Spec Sheet - Lumax Lighting

Job______________________________________________
Type_____________________________________________
Catalog #
Application Finish
• Ideal for drive-in cold storage application.
• High mounting heights.
• Installing amalgam lamps helps maintain lumen
output over wide temperature range.
• Energy saving lamps not compatible with low
temperature applications.
• All exposed metal parts pretreated with a
phosphate bonding process and post-painted with
an electrostatically applied high temperature
baked white enamel for superior quality and
durability.
CHI
SERIES
Construction
• Rugged, glass-fiber reinforced polyester
housing carries 5VA Flammability Rating.
• Closed cell polyurethane, poured gasket
contains “Dry Skin” on curing that does not
stick to the mating surface. High gasket
compression recovery provides a solid seal
throughout the life of the fixture.
• Standard, 100% virgin, impact resistant
acrylic lens provides 91% light transmission
for long lasting clarity and resistance
to weathering. Optional UV stabilized poly
carbonate lens available for maximum impact
resistance and wider temperature range.
• Frosted ends and lineal side prisms
reduce brightness and obscure lamps.
• Twelve stainless steel latches standard.
ORDERING GUIDE
Electrical
• Full metal gear tray simplifies assembly, carries all
electrical components, and provides a means of positive
grounding.
• Standard ballast is electronic, HPF, class P,
and UL listed for universal voltage.
Listed
listed.
• Suitable for damp locations.
• ETL tested for IP65, IP66, and IP67.
• NEMA 4X
• 1500 PSI water spray rated.
• I.B.E.W. Labeled.
• Normal fluorescent ballast/lamp minimum starting
temp -20 degrees F. Led driver/ lamp minimum
starting temp -4 degrees.
Example: CHI43248-CO9SA-EAR-SSL
Industrial / Hose-Down
Fluorescent High Bay
Normal Fluorescent
Ballast/Lamp Minimum
Starting Temp -20 o F
Series Lmps Watts Fixt Options
CHI 2-6,8 32-32wT8
54-54wT5HO
48 Ballast:
1 or 2 lamps:
EO - One ballast
3+ lamps:
EO - Two ballasts, wired inboard/ outboard
(or customer specified)
CO - One ballast
Specific Ballasts:
HL – High Ballast Factor
LW – Low Ballast Factor
PSP – Program Start, Parallel Wiring
PRS - Programmed rapid start ballast(std
on T5)
Voltage:
1 - 120 7- 480
4 - 277 8 - 347-480
5 - 347 9- 120-277
Reflector:
EAR – Enhanced Aluminum Reflector (95%)
Lens:
SA - Acrylic lens
PC - Polycarbonate lens
2G-20 Gauge CRS hsg.
ALUM-Aluminum
Lamps:
L835 – Lamp, Generic, 80-85 CRI, 3500K
L841 – Lamp, Generic, 80-85 CRI, 4100K
Cords:
C6 – 6’ only
CP6 – 6’ and 3-prong plug
CP6TL – 6’ and twist lock plug
Emergency Ballasts:
EM1C – Cold weather emergency ballast (-18 C), wire
to 1-lamp
EM2C – Cold weather emergency ballast (-18 C), wire
to 2-lamps (T8 only)
Motion Sensor:
MS9 – HB, LB, Aisle applications, 120/277/347v, PIR,
Low Temp
MS8 – HB application, 480v. PIR, Low Temp, Photocell
MS5 – HB application, 120/277v, PIR, Low Temp
Custom finishes: (only on suspended and surface
mounted fixtures)
Any RAL paint color or selected painted pattern finish
available as finish option.
CD - Conduit Suspension Mount
CUL - Canada UL Listed
PH - Piano Hinge
C/R - Continuous Row
BA - Back Access (Not available for surface mount).
LUMAX INDUSTRIES, INC. Chestnut Avenue & Fourth Street
Altoona, PA 16603-0991 814-944-2537 Fax 814-944-6413
www.lumaxlighting.com

PHOTOMETRIC DATA
Catalog Number: CHI43248-CO9SA-EAR
Lamps: 4 lamps, rated Lumens/Lamp: 11800
Total Luminaire Efficiency: 82%
CHI
Series
DIMENSIONS
Specifications and dimensional data subject to change
without notice.
52.0
14.6
52.4
52.0
6.0
6.0
14.6
15.0
6.0
14.6
15.0
UNLESS OTHERWISE
SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES AS NOTED
FRACTIONAL 1/16"
ANGULAR 1
TWO PLACE DECIMAL .060
THREE PLACE DECIMAL .030
INTERPRET GEOMETRIC
TOLERANCING PER:
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
....
NAME
-
-
-
-
-
DATE
xx/xx/xx
xx/xx/xx
xx/xx/xx
xx/xx/xx
xx/xx/xx
The information contained in this document is
the confidential property of Koller Enterprises Inc.
This information is to be used by the recipient
only for the purpose of which it has been provided
by Koller. This document and any information
contained therein may not be reproduced or made
available to any third party without the written
authorization of Koller. No tooling to produce the
product which is the subject of this document can
be made without written authorization from Koller.
Recipient's acceptance of this document is an
acknowledgement of agreement to these terms.
1400 South Old Highway 141 PH (636) 600-4084 FX (636) 600-4108
Fenton, MO. 63026
www.SLPlighting.com
Part Weight
Material
LUMAX CT4i INDUSTRIES, INC.
CHI.0813 Line Drawing
Finish
SIZE
REV.
A
Scale 1:16 SHEET 1 OF 1 A
Drawn By :
CSO DATE : 6/28/2012 DWG. No. CT4i Line Drawing