FELT ALLOY AEROBAR INSTRUCTION MANUAL - Felt Bicycles

More documents

Recommendations

Info

Step 3: Final Assembly Step 4: Cable Routing Routing the brake and shifter cables can be made easier by following these suggested steps: 1. Insert the steel inner cable, starting at the rear of the bar. 2. Route the steel inner cable though the bar until it exits the appropriate hole. 3. Starting at the end nearest the grip area of the bar, slip the cable housing over the cable and continue to advance the cable housing through the bar (using the cable as a guide) until it exits the hole you inserted the cable into. 12
Notes & Dimension Log AERO-TRI BAR Your Dimensions: Name ______________________ Date __________ Stack height __________mm Arm pad width __________mm Extension width __________mm Stem Length/rise __________mm/__________degrees Frame______________________ Notes: Your dimensions: Name ______________________ Date __________ Stack height __________mm Arm pad width __________mm Extension width __________mm Stem Length/rise __________mm/__________degrees Frame______________________ Notes:
Page 1 and 2: FELT ALLOY AEROBAR INSTRUCTION MANU
Page 3 and 4: AERO-TRI BAR INTRODUCTION Thank you
Page 5 and 6: AERO-TRI BAR QTY. SIZE - PART NAME
Page 7 and 8: OVERVIEW AERO-TRI BAR Further adjus
Page 9 and 10: Step 1: Stack Height & Riser Assemb
Page 11: AERO-TRI BAR Possible armrest confi

FELT ALLOY AEROBAR INSTRUCTION MANUAL - Felt Bicycles

Create successful ePaper yourself

Delete template?

Save as template?