Liquidation Of An Entire Flat Panel Display Manufacturing

DoveBid ® 

Orderly Liquidation & Webcast Auction 

by order of • 

Liquidation of an Entire Flat Panel 

Display Manufacturing Facility 

Phase I: 

Orderly Liquidation 

Negotiated Sale 

September 16 - November 8, 2002 

Phase II: Webcast Auction 

November 14, 2002 • 9am PT 

San Jose, CA 

® 

www.industrialauctioneers.org 

www.dovebid.com

Phase I: 

Orderly Liquidation/Negotiated Sale 

September 16, 2002 - November 8, 2002 

Preview 

By appointment only 

For inspection appointment please contact 

Tim Powers tpowers@dovebid.com 

Phase II: 

Webcast Auction 

November 14, 2002 at 9am PT 

San Jose, CA 

Preview 

November 13, 2002 from 9am to 4pm PT 

Preview Location 1 

Candescent Technology Corporation 

6580 Via Del Oro, San Jose, CA 95119-1201 

From San Jose International Airport: Take 

CA-87 South and exit Great Oaks Blvd. Turn right 

on Great Oaks Blvd. Turn right on Via Del Oro. 

Building will be on the right. Please watch for 

auction signs. 

Preview Location 2 

Piedmont Moving Systems (Agent for Mayflower): 

1555 S 7th St., Bldg A, San Jose, CA 95112-5930 

From Candescent Technology Corporation: Start 

by going left on Via Del Oro. Turn left on Great 

Oaks Blvd. Turn left to take the CA-85 North 

ramp. Take the CA-87 North exit towards 

Downtown San Jose. Merge on CA-87 North and 

exit Curtner Ave. Turn right on Curtner Ave. Turn 

left on Montery Rd./S. 1st St. Turn right on Phelan 

Ave. Turn left on S. 7th St. 

Suggested Lodging 

Holiday Inn - 1.408.972.7800 

Extended Stay America - 1.408.226.4499 

Residence Inn - 1.408.226.7676 

Studio Plus - 1.408.229.9188 

Auctioneer’s Note 

DoveBid is extremely pleased to have been selected by 

Candescent Technologies Corporation to conduct a Liquidation 

followed by a Webcast Auction of a 70,000 Sq. Ft. Flat Panel 

Display Development Technology Facility. This event features a 

large quantity of equipment, including: 

• Flat Panel Display Development/Manufacturing Related Tools 

& Equipment 

• Optoelectronics Related Capital Equipment 

• MEMS, Nano Devices & Subatomic Equipment Related Tools, 

Systems & Instrumentation 

Phase 1 of the sale will be conducted as an Orderly 

Liquidation/Negotiated Sale, with final bids due Nov. 8. During 

this phase, assets are available for preview by appointment only 

Sept. 16 through Nov. 7. Phase II will be a Webcast Auction of 

remaining assets on Nov. 14 in San Jose, CA with a preview held 

on Nov. 13, 9am – 4pm. Feel free to attend the preview in 

person or visit our website at www.dovebid.com to download an 

equipment catalog. 

Thank you in advance for your interest and we look forward to 

your participation in this world class event. 

® Unsure how a Liquidation works No problem. 

Liquidations are different than traditional auction 

events in that items are not sold on an auction block 

at the fall of a hammer. Instead, the Seller offers the 

items for sale over a longer period of time to give 

Buyers the maximum flexibility to participate. 

Participating in a Liquidation is easy. Simply inspect the assets for sale, select the items you 

wish to purchase, and then either email us your bid using our online Bid Submission Form 

or discuss pricing with our agent. Sometimes an "ask-and-take" price is established for 

each item; other times we will invite you to make your best offer. Our agent is always 

happy to review any bid submitted and will notify you promptly whether the offer has 

been accepted. We invite you to submit your offer today! 

Here’s how to participate: 

• Review the assets on-location or online at www.dovebid.com 

• Email a Bid Submission Form, which is available online at www.dovebid.com, or contact 

Tim Powers at tpowers@dovebid.com 

• All bids must be full conformance with the Terms and Conditions on the Bid Submission 

Form – and bids that are not submitted in full conformance will be disqualified. 

Further information – For information regarding the liquidation process or procedures, 

please contact Tim Powers at tpowers@dovebid.com. 

2 

Additional Information 

• Bid live in person or on the website at 

www.dovebid.com 

• A buyer’s premium will apply at this sale 

• The auction will be conducted in English and 

will accept only U.S. currency 

® Can’t make it to San Jose, CA No problem. With 

DoveBid’s proprietary Webcast technology bidders 

around the world can bid at this auction from the 

convenience of their home or office through the 

Internet. Webcast technology allows you to virtually 

bid against bidders who are on the factory floor. 

Log on to www.dovebid.com and register even on auction day to bid in real time! All you 

need is a computer, Internet access, and a touch-tone telephone to participate. 

Prior to the auction, preview the assets online via digital photos and comprehensive 

descriptions. During the auction, view the current asset being sold on your computer screen 

as you listen to the Auctioneer live on your telephone. You press 1 on the telephone keypad 

to raise your paddle and press the # key to end your bid. And as a courtesy to our Web 

buyers, DoveBid can provide contact information for shipping companies that will be 

attending the auction. Thousands of bidders from hundreds of locations around the globe 

have participated in DoveBid Webcast Auctions. It’s fast, simple and convenient! Save 

money on travel expenses and next time we will see you ONLINE! 

To view a complete asset list visit our website @ www.dovebid.com

® 

® 

3 

To schedule an auction call 800.343.3683 x2621

Deposition • Thin Films • 

• 

APPLIED KOMATSU TECHNOLOGY 

AKT-1600 PECVD SYSTEM, Used for 

Nitride and ILD; 4-Chamber Tool with (4) 

Edwards QDP Dry Pumps; 6-gas 

Distribution Panel; Delatech 858 V-4 

Exhaust Gas Conditioner; Spare parts 

also available. 

KURDEX V3000 IN-LINE SPUTTERING 

SYSTEM with (3) CTI-Cryogenics On 

Board 10 Cryo Pumps; Ebara Dry Pump 

Model A10S; (3) CTI-Cryo 9600 Helium 

Compressors; RF Power Products RF20S 

& RF30S Controller/Powers Systems; 

Varian Turbo V70 Vacuum Pump; Quadlink 

HQ100 

WATKINS JOHNSON ATMOSPHERIC 

PRESSURE CHEMICAL VAPOR 

DEPOSTION SYSTEM Model 

16CVD250-51 with Computer, Monitor, 

Keybord, Black Box, Table; Eagle Safety 

Storage Cabinet; Cabinet of Spare Parts; 

Slurry Separation Tank; Advan Flat 

Screen Monitor 

4 

CUSTOM PHYSICS RESEARCH TEST VACUUM 

CHAMBER ELECTRON INDUCED DESORPTION 

MEASUREMENT SYSTEM 


CHAMBER THERMAL DESORPTION SYSTEM 


Deposition • Thin Films • • 


CHAMBER GETTER SORPTION SYSTEM 

BROOKS AUTOMATION CLUSTER PLATFORMS: 

HERCULES 7500 (H7500) CLUSTER TOOL INTEGRATION PLATFORMS WITH 

MAGNATRAN 70B SUBSTRATE TRANSFER ROBOT, TWO VCE-40 VACUUM 

CASSETTE ELEVATOR LOAD LOCKS, ONE TCM-20 DEGAS MODULE FOR 

PREBAKING SUBTRATES TO 400 C, AND SUPPORTING SOFTWARE. 

CUSTOM PHYSICS RESEARCH TEST 

VACUUM CHAMBER BREAK IN SYSTEM 

CUSTOM PHYSICS RESEARCH TEST 

VACUUM CHAMBER TIME-OF-FLIGHT 

MASS SPECTROMETRY SYSTEM 

PERKIN-ELMER 4400 PRECISION 

SPUTTERING SYSTEM 

PVI VACUUM BAKE OVEN WITH 

VARIAN V700HT TURBO. 

CHAMBER 25" X 21" X 33", TEMP. 

435 DEGREES C ± 5 DEGREES 

5 


Dry Etch • 

LAM CONTINUUM PLASMA ETCH 

TOOL, With (3) Process Modules and 

Capability of a Fourth; Designed to 

Manipulate Two Cassettes of Panels 

Using a Dual Paddle Arm; There are 

(3) Lam 2080 TCU Temperature 

Controllers; (2) Leybold DRYVAC 

Pumps; (1) QDP40 Edwards with 

Interface Module; (1) iQPD40 Edwards 

Vacuum Pump; (1) iQPD80 Edwards 

Vacuum Pump with Interface module; 

(4) SPM Monitors; Exposed Gas 

Panels; Spare Parts also available. 

Wet Benches • 

UNIVERSAL PLASTICS 4859-001 

AUTOMATED WET BENCH 

CLEANLINE/PLATING STATION is an 

Advanced Product-Processing Tool; 

Uses an Automatic Transfer Arm 

(ATA) to Raise and Lower Product In 

and Out of the Process Tanks. 

ULTRA FAB TECHNOLOGY, INC. 

AUTOMATED PROCESS CLEANING 

STATION with (9) Cleaning Tanks; Cybeq 

Robotic Transfer Mechanism; Best Powers 

Ferrups Series Power Supply Model FE4- 

3KVA; Aquarius Heat Flex MDI-9200-3V- 

03-04; Meissner Filter; Aquarius Ultra- 

Pure DI W 

SHIBAURA/SHIBATEC FLAT PANEL 

GLASS WASHING SYSTEM, 

Compatible for Multiple Size Panels; 

SUBSTRATE CLEANING SYSTEM 

with Loader and Unloader Cassette 

System 

6 

ULTRASONIC AQUEOUS 

CLEANING SYSTEM Model ACS-25- 

US, S/N 770239-K9A; with Safety 

Loading Step; Some Manuals 


Furnaces • 

VWR HEAT TREAT OVEN 

ASTRO CERAMIC CHAMBER FURNACE 

Model CPF-4060-WM, S/N F9606027 with 

Leybold D65B 53CFM TRIVAC Pump; 900kW 

Designed for Continuous Operation at 1750 

degrees Celsius in Wet or Dry Hydrogen, 

Inert Gas, and Any Other Reducing 

Atmosphere at a Pressure of +2 psig 

SIERRA THERM VERTICAL LIFT TYPE 

HEAT TREAT FURNACE, Multiple Zone, 

Electrically Heated, Forced Convection 

Batch Oven Capable of Operating to 1000 

Degrees Celsius; Includes a Controlled Air 

Atmosphere System, (4) Heated Zones, 

and Some Manuals 

SIERRA THERM CONVEYOR TYPE HEAT 

TREAT FURNACE 12-ZONE SYSTEM 

BLUE M GLASS PANEL BAKE OVEN 

Dicing • 

CHAVALIER FSG-1628TX II DICING SAW 

MTI MSS 816 DICING SAW, 

Equipped with MTI Assist: an 

Integrated Program Designed to 

Provide High Accuracy Angular 

Alignment of Parts Mounted on 

the Rotary Table of an MTI 

Precision Slicing Machine 

7 


Inspection • 

JSM-820 SCANNING ELECTRON 

MICROSCOPE, a State-of-the-art High 

Resolution Scanning Electron 

Microscope; Full Functions of a 

Scanning Electron Microscope and may 

also be used to Observe IC Wafers; 

Performs Well at Low Accelerating 

Voltages and Provides High Quality 

Secondary Electron Images without 

Damaging IC Wafers; Also very useful 

in Photoresist Evaluation; Some 

Manuals 

JEOL JSM-6320F, Basic Unit Consists of an 

Electron Optical Column Mounted on the 

Main Console, a Control and Display System, 

a Power Supply Unit, a SIP/BAKEOUT Power 

Supply, and an Oil Rotary Pump; Main 

Console Incorporates a Vacuum System; 

Control and Display System Incorporates the 

Control Panels, Keyboard, Display System, 

Photographic Recording System (Recording 

CRT, VHR Camera, and Film Holder), etc. 

Power Supply Unit is Placed at the Back of 

the Control and Display System. 

GS VIEW VOYAGER V1824X 

NON-CONTACT, THREE- 

DIMENSIONAL MEASUREMENT 

SYSTEM with a full range of 

Vision-Based Tools and Software; 

Proprietary Edge-Detection and 

Image Acquisition 

NANOMETRICS NANOSPEC 5500 

INSPECTION STATION, Thickness 

Measuring System in Nanometers; 

Ellipsometric and Environmental 

Parameters as follows: Data taken from 

400-800nm Scan of Variable Angle 

Spectroscopic Ellipsometer; Wavelength 

= 632.8nm plus or minus 

DISPLAY TECHNOLOGY SYSTEMS 

EMISSIONS TEST SYSTEM 

8 

GAERTNER ELIPSOMETER 

FSM 128G FILM STRESS MONITOR 

NIKON OPTISHOT 300 

MICROSCOPE WITH CCD, 

MONITOR AND PRINTER 


Inspection • 

ORBOTECH LC 3090 OPTICAL INSPECTION 

SYSTEM for flat panel displays; Software Non- 

Transferable For This Tool 

ORBOTECH LC 3050 OPTICAL INSPECTION 

SYSTEM for flat panel displays; Software Non- 

Transferable For This Tool 

LEICA INSPECTION SCOPE WITH 

CCD, SONY MONITOR AND PRINTER 

NIKON CD MEASUREMENT TOOL - 

CRITICAL DIMENSION 

PANEL INSPECTION SCOPE WITH 

TMC ISOLATION TABLE 

THE MAGNA-IR 560 E.S.P., FT-IR 

SPECTROMETER, Provides Superior 

Performance to Meet Even the Most 

Demanding IR Sampling Requirements 

MEIJI INSPECTION SCOPE 

WITH CCD, SONY MONITOR 

AND PRINTER 

N & K ANALYZER 1512-RT 

9 


Photolithography • 

NEW-LONG LZ-9846 SCREEN PRINTER 

MRS MODEL 5000 PANEL PRINTER, 

Advanced Microlithography System 

Designed to Meet the Critical Resolution, 

Overlay, Stiching, and Throughput 

Requirements of Large Area, High 

Resolution and High Volume Flat Panel 

Display Manufacturers 

HIGH EXPOSURE FLOOD 

SYSTEM 

UV LIGHT 

Solvent Tool • 

CW PRICE SCREEN PRINTERS 

SEMITOOL CENTURIUM C1-S1 PROCESS 

AUTOMATION AND CONTROL SYSTEM 

STI - SEMI TOOL SOLVENT TOOL - 

SST518AG & WST518AG 208VAC, 15A 

Implantation • 

10 

EATON DF 3000 IMPLANTER - Incomplete Assembly for Parts 


Coaters • 

ALSO AVAILABLE: 

(3) BOC Evaporator Systems 

that were never completed. All 

parts are available for auction 

except for the chambers that are 

not assembled. 

BOC EVAPORATOR - TEMESCAL 

FCE-2500 CLEAN-ROOM- 

COMPATIBLE LOAD-LOCK SYSTEM, 

with Fully Automated or Manual 

Touchscreen Control; Pumping 

Package Consists of an Edwards Model 

E2m80 Mechanical Vacuum Pump and 

(2) CTI-8 Cryopumps 

BOC EVAPORATOR - TEMESCAL 

STIH-270-2MB FOUR HEARTH 

ELECTRON BEAM SUPERSOURCE 

with CTI-Cryo 8200 & 1020R 

Compressors; (2) Electrodrives LTD 

Vacuum Pump; Temescal Simba 2 

with interface 

FAS Technologies pioneered a new 

technology when it invented and began 

marketing the First Electro-Hydraulic 

Digital Fluid Dispense System, (patented) 

in 1988. This innovative technology has 

allowed the industry to achieve a 

quantum level improvement in precisely 

filtering and dispensing costly high purity 

fluids such as photoresist and polymide. 

FAS TECHNOLOGIES THICK FILM 

EXTRUSION COATER 

FAS TECHNOLOGIES PRECISION 

EXTRUSION COATER, S/N 53000 

Flat Panel, 120VAC, 15 amp, 60Hz 

SSEC MODEL 55 FLAT PANEL 

DISPLAY PROCESSOR WITH DUAL 

ROBOTIC HANDLERS 

CONVAC LCTV AUTOMATIC 

COATING SYSTEM, With Stacked 

HMDS, Stacked Hotplates, and 

Stacked Coolplate Modules; Spin 

Process Station Designed for the 

Coating of 400mm2 Substrates 

with a Thickness of 1-5mm; 

Coating Processes can be 

Performed using Resist of Various 

Properties 

11 


Test and Measurement • 

TENCOR P-10 SURFACE PROFILER 

KLA ACROTEC 6010 AUTOMATED 

FLAT PANEL INSPECTION 

SYSTEM, an Automated Defect 

Inspection System for TFT LCD; 

Uses High Speed Image Processing 

Technology; Pattern Defects and 

Process Problems Easily Detected in 

a Short Period of Time; Computer 

Console, Laminar Table 

AFM - ATOMIC FORCE 

MEASURING SYSTEM, Auto Probe 

M5 Scanning Probe Microscope 

made by Veeco; the rest 

built/assembled by Integrated 

Dynamics Engineering 

TENCOR FP-20 LONG SCAN 

PROFILOMETER 

FOUR DIMENSIONS AUTOMATED 

4-POINT PROBE, Auto Mapping 

System Model 1100-d, an Automatic 

Sheet ResistanceTesting System 

Designed for the Measurement of 

Conductive Films on Flat Panels or 

Large Silicon Wafers 

12 

TENCOR MODEL FLX 2320 

FILM THICKNESS MONITOR 

ASSORTED TEST AND 

MEASUREMENT EQUIPMENT 


Acid Tool • 

Laser Saw • 

SEMITOOL (SAT) SPRAY 

ACID TOOL. Designed for 

a complete process. Acid 

Processing, Rinsing and 

Drying in a Single Batch 

Processor. Includes (4) 

Tank Chemical Delivery 

System 

CONVERGENT 

ENERGY GEMINI 

LASER CUTTING 

SYSTEM 

Bonders • Developer • 

TODDCO GENERAL, INC. 

ACF 6000 TAB BONDER 

TODDCO GENERAL, INC. 

RSM 4000 TAB BONDER 

SSI (SEMI CONDUCTOR SYSTEMS, 

INC.) DEVELOP AND HARD BAKE 

SYSTEM 

Ashers • 

The YES-R3 HYBRID 

PLASMA CLEANING 

SYSTEM creates the 

ideal environment for 

plasma cleaning 

substrates. This 

system cleans more 

efficiently, with higher 

throughput, than 

other processing 

equipment or 

techniques. The YES- 

R3 Cleaning System 

is built to be safe, 

relaible, durable and 

operator friendly. 

The SAMCO MODEL 

UV-660 UV-OZONE 

STRIPPER/CLEANER 

is a versatile process 

tool which can be used 

for cleaning or stripping 

organic material such as 

solvent residues, 

photoresist, ink or 

polymide from a wide 

variety of substrate 

material. The system 

processes substrates at 

atmospheric pressure 

using a combination of 

UV light, ozone, and 

heat. 

13 


Grinders • 

MTI 1030 PRECISION TRUING AND 

DRESSING MACHINE with Micro-infeed 

System; 208 V, 3Ph, 60 Hz; (1) RSK Type 1 

Bench Center; (1) Box Accessories 

CUSTOM BUILT EDGE GRINDER 

PROTH SURFACE GRINDER 

Also Available • 

GSI LUMONICS GLASS PANEL CODING 

SYSTEM SYSTEM LASER MARKER, S/N 

13776, 1999 

CARVER H-PRESS 10-TON AUTO 

SERIES 

LOOMIS EXTRUSION TOOL 

16-TON PRESS 

OF SPECIAL INTEREST 

Taking offers prior to sale on 

80,000lbs of 304 high grade 

stainless steel 

14 

WALLACE TAPE CASTING MACHINE 

W/UV EXPOSURE 

VILLA PRECISION GLASS SCRIBE 


Also Available • 

PVI VACUUM SYSTEM TECHNOLOGY VAT 

RETORT SYSTEM with CTI-Cryo Onboard 8 

Cryopump; Ensor Engineering VAT Manual 

Assist Lifting Arm; Focus Networks Command 

View Model 121AA-001000; MKS Type 121 

Signal Conditioner; Pentium Computer 

LOOMIS EXTRUSION TOOL 40-TON 

PRESS 

TERRA UNIVERSAL DESICCATOR 

CABINETS 

ALSO AVAILABLE: 

• Microscopes 

• Electronic Test & Measurement 

• Metrology Tools 

• Vibration Isolation Tables 

• Lab Furnishings 

• Office Furnishings 

• Computers and More 

PLASTI-CORDER CW BRA-BENDER W/P- 

2100 CONTROLLER EXTRUSION TOOL 

YOTAGAWA PANEL CARRIERS 

Proxy Bids 

Can’t make it to San Jose, CA No problem. DoveBid can 

bid for you. 

How to place a proxy bid: 

• Go to the auction detail page Candescent Technologies at 

www.dovebid.com. 

• To place a proxy bid, click on the Equipment Catalog 

from the auction's details page and select the asset on 

which you want to bid. 

• On the bottom center of the page there is a yellow box. If 

the auction is currently accepting proxy bids, you will 

have the option to enter a price and quantity. 

NOTE: there is a $200 minimum bid for each lot. Proxy 

bids are not accepted within 19 hours of the start of an 

auction. 

Great Reasons to Buy at DoveBid Auctions 

There are many great reasons to buy assets at DoveBid 

auctions… 

• SAVE MONEY on purchasing used equipment rather 

than new equipment 

• SAVE TIME on waiting for new equipment to arrive by 

buying used equipment today! 

• CONVENIENCE - With DoveBid Webcast or Online 

auctions, you do not need to attend the auction to 

participate – you can participate online with our Webcast 

technology 

• ONE STOP SHOPPING– With DoveBid, buyers have 

access to a full range of assets at each auction. 

15 


Global Provider of Capital Asset Auction & Valuation Services 

Over $5 Billion assets sold in 5,000 auctions conducted worldwide and more than 10,000 appraisals produced. 

® 

Presorted 

First-Class Mail 

U.S. Postage 

PAID 

Burlingame, CA 

Permit No. 1 

Auctioneers, Sale Advisors & Appraisers 

Worldwide Headquarters 

1241 East Hillsdale Boulevard 

Foster City, California 94404 

650.571.7400 • Fax: 650.572.1502 

www.dovebid.com 

Customer Service 800.665.1042 

Return Service Requested 

by order of 

Phase I: Liquidation/Negotiated Sale 

September 16, 2002 - November 8, 2002 

Phase II: Webcast Auction 

November 14, 2002 • 9am PT 

San Jose, CA 

Liquidation of an Entire Flat 

Panel Display Manufacturing 

Facility 

Over 100 upcoming auctions • www.dovebid.com 

OCTOBER 23: THE ASSETS OF A MAJOR INTERNATIONAL 

MINING COMPANY – (WEBCAST) Massive Range of Surplus 

Construction, Electrical and Mechanical Hardware and Tools. Singapore 

OCTOBER 23: CTS WIRELESS – (WEBCAST) 

Electronic Test & Measurement, Semiconductor Fabrication, 

Telecommunications Equipment. Albuquerque, NM USA 

OCTOBER 23-24: EXCITE@HOME #3 - FINAL SALE – 

(WEBCAST) Telecom, Computer and Peripherals, and IT Equipment. 

California, USA 

OCTOBER 24: ELECTRONIC'S SERVICE – (ON-LOCATION) 

Liquidation Auction of Electrical and Machine Tools. Singapore 

OCTOBER 24: TEKTRONIX WEBCAST #3 – (WEBCAST) 

Tektronix Electronic Test and Measurement Equipment. 

Beaverton, OR USA 

OCTOBER 28: PHILIPS COMMUNICATION, SECURITY & 

IMAGING #6 – (ON-LOCATION) Telecommunication Equipment. 

Singapore 

OCTOBER 28: CAMBERWELL HONDA – (ON-LOCATION) 

Modern Automotive Service Workshop. Hawthorn East, VIC Australia 

OCTOBER 29: ESCORT ENGINEERING (ACCRINGTON) LTD – 

(ON-LOCATION) Excellent Quality CNC Machine Tools. 

Accrington, Lancashire, UK 

OCTOBER 29-30: A MAJOR TELECOMMUNICATIONS 

DISTRIBUTOR – (ONLINE) A Major Telecommunications 

Distributor - Short Notice Sale. DoveBid.com 

OCTOBER 30: MEDIMAGING TECHNOLOGY, INC. – (ONLINE) 

Medical Imaging Equipment: Featuring R2 Technology Inc. ImageChecker 

System - Still in Crate. DoveBid.com 

OCTOBER 30: VZS / SEAGOE ADVANCED CERAMICS – 

(ON-LOCATION) Machine Tools. Craigavon, Co. Armagh, Ireland 

OCTOBER 30: JDS UNIPHASE #6 (COLUMBUS, OH) – 

(WEBCAST) State of the Art Photolithography & Deposition 

Semiconductor Operation. Columbus, OH USA 

©2002 DOVEBID, ALL RIGHTS RESERVED • CAND4337 • CA Bond No. 57BSBAI7624 

Complete Terms & Conditions are contained in the Sale Catalog and on the website at www.dovebid.com. 

Please review the Terms and Conditions prior to placing bids on any items. Worldwide Headquarters: Foster City, California 

C A L I F O R N I A 

C 

A 

S 

IDEMA® 

MACHINERY DEALERS 

NATIONAL ASSOCIATION 

S E M I 

M E M B E R

Liquidation Of An Entire Flat Panel Display Manufacturing

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?