsehair Roto Brush
with speed 1.500 RPM. Start from the tip and
move back and forth approx. a foot at a time
towards the tail. Use light pressure.
(OBS! Do not use the same brush as for standard
waxes.) You can also use a Wild Boar
Hand-Brush (T164). 10 strokes.
4.
Finish with the T17W/T15DB Soft Nylon Roto
Brush with speed 1.500 RPM. Start from the
tip and move back and forth approx. a foot at
a time towards the tail. (OBS! Do not use the
same brush as on standard waxes.) Use light
pressure. You can also use a Blue Nylon Hand-
Brush (T160). 3 - 4 strokes.
4.
Finish with the T17W/T15DB Soft Nylon Roto
Brush with speed 1.500 RPM. Start from the
tip and move back and forth approx. a foot at
a time towards the tail. (OBS! Do not use the
same brush as on standard waxes.) Use light
pressure. You can also use a Blue Nylon Hand-
Brush (T160). 3 - 4 strokes.
40 41