compatibility Buggypod io & Smorph.xlsx - Kiddicare

More documents

Recommendations

Info

Revelo does not guarantee that the Buggypod will fit every make and model of pushchair. Customers should always follow our guidelines: The Buggypod can be attached to most buggies and pushchairs including twin buggies and 3 wheelers. The strap of the mounting brackets can be tightened around most buggy and pushchair frames. The frames can be oval, square, round, thick or thin. Size 51 brackets fit frames up to 4 cm diameter. Size 70 brackets fit frames more than 4 cm diameter The Buggypod is supplied with a set of size 51 brackets included. Size 70 brackets are available to purchase separately. To assess whether the Buggypod will fit your pushchair, you should check that there are exposed fixture points on two major frame tubes on the right hand side of your pushchair. On the Buggypod Smorph, the rear fixture point needs to be approximately 35-43 cm from the floor. On the Buggypod iO, the rear fixture point needs to be approximately 32-45 cm from the floor. The front fixture point can be level with the rear fixture point or up to approx. 8 cm higher. Buggypod Smorph 2: Buggypod io: You cannot fit a bracket around two parallel telescopic tubes, as the tubes may slide alongside each other or split apart when folding pushchair (e.g. Bebeconfort Loola). You can fit the bracket on one telescopic tube if there is a gap of minimum 2 mm between the tubing (e.g. Mamas and Papas Pliko). Check that the mounting brackets, once fitted, do not interfere with the braking system or folding mechanism of the host pushchair. Check that the tube to which you are fitting the bracket is vertical (looking from the rear or front), so that the bracket and Buggypod will sit vertically too. 22
The front bracket can be fitted slightly higher than the rear bracket if it helps achieve a good connection. The Buggypod seat will then tilt back gently (as with many pushchairs) and you may in any case prefer that. You may find it helpful to look at the images of the Buggypod attached to a number of pushchair models in the Support pages at www.buggypod.com. If you are still unsure about whether the Buggypod will fit your pushchair, you can call our Helpline in the UK on 0870 850 3463 (M-F, 09:30-17:00) or email us at support@revelo.co.uk and we shall endeavour to help you. . Your local retailer may also be able to advise on fitting. 23
Page 1 and 2: BUGGYPOD COMPATIBILITY Pushchair gu
Page 3 and 4: Babywelt Express p p Booster GT4 p
Page 5 and 6: Joy not compatible not compatible S
Page 7 and 8: CT 04 p p CT 05 p p CT 05 Twin p p
Page 9 and 10: Twin City Cross Not compatible Not
Page 11 and 12: Tandem 6 p p Traxx Candy p p Traxx
Page 13 and 14: Solo Rebel p Mounting bracket posit
Page 15 and 16: Freestyler Not compatible. Hollow p
Page 17 and 18: Spin Not compatible Not compatible
Page 19 and 20: Vibe p p p p Quicksmart Easy Fold N
Page 21: Valco Aero p p Buggster p p Everest

compatibility Buggypod io & Smorph.xlsx - Kiddicare

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?