TC-150 Media - Filtrair BV

FILTRAIR TC-150 (G2) Air Filter Medium
FILTRAIR AIR FILTER MEDIA
Application
Features
TC-150-Eng-A4-0609
Filtrair TC-150 synthetic fiber medium is specifically
designed to act as durable, low pressure drop pre-filter
and coalescer. It is easy to handle and to install in front
of final filter banks and protects subsequent filter
stages of combustion engine air intake systems and
HVAC plants from coarse dust and water droplets. TC-
150 pre-filters significantly prolong the life of final filters
and increase their operational safety. The TC-150 filter
medium is suitable for being used in any environmental
condition - including offshore, marine - and in any climate
- including tropical (high humidity).
Filter Medium
Filtrair designs and manufactures its own synthetic
filter media, such as the TC-150 medium. The depthloading
medium is manufactured in a progressive density
to ensure high dust holding capacity with lowest
pressure drop. TC-150 filter medium teams up perfectly
with Filtrair rigid pocket filters and Filtrair Optipleat
deep pleat box filters.
♦ For all types of environments, also for those with high
coarse dust, moisture and water mist content
♦ Proprietary, 100% synthetic polyester filter medium,
− with additional hydrophobic treatment at air entry
side - acts as a perfect coalescer
− with additional adhesive finish - for better particle
adherence (prohibits particle bounce)
♦ 100% humidity and water resistant - not collapsing like
glass pads, when loaded with water
♦ Low air flow resistance - only a fraction of that of a
glass pad
♦ Easy to handle and to install - no skin irritation
♦ Available in filter class G2 as per EN 779, in rolls or in
pads, cut to customer specifications
♦ TC-150 medium may be disposed off by incineration

Filtrair TC-150 Air Filter Medium – Technical Specifications
Technical data Unit TC–150
Rated air flow m 3 /h/m 2 10’000
Face velocity at rated air flow m/s 2.85
Initial pressure drop at rated flow Pa 65
Initial pressure drop at 2.5 m/s * Pa 55
Recommended final pressure drop (filter change) Pa 150
Filter class (EN 779: 2002) – G 2
Average arrestance (EN 779) % 66
Application limits
♦ Maximum continuous operating temperature:
≤ 70°C (short peaks up to 100°C)
♦ Admissible relative humidity of air:
≤ 100%
♦ Maximum final operating pressure drop:
250 Pa
♦ Flammability classifications:
DIN 53’438 - class F1
ASHRAE DHC up to 250 Pa (EN 779) g/m 2 375
Filter medium thickness mm 18
* 2.5 m/s face velocity corresponds with
3400 m 3 /h for pad size of 610 x 610 mm Initial Pressure Drop versus Face Velocity
Pressure Drop [Pa]
100
90
80
70
60
50
40
30
20
10
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Face Velocity [m/s]
Arrestance [ % ]
100
80
60
40
20
Arrestance & Pressure Drop versus Dust Fed
Arrestance
Pressure drop
500
400
300
200
100
Pressure drop [Pa]
0
0 100 200 300 400 500 600
Loaded ASHRAE dust [ g/m 2 ]
0
Filtrair bv
De Werf 16, 8447 GE Heerenveen
P.O. Box 611, 8440 AP Heerenveen
The Netherlands
Tel. *31 (0) 513-626355
Fax *31 (0) 513-627306
E-mail: marketing@filtrair.com
www.filtrair.com
All data are average indicative values with usual manufacturing
and testing tolerances. We reserve the right to
modify performance data without prior notice. Specific
performance data will require our written confirmation.
Filtrair ® is the registered trade mark of Filtrair bv.
TC-150-Eng-A4-0609