Liquid Sodium Borohydride MSDS - Corning Incorporated
Liquid Sodium Borohydride MSDS - Corning Incorporated
Liquid Sodium Borohydride MSDS - Corning Incorporated
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Material Safety Data Sheet<br />
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION<br />
Material Name:<br />
<strong>Liquid</strong> <strong>Sodium</strong> <strong>Borohydride</strong><br />
Manufacturer Information<br />
<strong>Corning</strong> <strong>Incorporated</strong> Phone: (607) 974-0234<br />
Life Sciences Emergency #<br />
271 County Road 64 24 Hr CHEMTREC: (800) 424-9300<br />
Big Flats, NY 14814 24 Hr CHEMTREC International: (703) 527-3887<br />
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS<br />
CAS # Component Percent<br />
143-24-8 Tetraethylene glycol Dimethyl Ether 80-90<br />
16940-66-2 <strong>Sodium</strong> borohydride 10-15<br />
Component Information/Information on Non-Hazardous Components<br />
This product has been evaluated under the criteria specified in 29 CFR 1910.1200 (Hazard Communication<br />
Standard).<br />
SECTION 3 . HAZARDS IDENTIFICATION<br />
Emergency Overview<br />
Product is a clear liquid. Component (<strong>Sodium</strong> borohydride) may react with water to release flammable gases.<br />
Contact with this material can cause burns to the eyes, skin, respiratory system and gastrointestinal tract. Prolonged<br />
or repeated exposure may cause headache, nausea, drowsiness, dizziness, and kidney and liver damage.<br />
Product may cause allergic skin sensitization reactions.<br />
Potential Health Effects: Eyes<br />
Contact can cause moderate to severe irritation and possible burns to the eyes.<br />
Potential Health Effects: Skin<br />
Skin contact with this product may result in severe irritation or skin burns. Prolonged or repeated contact may<br />
cause headache, drowsiness, dizziness, blood disorder and kidney and liver damage. Product may cause allergic<br />
skin sensitization reactions.<br />
Potential Health Effects: Ingestion<br />
Ingestion of this product is unlikely. However, if ingested, severe gastrointestinal irritation may occur with<br />
more serious symptoms developing upon ingestion of larger amounts. May cause dizziness, incoordination,<br />
headache, nausea, and vomiting. Prolonged or repeated ingestion may have effects on the liver and kidney.<br />
Potential Health Effects: Inhalation<br />
Inhalation of vapors of this product may cause severe irritation and burns to the respiratory tract. Inhalation of<br />
mists or vapors can lead to nausea, vomiting, diarrhea, headache, drowsiness, dizziness, lung congestion. Acute<br />
or prolonged inhalation can lead to central nervous system depression and liver and kidney damage.<br />
HMIS Ratings: Health: 3* Fire: 0 Reactivity: 2 Pers. Prot.: Safety glasses, gloves<br />
Hazard Scale: 0 = Minimal, 1 = Slight, 2 = Moderate, 3 = Serious, 4 = Severe, * = Chronic hazard<br />
Page 1 of 6 Issue Date: 4/20/06 Version 1
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 4 . FIRST AID MEASURES<br />
First Aid: Eyes<br />
In case of contact, immediately flush eyes with large amounts of water, continuing to flush for 15 minutes.<br />
Seek medical attention immediately.<br />
First Aid: Skin<br />
Immediately flush exposed area with large amounts of water while removing contaminated clothing. Get<br />
medical attention if irritation persists. Launder contaminated clothing before reuse.<br />
First Aid: Ingestion<br />
If ingested, get immediate medical attention. Do not induce vomiting unless instructed to do so by medical<br />
personnel.<br />
First Aid: Inhalation<br />
If inhaled, remove person to fresh air. If symptoms develop or persist, get medical attention. Call a physician<br />
immediately if any difficulty in breathing is observed.<br />
First Aid: Notes to Physician<br />
None.<br />
SECTION 5 . FIRE FIGHTING MEASURES<br />
General Fire Hazards<br />
See Section 9 for Flammability Properties.<br />
Product is a slight fire hazard. Component (<strong>Sodium</strong> borohydride) may react with water to release flammable<br />
gases.<br />
Hazardous Combustion Products<br />
Oxides of Carbon and Boron; Hydrogen.<br />
Extinguishing Media<br />
Dry chemical powder<br />
DO NOT use water, foam, carbon dioxide or halocarbon extinguishers.<br />
Fire Fighting Equipment/Instructions<br />
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing<br />
apparatus, protective clothing and face mask.<br />
NFPA Ratings: Health: 3 Fire: 0 Reactivity: 2 Other: W (water reactive)<br />
Hazard Scale: 0 = Minimal, 1 = Slight, 2 = Moderate, 3 = Serious, 4 = Severe<br />
SECTION 6. ACCIDENTAL RELEASE MEASURES<br />
Containment Procedures<br />
Stop the flow of material, if this is without risk. Eliminate sources of ignition.<br />
Clean-Up Procedures<br />
Wear appropriate protective equipment and clothing during clean-up. Ventilate area. Sweep up material and<br />
place into a sealable, properly labeled container for disposal. Avoid creating dusts. Wash spill site after material<br />
pick up is complete. Do not flush washings to sewer or other waterways.<br />
Evacuation Procedures<br />
Close off area. Keep unnecessary personnel away.<br />
Special Procedures<br />
Clean up and dispose of waste in accordance with all Federal, State and local regulations. Regulations vary.<br />
Consult local authorities before disposal.<br />
Page 2 of 6 Issue Date: 4/20/06 Version 1
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 7. HANDLING AND STORAGE<br />
Handling Procedures<br />
Prevent all contact with skin and eyes. Do not breathe vapors or mists. Use only non-sparking tools. Keep away<br />
from water.<br />
Storage Procedures<br />
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away<br />
from heat, sparks, open flame and other ignition sources. Avoid prolonged exposures to light.<br />
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION<br />
Exposure Guidelines<br />
A: General Product Information<br />
No exposure limits are available for this product, however, limit exposure to a minimum.<br />
B: Component Exposure Limits<br />
ACGIH, OSHA, and NIOSH have not developed exposure limits for any of this product’s components.<br />
Engineering Controls<br />
Use local exhaust ventilation to keep exposures to a minimum.<br />
Personal Protective Equipment<br />
Personal Protective Equipment: Eyes/Face<br />
Wear safety glasses with side shields. Use chemical goggles and a face shield if gross contamination potential exists.<br />
Personal Protective Equipment: Skin<br />
Use impervious gloves when handling. Use of protective coveralls and long sleeves is recommended to prevent<br />
skin contact.<br />
Personal Protective Equipment: Respiratory<br />
If ventilation is not sufficient to effectively prevent buildup of dust or fume, appropriate NIOSH respirator<br />
protection must be provided. Respirators should be selected by and used under the direction of a trained health<br />
and safety professional following requirements found in OSHA’s respirator standard (29 CFR 1910.134) and<br />
ANSI’s standard for respiratory protection (Z88.2-1992).<br />
Personal Protective Equipment: General<br />
Eye wash fountain and emergency showers are recommended. Use good hygiene practices when handling this<br />
material including changing and laundering work clothing after use.<br />
SECTION 9 . PHYSICAL & CHEMICAL PROPERTIES<br />
Appearance: Clear <strong>Liquid</strong> Odor: Not Available<br />
Physical State: <strong>Liquid</strong> pH: Not Available<br />
Vapor Pressure: Not Available Vapor Density: Not Available<br />
Boiling Point: 529°F (276°C)<br />
(Tetraethylene Glycol Dimethyl Ether)<br />
Melting Point: Not Available<br />
Solubility (H 2<br />
O): Not Available Density: 1.035g/cm<br />
Auto Ignition: Not Available Flash Point: 210°F (99°C)<br />
Lower Flammability Limit (LFL): Not Available<br />
Upper Flammability Limit (UFL): Not Available<br />
OSHA Flammability Classification: IIIB Combustible <strong>Liquid</strong><br />
Physical Properties: Additional Information<br />
No information available.<br />
Page 3 of 6 Issue Date: 4/20/06 Version 1
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 10. CHEMICAL STABILITY & REACTIVITY INFORMATION<br />
Chemical Stability<br />
Product is stable under recommended storage conditions.<br />
Chemical Stability: Conditions to Avoid<br />
Keep away from water, heat, and incompatible materials.<br />
Incompatibility<br />
Reacts violently with water. Reacts with metals to release flammable gas which may explode. Can react with<br />
oxidizing agents and acids.<br />
Hazardous Decomposition<br />
Borane/boron oxides, sodium oxide, hydrogen gas<br />
Hazardous Polymerization<br />
Will not occur.<br />
SECTION 11. TOXICOLOGICAL INFORMATION<br />
Acute Dose Effects<br />
A: General Product Information<br />
Acute exposure can lead to irritation and burns to the eyes, skin, gastrointestinal tract and respiratory tract.<br />
Acute inhalation or ingestion can lead to central nervous system depression characterized by headache,<br />
drowsiness, slurred speech, weakness and blurred vision. Product may cause allergic skin sensitization<br />
reactions. Acute or prolonged exposure can lead to kidney and liver damage and blood disorders.<br />
B: Component Analysis - LD50/LC50<br />
Tetraethylene glycol Dimethyl Ether (143-24-8)<br />
Oral LD50 Rat: 5140 mg/kg<br />
Carcinogenicity<br />
A: General Product Information<br />
None identified.<br />
B: Component Carcinogenicity<br />
None of this product’s components are listed by ACGIH, IARC, OSHA, NIOSH, or NTP<br />
SECTION 12. ECOLOGICAL INFORMATION<br />
Ecotoxicity<br />
A: General Product Information<br />
No data for this product is available.<br />
B: Component Analysis - Ecotoxicity - Aquatic Toxicity<br />
No ecotoxicity data are available for this product’s components.<br />
Environmental Fate<br />
No data for this product is available.<br />
SECTION 13. DISPOSAL CONSIDERATIONS<br />
US EPA Waste Number & Descriptions<br />
A: General Product Information<br />
This product, if discarded directly, meets the EPA characteristic of ignitability (waste number D001). You must<br />
test your waste using methods described in 40 CFR Part 261 to determine if it meets applicable definitions of<br />
hazardous wastes.<br />
B: Component Waste Numbers<br />
No EPA Waste Numbers are applicable for this product’s components.<br />
Disposal Instructions<br />
Waste must be handled in accordance with all federal, state, provincial, and local regulations. Purchaser is<br />
advised to review regulations referenced for applicability as determined by purchaser’s use of the product.<br />
Page 4 of 6 Issue Date: 4/20/06 Version 1
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 14. TRANSPORTATION INFORMATION<br />
US DOT Information<br />
Shipping Name: Corrosive liquids, water-reactive n.o.s. (<strong>Sodium</strong> borohydride)<br />
UN/NA #: UN3094 Hazard Class: 8, (4.3) Packing Group: II<br />
Required Label(s): Corrosive; Dangerous When Wet<br />
TDG Information<br />
Shipping Name: Corrosive liquid, water-reactive n.o.s. (<strong>Sodium</strong> borohydride)<br />
UN/NA #: UN3094 Hazard Class: 8, (4.3) Packing Group: II<br />
Required Label(s): Corrosive; Dangerous When Wet<br />
SECTION 15. REGULATORY INFORMATION<br />
US Federal Regulations<br />
A: General Product Information<br />
All components are on the U.S. EPA TSCA Inventory List.<br />
B: Component Analysis<br />
None of this products components are listed under SARA Section 302 (40 CFR 355 Appendix A),<br />
SARA Section 313 (40 CFR 372.65), or CERCLA (40 CFR 302.4).<br />
State Regulations<br />
A: General Product Information<br />
Other state regulations may apply. Check individual state requirements.<br />
B: Component Analysis - State<br />
The following components appear on one or more of the following state hazardous substances lists:<br />
Component CAS CA MA MN NJ PA RI<br />
<strong>Sodium</strong> borohydride 16940-66-2 No No No Yes No No<br />
Component Analysis - WHMIS IDL<br />
No components are listed in the WHMIS IDL.<br />
Additional Regulatory Information<br />
A: General Product Information<br />
No additional information.<br />
B: Component Analysis - Inventory<br />
Component CAS # TSCA DSL EINECS<br />
Tetraethylene glycol Dimethyl Ether 143-24-8 Yes Yes Yes<br />
<strong>Sodium</strong> borohydride 16940-66-2 Yes Yes Yes<br />
Page 5of 6 Issue Date: 4/20/06 Version 1
Product Name: Pronto! Background Reduction Kit ID: C-375<br />
SECTION 16. OTHER INFORMATION<br />
Other Information<br />
Reasonable care has been taken in the preparation of this information, but <strong>Corning</strong> makes no warranty of<br />
merchantability or any other warranty, expressed or implied, with respect to this information. <strong>Corning</strong> makes<br />
no representations and assumes no liability for any direct, incidental or consequential damages resulting from<br />
its use.<br />
Revision information<br />
New <strong>MSDS</strong> Version 1.000 Revision 1, 4/20/2006<br />
Key/Legend<br />
ACGIH = American Conference of Governmental Industrial Hygienists. CERCLA = Comprehensive<br />
Environmental Response, Compensation and Liability Act. CFR = Code of Federal Regulations.<br />
DSL = Canadian Domestic Substance List. EINECS = European Inventory of New and Existing Chemical<br />
Substances. EPA = Environmental Protection Agency. HEPA = High Efficiency Particulate Air.<br />
HMIS = Hazardous Material Identification System. IARC = International Agency for Research on Cancer.<br />
NFPA = National Fire Protection Association. NIOSH = National Institute of Occupational Safety and Health.<br />
NJTSR = New Jersey Trade Secret Registry. NTP = National Toxicology Program. OSHA = Occupational<br />
Safety and Health Administration. NA = Not available or Not Applicable. SARA = Superfund Amendments<br />
and Reauthorization Act. TLV = Threshold Limit Value. TSCA = Toxic Substance Control Act.<br />
WHMIS = Workplace Hazardous Materials Information System.<br />
Contact<br />
Corporate Safety Management Services, phone (607) 974-6926<br />
This is the end of <strong>MSDS</strong> # C-375<br />
Page 6 of 6 Issue Date: 4/20/06 Version 1