Marine Compressors Wave Series - Hertz-Kompressoren

Marine Compressors
Wave Series

QUALITY MAKES THE DIFFERENCE
Hertz’s is one of the leading manufacturers of marine compressors in worldwide since 1965. Rising demands of the shipowners to
reduce maintenance costs were the reasons for Hertz started developing starting-air compressors in 3-stage air-cooled design for
shipboard applications.
The simple way of cooling is also the reason for more and more shipyards to prefer air-cooled compressors. Beside thisthe weight
and space is smaller thus enabling lighter and less expensive foundations. The total ventilation of the ship hasnot to be increased.
The compressors have only to be taken into consideration in arrangement of the ventilation.
High-speed concentric plate valves
in each stage. Additionally, special
cooling fins in the 1st and 2nd stage
High performance,
2-stage air filter
High performance three-phase
A.C. motors, Upon request:
Diesel motor drive
The new W-Tpye compressor design;
Lower compression ratios and lower
outlet temperatures. Thus, lower
energy consumption and longer
service intervals up to
2000 hours.
Specially designed cooling system:
In addition to 1st and 2nd-stage
inter-coolers, oil cooler and
3rd-stage after-cooler are also
combined in extraordinary
bar-plate type high-pressure
aluminum radiator. Cylinders,
cylinder heads and compression
valves are also cooled by this new
cooling system.
Standard,
factory assembled
Control panel:
Including electronic
controller which monitors
outlet temperature and
pressure and also oil
pressure. Moreover it
controls maintenance
intervals and all
operational parameters.
Additional
temperature and
pressure gauges for
each stages.
Directly assembled fan and oil pump
to the crankshaft.
Corrosion and impact resistant composite
canopy for acoustic insulation and better
cooling performance evening harsh
conditions up to 60ºC.
High capacity oil filter which
can be accessed from outside
for easy service.
High pressure water separator
for compressed air outlet.
Water is drained automatically
by the electronic controller.
Integrated flexible coupling,
low-maintenance and safe
operation.
General Advantages
• Final pressure max. 45 bar
• Suitable for continuous running 24 hours by 24 hours
• Lower energy consumption
• Longer service intervals up to 2000 hours
• Factory installed electric control panel including electronic controller, non-return valve, high pressure air outlet
hose (2,5m) and water-drainage hose (1,5m)
GENERAL DATA TECHNICAL DATA FOR A FINAL PRESSURE OF 40 BAR DIMENSIONS (mm)
TYPE
MAX. WORKING
PRESSURE
(BAR)
NUMBER OF
CYLINDERS
NUMBER OF
STAGES
SPEED
rpm
FREQUENCY
(Hz)
CAPACITY
m3/hour
CAPACITY
L/min
POWER
CONSUMPTION
(kW)
WEIGHT
(kg)
(Including all
accesories and
control cabinet)
LENGTH
WIDTH HEIGHT
1170
60
132.7
2213
19
HW-166 40 3 3
1470
50
166.7
2778
25
630 1580 1175 1100
1770
60
200.7
3345
31
**Availability 50/60 hz, 132.7 m³/hour-200.7 m³/hour
HEADQUARTER
HERTZ KOMPRESSOREN GmbH
59227 Ahlen, In der Schlinge 6
Phone: +49 2382 940 63 83 / +49 940 63 84
Fax : +49 2382 940 84 90
www.hertz-kompressoren.com
export@hertz-kompressoren.com
HERTZ KOMPRESSOREN LTD.
Unit 12-13 Peel Mills Industrial Estate
Chamberhall Street Bury Manchester BL9 OLU
United Kingdom
Phone: +44 161 764 41 60
www.hertz-kompressoren.com
export@hertz-kompressoren.com