Falcon Price Book - Top Notch Distributors, Inc.

Schedule of Finishes Ordering Format
FINISHES
Although we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes have
limitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency
of use or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. Our
Company cannot accept responsibility for finish deterioration in these circumstances and therefore the finishes cannot be guaranteed.
These products will not be refinished or replaced under our warranty should deterioration of finishes occur.
Some finishes are not suggested for areas that are subject to corrosive climate or chemical conditions. We recommend chrome plated
or stainless steel finishes for these areas.
ANSI/BHMA
Finish
U.S. Standard
Code Code Description
605* 3 Bright Brass - Clear Coated
606 4 Satin Brass - Clear Coated
613** 10B Satin Bronze; Dark Oxidized and Oil Rubbed
625 26 Bright Chromium
626 26D Satin Chromium
630 32D Satin Stainless Steel
* 605 Finish is not recommended for corrosive climates.
** Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different
alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil
rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.
Please refer to price columns for each lock series for finish availability.
HOW TO SPECIFY FINISHES
STRAIGHT FINISHES: When the finish is to be the same for both sides of the door.
EXAMPLE: 40 EA. 511HG 626
SPLIT FINISHES: Finish may vary from one side of the door to the other.
EXAMPLE: 40 EA. X301TG 606 x 625 (Outside finish is always specified first)
Price Book 110
Effective March 4, 2013 • Rev. 3/13
Locks-2