Hohmann Retractor Holder - Synthes
Hohmann Retractor Holder - Synthes
Hohmann Retractor Holder - Synthes
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Hohmann</strong> <strong>Retractor</strong> <strong>Holder</strong>.<br />
For minimally-invasive percutaneous<br />
plate osteosynthesis.<br />
Easy to use<br />
Minimally invasive<br />
Modular
<strong>Hohmann</strong> <strong>Retractor</strong> <strong>Holder</strong>.<br />
For minimally-invasive percutaneous<br />
plate osteosynthesis.<br />
Properties<br />
The <strong>Hohmann</strong> retractor holder was developed to support minimallyinvasive,<br />
percutaneous plate osteosynthesis. Its unique design enables<br />
the easy and reliable percutaneous insertion of plates. These characteristics<br />
make the <strong>Hohmann</strong> retractor holder the ideal instrument<br />
for use in combination with modern implant systems such as LCP<br />
and LISS.<br />
– The <strong>Hohmann</strong> retractor holder allows better visualization of the<br />
inserted plate.<br />
– Serves as a guide for the inserted plate<br />
– Ensures that the inserted plate is centered on the bone<br />
Preparation for surgery<br />
To ensure a problem-free surgical procedure, take the following<br />
steps before starting.<br />
– Affix the end pieces of the <strong>Hohmann</strong> <strong>Retractor</strong> <strong>Holder</strong> to the<br />
bone levers. Make sure that the fastening screws for the end pieces<br />
are tight, and that the bone levers are affixed in the right<br />
position (see mark on end piece)<br />
– Premount the <strong>Hohmann</strong> retractor holder in the desired position
Use during surgery<br />
Insert the bone levers sequentially so that the end pieces of the<br />
<strong>Hohmann</strong> retractor holder are aligned with each other. (1+2)<br />
1<br />
2<br />
The surgeon then holds the end pieces in one hand while sequentially<br />
connecting the premounted <strong>Hohmann</strong> retractor holder to the<br />
bone levers.<br />
3<br />
The <strong>Hohmann</strong> retractor holder can be aligned in the optimum<br />
position for surgery.<br />
4
<strong>Hohmann</strong> <strong>Retractor</strong> <strong>Holder</strong>.<br />
For minimally-invasive percutaneous<br />
plate osteosynthesis.<br />
Detailed pictures<br />
Product description<br />
The retractor holder is a modular instrument<br />
that can be assembled to a maximum<br />
length of 15 cm. It consists of a moveable<br />
middle section, four extension pieces (two<br />
short and two long), and two end pieces.<br />
A "click-in” mechanism allows easy and reliable<br />
assembly.<br />
Middle piece Extension pieces End pieces<br />
Bone levers<br />
The <strong>Hohmann</strong> retractor holder can be used<br />
with all <strong>Synthes</strong> standard bone levers. We<br />
recommend using the new 30° angled bone<br />
lever since it enables optimum visualization<br />
for the surgeon.<br />
<strong>Hohmann</strong> bone lever<br />
Ordering information<br />
Instrument<br />
387.585 <strong>Holder</strong> for <strong>Hohmann</strong> <strong>Retractor</strong><br />
Bone Lever<br />
399.205 Bone Lever, width 8 mm, 30°, curved, left<br />
399.206 Bone Lever, width 8 mm, 30°, curved, right<br />
399.200 Bone Lever, width 8 mm, length 220 mm<br />
399.210 Bone Lever, width 18 mm, length 235 mm<br />
399.220 Bone Lever, width 43 mm, length 240 mm<br />
399.230 Bone Lever, width 70 mm, length 240 mm<br />
399.240 Bone Lever, width 43 mm, length 235 mm<br />
399.250 Bone Lever, width 22 mm, length 250 mm<br />
399.280 Bone Lever, width 24 mm, length 270 mm<br />
Presented by:<br />
036.000.219 SE_023798 AA © <strong>Synthes</strong> 2005 Printed in Switzerland LAG Subject to modifications.