Anton/Bauer Catalog 2012
Anton/Bauer Catalog 2012
Anton/Bauer Catalog 2012
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wireless Receiver Mounting Back Plates<br />
u n IVerS al Bp<br />
Back plate for all Ikegami, panasonic, hitachi and grass Valley cameras for mounting<br />
wireless receiver plates to factory supplied version gold Mount on dVcpro and p2<br />
type cameras.<br />
JVc -Bp<br />
Back plate for mounting a wireless receiver plate to a Q-X2, Qr-JVc auto, or Qr-JVc dIgI<br />
gold Mount.<br />
Wireless Receiver Mounting<br />
a BWMk - k I t<br />
universal wireless receiver mounting kit attaches directly to the metal plate of any gold<br />
Mount to mount any type of wireless receiver or hard drive. adjusts to closely fit to camera<br />
with any logic Series Battery on the side or behind the battery.<br />
note: Wireless mounting back plate may be needed as specified in above section.<br />
ABWMK-KIT with WRB-200<br />
a BWMk -SI<br />
universal wireless receiver side mounting plate only. unit attaches directly to the metal<br />
back plate of any gold Mount to mount any type of wireless receiver or hard drive along side<br />
the battery.<br />
W r B-185*<br />
Wireless receiver box which holds any wireless receiver similar to lectrosonics style #crt-<br />
175, 185 or 187 and ucr190.Size (inside dimensions): 4”h x 3”l x 1.25”W (10 x 7.5 x 3.49 cm)<br />
W r B-201*<br />
Wireless receiver Box which will hold any wireless receiver similar to lectrosonics style<br />
#ucr-201 or ucr-401. Size (inside dimensions): 3.97”h x 2.96”l x 1.37”W (10 x 7.5 x 3.49cm)<br />
W r B - 2 0 0 *<br />
Wireless receiver box which will hold any wireless receiver similar to lectrosonics style #<br />
ucr-195, ucr-195d, ucr-200, uc-210, ucr-211, ucr-411, ucr-205 and aJa model hd10a<br />
and hd 10Md3. Size (inside dimensions): 4”h x 3.5”l x 1.37”W (10.1 x 8.8 x 3.45cm)<br />
*Must be used in conjunction with an ABWMK-KIT and ABWMK-SI.<br />
QR-WRB-25<br />
Q r -Wr B-25<br />
Wireless receiver box fits between logic Series Battery and camera gold Mount to accept<br />
any 25¬pin insert style wireless receivers (such as Sennheiser #ek-3241, ek-3041, raMSa<br />
#WX-rM770, tSp #Wd-900r or lectrosonics Sr Series W/SrunI adapter.) the Qr-WrB-25<br />
also provides an extra slot for an additional receiver for cameras already equipped to accept<br />
one receiver. adds only 1” to camera length. the receiver uses power from camera battery.<br />
Standard 3p Xlr audio out connector. Size: 5.75”h x 3.80”l x 2.38”W (14.5 x 9.7 x 5.8cm)
Change language