Anton/Bauer Catalog 2012

PowerTap Cables And Adapters For Use
With All Gold Mounts
p o W ert ap o pen e n d
a 3 foot (.91m) power cable that mates with the powertap receptacle in any gold
Mount. can be used to power any 12-17 volt accessory (wireless receiver, hard
drive, etc.) from the camera battery. customer must install connector to match the
specific accessory power input. (10 amp. max.).
PowerTap Extension
p o W ert ap eXtenSIon
7 foot (2 m) cable with powertap Male on one end and powertap Female at
the other. allows the extension of any powertap equipped device from the
gold Mount.
p o W ert ap MultI
Male powertap to 4 Female powertap receptacles. expands any gold Mount
powertap to accommodate up to four separate devices. perfect for powering
multiple wireless receivers, on-board monitors as well as an ultralight from a
single camera battery (10 amp max total).
PowerTap Multi
p o W ert ap cl
powertap Male to universal female cigarette lighter connector. plug into powertap
on any gold Mount and power virtually any device - cell phone, ipod, cd player or
laptop using the device’s automobile adapter cable from a camera battery.
p o W ert ap kIt
kit includes Male powertap components, pins and housing (cable not included).
FeM ale p o W ert ap kIt
kit includes Female powertap components, pins and housing (cable not included).
p o W ert ap FS4
14” powertap cable. plugs into gold Mount bracket to provide power to the
dr-hd100 hard disk drive.
PowerTap CL
p o W ert ap l ectro
8” powertap cable to power most lectrosonics wireless receivers.
p o W ert ap Xlr
cables for connecting any 14V accessory (monitor, teleprompter, etc.) with a 4p
Xlr Female to the powertap receptacle on the gold Mount. available in 36, 28, 20
and 9 inch lengths.
Refer to PRODUCT APPLICATIOn GUIDE at the back of the catalog for a complete listing
PowerTap Lectro