Systems & Solutions for a changing World! - Ecobuild

Water Pressure Boosting
1
What it Does
For use in domestic properties where
the existing water supply is insufficient
to meet the demand requirements.
It is a cold water booster set with
integrated pump, 200ltr storage
tank and microprocessor control.
typical Applications
Boost mains water supply, to allow
the demand requirements for a
combi boiler, unvented Hot Water
cylinder, and any outlets that
require a minimum operating
pressure. Suitable for most domestic
properties with a standard bathroom,
en-suite, cloakroom and normal
household appliances
Features and Benefits
• Fully packaged unit - no need
for external tanks or controls.
• Can be connected directly to
the incoming water supply.
• WRAS approved.
• Nominal outlet pressure =
3bar @ 0.5 l/s.
• Adjustable settings via
microprocessor control.
• In built low water level detection
and dry running protection.
• Optional additional 200 ltr
slave tank where mains pressure
is low.
HomEBooStEr
Important Installation
Guidelines
1. The pipe work installation of the
unit should be in accordance with
local water authority regulations.
2. Ensure there is a bypass facility
incorporated into the installation,
to maintain water supply in the
event of an interruption to the
power supply.
3. It is not recommended to fit the
HOMEBOOSTER unit in any loft or
attic space.
Product Codes
HOMEBOOSTER MB240200
Warranty returns procedure
The HOMEBOOSTER is guaranteed
from manufacturing defects for 12
months from the date of installation.
See page 23 &24.
Spares Available - Yes
Accessories Available
Slave Tank Part No MBST0200
Literature
GB/HOMEBOOSTER/DBS/xxxx
For FurtHEr InFormAtIon
visit www.grundfos.co.uk
Visit WebCAPS & GPLUS ECADEMY at www.grundfos.co.uk
Order relevant literature from our Literature Hotline 01525 775217
uPA 15-90
What it Does
Increases the pressure to one tap in
domestic properties.
typical Applications
Boost the pressure to one tap
adding between 0.5bar & 0.75bar
pressure with a single basin or sink tap
running. Only designed for positive
head applications with a flow rate of
90 - 120 l/hr to operate the flow switch.
Features and Benefits
• Easy to install.
• Automatic or manual operation
• Suitable for water temperatures
up to 70°C.
• Maintenance free.
• Low noise level.
• Incorporates flow switch which
starts or stops pump when tap is
switched on or off.
Product Codes
UPA 15 - 90 - 59539510
Warranty returns procedure
Guaranteed from manufacturing
defects for 12 months from the
date of installation.
See page 23 &24.
Spares Available - No
Accessories Available - No
Literature
UPA 15-90 Sales Leaflet
(GB/UPA/xxxx)