TRAY CABLE/CONTROL CABLE - Priority Wire & Cable

TRAY CABLE/CONTROL CABLE
Type TC, UL 1277 Article 340
XHHW (VW-1) Insulation Hypalon ® Jacket
Copper Conductors 600 Volt 90°C
Application: Control, power, lighting, and signal multi-conductor circuits, rated 600 Volts.
Installation: In cable trays, raceways, suspended with messenger wire, and direct burial, in industrial plants in cable tray in hazardous
areas per NEC Articles 318 and 501. • May be installed in both wet or dry locations or in areas exposed to chemicals and oils.
• Maximum Conductor Temperatures (continuous): XHHW Wet locations: 75°C, XHHW Dry locations: 90°C,
RHH-2 Dry locations - 90°C, • Ampacity: See Ampacity Tables located in Technical Reference Section in this catalog.
Specifications: • Conductors: Soft, tinned annealed copper per ASTM B-33, Class B stranding per ASTM B-8. Sizes 14 AWG - 12
AWG • Insulation: Flame-retardant cross-linked polyethylene. • Assembly: Conductors are cabled together with or without fillers as
required to form a round, compact cable core and with a binder tape. • Grounding Conductors: when required per UL Standard
1277, bare copper ground wires. • Cable Jacket: Sunlight resistant (CSPE) Hypalon rated 90°C per UL Standard 1277.
• Flame Test: Cable passes IEEE 383 vertical tray ribbon-burner flame test (210,000BTU).
Catalog No. Size No. of No. of Insulation Jacket Overall Net
AWG Conductors Strands Thickness Thickness Diameter Weight
Mils Mils
P01L11** 14 2 7 30 45 .230 x.367" 73 lbs/mft
P02L11 14 3 7 30 45 .387" 109 lbs/mft
P03L11 14 4 7 30 45 .423" 123 lbs/mft
P04L11 14 5 7 30 45 .462" 158 lbs/mft
P05L11 14 7 7 30 45 .504" 189 lbs/mft
P06L11 14 9 7 30 60 .617" 257 lbs/mft
P07L11 14 12 7 30 60 .677" 318 lbs/mft
P08L11 14 19 7 30 60 .808" 545 lbs/mft
P09L11 14 25 7 30 80 .958" 691 lbs/mft
P10L11 14 30 7 30 80 1.039" 801 lbs/mft
P11L11 14 37 7 30 80 1.122" 940 lbs/mft
P12L11** 12 2 7 30 45 .250 x.407" 90 lbs/mft
P13L11 12 3 7 30 45 .430" 144 lbs/mft
P14L11 12 4 7 30 45 .471" 184 lbs/mft
P15L11 12 5 7 30 60 .546" 233 lbs/mft
P16L11 12 7 7 30 60 .594" 286 lbs/mft
P17L11 12 9 7 30 60 .689" 335 lbs/mft
P18L11 12 12 7 30 60 .758" 446 lbs/mft
P19L11 12 19 7 30 80 .948" 735 lbs/mft
P20L11 12 25 7 30 80 1.075" 921 lbs/mft
P21L11 12 30 7 30 80 1.167" 1080 lbs/mft
P22L11 12 37 7 30 80 1.262" 1332 lbs/mft
* Shipping Tolerances+/-10%
** Flat Construction

TRAY CABLE/CONTROL CABLE
Type TC, UL 1277 Article 340
XHHW (VW-1) Insulation Hypalon® Jacket
Copper Conductors 600 Volt 90°C
Specifications: • Conductors: Soft, tinned annealed copper per ASTM B-33, Class B stranding per ASTM B-8.
Size 10 AWG.• Insulation: Flame-retardant cross-linked polyethylene. • Assembly: Parallel construction for 2 conductors only.
Multiple conductors are cabled together with or without fillers as required to form a round, compact cable core and with a binder
• Shield: When required, is an Aluminum-mylar tape with a copper drain wire applied over the cable. • Cable Jacket: Sunlight
resistant (CSPE) Hypalon rated 90°C per UL Standard 1277. • Flame Test: Cable passes IEEE 383 vertical tray ribbon-burner flame
test (210,000BTU).
Catalog No. Size No. of No. of Insulation Jacket Overall Net
AWG Conductors Strands Thickness Thickness Diameter Weight
Mils Mils
P01L12** 10 2 7 30 45 .274x.455" 127 lbs/mft
P02L12 10 3 7 30 45 .482" 185 lbs/mft
P03L12 10 4 7 30 60 .559" 246 lbs/mft
P04L12 10 5 7 30 60 .611" 309 lbs/mft
P05L12 10 7 7 30 60 .666" 362 lbs/mft
P06L12 10 9 7 30 60 .776" 499 lbs/mft
P07L12 10 12 7 30 80 .896" 673 lbs/mft
P08L12 10 16 7 30 80 1.013" 836 lbs/mft
P09L12 10 19 7 30 80 1.068" 953 lbs/mft
P10L12 10 25 7 30 80 1.214" 1260 lbs/mft
P11L12 10 30 7 30 80 1.321" 1525 lbs/mft
P12L12 10 37 7 30 80 1.430" 1900 lbs/mft
* Shipping Tolerances+/-10%
** Flat Construction