Baldwin Estate Price Book - Top Notch Distributors, Inc.

PRICE BOOK MAY 2013

ESTATE FINISHESTIER 1 TIER 2031**Non-lacqueredBrass030PolishedBrass003Lifetime (PVD)Polished Brass033VintageBrass034Lacquered VintageBrassDISTRESSED FINISHES:040SatinBrass112*VenetianBronze412*DistressedVenetian BronzeNot all hardware is available Distressed.The rugged tumbling process would damage some components.In cases where distressing is not possible,the equivalent non-distressed finish will be provided.412 = 112402 = 102452 = 152 Antique Nickel with Matte laqcuer (151 has gloss laqcuer)Hardware NOT available distressed includes:> All mortise locks, cylinders, latches, strikes060*Satin Brass& Brown102**Oil RubbedBronze402**DistressedOil Rubbed Bronze> Certain levers & handleset trim(noted on those pages)* HAND-RELIEVED FINISH VARIANCES:(050, 060, 112, 151, 412, 452)Product finishes which are HAND RELIEVED may vary in luster, hue andappearance as a result of handcrafted variances in the final finishing step.050*Satin Brass& Black151*AntiqueNickel452*DistressedAntique Nickel** LIVING FINISH(031, 033, 102, 320, 324, 402)BALDWIN EXCLUSIVE *Product finishes which are LIVING will vary over time. They are not eligiblefor finish warranty.190SatinBlack260PolishedChrome150SatinNickel264SatinChrome056Lifetime (PVD)Satin NickelBALDWIN EXCLUSIVE *055Lifetime (PVD)Polished NickelTIER 1 FINISHES:STAINLESS STEEL HARDWARE ONLY320**PolishedStainless Steel324**SatinStainless SteelBaldwin # US # BHMA #030 = 3 605031 = 3NL –040 = 4 606050 = 5 609060 = 6 608102 = 10B 613150 = 15 619190 = 19 622260 = 26 625264 = 26D 626324 = 32D 630TIER 1 TIER 2

Estate offers homeowners the ultimate in design inspiration. Bring your vision to life bychoosing a knob or lever, and complement it with any Estate rosette. All products are offeredin a wide variety of quality Baldwin finishes so you can unlock all of the design possibilities.WITH OVER 117,000 DIFFERENT COMBINATIONS,THE POSSIBILITIES ARE NEARLY ENDLESS!Visit the Lock Designer to create a one of a kindlock that truly fits your design vision.LOG ON TO WWW.BALDWINHARDWARE.COM AND USE THELOCK DESIGNER PAGE TO SET UP YOUR TRULY CUSTOMKNOB, LEVER & ROSE COMBINATIONS.BALDWINHARDWARE.COM

BALDWINORDERING & SHIPPING LEAD-TIMESBALDWIN ESTATE, GENERAL HARDWARE & CABINET HARDWARE.Unless otherwise communicated, all products in these categories will ship fromthe Baldwin distribution center within 3 to 4 weeks from date of order entry.BALDWIN MULTI-POINT TRIMSUnless otherwise communicated, all products in this category will ship from theBaldwin distribution center within 4 to 5 weeks from date of order entry.BALDWIN KEYLESS ENTRYAll products in this category will ship from the Baldwin distribution center within3 to 4 weeks from date of order entry.FREIGHT AND EXPEDITED FREIGHT:Orders over $1000 receive freight prepaid by Baldwin. Baldwin will utilizestandard ground transportation unless otherwise indicated. In addition to groundfreight Baldwin offers 3 types of expedited freight at the customer’s cost. Next Day,Two Day & 3 Day. To request expedited freight just indicate which of the 3 optionsyou prefer. On orders under $1000 and orders that request expedited freight, thecost of shipping will appear on your invoice.HOW DO I REQUEST SAME DAY SHIPMENTS?To receive same day shipment on any of your orders please verify that the itemsare in stock. This can be done by checking Baldwin Express or calling BaldwinCustomer Service. If the item is available, contact Baldwin Customer Service tomake us aware that your order is being sent and that it needs to be shipped thatday. Orders must be received by Baldwin prior to 10:30 a.m. EST and should besent to the attention of the Customer Service Representative that you notified.Please note “ship today” on the order and if you want to use expedited freight.i.e. – Next day, Two day, etc.MINIMUM ORDER SIZE:Due to cost of order processing and fulfillment the minimum dollar amount foran order placed directly with Baldwin Customer Service is $250. For orders lessthan $250 net customers may either place the order through Baldwin Express,increase the size of the order to at least $250, or purchase the items throughBaldwin’s wholesale distribution partners.1

HOW TO ORDER& INSTALLATIONKNOBS, LEVERS,ROSETTESINTERIORHARDWAREENTRACE TRIMMORTISE LOCKSCYLINDERS & KEYSMULIT-POINTKEYLESS ENTRY& DEADBOLTSGENERALHARDWARETABLE OF CONTENTSHow To Order & InstallationEssentials 4Part Numbers & Process 5How to Order & Installation Examples 6Knobs, Levers, RosettesKnobs 12Levers 20Rosettes 30Pre-Configured Knobs 41Pre-Configured Levers 42Tubular Keyed Knobs 44Tubular Keyed Levers 45Interior HardwareLatches 46Interior Knob & Lever UL Kits 47Strikes 48Spindles 49Mortise Bolts 50Turn Piece 52Turn Knobs 53ER Trim 54Door Accessories 55Spare Parts & Installation Tools 56Communicating Door Kits 64Entrance TrimSymbols & Terminology 65Tubular Entrance Sets 68Mortise Trim 82Thin & Thick Door Kits 118Mortise LocksSpecifications 120How to Order 121Entrance Functions 122Grade 1 - Light Commercial 124Interior Functions 126Deadlocks 128Electrified 129Strikes 130Armored Fronts 131Cylinders & KeysLock Trim Thickness Index 132Cylinders - C Keyway Table 133Accessories 134Cylinder Trim 135Specifications 136Rim Cylinders 137Key Blanks 138Replacement Parts 139MiscellaneousCremone Bolts 140Tools & Keying Kits 142Sliding Door Locks 143Garden Door Trim 144Multi-PointHow to Order 146Styles 148Configurations 150European MortiseHow to Order 162Styles 163Configurations 164Rim LocksStandards & Specifications 168Passage, Privacy, and Entrance 169Special Functions 170Trim & Accessories 171Keyless EntryIntroduction & Specifications 173How to Order 175DeadboltsFeatures 176UL Kits 176How to Order 176Tubular Handleset Accessories 181Deadbolt Accessories 183General HardwareLetter Box Plates 184Door Knockers 185Bell Buttons 186Door Guards & Surface Bolts 188Flush Rings & Edge Pulls 190Casement Fasteners 192Costume Hooks 193Kick Plates & Push Plates 195Pulls 197Door Stops 202Mortise Hinges 204Switchplates 209Cabinet Hardware 212IndexNumerical 222Alphabetical 228INDEX

ALPHABETICAL INDEX PAGE85365 Ashton ® 806570 Atlanta 996552 Baltimore 926554 Barclay 11185327 Bethpage ® Sectional 7185337 Bethpage ® 76M522 Bethpage ® (Mortise) 1176942 Bismark 10585360 Blakely 756555 Boston 8885354 Boulder ¾ 78M512 Boulder ¾ (Mortise) 1166402 Boulder 78M514 Boulder (Mortise) 1166420 Bristol (Tubular) 726963 Bristol 1106939 Bristol Lever 1106520 Bristol Sectional 8385380 Buckingham ® 7585305 Canterbury 69NUMERICAL INDEX PAGE6401 Devonshire 776402 Boulder 786403 Cody 796420 Bristol (Tubular) 726426 Kensington (Tubular) 776502 1126503 956505 916506 1136508 986513 996514 1146515 Edinburgh Sectional 826516 Edinburgh (Oval) 826520 Bristol Sectional 836520 836526 Kensington ¾ 846540 San Diego 856541 San Francisco 866542 Tremont 876543 Lancaster 886544 Hamilton 896546 Wilmington 946547 Nashville 906548 Detroit 956549 Williamsburg 916550 Georgetown 916551 Reading 986552 Baltimore 926552 926553 1126554 Barclay 1116555 Boston 886557 Richmond 936563 Chicago 9685352 Cody ¾ 79M502 Cody ¾ (Mortise) 1166403 Cody 79M504 Cody (Mortise) 1166571 Concord 1006931 Dallas 1036940 Denver 1036548 Detroit 956401 Devonshire 776952 Edinburgh 1096515 Edinburgh Sectional 826516 Edinburgh (Oval) 826962 Fenwick ® 1096550 Georgetown 9185375 Glennon 746544 Hamilton 896973 Houston 1136950 Kensington 1086526 Kensington ¾ 846560 Lexington 946562 New York 956563 Chicago 966565 Monterey 976567 Trenton 986570 Atlanta 996571 Concord 1006573 Springfield 1016602 986603 856604 1006605 876606 936608 956614 966619 996621 946622 896624 1086627 1106628 916634 976635 886638 826639 826640 836641 1066642 976643 846690 1156709 1156714 1066763 856767 926426 Kensington (Tubular) 776966 Lakeshore 1126974 Lakeshore Lever 1126922 Lakewood ® 1026543 Lancaster 8885345 Landon ® 816560 Lexington 9485315 Logan 7085335 Logan 7085320 Madison 6985350 Manchester 736976 Minneapolis 1146938 Mobile 1046565 Monterey 9785370 Nantucket 736547 Nashville 906562 New York 956944 Pasadena 1066551 Reading 986999 Richland ® 1156774 936789 1096790 1086791 896793 906794 1006795 946796 876797 886798 1016922 Lakewood 1026931 Dallas 1036933 Versailles 1076938 Mobile 1046939 Bristol Lever 1106940 Denver 1036942 Bismark 1056944 Pasadena 1066948 Victoria 1076950 Kensington 1086951 Stanford 896952 Edinburgh 1096953 1036956 1076961 Westminster 1086962 Fenwick 1096963 Bristol 1106966 Lakeshore 1126973 Houston 1136974 Lakeshore Lever 1126975 866976 Minneapolis 1146980 1026986 105INDEXENTRANCE TRIM6557 Richmond ® 936540 San Diego ® 856541 San Francisco 8685386 Soho ® 7285387 Soho ® ¾ 8085385 Soho ® Two-Point 81M516 Soho ® (Mortise) 1176573 Springfield 1016951 Stanford 8985355 Stonegate 7485325 Tahoe 7185340 Tahoe 766542 Tremont 876567 Trenton 986933 Versailles 1076948 Victoria 1076961 Westminster 1086549 Williamsburg 916546 Wilmington 946988 1036991 1106993 1076996 1046999 Richland 11585305 Canterbury 6985315 Logan 7085320 Madison 6985325 Tahoe 7185327 Bethpage 7185335 Logan 7085337 Bethpage 7685340 Tahoe 7685345 Landon 8185350 Manchester 7385352 Cody ¾ 7985354 Boulder ¾ 7885355 Stonegate 7485360 Blakely 7585365 Ashton 8085370 Nantucket 7385375 Glennon 7485380 Buckingham 7585385 Soho Two-Point 8185386 Soho 7285387 Soho ¾ 80M502 Cody ¾ 116M504 Cody 116M512 Boulder ¾ 116M514 Boulder 116M516 Soho 117M522 Bethpage 117HOW TO ORDER& INSTALLATIONKNOBS, LEVERS,ROSETTESINTERIORHARDWAREENTRACE TRIM MORTISE LOCKS CYLINDERS & KEYS MULIT-POINTKEYLESS ENTRY& DEADBOLTSGENERALHARDWARE3INDEX

HOW TO ORDER & INSTALLATIONESSENTIALSLock Types: 1) Mortise 2) TubularDOOR THICKNESS & STILEDoor Types:> Wood, Fiberglass & Hollow Metal> Hollow Fiberglass & Metal doors do NOT allow for any mortise lock installationAStileBThicknessDoor Prep:> 1) Pre-drilled for Mortise2) Pre-drilled for 2.125˝ bore hole Tubular3) Un-prepped (blank door) – ideal for tubular latch or mortise installations(Estate Passage – 0.625˝ hole for spindle; Estate Privacy – prep varies, see Installation Instructions)> Adaptors can retrofit most Estate Tubular hardware to 2.125˝ bored doors, but only large rosettescover bore hole> Tubular locks CANNOT be used on Mortise-prepped doors> Mortise locks can rarely be used on 2.125˝ bore Tubular-prepped doorsDOOR BACKSETBackset2-3/8" or2-3/4"Door Thickness:> Industry Standards – 1.75˝ (Exteriors) & 1.375˝ (Interiors)> Doors 2 ½˝ Thick limits hardware options – Contact Customer Service> Exterior Doors < 1 ¾˝ Thick limits hardware options> Escutcheon thickness determines cylinder & spindle lengths needed (see Inside Back Cover)1"EdgeBoreDOOR HANDING1/8"Deep2-1/8"DiameterDoor Stile Width:> Narrow Stiles (4˝ or less) limit backset & escutcheon trim options> 3˝ or less Stile severely limits Mortise Lock, Function & Escutcheon optionsDoor Backset:Measurement from edge of door (where it latches) to centerline of lock or doorknobDoor Handing:> Certain Lock Types require correct handing (Exterior Levers, Mortise Boxes, Half Dummy Levers)> HAND OF DOOR ALWAYS DETERMINED FROM OUTSIDELeft Hand (L)OutsideRight Hand (R)A few rules to follow:> The outside of an exterior door is the street or entrance side> The outside of a room door is the hall side> The outside of a single communicating door is the side from which the hinges are not visible whenthe door is closed> The outside of a closet door is the room or hall sideLeft HandReverse Bevel(LR)OutsideRight HandReverse Bevel(RR)Right Handed: hinges on RIGHT – door swings INLeft Handed:hinges on LEFT – door swings INRight Hand Reverse Bevel: hinges on RIGHT – door swings OUTLeft Hand Reverse Bevel: hinges on LEFT – door swings OUT

HOW TO ORDER & INSTALLATIONPASSAGEPassage w/ Rose Installation – Standard LatchHOW TO ORDERWHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pairMinus Rose (.MR)5000.150.MRPassage Rose – pair(no suffix)5048.150Knob Latch(or Lever Latch)5510.150(5513.150)47INSTALLATIONA. Thread supplied roses onto 5097.009 Back Plates.B. Insert 5095.000 Graphite Spacerover spindle and into rose.C. Slide knob or lever trim completely onto the spindlefrom both sides of the door. (NOTE: A minimalamount of “play˝ is required between the knob/leverand the rose to prevent the trim from binding.)D. Secure steel set screws with.25˝ Socket Wrench.IMPORTANT: Set screw is coated with a special epoxy(resin) to prohibit the screw from loosening over time.Passage Pre-drilled DoorWHAT YOU NEED: PART # EXAMPLE PAGE #For 2.125˝ Pre-drilled6502.009 55Doors add: Adaptor*See Spindles section for length neededNOTE: For 1.75˝ or thicker Doors, 3.5˝ spindleincluded with Latch will not be long enough.tA. Install latch and strike per template instructions.B. Position 6502.009 Adaptor (with threadedstuds attached) on outside of door and6502.009 Adaptor on inside face of door.C. Loosely install screws through the insideplate and thread screws into studs.D. Insert alignment bushings into Adaptor andthen insert spindle through the alignmentbushings and fully tighten screws. Removealignment bushings and discard.E. Thread roses onto 6502.009 Adaptor Set.F. Install trim.Passage (Standard Latch & Escutcheon)WHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pairMinus Rose (.MR)5000.150.MREscutcheon Plate –Cut for Knob/Lever (.KN)6797.150.KNKnob Latch 5510.150 47Lever Latch 5513.150 47Spindle* – 4˝ 0511.004 50*See Spindles section for length neededPassage (Mortise Lock)WHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pairMinus Rose (.MR)5000.150.MRPassage Rose – pair (no suffix) 5017.150Mortise Lock, Small Case– passage, 2.5˝ Backset8530.150 120Spindle* – 3.5˝ standardfor install w/ roses0510.004 50*See Spindles section for length needed on thicker doorsPassage (Mortise Lock & Escutcheon)WHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pairMinus Rose (.MR)5000.150.MR(2) Escutcheon Plates – Cutfor Knob/Lever (.KN)6797.150.KNMortise Lock, Small Case– passage, 2.5˝ Backset8530.150 120Spindle* – 4˝ 0511.004 50*See Spindles section for length needed7

HOW TO ORDER & INSTALLATIONPRIVACYPassage Knob w/Mortise Bolt & Escutcheon PlateHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MREscutcheon plate –Outside: Cut for Emergency (KE)6797.150.KEInside: Cut for Turn Knob (KT)6797.150.KTKnob Latch5510.150(or Lever Latch)(5513.150 )47Spindle* – 4˝ 0511.004 50Mortise Bolt 0418.150.LTP (Less Turn Piece) 51Combination Strike (Handed) 5528.150.L 48Privacy with Pin in EscutcheonNOT AVAILABLE FOR ALL ESCUTCHEONSHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MREscutcheons (ordered as pair)KP cut for Privacy6797.150.KPKnob Latch5510.150.P(or Lever Latch)(5513.150.P)47Pin Extender (knob sets only) –5199.000 46Doors thicker than 1.625Swivel – 4˝ 0522.004 50ASSUMED FOR EXAMPLES:Backset – 2.375˝Door thickness – 1.375˝NOTE: for PRE-DRILLED DOORS, Rose/Escutcheon must be at least 2.625˝ diameter/wide to cover bore hole*See Spindles Chart for length needed

HOW TO ORDER & INSTALLATIONPRIVACYPrivacy Pre-drilled DoorPrivacy with Pin in Rose NOT AVAILABLE FOR ALL ROSESAlignment BushingsHOW TO ORDERWHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose 5000.150.MR(.MR)Privacy Rose** – pair (no suffix) 5149.150Knob Latch 5510.150.P + 47 + 556502.009Adaptor*Lever Latch 5513.150.P +6502.009Adaptor*Pin Extender – 5199.000 46Knob Sets: Needed for doors thicker than 1.625˝ (see Pinformula)Lever Sets: Needed for doors thicker than 1.75˝ (see Pinformula)**Adaptors are required on doors with 2 1/8”face-bore. Adaptors are not needed for passage.NOTE: For 1.75˝ or thicker Doors, 3.5˝ spindleincluded with Latch will not be long enough,see Spindles Chart for length neededNOTE: Not all Roses available with PrivacyFunction – see Roses SectionINSTALLATIONA. Install latch and strike per template instructions.B. Position 6502.009 Adaptor (with threadedstuds attached) on outside of door and6502.009 Adaptor on inside face of door.C. Loosely install screws through the insideplate and thread screws into studs.D. Insert spindle (raised tab should be facing onthe outside of door) and then insert alignmentbushings into Adaptor. Fully tighten screws.Remove alignment bushings and discard.E. To attach roses to Adaptors, place rose over6502.009 Adaptor and secure by threading5197.000 brass Rose Retainer ontothe Adaptor. Tighten with 5198.000steel spanner tool provided.F. Thread 5510.XXX.0030 or 5513.XXX.0030Privacy Button into latch. (See page F/19 forfurther details regarding the privacy button.)G. Install trim.Passage Knob w/Mortise Boltw/ 2.25˝ or smaller roses onlyNo. 5197-000Rose RetainerNo. 6502Outside AdaptorNo. 55XX.XXX.PPrivacy LatchNo. 6502Inside AdaptorAlignment BushingsNo. 5510-XXX-0030HOW TO ORDERWHAT YOU NEED: PART # EXAMPLE PAGE #Knob or Lever – pair5000.150.MRMinus Rose (.MR)Passage Rose* – pair (no suffix) 5002.150Knob Latch:For Pre-drilled Doors5510.150 +6502.009 Adaptor47 + 55Lever Latch:For Pre-drilled Doors5513.150 +6502.009 AdaptorNOTE: For 1.75˝ or thicker Doors, 3.5˝ spindleincluded with Latch will not be long enough,see Spindles Chart for length neededMortise Bolt0418.150.LTP 51(Less Turn Piece)Turn Piece 6750.150 52Emergency Release Trim 0416.150 54INSTALLATIONMortise Bolt Installation• When installing Mortise bolts, ALWAYScheck width of Emergency Release Trimbefore drilling face bore. Standard bore is.625˝ (16mm) completely through door.Emergency Release Trim 0406 and 0407 requirea .5˝ (13mm) bore on outside face of door; a.625˝ (16mm) bore on inside face of door.IMPORTANT: When Emergency Release Trim isused, the turn piece spindle must be cut to extendno farther than halfway through the bolt.Tubular Latch/Mortise Bolt Installation• When installing Mortise bolts with tubularlatches, ALWAYS ensure that face plates ofboth mechanisms have a minimum of .5˝(13mm) clearance between face plates [2.75˝(70mm) minimum distance between centerof bolts] for proper strike installation. Ifmortise bolt and latch/face plates are installedagainst each other (as illustrated), use 5528Strike illustrated above, and on page 48.CAUTION: WHEN ROSES OF 2.625˝ DIAMETERARE USED WITH THIS STRIKE, TURN PIECESNOS. 6728, 6732, 6734, and 6751 CANNOT BEUSED DUE TO CLEARANCE RESTRICTIONS.NOTE: 5528 strike is designed with a curved lip. Pleasespecify hand of door when ordering. Hand of strike basedon latch bolt being installed below the mortise bolt.Tubular latches and mortise bolts may be usedin conjunction with escutcheons. Use of 5528Strike is required to replace normally furnishedstrikes due to clearance restrictions.*See Spindles Chart for length needed9

HOW TO ORDER & INSTALLATIONPRIVACY2˝ Privacy Rose Installation5097 BackplateROSEA B CROSE RETAINERINSTALLATIONA. After completing the latch and backplate installation,a hole for the privacy button needs to be drilled.The first step is to remove the alignmentBushings and spindle used for thebackplate installation process.B. Attach the roses to the backplates using the roseretainers and tighten with the supplied spanner tool.DESPANNERTOOLHOLELOCATIONMARKEDHOLELOCATIONPRIVACYBUTTONUse a pencil to mark the privacy holelocation on each side of the door.C. To avoid damage, remove both roses andthe latch before drilling the privacy holes.D. Drill a 1/4” diameter hole throughboth sides of the door.Caution: To assure proper hole location drill fromeach side of the door and not from one side only.E. Re-install the latch and re-attach both roses.1/4”DIAMETERHOLEOn the inside of the room, thread the privacy buttoninto the latch and install the knobs or levers.Mortise Lock w/ Emergency Release TrimHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MRPassage Rose* – pair (no suffix) 5002.150Emergency Release Trim – 0404.150Turn Piece 6756.150Mortise Lock, 2.5˝ Backset (Handled) 6315.150.L 121Spindle* – 4˝ 0511.004 50Mortise Lock w/ Escutcheon PlateHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MREscutcheon Plate, Exterior6797.15.KEEscutcheon Plate, Interior6797.150.KTMortise Lock, 2.5˝ Backset 6315.150 121Spindle* – 4˝ 0511.004 50ASSUMED FOR EXAMPLES:Backset – 2.375˝Door thickness – 1.375˝NOTE: for PRE-DRILLED DOORS, Rose/Escutcheon must be at least 2.625˝ diameter/wide to cover bore hole*See Spindles Chart for length neededFOR ORDERING HANDLESETS, REFER TO THE INNER FLAP OF THE BACK COVER

HOW TO ORDERSPLIT FINISHES/STYLESFor Split Finish & Split Style orders, we recommend calling Customer Service:800.437.74488AM – 5PM ESTFAX: 800.255.9785All Baldwin levers meet ADA standards.KNOB/LEVER PINNING:Definition: Pinning is a permanent attachment of the outside knob or lever to the spindle.Outside levers typically are pinned for added security in public commercial settings.Pinning Charge for Estate passage or privacy sets (pair) $65Included with .MRPN costORDER:1. Knobs or Levers & FinishSPECIFY FOR REFERENCE ONLY:2. Door thickness3. Trim to be used4. Handing of the outside lever, if applicable5. Spindle (included)SPINDLE PERMANENTLY ATTACHED TOOUTSIDE KNOB OR LEVER WITH PINSET SCREW USED TO MOUNTINSIDE KNOB OR LEVERCONCEALEDPIN PLACEMENTFor pinning orders,we recommend calling Customer ServiceINSIDEOUTSIDE11

KNOBSSOLID BRASS & CRYSTAL5000 Knobshown w/ 5002 Rose2.5030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525000.xxx.MR Minus Roses – pair 1.8 $145 $1655000.xxx.IMR Individual Minus Rose – half pair .9 73 835000.xxx.MRPN Minus Roses – pair (PINNED) 1.8 210 2301.725001 Knobshown w/ 5046 RoseItem # Description Wt. 030, 150, 2605001.xxx.MR Minus Roses – pair 2.7 $1455001.xxx.IMR Individual Minus Rose – half pair 1.4 735001.xxx.MRPN Minus Roses – pair (PINNED) 2.7 2103.9˝2.6˝ 2.4˝5005 Knobshown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525005.xxx.MR Minus Roses – pair 1.8 $145 $1655005.xxx.IMR Individual Minus Rose – half pair .9 73 835005.xxx.MRPN Minus Roses – pair (PINNED) 1.8 210 2305009 Knob – SWAROVSKI CRYSTALshown w/ 5048 RoseItem # Description Wt. 030, 150, 2605009.xxx.MR Minus Roses – pair 2.8 $5005009.xxx.IMR Individual Minus Rose – half pair 1.4 2505009.xxx.MRPN Minus Roses – pair (PINNED) 2.8 5653.92.62.45011 Knobshown w/ 5058 Rose2.5˝030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525011.xxx.MR Minus Roses – pair 1.1 $160 $1805011.xxx.IMR Individual Minus Rose – half pair .55 80 905011.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.8˝2.4˝

5013 Knobshown w/ 5016 Rose2.2KNOBSSOLID BRASS030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525013.xxx.MR Minus Roses – pair 2.1 $145 $1655013.xxx.IMR Individual Minus Rose – half pair 1.1 73 835013.xxx.MRPN Minus Roses – pair (PINNED) 2.1 210 2301.752.255015 Knobshown w/ 5017 Rose2.25"2.25"2.125"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525015.xxx.MR Minus Roses – pair 1.8 $100 $1205015.xxx.IMR Individual Minus Rose – half pair .9 50 605015.xxx.MRPN Minus Roses – pair (PINNED) 1.8 165 185For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 41.5020 Knobshown w/ 5017 Rose2.25"2.25"2.125"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525020.xxx.MR Minus Roses – pair 1.8 $100 $1205020.xxx.IMR Individual Minus Rose – half pair .9 50 605020.xxx.MRPN Minus Roses – pair (PINNED) 1.8 165 185For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 41.5023 Knobshown w/ 5059 Rose2.93"2.39"1.75"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525023.xxx.MR Minus Roses – pair 1.8 $100 $1205023.xxx.IMR Individual Minus Rose – half pair .9 50 605023.xxx.MRPN Minus Roses – pair (PINNED) 1.8 165 1855024 Oval Knobshown w/ R030 Arch Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525024.xxx.MR Minus Roses - pair 1.8 $100 $1205024.xxx.IMR Minus Roses - half pair .9 50 6013

KNOBSSOLID BRASS5025 Knobshown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525025.xxx.MR Minus Roses – pair 1.8 $100 $1205025.xxx.IMR Individual Minus Rose – half pair .9 50 605025.xxx.MRPN Minus Roses – pair (PINNED) 1.8 165 185For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 41.5030 Knobshown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525030.xxx.MR Minus Roses – pair 1.8 $145 $1655030.xxx.IMR Individual Minus Rose – half pair .9 73 835030.xxx.MRPN Minus Roses – pair (PINNED) 1.8 210 2305031 Knobshown w/ 5021 Rose2.3030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525031.xxx.MR Minus Roses – pair 2.3 $145 $1655031.xxx.IMR Individual Minus Rose – half pair 1.2 73 835031.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 2302.62.75041 Knobshown w/ 5046 Rose2.25"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525041.xxx.MR Minus Roses – pair 2.4 $100 $1205041.xxx.IMR Individual Minus Rose – half pair 1.2 50 605041.xxx.MRPN Minus Roses – pair (PINNED) 2.4 165 1852.625"2.125"For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 42.5045 Knobshown w/ 5046 Rose.42.2030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525045.xxx.MR Minus Roses – pair 1.1 $160 $1805045.xxx.IMR Individual Minus Rose – half pair .55 80 905045.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.62.1

5050 Knobshown w/ 5053 Rose2KNOBSSOLID BRASS030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525050.xxx.MR Minus Roses – pair 1.9 $145 $1655050.xxx.IMR Individual Minus Rose – half pair 1.0 73 835050.xxx.MRPN Minus Roses – pair (PINNED) 1.9 210 2302.82.45055 Knobshown w/ 5032 Rose2.1030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525055.xxx.MR Minus Roses – pair 1.9 $145 $1655055.xxx.IMR Individual Minus Rose – half pair 1.0 73 835055.xxx.MRPN Minus Roses – pair (PINNED) 1.9 210 2302.12.15057 Knobshown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525057.xxx.MR Minus Roses – pair 1.4 $145 $1655057.xxx.IMR Individual Minus Rose – half pair .7 73 835057.xxx.MRPN Minus Roses – pair (PINNED) 1.4 210 2305060 Knobshown w/ 5062 Rose2.1030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525060.xxx.MR Minus Roses – pair 1.4 $145 $1655060.xxx.IMR Individual Minus Rose – half pair 7 73 835060.xxx.MRPN Minus Roses – pair (PINNED) 1.4 210 2301.72.65063 Knobshown w/ 5042 Rose2.7"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525063.xxx.MR Minus Roses – pair 2.3 $145 $1655063.xxx.IMR Individual Minus Rose – half pair 1.2 73 835063.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 2304.125"2.4"15

KNOBSSOLID BRASS5064 Knobshown w/ 5004 Rose2.3030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525064.xxx.MR Minus Roses – pair 1.9 $145 $1655064.xxx.IMR Individual Minus Rose – half pair 1.0 73 835064.xxx.MRPN Minus Roses – pair (PINNED) 1.9 210 2302.62.25065 Knobshown w/ 5027 Rose2.5030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525065.xxx.MR Minus Roses – pair 2.3 $145 $1655065.xxx.IMR Individual Minus Rose – half pair 1.2 73 835065.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 2302.22.25066 Knobshown w/ 5078 Rose2.7˝ 2.7030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525066.xxx.MR Minus Roses – pair 1.1 $160 $1805066.xxx.IMR Individual Minus Rose – half pair .55 80 905066.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.625˝ 2.82.2˝ 2.25067 Knobshown w/ 5003 Rose2.25"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525067.xxx.MR Minus Roses – pair 1.0 $145 $1655067.xxx.IMR Individual Minus Rose – half pair .5 73 835067.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 2302.0"2.125"5068 Knobshown w/ 5070 Rose2.4030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525068.xxx.MR Minus Roses – pair 1.1 $160 $1805068.xxx.IMR Individual Minus Rose – half pair .55 80 905068.xxx.MRPN Minus Roses – pair (PINNED) 2.3 225 2452.62.4

K005 Knobshown w/ R011 Rose2.5˝KNOBSSOLID BRASS & STAINLESS STEEL030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452K005.xxx.MR Minus Roses – pair 2.5 $290 $310K005.xxx.IMR Individual Minus Rose – half pair 1.5 145 1552˝ 2.5˝K006 Knobshown w/ R012 Rose2.4˝030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452K006.xxx.MR Minus Roses – pair 2.5 $290 $310K006.xxx.IMR Individual Minus Rose – half pair 1.5 145 1552.6˝ 2.5˝5055S Knob – STAINLESS STEELshown w/ 5032S Rose2.1Item # Description Wt. 320, 3245055S.xxx.MR Minus Roses – pair 1.1 $1455055S.xxx.IMR Individual Minus Rose – half pair .55 735055S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 210320 & 324 are not rust proof.2.12.15061S Knob – STAINLESS STEELshown w/ 5032S RoseItem # Description Wt. 320, 3245061S.xxx.MR Minus Roses – pair 1.1 $1455061S.xxx.IMR Individual Minus Rose – half pair .55 735061S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.125˝NOT RECOMMENDED FOR USE WITH PRIVACY ROSES320 & 324 are not rust proof.19*Baldwin Stainless Steel products crafted with Grade 304 Stainless Steel

LEVERSSOLID BRASS5101 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525101.xxx.MR Minus Roses – pair 2.5 $145 $1655101.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.3 73 835101.xxx.MRPN Minus Roses – pair (PINNED) 2.5 210 2305103 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525103.xxx.MR Minus Roses – pair 1.5 $145 $1655103.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .8 73 835103.xxx.MRPN Minus Roses – pair (PINNED) 1.5 210 2305104 Levershown w/ 5004 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525104.xxx.MR Minus Roses – pair 1.5 $145 $1655104.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .8 73 835104.xxx.MRPN Minus Roses – pair (PINNED) 1.5 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 585105 Levershown w/ 5006 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525105.xxx.MR Minus Roses – pair 1.0 $145 $1655105.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .5 73 835105.xxx.MRPN Minus Roses – pair (PINNED) 1.0 210 2305106 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525106.xxx.MR Minus Roses – pair 1.0 $145 $1655106.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .5 73 835106.xxx.MRPN Minus Roses – pair (PINNED) 1.0 210 230All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5107 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525107.xxx.MR Minus Roses – pair 1.2 $145 $1655107.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .6 73 835107.xxx.MRPN Minus Roses – pair (PINNED) 1.2 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 585108 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525108.xxx.MR Minus Roses – pair 1.3 $145 $1655108.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835108.xxx.MRPN Minus Roses – pair (PINNED) 1.3 210 2305109 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565109.xxx.MR Minus Roses – pair 1.3 $145 $1655109.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835109.xxx.MRPN Minus Roses – pair (PINNED) 1.3 210 2305112 Levershown w/ 5028 Rose2030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525112.xxx.MR Minus Roses – pair 1.1 $160 $1805112.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 80 905112.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.64.75113 Levershown w/ 5038 Rose2030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525113.xxx.MR Minus Roses – pair 1.1 $160 $1805113.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 80 905113.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 24534.521All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5114 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525114.xxx.MR Minus Roses – pair 1.3 $145 $1655114.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835114.xxx.MRPN Minus Roses – pair (PINNED) 1.3 210 2305115 Levershown w/ 5006 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525115.xxx.MR Minus Roses – pair 1.5 $145 $1655115.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .8 73 835115.xxx.MRPN Minus Roses – pair (PINNED) 1.5 210 2305116 Levershown w/ 5010 Rose2030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525116.xxx.MR Minus Roses – pair 1.1 $160 $1805116.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 80 905116.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.65117 Levershown w/ 5002 Rose1.75"4.5030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525117.xxx.MR Minus Roses – pair 1.3 $145 $1655117.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835117.xxx.MRPN Minus Roses – pair (PINNED) 1.3 210 2302.25"4.375"5118 Levershown w/ 5035 Rose2030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525118.xxx.MR Minus Roses – pair 1.1 $160 $1805118.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 80 905118.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2452.75All Estate levers are ADA 4.13.9 Compliant4.7

5121 Levershown w/ 5019 RoseLEVERSSOLID BRASS030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525121.xxx.MR Minus Roses – pair 1.0 $145 $1655121.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .5 73 835121.xxx.MRPN Minus Roses – pair (PINNED) 1.0 210 2305122 Levershown w/ 5016 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525122.xxx.MR Minus Roses – pair 1.6 $145 $1655122.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .8 73 835122.xxx.MRPN Minus Roses – pair (PINNED) 1.6 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 585125 Levershown w/ 5017 Rose030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565125.xxx.MR Minus Roses – pair 1.4 $145 $1655125.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835125.xxx.MRPN Minus Roses – pair (PINNED) 1.4 210 2305132 Levershown w/ 5002 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525132.xxx.MR Minus Roses – pair 1.0 $145 $1655132.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .5 73 835132.xxx.MRPN Minus Roses – pair (PINNED) 10 210 2305135 Levershown w/ 5006 Rose030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565135.xxx.MR Minus Roses – pair 1.6 $145 $1655135.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .8 73 835135.xxx.MRPN Minus Roses – pair (PINNED) 1.6 210 23023All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5137 Levershown w/ 5006 Rose030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565137.xxx.MR Minus Roses – pair 2.1 $145 $1655137.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.1 73 835137.xxx.MRPN Minus Roses – pair (PINNED) 2.1 210 2305138 Levershown w/ 5047 Rose2.625≤030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565138.xxx.MR Minus Roses – pair 2.3 $145 $1655138.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.2 73 835138.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 2302.312≤4.0≤5141 Levershown w/ R033 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525141.xxx.MR Minus Roses – pair 1.1 $160 $1805141.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 80 905141.xxx.MRPN Minus Roses – pair (PINNED) 1.1 225 2455152 Levershown w/ 5017 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525152.xxx.MR Minus Roses – pair 1.0 $145 $1655152.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .5 73 835152.xxx.MRPN Minus Roses – pair (PINNED) 1.0 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 585161 Levershown w/ 5006 Rose030, 031033, 034, 040050, 060, 102 003112, 150, 151 055Item # Description Wt. 190, 260, 264 0565161.xxx.MR Minus Roses – pair 1.2 $145 $1655161.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .6 73 835161.xxx.MRPN Minus Roses – pair (PINNED) 1.2 210 230All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5162 Levershown w/ 5032 Rose2.125˝030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525162.xxx.MR Minus Roses – pair 1.4 $145 $1655162.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835162.xxx.MRPN Minus Roses – pair (PINNED) 1.4 210 2302.48≤2.48˝(62.9mm)NOTE: Also available with 8MM square broach for European mortise locks. See page 584.46≤ 4.46˝(113.2mm)5164 Levershown w/ 5006 Rose1.75˝030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525164.xxx.MR Minus Roses – pair 1.3 $145 $1655164.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .7 73 835164.xxx.MRPN Minus Roses – pair (PINNED) 1.3 210 2302.58≤2.58˝(65.6mm)4.19≤4.19˝(106 4mm)5165 Levershown w/ 5032 Rose2.50≤2.50˝(63.6mm)2.125˝030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525165.xxx.MR Minus Roses – pair 1.2 $145 $1655165.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .6 73 835165.xxx.MRPN Minus Roses – pair (PINNED) 1.2 210 2305166 Levershown w/ 5006 Rose2.90≤2.90˝(13.6mm)1.75˝4.58≤ 4.58˝(116 4mm)030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525166.xxx.MR Minus Roses – pair 2.0 $145 $1655166.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.0 73 835166.xxx.MRPN Minus Roses – pair (PINNED) 2.0 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 584.62≤ 4.59˝(117.3mm)5190 Levershown w/ 5042 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525190.xxx.MR Minus Roses – pair 2.3 $145 $1655190.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.2 73 835190.xxx.MRPN Minus Roses – pair (PINNED) 2.3 210 230NOTE: Also available with 8MM square broach for European mortise locks. See page 5825All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5440V Colonial Levershown w/ 5048 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525440V.xxx.MR Minus Roses - pair - $100 $1205440V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 42.5445V Classic Levershown w/ 5048 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525445V.xxx.MR Minus Roses - pair - $100 $1205445V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 42.5447V Bethpage ® Levershown w/ R027 Bethpage Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525447V.xxx.MR Minus Roses - pair - $100 $1205447V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 43.5452V Levershown w/ R030 Arch Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525452V.xxx.MR Minus Roses - pair - $100 $1205452V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 43.5455V Wave Levershown w/ 5048 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525455V.xxx.MR Minus Roses - pair - $100 $1205455V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 43.All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASS5460V Contemporary Levershown w/ 5046 Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525460V.xxx.MR Minus Roses - pair - $100 $1205460V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 43.5485V Soho ® Levershown w/ R026 Soho Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525485V.xxx.MR Minus Roses - pair - $100 $1205485V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60For easy ordering, select finishes and functions ofpre-configured tubular sets are available on page 43.5465V Tahoe Levershown w/ R025 Tahoe Rose030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525465V.xxx.MR Minus Roses - pair - $100 $1205465V.xxx.RMR (.LMR) Minus Roses - half pair - 50 60L002 Levershown w/ R003 Rose2”030, 031033, 034, 040050, 060, 102 402112, 150, 151 412Item # Description Wt. 190, 260, 264 452L002.xxx.MR Minus Roses – pair 1.4 $530 $550L002.xxx.RMR (LMR) Right (Left) Minus Rose – half pair 0.7 265 275Coordinating Cabinet Hardware found on page 2152.63” 4.24”L004 Levershown w/ R007 Rose2”030, 031033, 034, 040050, 060, 102 402112, 150, 151 412Item # Description Wt. 190, 260, 264 452L004.xxx.MR Minus Roses – pair 1.4 $530 $550L004.xxx.RMR (LMR) Right (Left) Minus Rose – half pair 0.7 265 275Coordinating Cabinet Hardware found on page 2152.52”(64.8mm)4.2”(106.7mm)27All Estate levers are ADA 4.13.9 Compliant

LEVERSSOLID BRASSL005 Levershown w/ R009 Rose1.97”030, 031033, 034, 040050, 060, 102 402112, 150, 151 412Item # Description Wt. 190, 260, 264 452L005.xxx.MR Minus Roses – pair 1.4 $530 $550L005.xxx.RMR (LMR) Right (Left) Minus Rose – half pair 0.7 265 2752.55”(64.7mm)5.66”(143.9mm)L006 Levershown w/ R011 Rose2”030, 031033, 034, 040050, 060, 102 402112, 150, 151 412Item # Description Wt. 190, 260, 264 452L006.xxx.MR Minus Roses – pair 1.4 $530 $550L006.xxx.RMR (LMR) Right (Left) Minus Rose – half pair 0.7 265 2752.9”(73.7mm)4.46”(113.4mm)L014 Levershown w/ R018 Rose1.75"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452L014.xxx.MR Minus Roses – pair - $145 $165L014.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair - 73 83L014.xxx.MRPN Minus Roses – pair (PINNED) - 210 2302.9"4.25"L015 Levershown w/ R018 Rose1.75"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452L015.xxx.MR Minus Roses – pair - $145 $165L015.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair - 73 83L015.xxx.MRPN Minus Roses – pair (PINNED) - 210 2302.5"4.4"L016 Levershown w/ 5046 Rose2.625"030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452L016.xxx.MR Minus Roses – pair - $145 $165L016.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair - 73 83L016.xxx.MRPN Minus Roses – pair (PINNED) - 210 2302.275"4.6"All Estate levers are ADA 4.13.9 Compliant

L017 Levershown w/ R017 Rose2.625"LEVERSSOLID BRASS & STAINLESS STEEL030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452L017.xxx.MR Minus Roses – pair - $145 $165L017.xxx.RMR(.LMR) Right (Left) Minus Rose – half pair - 73 83L017.xxx.MRPN Minus Roses – pair (PINNED) - 210 2302.275"4.5"L018 Lever2.5˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452L018.xxx.MR Minus Roses – pair - $145 $165L018.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair - 73 83L018.xxx.MRPN Minus Roses – pair (PINNED) - 210 2304.2˝5.3˝5168S Lever – STAINLESS STEELshown w/ 5032S Rose2.125˝Item # Description Wt. 320, 3245168S.xxx.MR Minus Roses – pair 1.1 $1455168S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 735168S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.65≤ 2.65˝(67.3mm)4.75≤ 4.75˝(120.7mm)5170S Lever – STAINLESS STEELshown w/ 5032S Rose2.125˝Item # Description Wt. 320, 3245170S.xxx.MR Minus Roses – pair 1.1 $1455170S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 735170S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.90≤ 2.90˝(73.6mm)0.44≤ 0.44˝(11.1mm)5172S Lever – STAINLESS STEELshown w/ 5032S Rose2.125˝5.24≤ 5.24˝(133.2mm)Item # Description Wt. 320, 3245172S.xxx.MR Minus Roses – pair 1.1 $1455172S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 735172S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.92≤ 2.92˝(74.2mm)5.23≤ 5.23˝(132.9mm)29All Estate levers are ADA 4.13.9 CompliantBaldwin Stainless Steel products are crafted with Grade 304 Stainless Steel320 & 324 are not rust proof.

LEVERSROSETTESSTAINLESS STEEL|SOLID BRASS5173S Lever – STAINLESS STEELshown w/ 5032S Rose2.125˝Item # Description Wt. 320, 3245173S.xxx.MR Minus Roses – pair 1.1 $1455173S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 735173S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.52≤ 2.52˝(63.9mm)5177S Lever – STAINLESS STEELshown w/ 5032S Rose2.125˝4.74≤ 4.74˝(120.3mm)Item # Description Wt. 320, 3245177S.xxx.MR Minus Roses – pair 1.1 $1455177S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 735177S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 2102.90≤ 2.90˝(73.6mm)4.52≤ 4.52˝(114.8mm)ROSETTESSOLID BRASS5002, 5017, 5048, 5148 Rosettes50021.75˝5017504851482.25˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525002.xxx 1.75˝ Passage – pair5002.xxx.FD 1.75˝ Dummy – pair.2 $36 $465002.xxx.I 1.75˝ Passage – half pair5002.xxx..IDM 1.75˝ Dummy – half pair.1 18 235017.xxx 2.25˝ Passage – pair5017.xxx.FD 2.25˝ Dummy – pair.4 44 545017.xxx.I 2.25˝ Passage – half pair5017.xxx.IDM 2.25˝ Dummy – half pair.2 22 275048.xxx 2.625˝ Passage – pair5048.xxx.FD 2.625˝ Dummy – pair.8 44 545048.xxx.I 2.625˝ Passage – half pair5048.xxx.IDM 2.625˝ Dummy – half pair.4 22 275148.xxx 2.625˝ Privacy – pair .8 44 545148.xxx.I 2.625˝ Privacy – half pair .4 22 27Large enough to cover 2.125˝ pre-bored door5003 Rosette50032.0˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525003.xxx 2˝ Passage – pair5003.xxx.FD 2˝ Dummy – pair.4 $50 $605003.xxx.I 2˝ Passage – half pair5003.xxx.IDM 2˝ Dummy – half pair.2 25 30All Estate levers are ADA 4.13.9 CompliantBaldwin Stainless Steel products are crafted with Grade 304 Stainless Steel320 & 324 are not rust proof.

ROSETTESSOLID BRASS5004, 5149 Rosette500451492.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525004.xxx 2.625˝ Passage – pair5004.xxx.FD 2.625˝ Dummy – pair.8 $50 $605004.xxx.I 2.625˝ Passage – half pair5004.xxx.IDM 2.625˝ Dummy – half pair.4 25 305149.xxx 2.625˝ Privacy – pair .8 50 605149.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door5006, 5032, 5046, 5139, 5146 Rosettes50061.75˝50325139504651462.125˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525006.xxx 1.75˝ Passage – pair5006.xxx.FD 1.75˝ Dummy – pair.3 $36 $465006.xxx.I 1.75˝ Passage – half pair5006.xxx.IDM 1.75˝ Passage – half pair.15 18 235032.xxx 2.125˝ Passage – pair .4 44 545032.xxx.FD 2.125˝ Dummy – pair .4 25 305032.xxx.I 2.125˝ Passage – half pair5032.xxx.IDM 2.125˝ Dummy – half pair.2 22 275139.xxx 2.125˝ Privacy – pair .4 44 545139.xxx.I 2.125˝ Privacy – half pair .2 22 275046.xxx 2.625˝ Passage – pair5046.xxx.FD 2.625˝ Dummy – pair.8 44 545046.xxx.I 2.625˝ Passage – half pair5046.xxx.IDM 2.625˝ Dummy – half pair.4 22 275146.xxx 2.625˝ Privacy – pair .8 44 545146.xxx.I 2.625˝ Privacy – half pair .4 22 27Large enough to cover 2.125˝ pre-bored door5010, 5070, 5123, 5151 Rosettes50105151507051232˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525010.xxx 2˝ Passage – pair5010.xxx.FD 2˝ Dummy – pair.4 $50 $605010.xxx.I 2˝ Passage – half pair5010.xxx.IDM 2˝ Dummy – half pair.2 25 305151.xxx 2˝ Privacy – pair .4 50 605151.xxx.I 2˝ Privacy – half pair .2 25 305070.xxx 2.625˝ Passage – pair5070.xxx.FD 2.625˝ Dummy – pair.8 50 605070.xxx.I 2.625˝ Passage – half pair5070.xxx.IDM 2.625˝ Dummy – half pair.4 25 305123.xxx 2.625˝ Privacy – pair .8 50 605123.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door31

ROSETTESSOLID BRASS5021, 5016, 5145 Rosettes5016502151451.75˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525016.xxx 1.75˝ Passage – pair5016.xxx.FD 1.75˝ Dummy – pair.3 $36 $465016.xxx.I 1.75˝ Passage – half pair5016.xxx.IDM 1.75˝ Dummy – half pair.2 18 235021.xxx 2.625˝ Passage – pair5021.xxx .FD 2.625˝ Dummy – pair.8 50 605021.xxx.I 2.625˝ Passage – half pair5021.xxx.IDM 2.625˝ Dummy – half pair.4 25 305145.xxx 2.625˝ Privacy – pair .8 50 605145.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door5019, 5119 Rosettes501951192.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525019.xxx 2.625˝ Passage – pair5019.xxx.FD 2.625˝ Dummy – pair.5 $50 $605019.xxx.I 2.625˝ Passage – half pair5019.xxx.IDM 2.625˝ Dummy – half pair.3 25 305119.xxx 2.625˝ Privacy – pair .5 50 605119.xxx.I 2.625˝ Privacy – half pair .3 25 30Large enough to cover 2.125˝ pre-bored door5027, 5053, 5062, 5153 Rosettes50621.75˝5027505351532.25˝2.75˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525062.xxx 1.75˝ Passage – pair5062.xxx.FD 1.75˝ Dummy – pair.2 $36 $465062.xxx.I 1.75˝ Passage – half pair5062.xxx.IDM 1.75˝ Dummy – half pair.1 18 235027.xxx 2.25˝ Passage – pair5027.xxx.FD 2.25˝ Dummy – pair.8 50 605027.xxx.I 2.25˝ Passage – half pair5027.xxx.IDM 2.25˝ Dummy – half pair.4 25 305053.xxx 2.625˝ Passage – pair5053.xxx.FD 2.625˝ Dummy – pair.8 50 605053.xxx.I 2.625˝ Passage – half pair5053.xxx.IDM 2.625˝ Dummy – half pair.4 25 305153.xxx 2.625˝ Privacy – pair .8 50 605153.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door

5028, 5075, 5127, 5155 Rosettes50285155507551272˝2.625˝ROSETTESSOLID BRASS030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525028.xxx 2˝ Passage – pair5028.xxx.FD 2˝ Dummy – pair.4 $50 $605028.xxx.I 2˝ Passage – half pair5028.xxx.IDM 2˝ Dummy – half pair.2 25 305155.xxx 2˝ Privacy – pair .4 50 605155.xxx.I 2˝ Privacy – half pair .2 25 305075.xxx 2.625˝ Passage – pair5075.xxx.FD 2.625˝ Dummy – pair.8 50 605075.xxx.I 2.625˝ Passage – half pair5075.xxx.IDM 2.625˝ Dummy – half pair.4 25 305127.xxx 2.625˝ Privacy – pair .8 50 605127.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door5035, 5076, 5129, 5156 Rosettes50355156507651292˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525035.xxx 2˝ Passage – pair5035.xxx.FD 2˝ Dummy – pair.4 $50 $605035.xxx.I 2˝ Passage – half pair5035.xxx.IDM 2˝ Dummy – half pair.2 25 305156.xxx 2˝ Privacy – pair .4 50 605156.xxx.I 2˝ Privacy – half pair .2 25 305076..xxx 2.625˝ Passage – pair5076.xxx.FD 2.625˝ Dummy – pair.8 50 605076.xxx.I 2.625˝ Passage – half pair5076.xxx.IDM 2.625˝ Dummy – half pair.4 25 305129.xxx 2.625˝ Privacy – pair .8 50 605129.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door5038, 5078, 5134, 5157 Rosettes50385157507851342˝2.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525038.xxx 2˝ Passage – pair5038.xxx.FD 2˝ Dummy – pair.4 $50 $605038.xxx.I 2˝ Passage – half pair5038.xxx.IDM 2˝ Dummy – half pair.2 25 305157.xxx 2˝ Privacy – pair .4 50 605157.xxx.I 2˝ Privacy – half pair .2 25 305078..xxx 2.625˝ Passage – pair5078.xxx.FD 2.625˝ Dummy – pair.8 50 605078.xxx.I 2.625˝ Passage – half pair5078.xxx.IDM 2.625˝ Dummy – half pair.4 25 305134.xxx 2.625˝ Privacy – pair .8 50 605134.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door33

ROSETTESSOLID BRASS5042, 5142 Rosettes504251424.125˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 2644024124525042.xxx 2.63˝ x 4.125˝ Passage – pair5042.xxx.FD 2.63˝ x 4.125˝ Dummy – pair1.0 $50 $605042.xxx.I 2.63˝ x 4.125˝ Passage – half pair5042.xxx.IDM 2.63˝ x 4.125˝ Dummy – half pair.5 25 305142.xxx 2.63˝ x 4.125˝ Privacy – pair 1.0 50 605142.xxx.R (L) 2.63˝ x 4.125˝ Privacy – half pair .5 25 302.63˝Large enough to cover 2.125˝ pre-bored door5058, 5158 Rosettes505851582.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525058.xxx 2.625˝ Passage – pair5058.xxx.FD 2.625˝ Dummy – pair.8 $50 $605058.xxx.I 2.625˝ Passage – half pair5058.xxx.IDM 2.625˝ Dummy – half pair.4 25 305158.xxx 2.625˝ Privacy – pair .8 50 605158.xxx.I 2.625˝ Privacy – half pair .4 25 30Large enough to cover 2.125˝ pre-bored door5047, 5147 Rosettes504751472.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525047.xxx 2.625˝ Passage – pair5047.xxx.FD 2.625˝ Dummy – pair.8 $44 $545047.xxx.I 2.625˝ Passage – half pair5047.xxx.IDM 2.625˝ Dummy – half pair.4 22 275147.xxx 2.625˝ Privacy – pair .8 44 545147.xxx.I 2.625˝ Privacy – half pair .4 22 27Large enough to cover 2.125˝ pre-bored door5056, 5160 Rosettes505651602˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525056.xxx 2˝ Passage – pair5056.xxx.FD 2˝ Dummy – pair.8 $44 $545056.xxx.I 2˝ Passage – half pair5056.xxx.IDM 2˝ Dummy – half pair.4 22 275160.xxx 2˝ Privacy – pair .8 44 545160.xxx.I 2˝ Privacy – half pair .4 22 275059, 5159 Rosettes505951594.17˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525059.xxx 2.63˝ x 4.125˝ Passage – pair5059.xxx.FD 2.63˝ x 4.125˝ Dummy – pair1.2 $50 $605059.xxx.I 2.63˝ x 4.125˝ Passage – half pair5059.xxx.IDM 2.63˝ x 4.125˝ Dummy – half pair.6 25 305159.xxx 2.63˝ x 4.125˝ Privacy – pair 1.2 50 605159.xxx.I 2.63˝ x 4.125˝ Privacy – half pair .6 25 302.93˝Large enough to cover 2.125˝ pre-bored door

ROSETTESSOLID BRASSR001, R002 RosettesR001Item # Description Wt.R001.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R001.xxx.FD 2˝ Dummy – pair .5R001.xxx.PV 2˝ Privacy – pair$90 $100R001.xxx.IPS2˝ Passage – half pairR001.xxx.IDM 2˝ Dummy – half pair .3R001.xxx.IPV 2˝ Privacy – half pair45 50R0022-5/8˝R002.xxx.PS 2 5 ⁄8˝ Passage – pairR002.xxx.FD 2 5 ⁄8˝ Dummy – pair .5R002.xxx.PV 2 5 ⁄8˝ Privacy – pairR002.xxx.IPS 2 5 ⁄8˝ Passage – half pair90 100R002.xxx.IDM 2 5 ⁄8˝ Dummy – half pair .3R002.xxx.IPV 2 5 ⁄8˝ Privacy – half pair45 50R003, R004 RosettesR003Item # Description Wt.R003.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R003.xxx.FD 2˝ Dummy – pair .5R003.xxx.PV 2˝ Privacy – pair$90 $100R003.xxx.IPS2˝ Passage – half pairR003.xxx.IDM 2˝ Dummy – half pair .3R003.xxx.IPV 2˝ Privacy – half pair45 50R0042-5/8˝R004.xxx.PSR004.xxx.FDR004.xxx.PVR004.xxx.IPSR004.xxx.IDMR004.xxx.IPV2 5 ⁄8˝ Passage – pair2 5 ⁄8˝ Dummy – pair2 5 ⁄8˝ Privacy – pair2 5 ⁄8˝ Passage – half pair2 5 ⁄8˝ Dummy – half pair2 5 ⁄8˝ Privacy – half pair.5 90 100.3 45 50R005, R006 RosettesR005Item # Description Wt.R005.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R005.xxx.FD 2˝ Dummy – pair .5R005.xxx.PV 2˝ Privacy – pair$90 $100R005.xxx.IPS2˝ Passage – half pairR005.xxx.IDM 2˝ Dummy – half pair .3R005.xxx.IPV 2˝ Privacy – half pair45 50R006R006.xxx.PS 2 5 ⁄8˝ Passage – pairR006.xxx.FD 2 5 ⁄8˝ Dummy – pair .5R006.xxx.PV 2 5 ⁄8˝ Privacy – pair90 1002-5/8˝R006.xxx.IPS 2 5 ⁄8˝ Passage – half pairR006.xxx.IDM 2 5 ⁄8˝ Dummy – half pair .3R006.xxx.IPV 2 5 ⁄8˝ Privacy – half pair45 5035

ROSETTESSOLID BRASSR007, R008 RosettesR007Item # Description Wt.R007.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R007.xxx.FD 2˝ Dummy – pair .5R007.xxx.PV 2˝ Privacy – pair$90 $100R007.xxx.IPS2˝ Passage – half pairR007.xxx.IDM 2˝ Dummy – half pair .3R007.xxx.IPV 2˝ Privacy – half pair45 50R008R008.xxx.PS 2 5 ⁄8˝ Passage – pairR008.xxx.FD 2 5 ⁄8˝ Dummy – pair .5R008.xxx.PV 2 5 ⁄8˝ Privacy – pair90 1002 5 /8˝R008.xxx.IPS 2 5 ⁄8˝ Passage – half pairR008.xxx.IDM 2 5 ⁄8˝ Dummy – half pair .3R008.xxx.IPV 2 5 ⁄8˝ Privacy – half pair45 50R009, R010 RosettesR009Item # Description Wt.R009.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R009.xxx.FD 2˝ Dummy – pair .5R009.xxx.PV 2˝ Privacy – pair$90 $100R009.xxx.IPS2˝ Passage – half pairR009.xxx.IDM 2˝ Dummy – half pair .3R009.xxx.IPV 2˝ Privacy – half pair45 50R010R010.xxx.PS 2 5 ⁄8˝ Passage – pairR010.xxx.FD 2 5 ⁄8˝ Dummy – pair .5R010.xxx.PV 2 5 ⁄8˝ Privacy – pair90 1002 5 /8˝R010.xxx.IPS 2 5 ⁄8˝ Passage – half pairR010.xxx.IDM 2 5 ⁄8˝ Dummy – half pair .3R010.xxx.IPV 2 5 ⁄8˝ Privacy – half pair45 50R011, R012 RosettesR011Item # Description Wt.R011.xxx.PS 2˝ Passage – pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522˝R011.xxx.FD 2˝ Dummy – pair .5R011.xxx.PV 2˝ Privacy – pair$90 $100R0122 5 /8˝R011.xxx.IPS 2˝ Passage – half pairR011.xxx.IDM 2˝ Dummy – half pair .3R011.xxx.IPV 2˝ Privacy – half pairR012.xxx.PS 2 5 ⁄8˝ Passage – pairR012.xxx.FD 2 5 ⁄8˝ Dummy – pair .5R012.xxx.PV 2 5 ⁄8˝ Privacy – pairR012.xxx.IPS 2 5 ⁄8˝ Passage – half pairR012.xxx.IDM 2 5 ⁄8˝ Dummy – half pair .3R012.xxx.IPV 2 5 ⁄8˝ Privacy – half pair45 5090 10045 50

ROSETTESSOLID BRASSR016 RosetteR0162.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R016.xxx.PS 2.625˝ Passage – pairR016.xxx.FD 2.625˝ Dummy – pair.8 $44 $54R016.xxx.IPS 2.625˝ Passage – half pairR016.xxx.IDM 2.625˝ Dummy – half pair.4 22 27R016.xxx.PV 2.625˝ Privacy – pair .8 44 54R016.xxx.IPV 2.625˝ Privacy – half pair .4 22 27Large enough to cover 2.125˝ pre-bored doorR017 RosetteR0172.625˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R017.xxx.PS 2.625˝ Passage – pairR017.xxx.FD 2.625˝ Dummy – pair.8 $44 $54R017.xxx.IPS 2.625˝ Passage – half pairR017.xxx.IDM 2.625˝ Dummy – half pair.4 22 27R017.xxx.PV 2.625˝ Privacy – pair .8 44 54R017.xxx.IPV 2.625˝ Privacy – half pair .4 22 27Large enough to cover 2.125˝ pre-bored doorR018 RosetteR0181.75˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R018.xxx.PS 1.75˝ Passage – pairR018.xxx.FD 1.75˝ Dummy – pair.3 $36 $46R018.xxx.IPS 1.75˝ Passage – half pairR018.xxx.IDM 1.75˝ Passage – half pair.15 18 23R025 Tahoe RosetteR0253.587˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R025.xxx.PS 3.587” Tahoe Passage - pairR025.xxx.FD 3.587” Tahoe Dummy - pair.8 $44 $54R025.xxx.IPS 3.587” Tahoe Passage - half pairR025.xxx.IDM 3.587” Tahoe Dummy - half pair.4 22 27R025.xxx.PV 3.587” Tahoe Privacy - pair .8 44 54R025.xxx.RPV (.LPV) 3.587” Tahoe Privacy - half pair .4 22 27R026 Soho RosetteR0263˝030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R026.xxx.PS 3” Soho Passage - pairR026.xxx.FD 3” Soho Dummy - pair.8 $44 $54R026.xxx.IPS 3” Soho Passage - half pairR026.xxx.IDM 3” Soho Dummy - half pair.4 22 27R026.xxx.PV 3” Soho Privacy - pair .8 44 54R026.xxx.IPV 3” Soho Privacy - half pair .4 22 2737

ROSETTESSOLID BRASSR027 – R029 Bethpage RosettesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R027R028R027.xxx.PSR027.xxx.FD3.25˝ Bethpage Passage - pair3.25˝ Bethpage Dummy - pair$44 $543.25˝5.65˝R027.xxx.IPSR027.xxx.IDM3.25˝ Bethpage Passage - half pair3.25˝ Bethpage Dummy - half pair22 27R027.xxx.PV 3.25˝ Bethpage Privacy - pair 44 54R027.xxx.IPV 3.25˝ Bethpage Privacy - half pair 22 27R028.xxx.PSR028.xxx.FD5.65˝ Bethpage Passage - pair5.65˝ Bethpage Dummy - pair90 100R028.xxx.IPSR028.xxx.IDM5.65˝ Bethpage Passage - half pair5.65˝ Bethpage Dummy - half pair45 50R029R028.xxx.PV 5.65˝ Bethpage Privacy - pair 90 100R028.xxx.RPV (.LPV) 5.65˝ Bethpage Privacy - half pair 45 50R029.xxx.PSR029.xxx.FD10.14˝ Bethpage Passage - pair10.14˝ Bethpage Dummy - pair180 200R029.xxx.IPSR029.xxx.IDM10.14˝ Bethpage Passage - half pair10.14˝ Bethpage Dummy - half pair90 10010.14˝R029.xxx.PV 10.14˝ Bethpage Privacy - pair 180 200R029.xxx.RPV (.LPV) 10.14˝ Bethpage Privacy - half pair 90 100R029.xxx.ENTR 10.14˝ Bethpage Entry Kit - pair 325 345R029.xxx.EGRKR029.xxx.EGRL10.14˝ Bethpage Entry Egress Kit - Knob Adaptor10.14˝ Bethpage Entry Egress Kit - Lever Adaptor400 420Entry Kits:· Not sold in 030 Finish.· Support 1 ¾˝ doors.· Non-Egress: Must order knob/lever latch and desired knob or lever separately.· Egress: Must order desired knob or lever separately. Can use 5399.xxx.C thick door kit if desired.· Order 6502.009 adaptor & spindle separately.R030 – R032 Arch RosettesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R030R031R030.xxx.PSR030.xxx.FD3.95˝ Arch Passage - pair3.95˝ Arch Dummy - pair$44 $543.95˝5.9˝R030.xxx.IPSR030.xxx.IDM3.95˝ Arch Passage - half pair3.95˝ Arch Dummy - half pair22 27R030.xxx.PV 3.95˝ Arch Privacy - pair 44 54R030.xxx.IPV 3.95˝ Arch Privacy - half pair 22 27R031.xxx.PSR031.xxx.FDR031.xxx.IPSR031.xxx.IDM5.9˝ Arch Passage - pair5.9˝ Arch Dummy - pair5.9˝ Arch Passage - half pair5.9˝ Arch Dummy - half pair90 10045 50R031.xxx.PV 5.9˝ Arch Privacy - pair 90 100R032R031.xxx.RPV (.LPV) 5.9˝ Arch Privacy - half pair 45 50R032.xxx.PS 10.53˝ Arch Passage - pairR032.xxx.FD 10.53˝ Arch Dummy - pair180 200R032.xxx.IPS 10.53˝ Arch Passage - half pairR032.xxx.IDM 10.53˝ Arch Dummy - half pair90 100R032.xxx.PV 10.53˝ Arch Privacy - pair 180 200R032.xxx.RPV (.LPV) 10.53˝ Arch Privacy - half pair 90 10010.53˝R032.xxx.ENTR 10.53˝ Arch Entry Kit - pair 325 345R032.xxx.EGRK 10.53˝ Arch Entry Egress Kit - Knob AdaptorR032.xxx.EGRL 10.53˝ Arch Entry Egress Kit - Lever Adaptor400 420Entry Kits:· Not sold in 030 Finish.· Support 1 ¾˝ doors.· Non-Egress: Must order knob/lever latch and desired knob or lever separately.· Egress: Must order desired knob or lever separately. Can use 5399.xxx.C thick door kit if desired.· Order 6502.009 adaptor & spindle separately.

ROSETTESSOLID BRASSR033 – R035 Square RosettesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R0333.225˝R0345.25˝R033.xxx.PSR033.xxx.FDR033.xxx.IPSR033.xxx.IDM3.225˝ Square Passage - pair3.225˝ Square Dummy - pair3.225˝ Square Passage - half pair3.225˝ Square Dummy - half pair$44 $5422 27R033.xxx.PV 3.225˝ Square Privacy - pair 44 54R033.xxx.IPV 3.225˝ Square Privacy - half pair 22 27R035R034.xxx.PS 5.25˝ Square Passage - pairR034.xxx.FD 5.25˝ Square Dummy - pair90 100R034.xxx.IPS 5.25˝ Square Passage - half pairR034.xxx.IDM 5.25˝ Square Dummy - half pair45 50R034.xxx.PV 5.25˝ Square Privacy - pair 90 100R034.xxx.RPV (.LPV) 5.25˝ Square Privacy - half pair 45 50R035.xxx.PS 9.4˝ Square Passage - pairR035.xxx.FD 9.4˝ Square Dummy - pair180 200R035.xxx.IPS 9.4˝ Square Passage - half pairR035.xxx.IDM 9.4˝ Square Dummy - half pair90 1009.4˝R035.xxx.PV 9.4˝ Square Privacy - pair 180 200R035.xxx.RPV (.LPV) 9.4˝ Square Privacy - half pair 90 100R035.xxx.ENTR 9.4˝ Square Entry Kit - pair 325 345R035.xxx.EGRKR035.xxx.EGRL9.4˝ Square Entry Egress Kit - Knob Adaptor9.4˝ Square Entry Egress Kit - Lever Adaptor400 420Entry Kits:· Not sold in 030 Finish.· Support 1 ¾˝ doors.· Non-Egress: Must order knob/lever latch and desired knob or lever separately.· Egress: Must order desired knob or lever separately. Can use 5399.xxx.C thick door kit if desired.· Order 6502.009 adaptor & spindle separately.R036 – R038 Square Rope RosettesR036R0373.225˝5.25˝Item #R036.xxx.PSR036.xxx.FDR036.xxx.IPSR036.xxx.IDMDescription3.225˝ Square Rope Passage - pair3.225˝ Square Rope Dummy - pair3.225˝ Square Rope Passage - half pair3.225˝ Square Rope Dummy - half pair030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 402412, 452$44 $5422 27R036.xxx.PV 3.225˝ Square Rope Privacy - pair 44 54R036.xxx.IPV 3.225˝ Square Rope Privacy - half pair 22 27R037.xxx.PSR037.xxx.FDR037.xxx.IPSR037.xxx.IDM5.25˝ Square Rope Passage - pair5.25˝ Square Rope Dummy - pair5.25˝ Square Rope Passage - half pair5.25˝ Square Rope Dummy - half pair90 10045 50R037.xxx.PV 5.25˝ Square Rope Privacy - pair 90 100R038R037.xxx.RPV (.LPV) 5.25˝ Square Rope Privacy - half pair 45 50R038.xxx.PS 9.4˝ Square Rope Passage - pairR038.xxx.FD 9.4˝ Square Rope Dummy - pair180 200R038.xxx.IPS 9.4˝ Square Rope Passage - half pairR038.xxx.IDM 9.4˝ Square Rope Dummy - half pair90 100R038.xxx.PV 9.4˝ Square Rope Privacy - pair 180 200R038.xxx.RPV (.LPV) 9.4˝ Square Rope Privacy - half pair 90 1009.4˝R038.xxx.ENTR 9.4˝ Square Rope Entry Kit - pair 325 345Entry Kits: Not sold in 030 Finish. Must order knob/lever latch separately with desired style.Support 1 ¾˝ doors.· Order 6502.009 adaptor & spindle separately.39

ROSETTESSOLID BRASSR039 – R041 Oval RosettesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452R0393.8˝R0405.8˝R039.xxx.PSR039.xxx.FDR039.xxx.IPSR039.xxx.IDM3.8” Oval Passage - pair3.8” Oval Dummy - pair3.8” Oval Passage - half pair3.8” Oval Dummy - half pair$44 $5422 27R039.xxx.PV 3.8” Oval Privacy - pair 44 54R039.xxx.IPV 3.8” Oval Privacy - half pair 22 27R040.xxx.PSR040.xxx.FDR040.xxx.IPSR040.xxx.IDM5.8” Oval Passage - pair5.8” Oval Dummy - pair5.8” Oval Passage - half pair5.8” Oval Dummy - half pair90 10045 50R041R040.xxx.PV 5.8” Oval Privacy - pair 90 100R040.xxx.RPV (.LPV) 5.8” Oval Privacy - half pair 45 50R041.xxx.PS 10.75” Oval Passage - pairR041.xxx.FD 10.75” Oval Dummy - pair180 200R041.xxx.IPS 10.75” Oval Passage - half pairR041.xxx.IDM 10.75” Oval Dummy - half pair90 100R041.xxx.PV 10.75” Oval Privacy - pair 180 20010.75˝R041.xxx.RPV (.LPV) 10.75” Oval Privacy - half pair 90 100R041.xxx.ENTR 10.75” Oval Entry Kit - pair 325 345R041.xxx.EGRKR041.xxx.EGRL10.75˝ Oval Entry Egress Kit - Knob Adaptor10.75˝ Oval Entry Egress Kit - Lever Adaptor400 420Entry Kits:· Not sold in 030 Finish.· Support 1 ¾˝ doors.· Non-Egress: Must order knob/lever latch and desired knob or lever separately.· Egress: Must order desired knob or lever separately. Can use 5399.xxx.C thick door kit if desired.· Order 6502.009 adaptor & spindle separately.R042 – R044 Oval Rope RosettesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 402412, 452R0423.95˝R0435.9˝R042.xxx.PSR042.xxx.FDR042.xxx.IPSR042.xxx.IDM3.8” Oval Rope Passage - pair3.8” Oval Rope Dummy - pair3.8” Oval Rope Passage - half pair3.8” Oval Rope Dummy - half pair$44 $5422 27R042.xxx.PV 3.8” Oval Rope Privacy - pair 44 54R042.xxx.IPV 3.8” Oval Rope Privacy - half pair 22 27R043.xxx.PSR043.xxx.FDR043.xxx.IPSR043.xxx.IDM5.8” Oval Rope Passage - pair5.8” Oval Rope Dummy - pair5.8” Oval Rope Passage - half pair5.8” Oval Rope Dummy - half pair90 10045 50R043.xxx.PV 5.8” Oval Rope Privacy - pair 90 100R044R043.xxx.RPV (.LPV) 5.8” Oval Rope Privacy - half pair 45 50R044.xxx.PS 10.75” Oval Rope Passage - pairR044.xxx.FD 10.75” Oval Rope Dummy - pair180 200R044.xxx.IPS 10.75” Oval Rope Passage - half pairR044.xxx.IDM 10.75” Oval Rope Dummy - half pair90 100R044.xxx.PV 10.75” Oval Rope Privacy - pair 180 200R044.xxx.RPV (.LPV) 10.75” Oval Rope Privacy - half pair 90 10010.53˝R044.xxx.ENTR 10.75” Oval Rope Entry Kit - pair 325 345Entry Kits: Not sold in 030 Finish. Must order knob/lever latch separately with desired style.Support 1 ¾˝ doors.· Order 6502.009 adaptor & spindle separately.

ROSETTESKNOBSSTAINLESS STEEL| PRE-CONFIGURED SETS5032S, 5033S, 5034S, 5133S, 5139S Rosettes – STAINLESS STEEL5034S1.75˝5032S5139S5033S5133S2.125˝2.625˝Item # Description Wt. 320, 3245034S.xxx 1.75˝ Passage – pair5034S.xxx.FD 1.75˝ Dummy – pair.3 $365034S.xxx.I 1.75˝ Passage – half pair5034S.xxx.IDM 1.75˝ Dummy – half pair.15 185032S.xxx 2.125˝ Passage – pair5032S.xxx.FD 2.125˝ Dummy – pair.4 445032S.xxx.I 2.125˝ Passage – half pair5032S.xxx.IDM 2.125˝ Dummy – half pair.2 225139S.xxx 2.125˝ Privacy – pair .4 445139S.xxx.I 2.125˝ Privacy – half pair .2 225033S.xxx 2.625˝ Passage – pair5033S.xxx.FD 2.625˝ Dummy – pair.8 445033S.xxx.I 2.625˝ Passage – half pair5033S.xxx.IDM 2.625˝ Dummy – half pair.4 225133S.xxx 2.625˝ Privacy – pair .8 445133S.xxx.I 2.625˝ Privacy – half pair .4 22Large enough to cover 2.125˝ pre-bored doorNote: 320 & 324 is not available as rust proofKNOBSPRE-CONFIGURED SETS5015 Classic Knob w/ 5048 RosePassage, Privacy & Dummy003Item # Description Wt.030, 102112, 150, 260055, 402,412, 4525015.xxx.FD Full Dummy 1.9 $120 $1505015.xxx.IDM Half Dummy 1.0 60 755015.xxx.PASS Passage: 2 3 ⁄8˝ backset5015.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.5 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5020 Colonial Knob w/ 5048 RosePassage, Privacy & DummyItem # Description Wt.030, 102112, 150 0035020.xxx.FD Full Dummy 2.0 $120 $1505020.xxx.IDM Half Dummy 1.0 60 755020.xxx.PASS Passage: 2 3 ⁄8˝ backset5020.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.6 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5025 Egg Knob w/ 5048 RosePassage, Privacy & Dummy2.562"2.5" 2.562"Item # Description Wt.030, 102112, 150, 260003055, 4025025.xxx.FD Full Dummy 2.8 $120 $1505025.xxx.IDM Half Dummy 1.6 60 755025.xxx.PASS Passage: 2 3 ⁄8˝ backset5025.xxx.PRIV Privacy: 2 3 ⁄8˝ backset3.4 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.Baldwin Stainless Steel products are crafted with Grade 304 Stainless Steel41

KNOBS & LEVERSPRE-CONFIGURED SETS5041 Contemporary Knob w/ 5046 RosePassage, Privacy & Dummy2.812"Item # Description Wt. 150, 2605041.xxx.FD Full Dummy 2.5 $1205041.xxx.IDM Half Dummy 1.3 605041.xxx.PASS Passage: 2 3 ⁄8˝ backset5041.xxx.PRIV Privacy: 2 3 ⁄8˝ backset3.1 1502.125"2.562"· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5077 Bethpage Knob w/ R027 RosePassage, Privacy & Dummy2.838"Item # Description Wt. 1125077.xxx.FD Full Dummy 2.9 $1205077.xxx.IDM Half Dummy 1.5 605077.xxx.PASS Passage: 2 3 ⁄8˝ backset5077.xxx.PRIV Privacy: 2 3 ⁄8˝ backset3.6 1502.511" 2.6· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5080 Fillmore Knob w/ 5048 RosePassage, Privacy & Dummy2.69"Item # Description Wt.030, 102,112, 150, 2605080.xxx.FD Full Dummy 2.5 $1205080.xxx.IDM Half Dummy 1.3 605080.xxx.PASS Passage: 2 3 ⁄8˝ backset5080.xxx.PRIV Privacy: 2 3 ⁄8˝ backset3.1 1502.19" 2.53"· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.LEVERSPRE-CONFIGURED SETS5440V Colonial Lever w/ 5048 RosePassage, Privacy & DummyItem # Description Wt. 1505440V.xxx.FD Full Dummy 1.6 $1205440V.xxx.RDM RIGHT Hand Half Dummy5440V.xxx.LDM LEFT Hand Half Dummy1.1 605440V.xxx.PASS Passage: 2 3 ⁄8˝ backset5440V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.3 150· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5445V Classic Lever w/ 5048 RosePassage, Privacy & DummyItem # Description Wt.030, 102112, 150 0035445V.xxx.FD Full Dummy 1.5 $120 $1505445V.xxx.RDM RIGHT Hand Half Dummy5445V.xxx.LDM LEFT Hand Half Dummy1.1 60 755445V.xxx.PASS Passage: 2 3 ⁄8˝ backset5445V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.1 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.All Estate levers are ADA 4.13.9 Compliant

LEVERSPRE-CONFIGURED SETS5447V Bethpage Lever w/ R027 RosePassage, Privacy & DummyItem # Description Wt. 1125447V.xxx.FD Full Dummy 2.0 $1205447V.xxx.RDM RIGHT Hand Half Dummy5447V.xxx.LDM LEFT Hand Half Dummy1.0 605447V.xxx.PASS Passage: 2 3 ⁄8˝ backset5447V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.5 150· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5452V Beavertail Lever w/ R030 RosePassage, Privacy & DummyItem # Description Wt. 102, 112 402, 4125452V.xxx.FD Full Dummy 2.4 $120 $1505452V.xxx.RDM RIGHT Hand Half Dummy5452V.xxx.LDM LEFT Hand Half Dummy1.1 60 755452V.xxx.PASS Passage: 2 3 ⁄8˝ backset5452V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.9 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5455V Wave Lever w/ 5048 RosePassage, Privacy & Dummy030, 050,Item # Description Wt.102, 112,150, 151, 260003, 056402, 4125455V.xxx.FD Full Dummy 1.5 $120 $1505455V.xxx.RDM RIGHT Hand Half Dummy5455V.xxx.LDM LEFT Hand Half Dummy0.8 60 755455V.xxx.PASS Passage: 2 3 ⁄8˝ backset5455V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.1 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5460V Contemporary Lever w/ Contemporary RosePassage, Privacy & DummyItem # Description Wt. 150, 2605460V.xxx.FD Full Dummy 1.9 $1205460V.xxx.RDM RIGHT Hand Half Dummy5460V.xxx.LDM LEFT Hand Half Dummy1.1 605460V.xxx.PASS Passage: 2 3 ⁄8˝ backset5460V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.4 150· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.5485V Soho Lever w/ R026 RosePassage, Privacy & DummyItem # Description Wt. 102, 150 0565485V.xxx.FD Full Dummy 1.8 $120 $1505485V.xxx.RDM RIGHT Hand Half Dummy5485V.xxx.LDM LEFT Hand Half Dummy1.0 60 755485V.xxx.PASS Passage: 2 3 ⁄8˝ backset5485V.xxx.PRIV Privacy: 2 3 ⁄8˝ backset2.3 150 180· Other finishes and roses available a la carte.· 1-3/8” thick doors only.· PASS and PRIV functions ship with full lip strike.43All Estate levers are ADA 4.13.9 Compliant

KNOBSTUBULAR KEYED ENTRYClassic Knob w/ Classic Rose031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525205.xxx.ENTR Emergency Exit5206.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors3.1 $220 $2505205.xxx.FD Full Dummy5206.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors1.9 190 2205208.xxx.ENTR Standard5209.xxx.ENTR Standard: 1 7 ⁄8˝ to 2 ¼˝ doors3.1 220 250Colonial Knob w/ Classic Rose031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525210.xxx.ENTR Emergency Exit5211.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors3.1 $220 $2505210.xxx.FD Full Dummy5211.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors2.1 190 2205213.xxx.ENTR Standard5214.xxx.ENTR Standard: 1 7 ⁄8˝ to 2 ¼˝ doors3.1 220 250Contemporary Knob w/ Contemporary RoseTahoe Knob w/ Tahoe RoseItem # Description Wt.5215.xxx.ENTR Emergency Exit5216.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors5215.xxx.FD Full Dummy5216.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors5218.xxx.ENTR Standard5219.xxx.ENTR Standard: 1 7 ⁄8˝ to 2 ¼˝ doors5 pin standard6 pin capability031, 033034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4523.4 $220 $2502.5 190 2203.4 220 250031, 033034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 4525220.xxx.ENTR Emergency Exit5221.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors4.2 $220 $2505220.xxx.FD Full Dummy5221.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors3.9 190 2205223.xxx.ENTR Standard5224.xxx.ENTR Standard: 1 7 ⁄8˝ to 2 ¼˝ doors4.2 220 2505 pin standard6 pin capabilityEgg Knob w/ Classic RoseItem # Description Wt.5225.xxx.ENTR Emergency Exit5226.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors5225.xxx.FD Full Dummy5226.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors5228.xxx.ENTR Standard5 pin standard 5229.xxx.ENTR6 pin capabilityStandard: 1 7 ⁄8˝ to 2 ¼˝ doors031, 033034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4523.6 $220 $2503.0 190 2203.6 220 250Emergency Exit: The Knob or lever will retract the bolt while the exterior remains locked.Standard Exit: The knob or lever must be unlocked prior to exit.

KNOBS & LEVERSTUBULAR KEYED ENTRYBethpage Knob2.58˝(66.0mm)2.52˝(64.0mm)3.28˝(83.0mm)2.78˝(71.0mm)2.51˝(64.0mm)5 pin standard6 pin capability031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525237.xxx.ENTR Emergency Exit5238.xxx.ENTR Emergency Exit: 1 7 ⁄8˝ to 2 ¼˝ doors3.6 $220 $2505237.xxx.FD Full Dummy5238.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors3.0 190 2205239.xxx.ENTR Standard 3.65241.xxx.ENTR Standard: 1 7 ⁄8˝ to 2 ¼˝ doors 3.0220 250LEVERSTUBULAR KEYED ENTRYBethpage Lever w/ Bethpage Rose2.40˝(61.0mm)4.45˝(113.0mm)2.57˝(65.0mm)2.78˝(71.0mm)4.45˝(113.0mm)5 pin standard6 pin capability031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525237.xxx.RENT RIGHT Hand Emergency Exit5237.xxx.LENT LEFT Hand Emergency Exit3.95238.xxx.RENT RIGHT Hand Emergency Exit:$220 $2501 7 ⁄8˝ to 2 ¼˝ doors5238.xxx.LENT LEFT Hand Emergency Exit:3.51 7 ⁄8˝ to 2 ¼˝ doors5237.xxx.LRFD Full Dummy5238.xxx.LRFD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors3.0 190 2205239.xxx.RENT RIGHT Hand Standard5239.xxx.LENT LEFT Hand Standard3.95241.xxx.RENT RIGHT Hand Standard:220 2501 7 ⁄8˝ to 2 ¼˝ doors 3.55241.xxx.LENT LEFT Hand Standard: 1 7 ⁄8˝ to 2 ¼˝ doorsClassic Lever w/ Classic Rose5 pin standard6 pin capability031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525245.xxx.RENT RIGHT Hand Emergency Exit5245.xxx.LENT LEFT Hand Emergency Exit2.25246.xxx.RENT RIGHT Hand Emergency Exit:$220 $2501 7 ⁄8˝ to 2 ¼˝ doors5246.xxx.LENT LEFT Hand Emergency Exit:2.21 7 ⁄8˝ to 2 ¼˝ doors5245.xxx.FD Full Dummy5246.xxx.FD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors2.0 190 2205248.xxx.RENT RIGHT Hand Standard 2.25248.xxx.LENT LEFT Hand Standard 2.05249.xxx.RENT RIGHT Hand Standard:1 7 ⁄8˝ to 2 ¼˝ doors5249.xxx.LENT LEFT Hand Standard:2.21 7 ⁄8˝ to 2 ¼˝ doors220 25045Emergency Exit: The Knob or lever will retract the bolt while the exterior remains locked.Standard Exit: The knob or lever must be unlocked prior to exit.

LEVERSTUBULAR KEYED ENTRY|LATCHESINTERIOR & ENTRANCE HARDWAREWave Lever w/ Classic Rose5 pin standard6 pin capabilityItem # Description Wt.5255.xxx.RENT RIGHT Hand Emergency Exit5255.xxx.LENT5256.xxx.RENT5256.xxx.LENT5255.xxx.FD5256.xxx.FD5258.xxx.RENT5258.xxx.LENT5259.xxx.RENT5259.xxx.LENTLEFT Hand Emergency ExitRIGHT Hand Emergency Exit:1 7 ⁄8˝ to 2 ¼˝ doorsLEFT Hand Emergency Exit:1 7 ⁄8˝ to 2 ¼˝ doorsFull DummyFull Dummy: 1 7 ⁄8˝ to 2 ¼˝ doorsRIGHT Hand StandardLEFT Hand StandardRIGHT Hand Standard:1 7 ⁄8˝ to 2 ¼˝ doorsLEFT Hand Standard:1 7 ⁄8˝ to 2 ¼˝ doors031, 033034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4522.8 $220 $2502.0 160 2202.82.8220 250Tahoe Levershown w/ R025 Tahoe Rose5 pin standard6 pin capability031, 033034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525265.xxx.RENT RIGHT Hand Emergency Exit5265.xxx.LENT LEFT Hand Emergency Exit3.9 $220 $2505265.xxx.LRFD Full Dummy 2.0 190 2205266.xxx.RENT RIGHT Hand Emergency Exit:1 7 ⁄8˝ to 2 ¼˝ doors3.9 220 2505266.xxx.LENT LEFT Hand Emergency Exit:1 7 ⁄8˝ to 2 ¼˝ doors5266.xxx.LRFD Full Dummy: 1 7 ⁄8˝ to 2 ¼˝ doors 2.0 190 2205268.xxx.RENT RIGHT Hand Standard5268.xxx.LENT5269.xxx.RENT5269.xxx.LENTLEFT Hand StandardRIGHT Hand Standard:1 7 ⁄8˝ to 2 ¼˝ doorsLEFT Hand Standard:1 7 ⁄8˝ to 2 ¼˝ doors3.9 220 250INTERIOR & ENTRANCE HARDWARELATCHES5210 & 5300 Replacement LatchesUniversal Deadlocking Latch for Keyed EntryItem # Adjustable Backset Front Length Front Width Description5210.xxx 2.375˝ (60mm) 2.25˝ (57mm) 1˝ (25mm) Deadlocking2.75˝ (70mm)Latch BoltFEATURES: Latch bolts have a .5˝ throw, are reversible and can be used on beveleddoors. Latches are supplied with 1˝ (25mm) face plates.PACKED: One per box with strike, fasteners and template$45Adjustable Latch for Tubular HandlesetsItem # Description5300.xxx.9 Adjustable Latch $40 $435510 & 5513.xxx.0030 – Privacy ButtonItem # Description5510.xxx.0030 Privacy Button – All Knob-Strength latches $10 $15Furnished with all privacy tubular latch sets (latches ordered .P)5510 ships with 1.16˝ long button and 5199.000 extender5199.000 – Privacy Button ExtenderItem # Description5199.000 Privacy Button Extender $5 —Use to extend length of privacy button in applications where hardware is installed on doors over1.75˝ thick and/or with escutcheon plates thicker than .25˝All Estate levers are ADA 4.13.9 Compliant

Passage & Privacy LatchesAnti-friction insertPrivacy ButtonINTERIOR & ENTRANCE HARDWARELATCHESPassage LatchesItem # Description Backset Faceplate5510.xxx (.ASA, .FLS) Knob-Strength Passage latch 2.375˝ 1˝ w5512.xxx* (.ASA) Knob-Strength Passage latch 2.375˝ 1.125˝ w5513.xxx (.ASA, .FLS) Lever-Strength Passage latch 2.375˝ 1˝ w5515.xxx* (.ASA) Lever-Strength Passage latch 2.375˝ 1.125˝ w5520.xxx (.ASA, .FLS) Knob-Strength Passage latch 2.75˝ 1˝ w5522.xxx* (.ASA) Knob-Strength Passage latch 2.75˝ 1.125˝ w5523.xxx (.ASA, .FLS) Lever-Strength Passage latch 2.75˝ 1˝ w5525.xxx* (.ASA) Lever-Strength Passage latch 2.75˝ 1.125˝ w030, 031, 033, 034038, 040, 050, 060102, 112, 150, 151152, 190, 260, 264003055056$55 $601˝ WIDE FACEPLATE 1.125˝ WIDE FACEPLATE*2.375˝ BACKSET LATCH2.75˝ BACKSET LATCHPrivacy LatchesItem # Description Backset Faceplate Tier 1 Tier 25510.xxx.P (.ASA, .FLS) Knob-Strength Privacy latch 2.375˝ 1˝ w5512.xxx.P* (.ASA) Knob-Strength Privacy latch 2.375˝ 1.125˝ w5513.xxx.P (.ASA, .FLS) Lever-Strength Privacy latch 2.375˝ 1˝ w5515.xxx.P* (.ASA) Lever-Strength Privacy latch 2.375˝ 1.125˝ w$55 $605520.xxx.P (.ASA, .FLS) Knob-Strength Privacy latch 2.75˝ 1˝ w5522.xxx.P* (.ASA) Knob-Strength Privacy latch 2.75˝ 1.125˝ w5523.xxx.P (.ASA, .FLS) Lever-Strength Privacy latch 2.75˝ 1˝ w5525.xxx.P* (.ASA) Lever-Strength Privacy latch 2.75˝ 1.125˝ wLatches NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=152*Latches with 1.125˝ wide faceplate commonly used for commercial applicationsLatches available with Standard strike (no suffix), ASA strike (.ASA) or Full Lip Strike (.FLS)Example: 5510.xxx = Standard strike5510.xxx.ASA = ASA strike5510.xxx.FLS = Full Lip StrikeALL INTERIOR LATCHES:> Hub rotation only 28° for easy turning> Non-handed latches (reversible)> Fully adjustable fronts for use on beveled doors> Bolt head features anti-friction insertfor smooth operation> Lever-Strength latches manufacturedwith heavy duty springsINCLUDED WITH INTERIOR LATCHES:> Standard Box Strike (T-Strike)> ASA or Full Lip Strike also availableat no charge – specify as follows:5510.xxx.ASA Latch x ASA Strike5510.xxx.FLS Latch × Full Lip Strike> Wood fasteners and template> Dust Box – 5510.000 (not included with .FLS & .ASAlatches)> 3.5˝ spindle*> Privacy Button (with Privacy Latches)NOTE: For doors thicker than 1.75˝ or use with escutcheon plates, a longer spindle is likely needed. See Spindle Chart on pg 50.UL LISTED Estate Passage/PrivacyOnly select Estate passage and privacy sets have been certified by UL at this time.This is determined by the rose that is used on the particular set, along with theuse of the Estate 6502.009 adaptor. Estate roses that meet the UL requirementwhen used in conjunction with the Estate 6502.009 adaptor are as follows:ORDERING:1.) Choose your Estate knob or lever pair2.) Choose your Estate passage or privacy rose from the list above3.) Choose your knob or lever latch4.) Add the 6502.009 adaptor5.) Choose the UL kit for Estate passage or privacy sets in the finishthat matches your knob or lever latch: U5510.xxx030, 031, 033034, 040, 050Item # Description060, 102, 112150, 151, 152190, 260, 264003055056U5510.xxx UL Kit for Estate passage or privacy sets $20 $25Included with each kit:UL latch faceplate, Inside & Outside UL Shield, UL Retaining Ring501950215033S5042504650475048505350585059507050765078511951235126512751295133S5134514251455146514751485149515351585159Note: all components from the passage/privacy kit must be used for UL certification47

INTERIOR & ENTRANCE HARDWARESTRIKES5510.TSTR – Standard Box Strike (T Strike)Included with all Passage & Privacy LatchesCROSS SECTIONItem #5510.xxx.TSTRDescriptionStandard Box Strike (Included with allPassage & Privacy Latches)030, 031, 033034, 040, 050060, 102, 112150, 151, 152190, 260, 264LIP TO CENTER DIMENSION (LTC): 1.312˝ (33mm)DUST BOX: furnished unattached (55100)TEMPLATE: metal frames to be prepared in accordance with ANSI standard A115.2003055056$15 $205510.ASTR – ASA strikeCROSS SECTION030, 031, 033034, 040, 050Item # Description060, 102, 112150, 151, 152190, 260, 2640030550565510.xxx.ASTR ASA Strike $15 $20LTC: 1.25˝ (32mm)DUST BOX: not furnishedTemplate: metal frames to be prepared in accordance with ANSI standard A115.25510.E158, .E178, .E214 – Extended T strikeCROSS SECTIONItem #5510.xxx.E158DescriptionExtended Lip Box Strike – 1.625˝ LTC5510.xxx.E178 Extended Lip Box Strike – 1.875˝ LTC5510.xxx.E214 Extended Lip Box Strike – 2.25˝ LTCLTC: 5510.xxx.E158 – 1.625˝ (41mm)LTC: 5510.xxx.E178 – 1.875˝ (48mm)LTC: 5510.xxx.E214 – 2.25˝ (57mm)DUST BOX: not furnished (use dust box provides with standard T strike)030, 031, 033034, 040, 050060, 102, 112150, 151, 152190, 260, 264003055056$15 $205510.FSTR – Full lip strikeCROSS SECTION030, 031, 033034, 040, 050Item # Description060, 102, 112150, 151, 152190, 260, 2640030550565510.xxx.FSTR Full Lip Strike $15 $20LTC: 1.125˝ (29mm)DUST BOX: not available5300.EFLS – Extended full lip strike (ONLY SIZE AVAILABLE)CROSS SECTION030, 031, 033034, 040, 050Item # Description060, 102, 112150, 151, 152190, 260, 2640030550565300.xxx.EFLS Extended Full Lip Strike $15 $20For 2˝ (51mm) and 2.25˝ (57mm) thick doors or when trim condition necessitates a larger strikeCan also be used with Estate handlesets and interior setsLTC: 1.375˝ (35mm).5528.R (.L) – Combination privacy strike – ESCUTCHEON5510.000 – Dust boxCROSS SECTION0417 Emergency Key030, 031, 033034, 040, 050060, 102, 112 003150, 151, 152 055Item # Description190, 260, 264 0565528.xxx.R (.L) Combination Privacy Strike $15 $20LTC: 1.28˝ (33mm), other lengths not availableFEATURES: Permits use of 5500 series tubular latches and 0413 or 0418 mortise boltswith KT and KE escutcheon trimStrike is designed with a curved lip, so proper hand of door is requiredFurnished with 0417 Emergency key standardDUST BOX: Boxes furnished with tubular latches/mortise bolts can be used incombination with strikeNOTE: handling of strike is based on latch bolt being installed below deadboltItem # Description5510.000 Dust box for use with 5510.xxx.TSTR strike (000 fi nish only) $5For use with T strike and Extended T strikeConceals installation marks and cutoutsStrikes NOT available in Distressed finishes, non-distressedequivalents 402=102, 412=112, 452=152

INTERIOR & ENTRANCE HARDWAREDUMMY SPINDLESDummy Spindles – RosettesHalfFullItem # Description5098.004.N Half Dummy Back Plate $85098.009.N Full Dummy Back Plate 85098.004.A Transitional Half Dummy Back Plate 135098.004.N – Half Dummy Spindle> Half dummy surface mounting for all current Estate knobs and levers> Rose threads onto adaptor> Included with roses ordered .IDM> If surface mounting is problematic (ie. hollow core doors) please order Rigid MountingSpindle (5084.xxx) – shown belowNOTE: 5098.004.A Transitional spindle for discontinued threaded knobs & levers,as well as all current Estate knobs and levers.5098.009.N – Full Dummy Adaptor> Rose threads onto adaptor> For all current Estate knobs and levers> Two adaptors included with roses ordered .FD>Spindle ordered separatelyDummy Spindles & Adaptors – EscutcheonHalfFullItem # Description Size5077.004 Half Dummy Spindle 1.5˝5091.004 Half Dummy Spindle 0.875˝ $135092.004 Half Dummy Spindle 1.125˝5099.004 Full Dummy Adaptor 1.175˝ 55077, 5091, 5092 – Half Dummy Spindle> For mounting all current Estate knobs and levers to Escutcheon plates> 5092 for most escutcheons> 5077 for thick escutcheons: .75˝ thick (eg. Hamilton & Tremont)> 5091 for thin escutcheons: .1˝ thick (eg. Boston, San Diego, etc.)5099.004 – Full Dummy Adaptor> For mounting escutcheons on Full Dummy applications (2 needed)> 1.175˝ diameter (30mm)> Spindle ordered separately5097.009.N – Active Trim Back Plate See SPARE PARTS, page 56.A SUFFIX TRANSITIONAL SPINDLES: (OLD STYLE):For use with all discontinued Estate threaded knobs & levers,as well as all current Estate knobs and leversTransitional Half Dummy Spindles – ESCUTCHEONItem # Description Size5077.004.A Half Dummy Spindle 1.5˝5091.004.A Half Dummy Spindle .875˝5092.004.A Half Dummy Spindle 1.125˝$13Half Dummy Rigid Mounting Closet SpindleHalf6748.xxx.ACloset6749.xxx.A030, 031033, 034, 040050, 060, 102190, 260, 264003, 055056, 402412, 452Item # DescriptionSpindleLengthDoorThickness5084.xxx.A Half Dummy Rigid Mounting 2.25˝ 1.375˝ $30 $356748.xxx.A Closet Spindle 3.375˝ 1.75˝45 506749.xxx.A Closet Spindle 2.625˝ 1.375˝5084.xxx – Half Dummy Rigid Mounting Spindle – ROSES> Optional mounting in place of 5098.004.N for a more secure mounting>Through-bolt application ideal for hollow core doors or where surfacemounting is not recommended6748-6749.xxx.A – Closet Spindle> For the inside of closets and low frequency use doors> Installation is identical to standard trim designs> For 2.125˝ pre-drilled doors, use 5081 closet spindle with 6502.009 adaptor,See Pre-drilled Doors AccessoriesCAUTION: Closet spindles are difficult to turn and should not be used where children,aged, or physically-handicapped people may lock themselves within a small space49

INTERIOR & ENTRANCE HARDWARESPINDLES0509 - 0516 Broached Straight Spindles – PASSAGEItem # Description Size0509.004 Broached straight 3˝0510.004 Broached straight 3.5˝0511.004 Broached straight 4˝0512.004 Broached straight 4.5˝0513.004 Broached straight 5˝0514.004 Broached straight 5.5˝0515.004 Broached straight 6˝0516.004 Broached straight 7˝$120509 - 0516 Broached Swivel Spindles – PRIVACYItem # Description Size0519.004 Broached swivel 3˝0520.004 Broached swivel 3.5˝0521.004 Broached swivel 4.5˝0522.004 Broached swivel 4˝0523.004 Broached swivel 5˝0524.004 Broached swivel 5.5˝0525.004 Broached swivel 6.5˝$160530 - 0533 Broached Half Spindles – FRONT DOOR(thumbpiece to knob or lever)Item # Description Size0530.004 Broached half 2.375˝0531.004 Broached half 2.875˝0532.004 Broached half 3.375˝0533.004 Broached half 2.25˝0539.004 Broached half 2.625˝$12> For mounting all current Estate knobs and levers to thumbpiece of handlesets> Included with all ‘set’ ordersSPINDLE CHART & KEYDoorThicknessLock TrimThicknessSpindle1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝HalfSpindle SpindleHalfSpindle SpindleHalfSpindle SpindleHalfSpindle SpindleHalfSpindleA – .0625˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝B – .0937˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝C – .125˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝D – .1875˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝ 5˝ 2.375˝E – .25˝Estate Roses3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5˝ 2.875˝F – .3125˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5˝ 2.375˝ 5˝ 2.875˝G – .375˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5.5˝ 2.875˝ 5.5˝ 2.875˝H – .435˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝ 5˝ 2.375˝ 5.5˝ 2.625˝ 5.5˝ 2.875˝I – .56˝ 5˝ 2.25˝ 5˝ 2.375˝ 5.5˝ 2.625˝ 6˝ 2.625˝ 6˝ 2.875˝J – .75˝ 5˝ 2.625˝ 5.5˝ 2.875˝ 5.5˝ 2.875˝ 6˝ 2.875˝ 6˝ 2.875˝.A SUFFIX TRANSITIONAL SPINDLES (OLD STYLE):For use with all discontinued Estate threaded knobs & levers,as well as all current Estate knobs and leversTransitional Straight Spindles – PassageItem # Description Size0509.004.A Transitional straight 3˝0510.004.A Transitional straight 3.5˝0511.004.A Transitional straight 4˝0512.004.A Transitional straight 4.5˝0513.004.A Transitional straight 5˝0514.004.A Transitional straight 5.5˝0515.004.A Transitional straight 6˝0516.004.A Transitional straight 7˝Transitional Swivel Spindles – PrivacyItem # Description Size0519.004.A Transitional swivel 3˝0520.004.A Transitional swivel 3.5˝0521.004.A Transitional swivel 4.5˝0522.004.A Transitional swivel 4˝0524.004.A Transitional swivel 5˝0525.004.A Transitional swivel 6.5˝Transitional Half Spindles – Front Door (thumbpiece to knob or lever)Item # Description Size0530.004.A Transitional half 2.375˝0531.004.A Transitional half 2.875˝0532.004.A Transitional half 3.375˝0533.004.A Transitional half 2.25˝$17$21$17

INTERIOR & ENTRANCE HARDWAREPRIVACY MORTISE BOLTSMortise Bolt, Tubular Design0413Item # Description Backset Wt.0413.xxx Contemporary Mortise Bolt 2.75˝0414.xxx Traditional Mortise Bolt 2.75˝0.60418.xxx Contemporary Mortise Bolt 2.375˝0419.xxx Traditional Mortise Bolt 2.375˝0.5030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$75 $800413.xxx – 2.75˝ Backset Mortise Bolt0418.xxx – 2.375˝ Backset Mortise Bolt> Heavy duty solid brass mortise bolt with steel housing> Smooth and positive action> Use with tubular latches for privacy/patio condition> May be installed above or below latches, depending upon visibility> Emergency release trim available at additional charge> Available Less Turn Piece (.LTP) – see next page to select a Turn PieceIMPORTANT: To enable emergency trim to function, the turn piece spindle must be cut to extendno farther than halfway through the boltPACKED: One in a box with necessary fasteners and templateFSE: BHMA Designation: LO412104190414.xxx – 2.75˝ Backset Mortise Bolt0419.xxx – 2.375˝ Backset Mortise Bolt0413 & 0418.LTPLess Turn PieceOrder Turn Piece separately (next page)030, 031033, 034, 040Item # Description Backset Wt.050, 060, 102112, 150, 151190, 260, 2640030550560413.xxx.LTP Mortise Bolt – Less Turn Piece 2.75˝0418.xxx.LTP Mortise Bolt – Less Turn Piece 2.375˝0.4 $30 $35Mortise Bolts .LTP not available in Distressed finishes, non-distressed equivalents:402=102, 412=112, 452=152*51

INTERIOR & ENTRANCE HARDWARETURN PIECES | BACKPLATESTurn Pieces w/ Backplates67286732Item #6728.xxxDescription030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526732.xxx6734.xxx6750.xxx6751.xxx6756.xxx6764.xxxTurn Piece(Will accommodate doors up to 2.25˝)$65 $70For doors thicker than 2.25” order turn pieces as .EXT. 75 806728-6764.xxx – Turn Piece w/ Backplates> For interior & exterior mortise locks, tubular bolts and sectional trim6733.xxx67336733S 6733S.xxx* **6760.xxx6760S.xxx6762.xxxTurn Piece(Will accommodate doors up to 3˝)$65 $70For doors thicker than 3” order turn pieces as .EXT. 75 80 *6733S & 6760S Stainless Steel – Tier 1 finishes: 320 & 324*6733S & 6760S Stainless Steel NOT available in Tier 2 finishes** 6733S is NOT available as EXT.Baldwin Stainless Steel products crafted with Grade 304 Stainless Steel6734675067606760S 6751 6762 6756 6764

INTERIOR & ENTRANCE HARDWARETURN KNOBSTurn Knobs6720Turn Knob for 67506721Turn Knobs for 6751 & 67566725Turn Knob for 67326727Turn Knob for 6732MatchingItem # DescriptionTurn Piece6720.xxx Turn Knob 67506721.xxx Turn Knob 6751 & 67566722.xxx Turn Knob 67286724.xxx Turn Knob 6764 & 67106725.xxx Turn Knob 67326727.xxx Turn Knob 67346729.xxx Turn Knob 6709 & 6714030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 2646720-6729.xxx – Turn Knobs> For interior & Exterior Trim trim orcombined with ER trim to create a custom Turn Piece> For doors up to 2.25˝ thick> For doors thicker than 2.25˝, order .EXT – Extended Turn Knob eg. 6720.xxx.EXT>10% up charge for assembly of non-standard turn knobs on escutcheon plates.003, 055056, 402412, 452$35 $406722Turn Knob for 67286729Turn Knob for 6709 & 67146724Turn Knobs for 6764 & 6710 67356735STurn Knob for 6733, 6733S6760, 6760S, 67626735.xxx # Turn Knob 6733, 6760, 67626735S.xxx* # Turn Knob 6733S, 6760STK001.xxx Turn Knob$35 $40TK002.xxx Turn KnobTK003.xxx Turn Knob35 40TK004.xxx Turn KnobTK005.xxx Turn KnobTurn Knobs above .EXT (for doors thicker than 2.25˝) 40 45*6735S Stainless Steel – Tier 1 finishes: 320, 324*6735S Stainless Steel not available in Tier 2 finishes#6735 & 6735S Turn Knobs will fit up to 3˝ thick door (.EXT not needed/available)TK0011.6˝.3˝1˝1˝TK0021.8˝.4˝1.4˝.5˝1˝TK0031.5˝.7˝1.1˝.4˝TK004 1.1˝1.4˝.5˝.3˝.9˝.9˝TK005.7˝1.7˝1.4˝TK0051˝53

INTERIOR & ENTRANCE HARDWAREEMERGENCY RELEASE (ER) TRIM/BACKPLATETrim & Key SetAll Trim sets come with Emergency Release Key0403040404050406Item #0403.xxx0404.xxx0405.xxx0406.xxx0407.xxx0415.xxx0416.xxx0421.xxx0421S.xxx*0422.xxx0423.xxxDescriptionEmergency Release Trim & 0417 Key w/ 6701 CoverEmergency Release Trim & 0417 Key w/ 6701 CoverEmergency Release Trim & 0417 Key w/ 6701 CoverColonial Emergency Release Trim & KeyEmergency Release Trim & 0417 Key w/ 6701 CoverEmergency Release Trim & 0417 Key w/ 6701 CoverEmergency Release Trim & 0417 Key w/ 6701 CoverContemporary Round Emergency Release Trim& 0417 Key w/ 6701 Cover (Stainless Steel)Contemporary Round Emergency Release Trim& 0417 Key w/ 6701 Cover (Stainless Steel)Lakeshore Emergency Release Trim& 0417 Key w/6701 Cover2˝ x 2˝ Square Emergency Release Trim& 0417 Key w/6701 Cover030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$40 $45$40 $450423S.xxx*2˝ x 2˝ Square Emergency Release Trim& 0417 Key w/6701 Cover0417.022 Emergency Release Key – Steel Finish 022 only 65174.022Emergency Key Supplied w/5500 Series PrivacyLatches - SteelFinish 022 only 66701.xxx Emergency Release Cover 10 15Emergency Key – Bit Key (Solid brass key for mortise6703.xxxbolts and privacy function mortise locks)*0421S & 0423S Stainless Steel – Tier 1 finishes: 320, 324*0421S & 0423S Stainless Steel not available in Tier 2 finishesBaldwin Stainless Steel products crafted with Grade 304 Stainless Steel35 356701.xxx – Emergency Release CoverFEATURES: Pressure applied coverConceals emergency release opening on privacy lock function.Designed for use with escutcheon or emergency release trim.0407 0417.02204230423S2.00≤(50.8mm)2.00≤(50.8mm)0.38≤(9.5mm)041504210421S1.75≤(44.5mm)6701Emergency Release Cover0.38≤(9.5mm)0416 04221.90≤(48.3mm)6703.xxxEmergency Bit Key1.90≤(48.3mm)0.38≤(9.5mm)IMPORTANT: To enable emergency trim tofunction, the turn piece must be cut to extendno farther than halfway through the bolt.

INTERIOR & ENTRANCE HARDWARE2.125˝ PRE-DRILLED DOOR ACCESSORIES | SPARE PARTS6502.0092.125˝ Pre-Drilled Door AdaptorItem # Description6502.009 2.125˝ Pre-drilled door adaptor $10> Retrofits all 2.125˝ pre-bored doors allowing for Estate knob/lever installation> Works with full dummy, passage and privacy functions> Must use 2.625˝ or larger diameter rose/escutcheon to cover adaptorNOTE: This adaptor MUST be used if doors are pre-drilled5090.020.ADummy Insert & Filler PlateItem # Description5090.020.A Dummy insert & filler plate $18> Used with 6502.009 adaptor to enable full dummy mounting> Conceals face plate cut-out in edge of door5081 & 5082Closet Spindles – Pre-drilled Doors5081Spindle DoorItem # Descriptionlength thickness5081.xxx.A Closet Spindle 2.625˝ 1.375˝5082.xxx.A Closet Spindle 3.375˝ 1.75˝030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$45 $505082> For the inside of closets and low frequency use doors> Mounts with 6502.009 Adaptor for pre-bored doors onlyCAUTION: Closet spindles are difficult to turn and should not be used where children,aged, or physically-handicapped people may lock themselves within a small spaceScrew CoversSpecially designed to conceal the screw head01291.0˝01751.0˝Item #0129.xxx0175.xxxDescriptionColonial Screw CoverContemporary Screw Cover030, 031, 033034, 040, 050060, 102, 112150, 151, 152190, 260, 264003, 055056, 402412, 452$14 $18Screw BasesRectangular & Lakeshore01741.5˝01761.0˝Item #0174.xxx0176.xxxDescriptionRectangular Screw BaseLakeshore Screw Base030, 031, 033034, 040, 050060, 102, 112150, 151, 152190, 260, 264003, 055056, 402412, 452$27 $311.25˝0.375˝1.0˝0.25˝0174.xxx – Rectangular Screw Base> Specially designed screw base0176.xxx – Lakeshore Screw Base> Specially designed screw cover conceals the screw head55

INTERIOR & ENTRANCE HARDWARESPARE PARTS | INSTALLATION TOOLSSpare Parts1327.009Set Screws5097.009.NActive Trim Back Plate5084.009.0002Dummy Trim Plate5085.000Graphite Impregnated Nylon Spacer.765˝Item # Description Price1327.009 Set Screws $15084.009.0002 Dummy Trim Plate 25085.000 Graphite Impregnated Nylon Spacer 15097.009.N Active Trim Back Plate (each) 81327.009 – Set Screws> Included with ALL Estate knobs and levers> 0.25˝ Black Oxide5084.009.0002 – Dummy Trim Plate> This plate can be ordered separately to convert other finishesof screw covers to a rigid mounting installation.5097.009.N – Active Trim Back Plate> For use with ALL Estate active roses5085.000 – Graphite Impregnated Nylon Spacer> Included with all Privacy rosettes> Eliminates end play of trim and assures smooth operationRose Retainers5197.xxx5194.xxx.AItem # Description Price5197.xxx Rose Retainer$35194.xxx.A Rose Retainer Small Shank5197.xxx – Rose Retainer> Rose Retainers furnished standard with all roses.> Finishes:· 000 for 003, 030, 031, 033, 050, 060, 040· 190 for 102, 112, 151, 190, 402, 412, 452· 264 for 260, 264, 150, 140, 055, 0565494.xxx.A – Rose Retainer Small Shank> Only available in finishes 019, 140, 150, 151, 190, 221Installation Tools5198.000.ASpanner Tool8480.000Aligning Tool & Bushing8474.000Aligning Bushing8481.000.001Socket WrenchItem # Description Price5198.000.A Spanner Tool $38474.000 Aligning Bushing (box of 50) 158480.000 Aligning Tool & Bushing 128481.000.001 Socket Wrench 85198.000.A – Spanner Tool> One Spanner Tool furnished standard with all roses/except.8474.000 – Aligning Bushing> Box of 508480.000 – Aligning Tool & Bushing> For use in proper alignment of knobs/levers and roses with mortise locks and tubular latches.8481.000.001 – Socket Wrench> For all knob and lever installations

INTERIOR & ENTRANCE HARDWARETUBULAR LATCH INSTALLATION W/ALIGNING BUSHINGDrill .75˝ hole.* NOTE: IN SEPARATE MOUNTING APPLICATIONS,THE MINIMUM DISTANCE BETWEEN CENTER OFBOLTS IS 2.75˝.*This minimum distance is required to allow forproper clearance between latch bolt and mortise boltstrikes (T-Strikes).NOTE: Mortise bolt may be installed above or belowtubular latch, depending upon visibility.8474.000Alignment BushingDrill .625˝ hole.5097.000.NBack PlateUse of 8474.000 Aligning Bushing will facilitate installation of trim.Trim must be in alignment with latch and spindle to prevent binding.A. Install latch and strike per template instructions.B. Insert spindle through latch.C. Position 5097.009 Back Plates over spindle and insert 8474.000 Alignment Bushings.D. Center mark and install screws into back plates and remove 8474.000 Alignment Bushings.E. Install trim.MORTISE BOLT INSTALLATIONWhen installing mortise bolts, ALWAYS check width of Emergency Release Trim before drilling face bore. Standard bore is .625˝ (16mm) completely through door. Emergency Release Trim0406 and 0407 require a .5˝ (13mm) bore on outside face of door; a .625˝ (16mm) bore on inside face of door.IMPORTANT: When Emergency Release Trim is used, the turn piece spindle must be cut to extend no farther than halfway through the bolt.57

SECTIONAL TRIMS FOREUROPEAN MORTISE LOCKSCOMING SOON 2013Baldwin Estate now offers homeowners the ultimatein design inspiration for Euro-Mortise mechanics.Bring your vision to life by choosing a lever, andcomplement with a Rosette. The mechanics withinthe rosette will ensure the luxurious feel and longlasting quality of Baldwin hardware.• European Mortise Locks are most common outside North Americaand typically use a profi le cylinder installed below the lever.• Baldwin does not manufacture European Mortise Locks. However,Baldwin’s Sectional Trim for European Mortise Locks are compatiblewith 58mm, 72mm, and 85mm locks using an 8mm square spindle.• European Mortise Trims are distinguished with an “E” afterthe style number (example 5162E.xxx.MR).• European Mortise Rosettes contain a spring cartridge toassist operation with Baldwin’s heavy brass levers.• European Mortise Levers are laser engraved with the Baldwin brand name.SpecificationS> Meets EN 1906 as 47-0030A, as described below:Durability: Grade 7> 200,000+ cycles (Highest cycle rating under the European code)Category of Use: Grade 4> High frequency of use on door which are subject to frequent violent usageCorrosion Resistance grade: Grade 3> High resistance

EUROPEAN MORTISE SECTIONAL TRIMSHOW TO ORDERORDERING & INSTALLATIONPassage w/ Rosette InstallationEuropean MortiseHOW TO ORDERWHAT YOU NEED:PART #EXAMPLEPAGE#Lever – pairMinus Rose (.MR)5162E.150.MRPassage Rose – pair5056E.150.PSSpindle 0580E.004 61INSTALLATIONA. Use cartridges to mark holes onboth sides of the door.B. Drill holes.C. Install cartridges with supplied screws.D. Install spindle and roses. Secureroses with set screws.E. Install levers on both sides of the doorand secure with set screws.IMPORTANT: Set screw is coated with a special epoxy(resin) to prohibit the screw from loosening over time.NOTE: Lock provided by othersPrivacy or Entrance with Rosette InstallationEuropean MortiseHOW TO ORDERWHAT YOU NEED:PART #EXAMPLEPAGE#Lever – pairMinus Rose (.MR)5162E.150.MRPassage Rose – pair5056E.150.PSSpindle 0580E.004 61Cylinder Collar – pair 5056E.150.KCINSTALLATIONA. Use cartridges to mark holes onboth sides of the door.B. Drill holes.C. Install cartridges with supplied screws.D. Install lever spindle.E. Install roses.F. Insert cylinder and secure with mortise screw.G. Tighten rose set screws.H. Install levers on both sides of the doorand secure with set screws.IMPORTANT: Set screw is coated with a special epoxy(resin) to prohibit the screw from loosening over time.NOTE: Lock and cylinder provided by othersSpare Parts1327.009Set Screws for Levers8488E.000.AAdapter for Cylinder Collar8488E.000.BSet Screws for Rosettes8488E.000.CSpring Assistant Cartridge for .PS RosetteItem # Description Price1327.009 Set Screws for Levers $18488E.000.A Adapter for Cylinder Collar $88488E.000.B Set Screws for Rosettes $18488E.000.C Spring Assistant Cartridge for .PS Rosette $128488E.000.D Fasteners for Adapter / Cartridge $11327.009 – Set Screws for Levers> Included with ALL Estate knobs and levers> 0.25˝ Black Oxide8488E.000.A – Adapter for Cylinder Collar> Included with all European Mortise cylinder collars8488E.000.C – Spring Assistant Cartridge for .PS Rosette> Included with all European Mortise passage rosettes8488E.000.B – Set Screws for Rosettes> Included with all European Mortise rosettes8488E.000.D – Fastener for Adapter / Cartridge> Included with all European Mortise rosettes*Please refer to Baldwin Estat59

EUROPEAN MORTISE SECTIONAL TRIMSSOLID BRASS LEVERS5104E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025104E.xxx.MR Minus Rose - pair 1.5 $145 $1655104E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.8 $73 $835107E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025107E.xxx.MR Minus Rose - pair $145 $1655107E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.6 $73 $835122E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025122E.xxx.MR Minus Rose - pair 1.6 $145 $1655122E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.8 $73 $835152E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025152E.xxx.MR Minus Rose - pair 1.1 $145 $1655152E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.6 $73 $835190E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025190E.xxx.MR Minus Rose - pair 1.5 $145 $1655190E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.8 $73 $83All Baldwin levers are ADA 4.13.9 Compliant

EUROPEAN MORTISE SECTIONAL TRIMSSOLID BRASS LEVERS5162E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025162E.xxx.MR Minus Rose - pair 1.8 $145 $1655162E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 0.9 $73 $835166E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025166E.xxx.MR Minus Rose - pair 2.2 $145 $1655166E.xxx.RMR (LMR) Right (Left) Minus Rose - half pair 1.1 $73 $83SPINDLE CHARTDOOR THICKNESS 45mm 50mm 55mm 60mmSPINDLEEUROPEAN ROSETTES 105mm 105mm 110mm 115mm0580E - 0582E Broached Straight Spindles - 8mm SquareItem # Description Size0580E.004 Broached straight 8mm 105mm0581E.004 Broached straight 8mm 110mm $120582E.004 Broached straight 8mm 115mm61All Baldwin levers are ADA 4.13.9 Compliant

EUROPEAN MORTISE SECTIONAL TRIMSSOLID BRASS ROSETTES5016E Passage Rosetteshown w/ 5104E Lever Item # Description Wt.040, 050112, 150, 151, 003, 055,260, 264 056, 4025016E.xxx.PS Passage - Pair 0.8 $50 $605016E.xxx.IPS Passage - Half Pair 0.4 $25 $30NOTE: Lever must be ordered separately5017E Passage Rosetteshown w/ 5122E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025017E.xxx.PS Passage - Pair 0.6 $50 $605017E.xxx.IPS Passage - Half Pair 0.3 $25 $30NOTE: Lever must be ordered separately5027E Passage Rosetteshown w/ 5104E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025027E.xxx.PS Passage - Pair 0.6 $50 $605027E.xxx.IPS Passage - Half Pair 0.3 $25 $30NOTE: Lever must be ordered separately5032E Passage Rosetteshown w/ 5166E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025032E.xxx.PS Passage - Pair 0.6 $50 $605032E.xxx.IPS Passage - Half Pair 0.3 $25 $30NOTE: Lever must be ordered separately5056E Passage Rosetteshown w/ 5166E Lever040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025056E.xxx.PS Passage - Pair 0.7 $50 $605056E.xxx.IPS Passage - Half Pair 0.4 $25 $30NOTE: Lever must be ordered separately

EUROPEAN MORTISE SECTIONAL TRIMSSOLID BRASS CYLINDER COLLARS5016E Cylinder Collar040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025016E.xxx.KC Cylinder Collar - Pair 0.8 $50 $605016E.xxx.IKC Cylinder Collar - Half Pair 0.4 $25 $30NOTE: Cylinder not included5017E Cylinder Collar040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025017E.xxx.KC Cylinder Collar - Pair 0.6 $50 $605017E.xxx.IKC Cylinder Collar - Half Pair 0.3 $25 $30NOTE: Cylinder not included5027E Cylinder Collar040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025027E.xxx.KC Cylinder Collar - Pair 0.6 $50 $605027E.xxx.IKC Cylinder Collar - Half Pair 0.3 $25 $30NOTE: Cylinder not included5032E Cylinder Collar040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025032E.xxx.KC Cylinder Collar - Pair 0.6 $50 $605032E.xxx.IKC Cylinder Collar - Half Pair 0.3 $25 $30NOTE: Cylinder not included5056E Cylinder Collar040, 050112, 150, 151, 003, 055,Item # Description Wt. 260, 264 056, 4025056E.xxx.KC Cylinder Collar - Pair 0.7 $50 $605056E.xxx.IKC Cylinder Collar - Half Pair 0.4 $25 $30NOTE: Cylinder not included63

COMMUNICATING DOORS— HOSPITALITY —• Communicating Door Kit: For use in conjunction with Baldwin patio deadboltIncludes: swivel spindle, rose and screw cover for oppsite side of Communicating Door• Function: Security between (hotel) rooms with limited space between doors• Communicating door side compatible with any LARGE thread-on rose style (5048 rose included)• Immediate availability in standard Estate finishesCommonly found between two hotel rooms where a functionallatch is still required, and limited space between doors does notallow for trim to be installed on exterior sides.Security between rooms is accomplished with a standard patiodead bolt. Latch & trim offer normal passage functionality oninterior, while completing the aesthetic requirement of a completetrim set on the door.Door kits include all components needed to completecommunicating door installation:> Estate 5048 thread-on passage rose and 0129 screw cover> Components 1 – 6 shown below> Kits designed to work with standard communicating doorthickness of 1.75”1) 0529.028.T5212 Swivel Spindle Assembly2) 5048.150.05102 Rose3) 8480.800.00015 Alignment Bushing4) 0129.039.00025 Back Plate5) 1141.028.00009 10-32 X 1/2 Bolt6) 0129.150.00015 Colonial Screw CoverLIST PRICINGSKU Tier 1 Tier 25187.xxx $68 $73

ENTRANCE TRIMSYMBOLOGYEntrance TrimSymbologyInsideInsideInsideOutsideENTRANCE(ENTR)OutsideENTRANCE*DOUBLE CYLINDER(DBLC)Outside Outside InsideFULL DUMMY(FD)BACK TO BACK(BB75)*WARNING: Double cylinder functionson any application used for Egressmay present a safety hazard in times ofemergency. Installation should be inaccordance with local codes.Outside InsideENTRANCE(ENTR)Outside InsideENTRANCE*DOUBLE CYLINDER(DBLC)OutsideInsideFULL DUMMY(FD)MORTISEMPM TMULTI-POINTTUBULARWatch for this icon as your quick guideto coordinating Baldwin lock hardwarethroughout your home. Your favoriteBaldwin styles can be available in Tubular,Mortise, or Multi-Point.This symbol signifies that theillustrated lock trim will cover mostsingle tubular cut-outs when usedwith appropriate backset mortiselock. Individual conditions should beexamined to confirm acceptability.Escutcheon Plate ConfigurationsOrdered in half pairs except for privacy (.KP) cut-outs which are ordered in pairs..KN.KC.KT.KE.KPENTRANCE(KNOB HOLE)ENTRANCE(KNOB ANDCYLINDER HOLE)PRIVACY(KNOB AND TURNPIECE ATTACHED)EMERGENCY RELEASE(KNOB AND ER HOLE)PRIVACY PIN*(KNOB AND PRIVACY PIN HOLE)*NOT AVAILABLE ON ALL ESCUTCHEONS65

ENTRANCE TRIMTERMINOLOGYTerminologyAll the codes used in Entrance TrimESCUTCHEON TRIMSFunctionCode Description.ENTR Active Entrance Trim – Knobs, Levers.RENT Right-handed Active Handleset – Levers.LENT Left-handed Active Handleset – Levers.DBLC Double Cylinder Active Entrance Trim.FD Full Dummy Trim.RFD Right-Handed Full Dummy.LFD Left-Handed Full Dummy.BB75 Back to Back Entrance Trims 1 ¾” Doors.BB30 Back to Back Entrance Trims up to 3” Doors.BBFD Back to Back Full Dummy.KC Knob and Cylinder Hole.KT Knob and Turn Piece Attached.KN Knob Hole.KP Knob and Privacy Button Hole (only sold in Pairs).KE Knob and Emergency Release Hole.KCIS Cut for Cylinder Inside*.KEIS Cut for Emergency Release Inside*.KNIS Cut for Knob Inside*.KTIS Cut for Turn Piece Inside*.KCOS Cut for Cylinder Outside **.KEOS Cut for Emergency Release Outside**.KNOS Cut for Knob Outside**.KTOS Cut for Turn Piece Outside**MORTISE LOCKSFunctionCode Description.R Right-handed Mortise Lock (Knobs).L Left -handed Mortise Lock (Knobs).RLS Right-handed Mortise Lock Lever Strength(Levers).LLS Left-handed Mortise Lock Lever Strength (Levers).RR Right-handed Reverse Bevel Mortise Lock (Knobs).LR Left-handed Reverse Bevel Mortise Lock (Knobs).RRLS Right-handed Reverse Bevel Mortise Lock LeverStrength (Levers).LRLS Left-handed Reverse Bevel Mortise Lock LeverStrength (Levers).LRB1 Right-handed Reverse Bevel Mortise Lock LeverStrength (Levers) w/ 1˝ Front.RRB1 Left-handed Reverse Bevel Mortise Lock LeverStrength (Levers) w/ 1˝ Front*Surface Mounted Thru-Bolt** Thru-Bolted (No Surface Screws)Pre-Drilled DoorsThis symbol signifies that the illustratedlock trim will cover most single tubular cutoutswhen used with appropriate backsetmortise lock. Individual conditions shouldbe examined to confirm acceptability.(1) Single TubularCut-out

ENTRANCE TRIMTUBULARSpecifications & Standards of ExcellenceEstate lock sets are featured in traditional styles in our most popular fi nishes. Interior latch set designs coordinate beautifully with lockset styles to enable customers to carrya specific design theme throughout the home. Each Estate lockset is packed as a complete set, and is also available by component.5201Item Qty Part No. Part Name1 1 6420.xxx.00052 Cylinder Collar2 1 6420.xxx.00012 Large Plate3 1 6420.xxx.00022 Small Plate4 1 2598.xxx.00013 Door Pull5 1 5300.xxx.95115 Thumbpiece6 1 6420.xxx.KT012 Inside Escutcheon7 1 5350.xxx.00023 Turn Knob8 1 5064.xxx.00013 Knob-rope9 1 0129.xxx.00013 Screw Cover10 1 5300.000.05205 Fastener Packet (Pull/knob)11 1 5300.228.97085 Alignment Bracket12 2 1704.039.00115 Threaded Adaptor13 1 6747.xxx.00013 Thimble14 1 1005.xxx.05105 Fastener Packet (Inside Plate)15 1 5196.109.00005 Wave Washer16 1 8053.509.00015 Plate-tailpiece17 2 1117.509.00009 #3-48 X .313˝ Lg., Fh, Ph, M/s18 1 5300.000.93505 Fastener Packet (Egress Cartridge)19 1 5300.000.95505 Rectangular Egress Cartridge Assembly20 1 8031.xxx.05255 Cylinder Assembly21 1 5300.000.93205 Spindle/spacer Packet22 1 5300.028.99055 Mounting Post23 2 10009.329.00009 #6-32 X .44˝ Lg., Fh, Ph, M/s24 1 5300.000.95995 Thumb Cartridge AssemblyNot Shown On Drawing25 1 5300.xxx.95105 Latch Assembly With Faceplate26 1 8000.xxx.STR15 Strike27 2 8000.1849.STR35 Dust Box28 1 8053.xxx.00032 Cylinder Cap29 1 8208.xxx.DBC15 Deadbolt Assembly (Egress)30 1 8510.xxx.01135 T-strike31 1 1013.221.05275 Fastener Packet (Strike)32 1 1421.028.05105 Fastener Packet (Strike)33 1 2510.221.00009 Fastener Packet (Latch And Deadbolt)34 1 Pk.6415 Installation Instructions35 1 Pk.1082 Estate Strike Marking Template36 1 Pk.1215 Estate Marking Template37 1 Pk.1149T Lifetime Limited Finish/mechanical WarrantyMechanical Features - Escutcheon Trim Lock sets> SOLID FORGED BRASS: Entrance handle, escutcheon,knob, rose and turn piece are manufactured of solidforged brass for maximum Strength and durability.> INSTALLATION: Lock sets are designed for easy installation instandard pre-bored wood or metal doors. The adaptor aligns thelatch with the trim. Graphic instructions make installation FAST!> FULLY REVERSIBLE: Accommodates all doorconditions and facilitates installation.> DOOR THICKNESS: Lock sets accommodate a door thicknessof 1.75˝ (44mm). Conversion kit available for 2.0˝ (51mm)and 2.25˝ (57mm) thick doors (see price list for details).> CASE: Deadbolt and latch case are formed of steel for Strength.Most interior working parts are made of solid brass or zinc chromateplated steel for maximum Strength and smooth operation.> BACKSET: Adjustable backset 2.375˝ (60mm), 2.75˝(70mm) latch and deadbolt supplied standard.> FACE PLATE: Deadbolt and latch supplied with a 1˝ (25mm) face plate.> STRIKE: Deadbolt is furnished with a specially designed reinforcingstrike constructed of high grade steel for ultimate Strength anddurability. The strike is installed with two (2) 3˝ (76mm) securityjamb screws and a dust box. The security strike is covered with anarmored front to conceal the fasteners. Latches are supplied standardwith a box strike (other strikes are available at an additional charge).> DISTANCE BETWEEN CENTER OF LATCH ANDDEADBOLT (CTC): Lockset accommodates 5.5˝(140mm) center to center dimension ONLY.> BOLT: Deadbolt and latch bolt constructed of solid brass.Deadbolt has 1˝ (25mm) throw when extended and a hardenedsteel insert for maximum protection and security. Latch bolt has a.5˝ (13mm) throw when extended to fully engage the door jamb.> CYLINDER: Cylinder supplied with 5-pin keying.> KEYS: Designed with a 1.25˝ (32mm) wide bow surfaceto facilitate use by physically challenged people.> Numerous patents, copyrights, and trademarks are heldby the Corporation to protect the integrity and reputationof our distinctive line of hardware appointments.2419114212232221186142117161572118313101091410867

ENTR ANCE SETSTUBULARSpecifications and StandardsALL ENTRANCE LOCK SETS:SOLID FORGED BRASS: Entrance handle, cylinder collar, knob, rose and turn piece are manufacturedof solid forged brass for maximum strength and durability.INSTALLATION: Estate lock sets are designed for easy installation in standard pre-bored wood ormetal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation FAST!DOOR THICKNESS: Lock sets accommodate a door thickness of 1-3/4˝ (44mm). Conversion kitavailable for 2˝ (51mm) and 2-1/4˝ (57mm) thick doors at an additional charge.CASE: Deadbolt and latch case are formed of steel for strength. Most interior working parts are madeof solid brass or steel for maximum strength and smooth operation.BACKSET: Adjustable backset 2-3/8˝ (60mm) or 2-3/4˝ (70mm) latch and deadbolt suppliedstandard.FACE PLATE: Deadbolt and latch supplied with a 1˝ (25mm) face plate.STRIKE: Deadbolt is furnished with a specially designed reinforcing strike constructed of high gradesteel for ultimate strength and durability. The strike is installed with two (2) 3˝ (76mm) security jambscrews and a dust box. The security strike is covered with an armored front to conceal the fasteners.The 3˝ screws securing the inside face of the double cylinder deadbolt resist tampering and guardagainst theft. Latches are supplied standard with a full lip strike (other strikes are available at anadditional charge.)BOLT: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1˝ (25mm) throw whenextended and a hardened steel insert for maximum protection and security. Latch bolt has a .5˝(13mm) throw when extended to fully engage the door jamb.KEYS: Designed with a 1-1/4˝ (32mm) wide bow surface.PACKAGING: All products are packaged in contractor packaging unless noted.SECTIONAL TRIM LOCK SETS:FULLY REVERSIBLE: Accommodates most door conditions and facilitates installation.DOOR THICKNESS: Lock sets accommodate a door thickness of 1-3/4˝ (44mm). Conversion kitavailable for 2˝ (51mm) and 2-1/4˝ (57mm) thick doors at an additional charge.DISTANCE BETWEEN CENTER OF LATCH AND DEADBOLT (CTC): Lockset accommodates anycenter-to-center dimension greater than 4-3/8˝ (111mm).CYLINDER: Cylinder supplied with 5-pin keying. Cylinder is protected with a free-turning cylinderguard to resist gripping or twisting.DOOR PREP: Designed to fit 2-1/8˝ face bore with no additional hardware.ESCUTCHEON TRIM LOCK SETS:FULLY REVERSIBLE: Accommodates most door conditions and facilitates installation.DOOR THICKNESS: Lock sets accommodate a door thickness of 1-3/4˝(44mm). conversion kit available for 2˝ (51mm) and 2-1/4˝ (57mm)thick doors at an additional charge (see price list for details).DISTANCE BETWEEN CENTER OF LATCH AND DEADBOLT(CTC): Locksetaccomodates a 5 1/2˝ (140mm) center-to-center dimension ONLY.CYLINDER: Cylinder supplied with 5-pin keying.EMERGENCY EGRESS TUBULAR ENTRANCE LOCK SETS:EMERGENCY EGRESS: Handleset which retracts the latchbolt and deadbolt simultaneouslywhen the inside knob/lever is turned. Door will remain unlocked unless locked with a key.CARTRIDGE: Case and interior working parts are formed of heavy gauge steel, zincchromate plated and lubricated for maximum strength and smooth operation.FULLY REVERSIBLE: Accommodates most door conditions and facilitates installation.DOOR THICKNESS: Lock sets accommodate a door thickness of 1-3/4˝ (44mm). Conversion kitavailable for 2˝ (51mm) and 2-1/4˝ (57mm) thick doors at an additional charge.DISTANCE BETWEEN CENTER OF LATCH AND DEADBOLT (CTC): Lockset accommodates 5 1/2˝center-to-center dimension ONLY.CYLINDER: Cylinder supplied with 5-pin keying.IMPORTANT: Emergency egress entrance lock sets aredesigned for use with all Estate knobs or levers.TWO-POINT LOCK SETS:DOOR THICKNESS: Lock sets accommodate a door thickness of 1-3/4˝(44mm)to 2˝ (51mm). Cannot be installed on doors thicker than 2˝(51mm).DISTANCE BETWEEN CENTER OF LATCH AND DEADBOLT (CTC): Locksetaccommodates any center-to-center dimension greater than 4-3/4˝ (121mm).CYLINDER: Cylinder supplied with 5-pin keying. Cylinder is protectedwith a free-turning cylinder guard to resist gripping or twisting.DOOR PREP: Designed to fit 2-1/8˝ face bore with a 3-hole prep.NOTE: When installing a two-point handleset on a door prepped for a standard single point handlesetwith a 5 1/2˝ CTC boring, the location of the thumb piece will be approximately 2 1/2˝ lower.Numerous patents, copyrights, and trademarks are held by the Corporation to protect the integrityand reputation of our distinctive line of hardware appointments.Functions AvailableENTRANCE DOUBLE CYLINDER FULL DUMMYFROM EXTERIOR:Thumb piece operates handleset latch;key operates deadbolt.FROM INTERIOR:Knob operates latch;key operates deadbolt.FROM EXTERIOR:Thumb piece operates handleset latch;key operates deadbolt.FROM INTERIOR:Knob operates latch;key operates deadbolt.Trim for non-working side of doubledoors. Matching dummy trim(non-functioning) handleset andinterior trim.

ENTR ANCE SETS, TUBULARSECTIONALCanterbury Sectional Trimw/ 5020 Colonial knob or 5455V Wave leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285305.xxx.ENTR Single cylinder handleset with interior knob 5.8 $425 $50085305.xxx.DBLC Double cylinder handleset with interior knob 6.1 455 53085305.xxx.FD Full dummy set with interior knob 4.6 365 44085305.xxx.RENT Single cylinder handleset with lever – RH Entry85305.xxx.LENT Single cylinder handleset with lever – LH Entry6.8 425 50085305.xxx.RDBL Double cylinder handleset with lever – RH Entry85305.xxx.LDBL Double cylinder handleset with lever – LH Entry7.1 455 53085305.xxx.RFD Full dummy set with lever – RH Dummy85305.xxx.LFD Full dummy set with lever – LH Dummy5.6 365 440.ENTRChooseKnob or Leverfor interior.LENT or .RENTMadison ® Sectional Trimw/ 5015 Classic knob or 5445V Classic leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285320.xxx.ENTR Single cylinder handleset with interior knob 5.6 $425 $50085320.xxx.DBLC Double cylinder handleset with interior knob 5.9 455 53085320.xxx.FD Full dummy set with interior knob 4.2 365 44085320.xxx.RENT Single cylinder handleset with lever – RH Entry85320.xxx.LENT Single cylinder handleset with lever – LH Entry6.6 425 50085320.xxx.RDBL Double cylinder handleset with lever – RH Entry85320.xxx.LDBL Double cylinder handleset with lever – LH Entry6.9 455 53085320.xxx.RFD Full dummy set with lever – RH Dummy85320.xxx.LFD Full dummy set with lever – LH Dummy5.2 365 440.ENTRChooseknob or lever.LENT or .RENT69

ENTR ANCE SETS, TUBULARSECTIONALLogan Sectional Trimw/ 5015 Classic knob or 5455V Wave leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285315.xxx.ENTR Single cylinder handleset with interior knob 5.7 $425 $50085315.xxx.DBLC Double cylinder handleset with interior knob 5.8 455 53085315.xxx.FD Full dummy set with interior knob 4.3 365 44085315.xxx.RENT Single cylinder handleset with lever - RH Entry85315.xxx.LENT Single cylinder handleset with lever - LH Entry6.7 425 50085315.xxx.RDBL Double cylinder handleset with lever - RH Entry85315.xxx.LDBL Double cylinder handleset with lever - LH Entry6.8 455 53085315.xxx.RFD Full dummy set with lever – RH Dummy85315.xxx.LFD Full dummy set with lever – LH Dummy5.3 365 440.ENTRChooseKnob or Leverfor interior.LENT or .RENTLogan Sectional Trimw/ 5025 Egg knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285335.xxx.ENTR Single cylinder handleset with interior knob 5.7 $425 $50085335.xxx.DBLC Double cylinder handleset with interior knob 5.8 455 53085335.xxx.FD Full dummy set with interior knob 4.3 365 440.ENTR

ENTR ANCE SETS, TUBULARSECTIONALTahoe Sectional Trimw/ 5023 Tahoe knob or 5465V Tahoe leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285325.xxx.ENTR Single cylinder handleset with interior knob 5.8 $425 $50085325.xxx.DBLC Double cylinder handleset with interior knob 6.1 455 53085325.xxx.FD Full dummy set with interior knob 4.6 365 44085325.xxx.RENT Single cylinder handleset with lever – RH Entry85325.xxx.LENT Single cylinder handleset with lever – LH Entry6.8 425 50085325.xxx.RDBL Double cylinder handleset with lever RH Entry85325.xxx.LDBL Double cylinder handleset with lever LH Entry6.1 455 53085325.xxx.RFD Full dummy set with lever – RH Dummy85325.xxx.LFD Full dummy set with lever – LH Dummy5.6 365 440.ENTRChooseknob or lever.LENT or .RENTBethpage ® Sectional Trimw/ 5077 Bethpage knob or 5447V Bethpage leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285327.xxx.ENTR Single cylinder handleset with interior knob 5.8 $425 $50085327.xxx.DBLC Double cylinder handleset with interior knob 6.1 455 53085327.xxx.FD Full dummy set with interior knob 4.6 365 44085327.xxx.RENT Single cylinder handleset with lever – RH Entry85327.xxx.LENT Single cylinder handleset with lever – LH Entry6.8 425 50085327.xxx.RDBL Double cylinder handleset with lever – RH Entry85327.xxx.LDBL Double cylinder handleset with lever – LH Entry7.1 455 53085327.xxx.RFD Full dummy set with lever – RH Dummy85327.xxx.LFD Full dummy set with lever – LH Dummy5.6 365 440.ENTRChooseknob or lever.LENT or .RENT71

ENTR ANCE SETS, TUBULARSECTIONALSoho ® Sectional Trimw/ 5485V leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285386.xxx.RENT Single cylinder handlesetw/ Lever – RH Entry85386.xxx.LENT Single cylinder handlesetw/ Lever – LH Entry6.8 $425 $50085386.xxx.RDBL Double cylinder handleset w/ Lever – RH Entry85386.xxx.LDBL Double cylinder handleset w/ Lever – LH Entry7.1 455 53085386.xxx.RFD Full dummy set w/ Lever – RH Dummy85386.xxx.LFD Full dummy set w/ Lever – LH Dummy5.6 365 440.RENT or .LENTBristol Sectional Egress Handlesetw/ 5064 knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526420.xxx.ENTR Single cylinder handleset with interior knob 8.7 $575 $6506420.xxx.FD Full dummy set with interior knob 6.7 515 590Adjustable backset latch and deadbolt – 2.375˝ & 2.75˝0.56˝(14.3mm).ENTR)2.23˝(56.6mm)2.74˝(69.5mm)

ENTR ANCE SETS, TUBULAR¾ ESCUTCHEONNantucket Escutcheon Trimw/ 5020 Colonial knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285370.xxx.ENTR Single cylinder handleset with interior knob 6.8 $475 $55085370.xxx.DBLC Double cylinder handleset with interior knob 7.0 505 58085370.xxx.FD Full dummy set with interior knob 5.1 415 490Manchester Emergency Egress Handlesetw/ 5455V Wave leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285350.xxx.ENTR Single cylinder handleset – less lever,emergency egress-active5.7 $475 $55085350.xxx.FD Full dummy set less lever - inactive 4.3 415 49085350.xxx.RENT Single cylinder handleset w/ lever,emergency egress – RH Entry85350.xxx.LENT85350.xxx.RFD85350.xxx.LFDSingle cylinder handleset w/ lever,emergency egress – LH EntryFull dummy set with lever – RH DummyFull dummy set with lever – LH Dummy8.3 525 6006.2 465 540.LENT or .RENT73

ENTR ANCE SETS, TUBULAR¾ ESCUTCHEONGlennon Escutcheon Trimw/ 5015 Classic knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285375.xxx.ENTR Single cylinder handleset with interior knob 6.4 $475 $55085375.xxx.DBLC Double cylinder handleset with interior knob 6.6 505 58085375.xxx.FD Full dummy set with interior knob 4.7 415 490.ENTRStonegate Emergency Egress Handlesetw/ 5445V Classic leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285355.xxx.ENTR Single cylinder handleset – less lever,emergency egress - active5.7 $475 $55085355.xxx.FD Full dummy set less lever - inactive 4.3 415 49085355.xxx.RENT Single cylinder handleset w/ lever,emergency egress – RH Entry85355.xxx.LENT85355.xxx.RFD85355.xxx.LFDSingle cylinder handleset w/ lever,emergency egress – LH EntryFull dummy set with lever – RH DummyFull dummy set with lever – LH Dummy8.1 525 6005.9 465 540.LENT or .RENT

ENTR ANCE SETS, TUBULAR¾ ESCUTCHEONBuckingham ® Escutcheon Trimw/ 5015 Classic knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285380.xxx.ENTR Single cylinder handleset with interior knob 6.8 $475 $55085380.xxx.DBLC Double cylinder handleset with interior knob 7.0 505 45085380.xxx.FD Full dummy set with interior knob 5.1 415 490.ENTRBlakely Emergency Egress Handlesetw/ 5025 Egg knobItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285360.xxx.ENTR Single cylinder handleset with interior knob 6.8 $525 $60085360.xxx.FD Full dummy set with interior knob 5.1 465 540.ENTR75

ENTR ANCE SETS, TUBULAR¾ ESCUTCHEONBethpage ® Emergency Egress Handlesetw/ 5077 Bethpage knob or 5447V Bethpage leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285337.xxx.ENTR Single cylinder handleset with interior knob,emergency egress6.8 $625 $70085337.xxx.FD Full dummy set with interior knob 5.4 565 64085337.xxx.RENT Single cylinder handleset w/ lever,emergency egress – RH Entry85337.xxx.LENT85337.xxx.RFD85337.xxx.LFDSingle cylinder handleset w/ lever,emergency egress – LH EntryFull dummy set with lever – RH DummyFull dummy set with lever – LH Dummy7.8 625 7006.2 565 6402.67˝(68.0mm)0.58˝(15.0mm)0.58˝(15.0mm)2.67˝(68.0mm).ENTR.LENT or .RENT10.15˝(258.0mm)Chooseknob or lever17.53˝(445.0mm)7.75˝(197.0mm)CTC3.02˝(77.0mm)5.79˝(147.0mm)3.79˝(96.0mm)2.07˝(53.0mm)3.14˝(80.0mm)Tahoe Emergency Egress Handlesetw/ 5023 Tahoe knob or 5465V Tahoe leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285340.xxx.ENTR Single cylinder handleset with knob,emergency egress6.7 $625 $70085340.xxx.FD Full dummy set with interior knob 5.1 565 64085340.xxx.RENT Single cylinder handleset w/ lever,emergency egress – RH Entry85340.xxx.LENT85340.xxx.RFD85340.xxx.LFDSingle cylinder handleset w/ lever,emergency egress – LH EntryFull dummy set with lever – RH DummyFull dummy set with lever – LH Dummy7.8 625 7006.1 565 640.ENTR.LENT or .RENTChooseknob or lever

ENTR ANCE SETS, TUBULAR¾ | FULL ESCUTCHEONKensington Emergency Egress Handlesetw/5108 Lever030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526426.xxx.RENT Single cylinder handleset with RIGHT lever,emergency egress6426.xxx.LENT Single cylinder handleset with LEFT lever,10.8 $575 $650emergency egress6426.xxx.RFD Full dummy set with RIGHT lever6426.xxx.LFD Full dummy set with LEFT lever8.5 515 590.75"3.28"12.62"6.4"3.53"3.22"1.48"6401 – Devonshire Emergency Egress Handlesetw/5152 Lever031, 033034, 040Item # Description Wt.050, 060, 102,112, 150, 151190, 260, 264003, 055056, 402412, 4526401.xxx.RENT Single cylinder handleset with RIGHT lever,emergency egress6401.xxx.LENT Single cylinder handleset with LEFT lever,8.3 $625 $700emergency egress6401.xxx.RFD Full dummy set with RIGHT lever6401.xxx.LFD Full dummy set with LEFT lever6.2 565 6406401.xxx.ENTR Single cylinder handleset emergency egressless lever8.3 575 6506401.xxx.FD Full dummy set less lever 6.2 515 590Adjustable backset latch and deadbolt – 2.375˝ & 2.75˝.53"3"LEVER: 5152Available as pre-pack set only.Includes emergency egress on active set.Split finish available.18"8"2.9"77

ENTR ANCE SETS, TUBULAR¾ | FULL ESCUTCHEONBoulder ¾ Escutcheon Handleset Emergency Egressw/ 5024 Oval knob or 5452V Beavertail leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285354.xxx.ENTR Single cylinder handleset with interior knob,emergency egress7.3 $625 $70085354.xxx.FD Full dummy set with interior knob 5.7 565 64085354.xxx.RENT85354.xxx.LENTSingle cylinder handleset w/ lever,emergency egress – RH EntrySingle cylinder handleset w/ lever,emergency egress – LH Entry7.3 625 70085354.xxx.RFD Full dummy set with lever – RH Dummy85354.xxx.LFD Full dummy set with lever – LH Dummy5.7 565 6403.03.463.0.ENTR.LENT or .RENT11.2Chooseknob or lever18.728.02.983.25Boulder Full Escutcheon Handleset Emergency Egressw/ 5024 Oval knob or 5452V Beavertail leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526402.xxx.ENTR Single cylinder handleset with interior knob,emergency egress9.2 $625 $7006402.xxx.FD Full dummy set with interior knob 7.2 565 6406402.xxx.RENT6402.xxx.LENTSingle cylinder handleset with lever,emergency egress – RH EntrySingle cylinder handleset with lever,emergency egress – LH Entry9.2 625 7006402.xxx.RFD Full dummy set with lever – RH Dummy6402.xxx.LFD Full dummy set with lever – LH Dummy7.2 565 6405.623.75.ENTR.LENT or .RENT11.21Chooseknob or lever18.038.02.633.0 3.46

ENTR ANCE SETS, TUBULAR¾ | FULL ESCUTCHEONCody ¾ Escutcheon Handleset Emergency Egressw/ 5024 Oval knob or 5452V Beavertail leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285352.xxx.ENTR Single cylinder handleset with interior knob,emergency egress7.3 $625 $70085352.xxx.FD Full dummy set with interior knob 5.7 565 64085352.xxx.RENT85352.xxx.LENTSingle cylinder handleset w/ lever,emergency egress – RH EntrySingle cylinder handleset w/ lever,emergency egress – LH Entry7.3 625 70085352.xxx.RFD Full dummy set with lever – RH Dummy85352.xxx.LFD Full dummy set with lever – LH Dummy5.7 565 6403.0 3.463.02.98.ENTRChooseknob or lever.LENT or .RENT9.2517.378.02.52.5Cody Full Escutcheon Handleset Emergency Egressw/ 5024 Oval knob or 5452V Beavertail leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526403.xxx.ENTR Single cylinder handleset with interior knob,emergency egress9.2 $625 $7006403.xxx.FD Full dummy set with interior knob 7.2 565 6406403.xxx.RENT6403.xxx.LENTSingle cylinder handleset w/ lever,emergency egress – RH EntrySingle cylinder handleset w/ lever,emergency egress – LH Entry9.2 625 7006403.xxx.RFD Full dummy set with lever – RH Dummy6403.xxx.LFD Full dummy set with lever – LH Dummy7.2 565 640.ENTR.LENT or .RENT3.05.61 2.63Chooseknob or lever9.2517.878.03.4679

ENTR ANCE SETS, TUBULAR¾ ESCUTCHEON | TWO POINT LOCKINGSoho ® ¾ Escutcheon Handleset Emergency Egressw/ 5485V leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285387.xxx.RENT85387.xxx.LENTSingle cylinder handlesetw/ Lever – RH Entry ,Emegency EgressSingle cylinder handlesetw/ Lever – LH Entry,Emegency Egress7.8 $625 $70085387.xxx.RFD Full dummy set w/ Lever – RH Dummy85387.xxx.LFD Full dummy set w/ Lever – LH Dummy6.2 565 640.RENT or .LENTAshton ® Two-Point Lock Handlesetw/ 5210 Colonial knob or 5255 Wave leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285365.xxx.2ENT Single cylinder handleset with interior knob 9.2 $525 $60085365.xxx.2DC Double cylinder handleset with interior knob 8.9 555 63085365.xxx.2FD Full dummy set with interior knob 8.6 465 54085365.xxx.2RH Single cylinder handleset with lever – RH Entry85365.xxx.2LH Single cylinder handleset with lever – LH Entry8.8 525 60085365.xxx.2DCR Double cylinder handleset with lever – RH Entry85365.xxx.2DCL Double cylinder handleset with lever – LH Entry8.5 555 63085365.xxx.2RFD Full dummy set with lever – RH Dummy85365.xxx.2LFD Full dummy set with lever – LH Dummy8.1 465 540NOTE: 2” thick door maximum.3.00≤(76.2mm)4.28≤(108.7mm)1.00≤(25.4mm)0.53≤(13.5mm)3.00≤(76.2mm)4.28≤(108.7mm)1.53≤(38.9mm)0.53≤(13.5mm)3.00≤(76.2mm)0.53≤(13.5mm)3.06≤(77.7mm)0.59≤(15.0mm).2ENT.2LH or 2RH7.59≤(192.8mm)6.77≤(172.0mm)Chooseknob or lever8.00≤203.2mm)2.12≤(53.8mm)2.45≤(62.2mm)2.88≤(73.1mm)

ENTR ANCE SETS, TUBULARTWO POINT LOCKINGLandon ® Two-Point Lock Handlesetw/ 5225 Egg knob or 5255 Wave leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285345.xxx.2ENT Single cylinder handleset with interior knob 8.8 $525 $60085345.xxx.2DC Double cylinder handleset with interior knob 8.6 555 63085345.xxx.2FD Full dummy set with interior knob 8.1 465 54085345.xxx.2RH Single cylinder handleset with lever – RH Entry85345.xxx.2LH Single cylinder handleset with lever – LH Entry8.3 525 60085345.xxx.2DCR Double cylinder handleset with lever – RH Entry85345.xxx.2DCL Double cylinder handleset with lever – LH Entry8.1 555 63085345.xxx.2RFD Full dummy set with lever – RH Dummy85345.xxx.2LFD Full dummy set with lever – LH Dummy7.7 465 540NOTE: 2” thick door maximum.2.75≤(69.9mm)3.75≤(95.3mm)1.00≤(25.4mm)0.53≤(13.5mm)2.75≤(69.9mm)3.75≤(95.3mm)1.48≤(37.6mm)0.53≤(13.5mm)3.00≤(76.2mm)0.53≤(13.5mm)0.59≤(15.0mm).2ENT.2RH or .2LH7.50≤(190.5mm)7.50≤(190.5mm)Chooseknob or lever14.18≤(360.2mm)3.00≤(76.2mm)2.94≤(74.7mm)3.62≤(91.9mm)1.87≤(47.5mm)3.23≤(82.0mm)Soho ® Two-Point Lock Handlesetw/ Soho leverItem # Description Wt.031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 45285385.xxx.2RH Single cylinder handleset with lever – RH Entry85385.xxx.2LH Single cylinder handleset with lever – LH Entry9.7 $525 $60085385.xxx.2DCR Double cylinder handleset with lever – RH Entry85385.xxx.2DCL Double cylinder handleset with lever – LH Entry9.4 555 63085385.xxx.2RFD Full dummy set with lever – RH Dummy85385.xxx.2LFD Full dummy set with lever – LH Dummy8.9 465 540NOTE: 2” thick door maximum.2.82˝(71.6mm)1.04˝(26.4mm)0.53˝(13.5mm)0.53˝(13.5mm)1.22˝(31.0mm)2.82˝(71.6mm)2.98˝(75.7mm)2.98˝(75.7mm)2.82˝(71.6mm)0.53≤(13.5mm)0.59˝(15.0mm)2.82˝(71.6mm).2LH or 2 RH8.15˝(207.0mm)8.15˝(207.0mm)14.52˝(368.8mm)8.00˝(203.2mm)CTC2.40˝(61.0mm)5.78˝(146.8mm)2.15˝(54.6mm)1.80˝(45.7mm)2.53˝(64.3mm)81

ENTRANCE TRIM, MORTISEEDINBURGHINTERIOR EXT SET EXT SET030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Item # Description Wt.6515.xxx.ENTR Entrance Trim – Edinburgh sectional Set -6515.xxx.DBLC Double Cylinder Set - $475 $5506515.xxx.FD Full Dummy Set -6515.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets - 950 † 1100 †6638.xxx Active Exterior Trim Each -6638.xxx.DM Dummy Exterior Trim Each -355 4006516.xxx.ENTR Entrance Trim – Oval Edinburgh Set -6516.xxx.DBLC Double Cylinder Set - 475 5506516.xxx.FD Full Dummy Set -6639.xxx Active Exterior Trim Each -6639.xxx.DM Dummy Exterior Trim Each -355 400Interior Escutcheon –6515.xxx.KC Cut for Cylinder (KC), Double Cylinder Each -6515.xxx.KE** Cut for Emergency Release (KE) Each - 185 2206515.xxx.KN Cut for Knob (KN), Passage/Dummy Each -6515.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each - 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.0.56"(14.3mm)0.56"(14.3mm)0.56"(14.3mm)3.94"(100.0mm)10.75"(273.1mm)10.75"(273.11mm)4.69"(119.1mm)17.38"(441.3mm)2.70"(68.6mm)2.74"(69.5mm)2.72"(69.1mm)3.08"(78.2mm)2.73"(69.4mm)4.25"(108.0mm)Trim width: 2.75˝Trim thickness: .56˝ – ISets6515.xxx.ENTRSectional6516.xxx.ENTROval6515.xxx.DBLCSectional6515.xxx.FDSectional6516.xxx.DBLCOval6516.xxx.FDOvalExterior Trim 6638.xxx 6639.xxx 6638.xxx 6638.xxx.DM 6639.xxx 6639.xxx.DMInterior Escutcheon 6515.xxx.KT 6515.xxx.KT 6515.xxx.KC 6515.xxx.KN 6515.xxx.KC 6515.xxx.KNKnob/Lever 5031.xxx.MR 5031.xxx.MR 5031.xxx.IMR 5031.xxx.IMR 5031.xxx.IMR 5031.xxx.IMRSpindle 0530 - 2.375˝ Half Spindle 0533.004 (2.25˝ Half) 0530.004 (2.375˝ Half) 5092 (1.125˝ Dummy) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8325 for 1.75˝ door 8325 for 1.75˝ door Double 6761 (Dummy) Double 6761 (Dummy)Mortise Lock • • • •Designer Entrance Entrance Single Cylinder Double Cylinder Privacy PassageExterior Trim 6638.xxx 6639.xxx 6515.xxx.KC 6515.xxx.KC 6515.xxx.KE**Interior Escutcheon 6515.xxx.KT 6515.xxx.KT 6515.xxx.KT 6515.xxx.KC 6515.xxx.KT 6515.xxx.KN (x2)Knob/Lever Half Pair Half Pair Pair Pair Pair PairSpindle • • • • • •REQUIRED —Cylinder • • • • (Double)Mortise Lock • • • • • •Blocking Ring•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELYshown in grey**(All .KE hardware include 6701 ER cover)

ENTRANCE TRIM, MORTISEBRISTOLINTERIOR EXT SET030, 031,033, 034, 040,050, 060, 102,112, 150, 151,190, 260, 264003, 055056, 402412, 452Item # Description Wt.6520.xxx.ENTR Entrance Trim Set6520.xxx.DBLC Double Cylinder Set$475 $5506520.xxx.FD Full Dummy Set6520.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6640.xxx Active Exterior Trim Each6640.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6520.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6520.xxx.KE** Cut for Emergency Release (KE) Each185 2206520.xxx.KN Cut for Knob (KN), Passage/Dummy Each6520.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.0.56"(14.3mm)0.56"(14.3mm)3.87"(98.3mm)9.98"(253.5mm)4.63"(117.7mm)2.23"(56.6mm)2.72"(69.1mm)2.85"(72.3mm)3.68"(93.5mm)Trim width: 2.5˝Trim thickness: .56˝ – ISets 6520.xxx.ENTR 6520.xxx.DBLC 6520.xxx.FDExterior Trim 6640.xxx 6640.xxx 6640.xxx.DMInterior Escutcheon 6520.xxx.KT 6520.xxx.KC 6520.xxx.KNKnob/Lever 5064.xxx.IMR 5064.xxx.IMR 5064.xxx.IMRSpindle 0530 - 2.375˝ Half Spindle 0533.004 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8325 for 1.75˝ door Double DummyMortise Lock • •Blocking Ring•Designer Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6640.xxx 6520.xxx.KC 6520.xxx.KC 6520.xxx.KE**Interior Escutcheon 6520.xxx 6520.xxx.KT 6520.xxx.KC 6520.xxx.KT 6520.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • • • • Latch & Mortise Bolt or Lock • Latch or Mortise LockBlocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝83**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEKENSINGTONINTERIOR EXT SETItem # Description Wt.6526.xxx.RENT (LENT) Entrance Trim Set6526.xxx.RDBL (LDBL) Double Cylinder Set6526.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506526.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6643.xxx Active Exterior Trim Each6643.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6525.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6525.xxx.KE** Cut for Emergency Release (KE) Each185 2206525.xxx.KN Cut for Knob (KN), Passage/Dummy Each6525.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.0.56≤(14.2mm)0.56≤(14.2mm)12.62≤ 2≤(320.5mm) mm)6.50≤(165.1mm)CTC2.88≤(73.2mm)3.53≤(89.7mm) Trim width: 2.5˝Trim thickness: .56˝ – ISets 6526.xxx.RENT (LENT) 6526.xxx.DBLC 6526.xxx.RFD (LFD)Exterior Trim 6643.xxx 6643.xxx 6643.xxx.DMInterior Escutcheon 6525.xxx.KT 6525.xxx.KT 6525.xxx.KTKnob/Lever 5108.xxx.RMR (LMR) 5108.xxx.RMR (LMR) 5108.xxx.RMR (LMR)Spindle 0530 (2.375˝ Half) 0533.004 (2.25˝ Half) 5092 (1.125˝ Dummy)Cylinder 8325 for 1.75˝ door Double 6761 (Dummy)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•Designer Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6643.xxx 6525.xxx.KC 6525.xxx.KC 6525.xxx.KE**Interior Escutcheon 6525.xxx.KT 6525.xxx.KT 6525.xxx.KC 6525.xxx.KT 6525.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength) • (Lever Strength) Mortise Bolt or Mortise Lock Latch or Interior Mortise LockBlocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELYshown in grey**(All .KE hardware include 6701 ER cover)

ENTRANCE TRIM, MORTISESAN DIEGO®INTERIOR EXT SETItem # Description Wt.6540.xxx.ENTR Entrance Trim Set 9.56540.xxx.DBLC Double Cylinder Set6540.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506540.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6603.xxx Active Exterior Trim Each6603.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6763.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6763.xxx.KE** Cut for Emergency Release (KE) Each95 1306763.xxx.KN Cut for Knob (KN), Passage/Dummy Each6763.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.Trim width: 2.5˝Trim thickness: .093˝ – BSets 6540.xxx.ENTR 6540.xxx.DBLC 6540.xxx.FDExterior Trim 6603.xxx 6603.xxx 6603.xxx.DMInterior Escutcheon 6763.xxx.KT 6763.xxx.KC 6763.xxx.KNKnob/Lever 5041.xxx.IMR 5041.xxx.IMR 5041.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 for 1.75˝ door Double 6761 (Dummy)Mortise Lock • •Blocking Ring•Designer Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6603.xxx 6763.xxx.KC 6763.xxx.KC 6763.xxx.KE**Interior Escutcheon 6763.xxx.KE** 6763.xxx.KT 6763.xxx.KC 6763.xxx.KT 6763.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double) •Mortise Lock • • • Mortise Bolt or Mortise Lock Latch or Interior Mortise LockBlocking Ring•Turn Knob•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝85**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISESAN FRANCISCOINTERIOR EXT SETItem # Description Wt.6541.xxx.ENTR Entrance Trim Set 4.66541.xxx.DBLC Double Cylinder Set6541.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506541.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6975.xxx Active Exterior Trim only Each6975.xxx.DM Dummy Exterior only Each240 270Interior Escutcheon –6975.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6975.xxx.KE** Cut for Emergency Release (KE**) Each185 2206975.xxx.KN Cut for Knob (KN), Passage/Dummy Each6975.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606975.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.25.32.251.411.911.92.12.12.22.2Trim thickness: .125˝ – CSets 6541.xxx.ENTR 6541.xxx.DBLC 6541.xxx.FDExterior Trim 6975.xxx.KC 6975.xxx.KC 6975.xxx.DMInterior Escutcheon 6975.xxx.KT 6975.xxx.KC 6975.xxx.KNKnob/Lever 5020.xxx.MR (Pair) 5020.xxx.MR (Pair) 5020.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Straight) 0510 (3.5˝ Straight)Cylinder 8322 (1.75˝ Door) •Mortise Lock • •Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6975.xxx.KC 6975.xxx.KE**Interior Escutcheon 6975.xxx.KT 6975.xxx. (.KT or .KP) 6975.xxx.KN (x2)Knob/Lever Pair Pair PairREQUIRED —Spindle • • •Cylinder•Mortise Lock • • (Mortise Bolt or Mortise Lock) • (Latch or Mortise Lock)SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISETREMONTINTERIOR EXT SETItem # Description Wt.6542.xxx.ENTR Entrance Trim Set 9.56542.xxx.DBLC Double Cylinder Set6542.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506542.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6605.xxx.BB75 Entrance Back-to-Back Set6605.xxx.BB30 Entrance Back-to-Back Set1075 11506605.xxx.BBFD Dummy Back-to-Back Set6605.xxx Active Exterior Trim Each6605.xxx.DM Dummy Exterior Trim Each580 625Interior Escutcheon –6796.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6796.xxx.KE** Cut for Emergency Release (KE**) Each185 2206796.xxx.KN Cut for Knob (KN), Passage/Dummy Each6796.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606796.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons† .ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.3.83.31.911172.172.62.5Trim width: 3.3˝Trim thickness: .75˝ – JSets6605.xxx.BB756542.xxx.ENTR 6542.xxx.DBLC 6542.xxx.FD (BB30, BBFD)Exterior Trim 6605.xxx 6605.xxx 6605.xxx.DM 6605.xxx. (x2)Interior Escutcheon 6796.xxx.KT 6796.xxx.KC 6796.xxx.KNKnob/Lever 5020.xxx.IMR 5020.xxx.IMR 5020.xxx.IMRSpindle 0531 (2.875˝ Half) 0531 (2.875˝ Half) 5077 (1.5˝ Double)Cylinder 8326 (1.75˝ Door) (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •Designer Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6605.xxx 6796.xxx.KC 6796.xxx.KC 6796.xxx.KE**Interior Escutcheon6796.xxx.KE** (.KE is cut for ER trim or TurnKnob – if standard Turn Knobis desired, order .KT)6796.xxx.KT 6796.xxx.KC 6796.xxx.KT or .KP 6796.xxx.KN (x2)Knob/Lever 6735 (Knob) / 5162.xxx.RMR (.LMR) (Lever) Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • • • • (Mortise Bolt or Mortise Lock) • (Latch or Interior Mortise Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝87**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISELANCASTER / BOSTONINTERIOR SET EXT SET030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264Item # Description Wt.6543.xxx.ENTR Entrance Trim – Lancaster Set 9.56543.xxx.DBLC Double Cylinder Set$475 $5506543.xxx.FD Full Dummy Set6543.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6635.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6635.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506635.xxx.BBFD Dummy Back-to-Back Set6635.xxx Active Exterior Trim only Each6635.xxx.DM Dummy Exterior only Each355 4006555.xxx.ENTR Entrance Trim – Boston Set 4.26555.xxx.DBLC Double Cylinder Set 375 4506555.xxx.FD Full Dummy Set6555.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †Interior Escutcheon –6797.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6797.xxx.KE** Cut for Emergency Release (KE**) Each93 1306797.xxx.KN Cut for Knob (KN), Passage/Dummy Each6797.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 1706797.xxx.KP Escutcheons Cut for Privacy (KP) Pair 190 260003055056NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.75.1.92.7510216LancasterSets 6543.xxx.ENTR 6543.xxx.DBLC 6543.xxx.FD6635.xxx.BB75(BB30, BBFD)Exterior Trim 6635.xxx 6635.xxx 6635.xxx.DM 6635.xxx (x2)Interior Escutcheon 6797.xxx.KT 6797.xxx.KC 6797.xxx.KNKnob/Lever 5000.xxx.IMR 5000.xxx.IMR 5000.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •2.2Trim width: 2.5˝Trim thickness: .093˝ – B6BostonSets 6555.xxx.ENTR 6555.xxx.DBLC 6555.xxx.FDExterior Trim 6797.xxx.KC 6797.xxx.KCInterior Escutcheon 6797.xxx.KT 6797.xxx.KC 6797.xxx.KN (x2)Knob/Lever 5000.xxx.MR (Pair) 5000.xxx.MR (Pair) 5000.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Swivel) 0520 (3.5˝ Straight)Cylinder • • (Double)Mortise Lock • •Blocking Ring•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝REQUIRED —Designer Lancaster Entrance Boston PrivacyExterior Trim 6635.xxx 6797.xxx.KE**Interior Escutcheon 6797.xxx.KT 6797.xxx.KT or .KPKnob/Lever 5106.xxx.RMR (.LMR) PairSpindle • •Cylinder•Mortise Lock • (Lever Strength) • (Lever Strength)Blocking RingTurn KnobMUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEHAMILTON / STANFORDINTERIOR SET EXT SETItem # Description Wt.6544.xxx.RENT (LENT) Entrance Trim – Hamilton Set 9.06544.xxx.RDBL (LDBL) Double Cylinder Set6544.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506544.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6622.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6622.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set1075 11506622.xxx.BBFD Dummy Back-to-Back Set6622.xxx Active Exterior Trim only Each6622.xxx.DM Dummy Exterior only Each580 6256951.xxx.ENTR Entrance Trim – Stanford Set 6.06951.xxx.DBLC Double Cylinder Set 475 5506951.xxx.FD Full Dummy Set6951.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †Interior Escutcheon –6791.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6791.xxx.KE** Cut for Emergency Release (KE**) Each6791.xxx.KN Cut for Knob (KN), Passage/Dummy Each185 2206791.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.41.83.4.810.81173.9 2.97HamiltonSets6544.xxx.RENT(LENT)6544.xxx.RDBL(LDBL)6544.xxx.RFD(LFD)6622.xxx.BB75(BB30, BBFD)Exterior Trim 6622.xxx 6622.xxx 6622.xxx.DM 6622.xxx (x2)Interior Escutcheon 6791.xxx.KT 6791.xxx.KC 6791.xxx.KNKnob/Lever 5152.xxx.RMR (.LMR) 5152.xxx.RMR (.LMR) 5152.xxx.RMR (.LMR)Spindle 0531 (2.875˝ Half) 0531 (2.875˝ Half) 5077 (1.5˝ Dummy)Cylinder 8326 for 1.75˝ door • (Double) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • •Blocking Ring • •2.9Trim width: 3.375˝Trim thickness: .75˝ – JStanfordSets 6951.xxx.ENTR 6951.xxx.DBLC 6951.xxx.FDExterior Trim 6791.xxx.KC 6791.xxx.KCInterior Escutcheon 6791.xxx.KT 6791.xxx.KC 6791.xxx.KN (x2)Knob/Lever 5152.xxx.MR (Pair) 5152.xxx.MR (Pair) 5152.xxx.MR (Pair)Spindle 0524 (5.5˝ Swivel) 0524 (5.5˝ Swivel) 0514 (5.5˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•REQUIRED —Designer Hamilton Entrance Stanford PrivacyExterior Trim 6622.xxx 6791.xxx.KE**Interior Escutcheon 6791.xxx.KT 6791.xxx.KTKnob/Lever 5064.xxx.IMR PairSpindle • •Cylinder•Mortise Lock • • Latch & Mortise Bolt or LockBlocking RingSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝89**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISENASHVILLEINTERIOR EXT SETItem # Description Wt.6547.xxx.ENTR Entrance Trim Set 6.16547.xxx.DBLC Double Cylinder Set6547.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506547.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6547.xxx.DM Dummy Exterior only Each 240 270Interior Escutcheon –6793.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6793.xxx.KE** Cut for Emergency Release (KE) Each185 2206793.xxx.KN Cut for Knob (KN), Passage/Dummy Each6793.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606793.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.8.42.8 1.410102.12.22.1Trim thickness: .125˝ – CSets 6547.xxx.ENTR 6547.xxx.DBLC 6547.xxx.FDExterior Trim 6793.xxx.KC 6793.xxx.KCInterior Escutcheon 6793.xxx.KT 6793.xxx.KC 6793.xxx.KN (x2)Knob/Lever 5020.xxx.MR (Pair) 5020.xxx.MR (Pair) 5020.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0522 (4˝ Straight)Cylinder 8322 (1.75˝ Door) 8321 (1.75˝ Door)Mortise Lock • •Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6793.xxx.KC 6793.xxx.KE**Interior Escutcheon 6793.xxx.KT 6793.xxx.KT or .KP 6793.xxx.KN (x2)Knob/Lever Pair Pair PairSpindle • • •REQUIRED —Cylinder•Mortise Lock • • (Latch & Mortise Bolt or Mortise Lock) • (Latch or Interior Mortise Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEWILLIAMSBURG / GEORGETOWNINT SET EXT SETItem # Description Wt.6549.xxx.RENT (LENT) Entrance Trim – Williamsburg Set 9.56549.xxx.RDBL (LDBL) Double Cylinder Set6549.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506549.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6628.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6628.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506628.xxx.BBFD Dummy Back-to-Back Set6628.xxx Active Exterior Trim only Each6628.xxx.DM Dummy Exterior only Each355 4006550.xxx.RENT (LENT) Entrance Trim – Georgetown Set6550.xxx.RDBL (LDBL) Double Cylinder Set375 4506550.xxx.RFD (LFD) Full Dummy Set6550.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †Interior Escutcheon –6505.xxx.RKC (LKC) Cut for Cylinder (KC), Double Cylinder Each6505.xxx.RKE (LKE) Cut for Emergency Release (KE) Each95 1306505.xxx.RKN (LKN) Cut for Knob (KN), Passage/Dummy Each6505.xxx.RKT (LKT) Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.8.342.25.910.16.75216.536.5WilliamsburgSets6549.xxx.RENT(LENT)6544.xxx.RDBL(LDBL)6544.xxx.RFD(LFD)6622.xxx.BB75(BB30, BBFD)Exterior Trim 6628.xxx 6628.xxx 6628.xxx.DM 6628.xxx (x2)Interior Escutcheon 6505.xxx.LKT (RKT) 6505.xxx.LKC (RKC) 6505.xxx.LKN (RKN)Knob/Lever 5000.xxx.IMR 5000.xxx.IMR 5000.xxx.IMRSpindle 0531 (2.875˝ Half) 0531 (2.875˝ Half) 5077 (1.5˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) • (Dummy) • (Double)Mortise Lock • • •Blocking Ring•2.25Trim width: 2.75˝Trim thickness: .3125˝ – FInterior trim thickness: .875˝ – KNOTE: NOT available for Reverse Bevel conditionsNot available for doors thicker than 3˝34.5ER TrimGeorgetownSets6550.xxx.RENT(LENT)6550.xxx.RDBL(LDBL)6550.xxx.RFD(LFD)Cylinder Collar 6757.xxx 6757.xxxRose 5002.xxx 5002.xxx 5002.xxxInterior Escutcheon 6505.xxx.LKT 6505.xxx.LKC 6505.xxx.LKNKnob/Lever 5000.xxx.MR (Pair) 5000.xxx.MR (Pair) 5000.xxx.MR (Pair)Spindle 0526 (4.5˝ Swivel) 0526 (4.5˝ Swivel) 0526 (4.5˝ Straight)Cylinder • • (Double)Mortise Lock • •Blocking Ring•91Designer Williamsburg Entrance Georgetown PrivacyExterior Trim 6628.xxxInterior Escutcheon 6505.xxx.LKT 6505.xxx.LKTKnob/Lever 5106.xxx.RMR (.LMR) PairSpindle • •Cylinder•REQUIRED —Mortise Lock • (Lever Strength) • Latch & Mortise Bolt or LockTurn KnobOtherER Trim, Rose (for Exterior)SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEBALTIMOREINTERIOR EXT SETItem # Description Wt.6552.xxx.ENTR Entrance Trim Set 3.66552.xxx.DBLC Double Cylinder Set6552.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$375 $4506552.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †6552.xxx.DM Dummy Exterior only Each 190 220Interior Escutcheon –6767.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6767.xxx.KE** Cut for Emergency Release (KE) Each95 1306767.xxx.KN Cut for Knob (KN), Passage/Dummy Each6767.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 1706767.xxx.KP Escutcheons Cut for Privacy (KP) Pair 190 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.2 31.110102.12.2]2.2Trim thickness: .1875˝ – DSets 6552.xxx.ENTR 6552.xxx.DBLC 6552.xxx.FDExterior Trim 6767.xxx.KC 6767.xxx.KC 6552.xxx.DMInterior Escutcheon 6767.xxx.KT 6767.xxx.KC 6767.xxx.KNKnob/Lever 5015.xxx.MR (Pair) 5015.xxx.MR (Pair) 5015.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0522 (4˝ Straight)Cylinder 8322 for 1.75˝ door • (Double)Mortise Lock • •Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6767.xxx.KC 6767.xxx.KE**Interior Escutcheon 6767.xxx.KT 6767.xxx.KT or .KP 6767.xxx.KN (x2)Knob/Lever 5106.xxx.MR (Pair) 5015.xxx.MR (Pair) 5015.xxx.MR (Pair)Spindle • • •REQUIRED —Cylinder•Mortise Lock • • (Latch & Mortise Bolt or Mortise Lock) • (Latch or Interior Mortise Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISERICHMOND®INTERIOR EXT SETItem # Description Wt.6557.xxx.ENTR Entrance Trim Set 9.56557.xxx.DBLC Double Cylinder Set6557.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506557.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6606.xxx Active Exterior Trim Each6606.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6774.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6774.xxx.KE** Cut for Emergency Release (KE) Each95 1306774.xxx.KN Cut for Knob (KN), Passage/Dummy Each6774.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.12.9.112220.581.9Trim width: 3˝Trim thickness: .093˝ – BSets 6557.xxx.ENTR 6557.xxx.DBLC 6557.xxx.FDExterior Trim 6606.xxx 6606.xxx 6606.xxx.DMInterior Escutcheon 6774.xxx.KT 6774.xxx.KC 6774.xxx.KNKnob/Lever 5005.xxx.IMR 5005.xxx.IMR 5005.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•2.3DesignerExterior TrimInterior EscutcheonKnob/LeverSpindleCylinderMortise Lock6606.xxx6774.xxx.KTEntrance5132.xxx.RMR (.LMR)••• (Lever Strength)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝93**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISELEXINGTON / WILMINGTONINTERIOR SET EXT SET030, 031033, 034, 040Item # Description Wt.050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526560.xxx.ENTR Entrance Trim – Lexington Set 4.36560.xxx.DBLC Double Cylinder Set$475 $5506560.xxx.FD Full Dummy Set6560.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6621.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6621.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set 775 8506621.xxx.BBFD Dummy Back-to-Back Set6621.xxx Active Exterior Trim only Each6621.xxx.DM Dummy Exterior only Each355 4006546.xxx.ENTR Entrance Trim – Wilmington Set 3.46546.xxx.DBLC Double Cylinder Set 375 4506546.xxx.FD Full Dummy Set6546.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †Interior Escutcheon –6795.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6795.xxx.KE** Cut for Emergency Release (KE) Each95 1306795.xxx.KN Cut for Knob (KN), Passage/Dummy Each6795.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.1.12.8 .31.7.332.2510.12.54.511.52.6LexingtonSets 6560.xxx.ENTR 6560.xxx.DBLC 6560.xxx.FD6621.xxx.BB75(BB30, BBFD)Exterior Trim 6621.xxx 6621.xxx 6621.xxx.DM 6621.xxx (x2)Interior Escutcheon 6795.xxx.KT 6795.xxx.KC 6795.xxx.KNKnob/Lever 5025.xxx.IMR 5025.xxx.IMR 5025.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •1.73Trim width: 2.25˝Trim thickness: .3125˝ – F3WilmingtonSets 6546.xxx.ENTR 6546.xxx.DBLC 6546.xxx.FDExterior Trim 6795.xxx.KC 6795.xxx.KCInterior Escutcheon 6795.xxx.KT 6795.xxx.KC 6795.xxx.KN (x2)Designer Lexington Entrance Wilmington PrivacyExterior Trim 6621.xxx 6795.xxx.KE**Interior Escutcheon 6795.xxx.KT 6795.xxx.KTKnob/Lever 5025.xxx.MR (Pair) 5025.xxx.MR (Pair) 5025.xxx.MR (Pair)Knob/Lever Half Pair PairREQUIRED —Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder • • (Double)Mortise Lock • •Blocking Ring•REQUIRED —Spindle • •Cylinder•Mortise Lock • (Lever Strength) • (Latch & Bolt or Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISENEW YORK / DETROITINT SET EXT SETItem # Description Wt.6562.xxx.ENTR Entrance Trim – New York Set 9.56562.xxx.DBLC Double Cylinder Set6562.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506562.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6608.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6608.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506608.xxx.BBFD Dummy Back-to-Back Set6608.xxx Active Exterior Trim only Each6608.xxx.DM Dummy Exterior only Each355 4006548.xxx.ENTR Entrance Trim – Detroit Set 4.56548.xxx.DBLC Double Cylinder Set$375 4506548.xxx.FD Full Dummy Set6548.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †Interior Escutcheon –6503.xxx.KCOS (KCIS) Cut for Cylinder (KC), Double Cylinder Each6503.xxx.KEOS (KEIS) Cut for Emergency Release (KE**) Each95 1306503.xxx.KNOS (KNIS) Cut for Knob (KN), Passage/Dummy Each6503.xxx.KTOS (KTIS) Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.New YorkSets 6562.xxx.ENTR 6562.xxx.DBLC 6562.xxx.FD6608.xxx.BB75(BB30, BBFD)Exterior Trim 6608.xxx 6608.xxx 6608.xxx.DM 6608.xxx (x2)Interior Escutcheon 6503.xxx.KTIS 6503.xxx.KCIS 6503.xxx.KNISKnob/Lever 5041.xxx.IMR 5041.xxx.RMR (.LMR) 5041.xxx.IMRSpindle 0530 (2.375˝ Half) 0531 (2.875˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 for 1.75˝ door • (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •Trim width: 1.625˝Trim thickness: .25˝ – EDetroitSets 6548.xxx.ENTR 6548.xxx.DBLC 6548.xxx.FDExterior Trim 6503.xxx.KCOS 6503.xxx.KCOS 6503.xxx.KNOSDesigner New York Entrance Detroit PrivacyExterior Trim 6608.xxx 6503.xxx.KEOSInterior Escutcheon 6503.xxx.KTIS 6791.xxx.KCIS 6503.xxx.KNISInterior Escutcheon 6503.xxx.KEIS 6503.xxx.KTISKnob/Lever 5041.xxx.MR (Pair) 5041.xxx.MR (Pair) 5041.xxx.MR (Pair)Knob/Lever Half Pair PairREQUIRED —Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder • • (Double)Mortise Lock • •Blocking Ring•REQUIRED —Spindle • •Cylinder•Mortise Lock • (Lever Strength) • Latch & Mortise Bolt or LockAdaptor5099.004 (x2)Blocking RingTurn Knob•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝95**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISECHICAGOINTERIOR EXT SETItem # Description Wt.6563.xxx.ENTR Entrance Trim Set 9.56563.xxx.DBLC Double Cylinder Set6563.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506563.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6614.xxx Active Exterior Trim Each6614.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6763.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6763.xxx.KE** Cut for Emergency Release (KE) Each95 1306763.xxx.KN Cut for Knob (KN), Passage/Dummy Each6763.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.Sets 6563.xxx.ENTR 6563.xxx.DBLC 6563.xxx.FDExterior Trim 6614.xxx 6614.xxx 6614.xxx.DMInterior Escutcheon 6763.xxx.KT 6763.xxx.KC 6763.xxx.KNKnob/Lever 5041.xxx.IMR 5041.xxx.IMR 5041.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•Trim width: 2.5˝Trim thickness: .093˝ – BDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6614.xxx 6763.xxx.KC 6763.xxx.KC 6763.xxx.KE**Interior Escutcheon 6763.xxx.KE** 6763.xxx.KT 6763.xxx.KC 6763.xxx.KT 6763.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double) •Mortise Lock • • • •(Latch & Bolt or Lock) • (Latch or Interior Lock)Blocking Ring•Turn Knob•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEMONTEREYINTERIOR EXT SETItem # Description Wt.6565.xxx.RENT (.LENT) Entrance Trim Set 9.56565.xxx.RDBL Double Cylinder Set6565.xxx.RFD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506565.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6634.xxx Active Exterior Trim Each6634.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6642.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6642.xxx.KE** Cut for Emergency Release (KE) Each95 1306642.xxx.KN Cut for Knob (KN), Passage/Dummy Each6642.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components..1"1.9".1"1.9"23"5.75"3"4.8"Sets6565.xxx.RENT(.LENT) 6565.xxx.RDBL 6565.xxx.RFDExterior Trim 6634.xxx 6634.xxx 6634.xxxInterior Escutcheon 6642.xxx.KT 6642.xxx.KC 6642.xxx.KNKnob/Lever 5132.xxx.RMR (.LMR) 5132.xxx.RMR (.LMR) 5132.xxx.RMR (.LMR)Spindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•2.6"Trim width: 1.875˝Trim thickness: .093˝ – BDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6634.xxx 6642.xxx.KC 6642.xxx.KC 6642.xxx.KE**Interior Escutcheon 6642.xxx.KT 6642.xxx.KT 6642.xxx.KC 6642.xxx.KT 6642.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • • • Latch & Bolt or Lock) • (Latch or Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝97**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISETRENTON / READINGINTERIOR SET INTERIOR EXT SET030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264Item # Description Wt.6567.xxx.ENTR Entrance Trim – Trenton Set 9.56567.xxx.DBLC Double Cylinder Set$475 $5506567.xxx.FD Full Dummy Set6567.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6602.xxx Active Exterior Trim only Each6602.xxx.DM Dummy Exterior only Each355 400Interior Escutcheon –6508.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6508.xxx.KN Cut for Knob (KN), Passage/Dummy Each95 1306508.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 1706551.xxx.ENTR Entrance Trim – Reading Set 4.20030550566551.xxx.DBLC Double Cylinder Set375 4506551.xxx.FD Full Dummy Set6551.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †Interior Escutcheon –6765.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6765.xxx.KE** Cut for Emergency Release (KE) Each95 1306765.xxx.KN Cut for Knob (KN), Passage/Dummy Each6765.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheonsExterior screws are decorative only.†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.5.22.5.211582.1TrentonSets 6567.xxx.ENTR 6567.xxx.DBLC 6567.xxx.FDExterior Trim 6602.xxx 6602.xxx 6602.xxx.DMInterior Escutcheon 6508.xxx.KT 6508.xxx.KC 6508.xxx.KNKnob/Lever 5015.xxx.IMR 5015.xxx.IMR 5015.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8322 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•2.96.52.2Trim width: 2.25˝Trim thickness: .1875˝ – DReadingSets 6551.xxx.ENTR 6551.xxx.DBLC 6551.xxx.FDExterior Trim 6765.xxx.KC 6765.xxx.KCInterior Escutcheon 6765.xxx.KT 6765.xxx.KC 6765.xxx.KN (x2)Knob/Lever 5015.xxx.MR (Pair) 5015.xxx.MR (Pair) 5015.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder • • (Double)Mortise Lock • •Blocking Ring•REQUIRED —Designer Trenton Entrance Reading PrivacyExterior Trim 6602.xxx 6765.xxx.KE**Interior Escutcheon 6508.xxx.KT 6765.xxx.KTKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • (Lever Strength) • (Latch & Bolt or Lock)Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in greyOtherER Trim

ENTRANCE TRIM, MORTISEATLANTAINTERIOR EXT SETItem # Description Wt.6570.xxx.ENTR Entrance Trim Set 9.56570.xxx.DBLC Double Cylinder Set6570.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506570.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6619.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6619.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506619.xxx Active Exterior Trim Each 355 4006619.xxx.DM Dummy Exterior Trim EachInterior Escutcheon –6513.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6513.xxx.KE** Cut for Emergency Release (KE) Each95 1306513.xxx.KN Cut for Knob (KN), Passage/Dummy Each6513.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 1706513.xxx.KP Escutcheons Cut for Privacy (KP) Pair 190 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.251.22.25.5102.25162.67Sets6619.xxx.BB756570.xxx.ENTR 6570.xxx.DBLC 6570.xxx.FD (BB30, BBFD)Exterior Trim 6619.xxx 6619.xxx 6619.xxx.DM 6619.xxx (x2)Interior Escutcheon 6513.xxx.KC 6513.xxx.KT 6513.xxx.KNKnob/Lever 5073.xxx.IMR 5073.xxx.IMR 5073.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 for 1.75˝ door 8325 for 1.75˝ door 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •2.2Trim width: 2.25˝Trim thickness: .375˝ – GDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6619.xxx 6513.xxx.KC 6513.xxx.KC 6513.xxx.KE**Interior Escutcheon 6513.xxx.KE** 6513.xxx.KT 6513.xxx.KC 6513.xxx.KT or .KP 6513.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • • • (Latch & Bolt or Lock) • (Latch or Interior Lock)Blocking Ring•Turn Knob•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝99**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISECONCORDINTERIOR EXT SETItem # Description Wt.6571.xxx.ENTR Entrance Trim Set 3.86571.xxx.DBLC Double Cylinder Set6571.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506571.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6604.xxx Active Exterior Trim only Each6604.xxx.DM Dummy Exterior only Each355 400Interior Escutcheon –6794.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6794.xxx.KE Cut for Emergency Release (KE) Each95 1306794.xxx.KN Cut for Knob (KN), Passage/Dummy Each6794.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.5.32.31.1.252.52.583.729.45.53.31.9Trim width: 2.5˝Trim thickness: .25˝ – E2.8Sets 6571.xxx.ENTR 6571.xxx.DBLC 6571.xxx.FDExterior Trim 6604.xxx 6604.xxx 6604.xxx.DMInterior Escutcheon 6794.xxx.KT 6794.xxx.KC 6794.xxx.KNKnob/Lever 5000.xxx.IMR 5000.xxx.IMR 5000.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•Designer Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6604.xxx 6794.xxx.KC 6794.xxx.KC 6794.xxx.KE**Interior Escutcheon 6794.xxx.KT 6794.xxx.KT 6794.xxx.KC 6794.xxx.KT 6794.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • • • (Latch & Bolt or Lock) • (Latch & Bolt or Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISESPRINGFIELDINTERIOR EXT SETItem # Description Wt.6573.xxx.ENTR Entrance Trim Set 9.56573.xxx.DBLC Double Cylinder Set6573.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506573.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6628.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6628.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506628.xxx.BBFD Dummy Back-to-Back Set6628.xxx Active Exterior Trim only Each6628.xxx.DM Dummy Exterior only Each355 400Interior Escutcheon –6798.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6798.xxx.KE** Cut for Emergency Release (KE) Each95 1306798.xxx.KN Cut for Knob (KN), Passage/Dummy Each6798.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 1706798.xxx.KP Escutcheons Cut for Privacy (KP) Pair 190 260†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.**All .KE hardware include 6701 ER cover3 1.12.8.410.12.510.116.53.32.64.5Sets6628.xxx.BB756573.xxx.ENTR 6573.xxx.DBLC 6573.xxx.FD (BB30, BBFD)Exterior Trim 6628.xxx 6628.xxx 6628.xxx.DM 6638.xxx.DM (x2)Interior Escutcheon 6798.xxx.KT 6798.xxx.KC 6798.xxx.KNKnob/Lever 5025.xxx.IMR 5025.xxx.IMR 5025.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •2.25 3Trim width: 2.25˝Trim thickness: .3125˝ – FDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6628.xxx 6798.xxx.KC 6798.xxx.KC 6798.xxx.KE**Interior Escutcheon 6798.xxx.KT 6798.xxx.KT 6798.xxx.KC 6798.xxx.KT or .KP 6798.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • • • (Latch & Bolt, Lock, Latch) • (Latch or Interior Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝101**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISELAKEWOOD®INTERIOR EXT SETItem # Description Wt.6922.xxx.ENTR Entrance Trim Set 3.36922.xxx.DBLC Double Cylinder Set6922.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506922.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6922.xxx.RDM (LDM) Dummy Exterior only Each 240 270Interior Escutcheon –6980.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6980.xxx.KE** Cut for Emergency Release (KE) Each185 2206980.xxx.KN Cut for Knob (KN), Passage/Dummy Each6980.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.1.9.31.9 1.311.411.43.7 2.73.7 2.7Trim thickness: .125˝ – CSets 6922.xxx.ENTR 6922.xxx.DBLC 6922.xxx.FDExterior Trim 6980.xxx.KC 6980.xxx.KC 6922.xxx.RDMInterior Escutcheon 6980.xxx.KT 6980.xxx.KC 6980.xxx.KNKnob/Lever 5101.xxx.MR (Pair) 5101.xxx.MR (Pair) 5101.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Swivel) 0514.004 (3.5˝ Straight)Cylinder 8322 (1.75˝ Door) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6980.xxx.KC 6980.xxx.KE**Interior Escutcheon 6980.xxx.KT 6980.xxx.KT 6980.xxx.KN (x2)Knob/Lever Pair Pair PairSpindle • • •REQUIRED —Cylinder•Mortise Lock • (Latch & Bolt or Lock) • (Latch & Bolt or Lock) • (Latch or Interior Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEDALLAS / DENVERINT EXT SET EXT SETItem # Description Wt.6931.xxx.RENT (LENT) Entrance Trim – Dallas, w/ angled pull Set 9.56931.xxx.RDBL (LDBL) Double Cylinder – w/ angled pull Set6931.xxx.RFD (LFD) Full Dummy – w/ angled pull Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$475 $5506931.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6953.xxx.R (.L) Active Exterior Trim only – w/ angled pull Each6953.xxx.RDM (LDM) Dummy Exterior only – w/ angled pull Each355 4006940.xxx.ENTR Entrance Trim – Denver Set6940.xxx.DBLC Double Cylinder Set$375 4506940.xxx.FD Full Dummy Set6940.xxx.RDM (LDM) Dummy Exterior only Each 190 220Interior Escutcheon –6988.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6988.xxx.KE** Cut for Emergency Release (KE) Each95 1306988.xxx.KN Cut for Knob (KN), Passage/Dummy Each6988.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.1.6 .92679 pull is angled ~ 15˚ for use with narrow backset(1.5˝ & 2˝ ) mortise locks,may also be used with 2.5˝ & 2.75˝ mortise locks103.6 1.8Trim width: 1.625˝Trim thickness: .093˝ – BDallasSets6931.xxx.RENT(LENT)6931.xxx.RDBL(LDBL)6931.xxx.RFD(LFD)Exterior Trim 6953.xxx.R 6953.xxx.R 6953.xxx.RDMInterior Escutcheon 6988.xxx.KT 6988.xxx.KC 6988.xxx.KNKnob/Lever 5105.xxx.RMR (.LMR) 5105.xxx.RMR (.LMR) 5105.xxx.RMR (.LMR)Spindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8321 (1.75˝ Door) • (Double) 6761 (Dummy)Mortise Lock • •Blocking Ring•DenverSets 6940.xxx.ENTR 6940.xxx.DBLC 6940.xxx.FDExterior Trim 6988.xxx.KC 6988.xxx.KC 6940.xxx.RDMInterior Escutcheon 6988.xxx.KT 6988.xxx.KC 6988.xxx.KNKnob/Lever 5105.xxx.MR (Pair) 5105.xxx.MR (Pair) 5105.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Swivel) 0510 (3.5˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•REQUIRED —Designer Dallas Entrance Denver PrivacyExterior Trim 6953.xxx.R (.L) 6988.xxx.KE**Interior Escutcheon 6988.xxx.KT 6988.xxx.KTKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • • Latch & Mortise Bolt or LockBlocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝103**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEMOBILEINTERIOR EXT SETItem # Description Wt.6938.xxx.ENTR Entrance Trim Set 3.56938.xxx.DBLC Double Cylinder Set6938.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506938.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6938.xxx.RDM (LDM) Dummy Exterior only Each 240 270Interior Escutcheon –6996.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6996.xxx.KE** Cut for Emergency Release (KE) Each185 2206996.xxx.KN Cut for Knob (KN), Passage/Dummy Each6996.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.22.2.32.1.31.311.511.54.4 4.42.2Trim thickness: .125˝ – CSets 6938.xxx.ENTR 6938.xxx.DBLC 6938.xxx.FDExterior Trim 6996.xxx.KC 6996.xxx.KC 6938.xxx.RDMInterior Escutcheon 6996.xxx.KT 6996.xxx.KC 6996.xxx.KNKnob/Lever 5117.xxx.MR (Pair) 5117.xxx.MR (Pair) 5117.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Swivel) 0510 (3.5˝ Straight)Cylinder 8322 (1.75˝ Door) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6996.xxx.KC 6996.xxx.KE**Interior Escutcheon 6996.xxx.KT 6996.xxx.KT 6996.xxx.KN (x2)Knob/Lever Pair Pair PairSpindle • • •REQUIRED —Cylinder•Mortise Lock • (Lever Strength) • (Latch or Interior Lock) • (Latch or Interior Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEBISMARKINTERIOR EXT SETItem # Description Wt.6942.xxx.ENTR Entrance Trim Set 3.06942.xxx.DBLC Double Cylinder Set6942.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$375 $4506942.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 750 † 900 †6942.xxx.RDM (LDM) Dummy Exterior only Each 190 220Interior Escutcheon –6986.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6986.xxx.KE** Cut for Emergency Release (KE) Each95 1306986.xxx.KN Cut for Knob (KN), Passage/Dummy Each6986.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.1.8.28.33.9 2.31.81.38.3Sets 6942.xxx.ENTR 6942.xxx.DBLC 6942.xxx.FDExterior Trim 6986.xxx.KC 6986.xxx.KC 6942.xxx.RDMInterior Escutcheon 6986.xxx.KT 6986.xxx.KC 6986.xxx.KN (x2)Knob/Lever 5152.xxx.MR (Pair) 5152.xxx.MR (Pair) 5152.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder 8322 (1.75˝ Door) 8325 (1.75˝ Door)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•3.92.3Trim thickness: .125˝ – CDesigner Entrance Privacy Double CylinderExterior Trim 6986.xxx.KC 6986.xxx.KE**Interior Escutcheon 6986.xxx.KT 6986xxx.KT or .KP 6986.xxx.KN (x2)Knob/Lever Pair Pair PairSpindle • • •REQUIRED —Cylinder•Mortise Lock • • (Latch & Bolt or Lock) • (Latch & Bolt or Interior Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝105**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEPASADENAINTERIOR EXT SETItem # Description Wt.6944.xxx.ENTR Entrance Trim Set 9.56944.xxx.DBLC Double Cylinder Set6944.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264402412452$775 $8506944.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6641.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6641.xxx.BB30 Entrance Back-to-Back – 3˝ door Set1075 11506641.xxx.BBFD Dummy Back-to-Back Set6641.xxx Active Exterior Trim Each6641.xxx.DM Dummy Exterior Trim Each580 625Interior Escutcheon –6714.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6714.xxx.KE** Cut for Emergency Release (KE) Each185 2206714.xxx.KN Cut for Knob (KN), Passage/Dummy Each6714.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.3.3 1.43.4.4113.11938Sets 6944.xxx.ENTR 6944.xxx.DBLC 6944.xxx.FD 6641.xxx.BB75 (BBFD)Exterior Trim 6641.xxx 6641.xxx 6641.xxx.DM 6641.xxx (x2)Interior Escutcheon 6714.xxx.KT 6714.xxx.KC 6714.xxx.KNKnob/Lever 5063.xxx.IMR 5063.xxx.IMR 5063.xxx.IMRSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 0592 (1.125˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • • •Blocking Ring • •2.7Trim width: 3.35˝Trim thickness: .375˝ – GDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6641.xxx 6714.xxx.KC 6714.xxx.KC 6714.xxx.KE**Interior Escutcheon 6714.xxx.KT 6714.xxx.KT 6714.xxx.KC 6714.xxx.KT or .KP 6714.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • (Lever Strength) • • • (Latch & Bolt or Lock) • (Latch or Interior Lock)Blocking Ring • Other- ER TrimTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEVICTORIA / VERSAILLESINT EXT SET EXT SETItem # Description Wt.6948.xxx.RENT (LENT) Entrance Trim – Victoria Set 9.56948.xxx.RDBL (LDBL) Double Cylinder Set6948.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506948.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6956.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Each6956.xxx.BBFD Dummy Back-to-Back Each1075 11506956.xxx Active Exterior Trim only Each6956.xxx.DM Dummy Exterior only Each580 6256933.xxx.ENTR Entrance Trim – Versailles Set6933.xxx.DBLC Double Cylinder Set475 5506933.xxx.FD Full Dummy Set6933.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6933.xxx.RDM (LDM) Dummy Exterior only Each 240 270Interior Escutcheon –6993.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6993.xxx.KE** Cut for Emergency Release (KE) Each185 2206993.xxx.KN Cut for Knob (KN), Passage/Dummy Each6993.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.3 1.32.4.31122.63.75 2.36.5VictoriaSets6948.xxx.RENT(LENT)6948.xxx.RDBL(LDBL)6948.xxx.RFD(LFD)6956.xxx.BB75(BBFD)Exterior Trim 6956.xxx 6956.xxx 6956.xxx.DM 6956.xxx (x2)Interior Escutcheon 6993.xxx.KT 6993.xxx.KC 6993.xxx.KNKnob/Lever 5121.xxx.RMR (.LMR) 5121.xxx.RMR (.LMR) 5121.xxx.RMR (.LMR)Spindle 0531 (2.875˝ Half) 0531 (2.875˝ Half) 5092 (1.125˝ Dummy)Cylinder 8322 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • •Blocking Ring • •2.8Trim width: 2.4˝Trim thickness: .188˝ – DVersaillesSets 6933.xxx.ENTR 6933.xxx.DBLC 6933.xxx.FDExterior Trim 6993.xxx.KC 6993.xxx.KCInterior Escutcheon 6993.xxx.KT 6993.xxx.KC 6993.xxx.KN (x2)Knob/Lever 5121.xxx.MR (Pair) 5121.xxx.MR (Pair) 5121.xxx.MR (Pair)Spindle 0520 (3.5˝ Swivel) 0520 (3.5˝ Swivel) 0510 (3.5˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•REQUIRED —Designer Victoria Entrance Versailles PrivacyExterior Trim 6956.xxx 6993.xxx.KE**Interior Escutcheon 6993.xxx.KT 6993.xxx.KT or .KPKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • (Lever Strength) • (Latch & Bolt or Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝107**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEKENSINGTON / WESTMINSTERINTERIOR EXT SET EXT SET030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Item # Description Wt.6950.xxx.RENT (LENT) Entrance Trim – Kensington Set 9.56950.xxx.RDBL (LDBL) Double Cylinder Set$775 $8506950.xxx.RFD (LFD) Full Dummy Set6950.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6624.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6624.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set1075 11506624.xxx.BBFD Dummy Back-to-Back Set6624.xxx Active Exterior Trim only Each6624.xxx.DM Dummy Exterior only Each580 6256961.xxx.ENTR Entrance Trim – Westminster Set6961.xxx.DBLC Double Cylinder Set475 5506961.xxx.FD Full Dummy Set6961.xxx.ENFD* 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950* 1100*6961.xxx.DM Dummy Exterior only Each 240 270Interior Escutcheon –6790.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6790.xxx.KE** Cut for Emergency Release (KE) Each185 2206790.xxx.KN Cut for Knob (KN), Passage/Dummy Each6790.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606790.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.75.31.52.75 3”.311.21119KensingtonSets6950.xxx.RENT(LENT)6950.xxx.RDBL(LDBL)6950.xxx.RFD(LFD)6624.xxx.BB75(BB30, BBFD)3.9 2.46.5Exterior Trim 6624.xxx 6624.xxx 6624.xxx.DM 6624.xxx (x2)Interior Escutcheon 6790.xxx.KT 6790.xxx.KC 6790.xxx.KNKnob/Lever 5108.xxx.RMR (LMR) 5108.xxx.RMR (LMR) 5108.xxx.RMR (LMR)Trim width: 2.75˝Trim thickness: .3125˝ – FSpindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)2.9Mortise Lock • (Lever Strength) • (Lever Strength) •Blocking Ring • •WestminsterSets 6961.xxx.ENTR 6961.xxx.DBLC 6961.xxx.FDExterior Trim 6790.xxx.KC 6790.xxx.KCInterior Escutcheon 6790.xxx.KT 6790.xxx.KC 6790.xxx.KN (x2)Knob/Lever 5108.xxx.MR (Pair) 5108.xxx.MR (Pair) 5108.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0522 (4˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝REQUIRED —Designer Kensington Entrance Westminster EntranceExterior Trim 6624.xxx 6790.xxx.KE**Interior Escutcheon 6790.xxx.KT 6790.xxx.KT or .KPKnob/Lever Half Pair PairSpindle • •Cylinder • •Mortise Lock • (Lever Strength) • Latch & Bolt, Lock or Latch)Blocking RingTurn KnobMUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISEEDINBURGH / FENWICK®INT EXT SET EXT SETItem # Description Wt.6952.xxx.RENT (LENT) Entrance Trim – Edinburgh Set 9.56952.xxx.RDBL (LDBL) Double Cylinder Set6952.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506952.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6652.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6652.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set1075 11506652.xxx.BBFD Dummy Back-to-Back Set6652.xxx Active Exterior Trim only Each6652.xxx.DM Dummy Exterior only Each580 6256962.xxx.ENTR Entrance Trim – Fenwick Set6962.xxx.DBLC Double Cylinder Set475 5506962.xxx.FD Full Dummy Set6962.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 980 † 1100 †6962.xxx.DM Dummy Exterior only Each 240 270Interior Escutcheon –6789.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6789.xxx.KE** Cut for Emergency Release (KE) Each185 2206789.xxx.KN Cut for Knob (KN), Passage/Dummy Each6789.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606789.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.EdinburghSets6952.xxx.LENT(RENT)6952.xxx.LDBL(RDBL)6952.xxx.LFD(RFD)6652.xxx.BB75(BB30, BBFD)Exterior Trim 6652.xxx 6652.xxx 6652.xxx.DM 6652.xxx (x2)Interior Escutcheon 6789.xxx.KT 6789.xxx.KC 6789.xxx.KNKnob/Lever 5122.xxx.RMR (.LMR) 5122.xxx.RMR (.LMR) 5122.xxx.RMR (.LMR)Spindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy)Cylinder 8324 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Trim width: 3.0˝Trim thickness: .435˝ – HMortise Lock • (Lever Strength) • •Blocking Ring • •FenwickSets 6962.xxx.ENTR 6962.xxx.DBLC 6962.xxx.FDExterior Trim 6789.xxx.KC 6789.xxx.KCInterior Escutcheon 6789.xxx.KT 6789.xxx.KC 6789.xxx.KN (x2)Knob/Lever 5122.xxx.MR (Pair) 5122.xxx.MR (Pair) 5122.xxx.MR (Pair)Spindle 0522 0522 0511Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•REQUIRED —Designer Edinburgh Entrance Fenwick PrivacyExterior Trim 6652.xxx 6789.xxx.KE**Interior Escutcheon 6789.xxx.KT 6789.xxx.KTKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • • Latch & Bolt, Lock or LatchBlocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝109**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEBRISTOLEXT SET EXT SETItem # Description Wt.6963.xxx.RENT (LENT) Entrance Trim – Bristol Set 9.56963.xxx.RDBL (LDBL) Double Cylinder Set6963.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506963.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6627.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6627.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set1075 11506627.xxx.BBFD Dummy Back-to-Back Set6627.xxx Active Exterior Trim only Each6627.xxx.DM Dummy Exterior only Each580 6256939.xxx.ENTR Entrance Trim – Bristol Lever Set Set6939.xxx.DBLC Double Cylinder Set475 5506939.xxx.FD Full Dummy Set6939.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6939.xxx.RDM (LDM) Dummy Exterior only Each 240 270NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.751.43.4 .51115.93.72.462.6Trim thickness: .375˝ – GSets6963.xxx.LENT(RENT)6963.xxx.LDBL(RDBL)6963.xxx.LFD(RFD)6627.xxx.BB75(BB30, BBFD)Exterior Trim 6627.xxx 6627.xxx 6627.xxx.DM 6627.xxx (x2)Interior Escutcheon 6991.xxx.KT 6991.xxx.KC 6991.xxx.KNKnob/Lever 5104.xxx.RMR (LMR) 5104.xxx.RMR (LMR) 5104.xxx.RMR (LMR)Spindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy) •Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength) •Blocking Ring • •Sets 6939.xxx.ENTR 6939.xxx.DBLC 6939.xxx.FDExterior Trim 6991.xxx.KC 6991.xxx.KC 6939.xxx.RDMInterior Escutcheon 6991.xxx.KT 6991.xxx.KC 6991.xxx.KNKnob/Lever 5104.xxx.MR (Pair) 5104.xxx.MR (Pair) 5104.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in greyREQUIRED —Designer Entrance PrivacyExterior Trim 6627.xxx 6991.xxx.KE**Interior Escutcheon 6991.xxx.KT 6991.xxx.KT or .KPKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • •Blocking RingTurn Knob

ENTRANCE TRIM, MORTISEBARCLAYINTERIOR EXT SETItem # Description Wt.6554.xxx.ENTR Entrance Trim – Barclay (Knob) Set Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526554.xxx.DBLC Double Cylinder Set475 $5506554.xxx.FD Full Dummy Set6554.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6554.xxx.DM Dummy Exterior only Each 240 270Interior Escutcheon –6991.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6991.xxx.KE** Cut for Emergency Release (KE) Each185 2206991.xxx.KN Cut for Knob (KN), Passage/Dummy Each6991.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 2606991.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.Trim thickness: .375˝ – GSets 6554.xxx.ENTR 6554.xxx.DBLC 6554.xxx.FDExterior Trim 6991.xxx.KC 6991.xxx.KCInterior Escutcheon 6991.xxx.KT 6991.xxx.KC 6991.xxx.KN (x2)Knob/Lever 5064.xxx.MR (Pair) 5064.xxx.MR (Pair) 5064.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder 8323 (1.75˝ Door) • (Double)Mortise Lock • (Knob Strength) • (Knob Strength)Blocking Ring•REQUIRED —DesignerExterior TrimInterior EscutcheonKnob/LeverSpindleCylinderMortise LockBlocking RingPassage6991.xxx.KN6991.xxx.KNPair•• (Latch or Interior LockTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝111**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISELAKESHOREINTERIOR EXT SET EXT SETItem # Description Wt.6966.xxx.RENT (LENT) Entrance Trim – Lakeshore Set 5.06966.xxx.RDBL (LDBL) Double Cylinder Set6966.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$775 $8506966.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6553.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6553.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set1075 11506553.xxx.BBFD Dummy Back-to-Back Set6553.xxx Active Exterior Trim only Each6553.xxx.DM Dummy Exterior only Each580 6256974.xxx.ENTR Entrance Trim – Lakeshore Lever Set Set 3.56974.xxx.DBLC Double Cylinder Set475 5506974.xxx.FD Full Dummy Set6974.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6974.xxx.RDM (LDM) Dummy Exterior only Each 240 270Interior Escutcheon –6502.xxx.KCOS (KCIS) Cut for Cylinder (KC), Double Cylinder Each6502.xxx.KEOS (KEIS) Cut for Emergency Release (KE) Each185 2206502.xxx.KNOS (KNIS) Cut for Knob (KN), Passage/Dummy Each6502.xxx.KTOS (KTIS) Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.1.81≤(46mm)0.51≤(13mm)0.40≤(10.2mm)1.07≤(27.2mm)10.00≤(254mm)17.34≤(440.4mm)4.46≤(113.3mm)Sets6966.xxx.RENT(LENT)6966.xxx.RDBL(LDBL)6966.xxx.RFD(LFD)6553.xxx.BB75(BB30, BBFD)Exterior Trim 6553.xxx 6553.xxx 6553.xxx.DM 6553.xxx (x2)Interior Escutcheon 6502.xxx.KTIS 6502.xxx.KCIS 6502.xxx.KNISKnob/Lever 5162.xxx.LMR (.RMR) 5162.xxx.LMR (.RMR) 5162.xxx.LMR (.RMR)Spindle 0530 (2.375˝ Half) 0531 (2.375˝ Half) 5092 (1.5˝ Dummy)Cylinder 8323 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength) •Blocking Ring • •6.50≤(165.1mm2.55≤(64.8mm)2.65≤(67.3mm)1.00≤(25.4mm)1.00≤(25.4mm)Trim thickness: .375˝ – GSets 6974.xxx.ENTR 6974.xxx.DBLC 6974.xxx.FDExterior Trim 6502.xxx.KCOS 6502.xxx.KCOS 6502.xxx.KNOSInterior Escutcheon 6502.xxx.KTIS 6502.xxx.KCIS 6502.xxx.KNISKnob/Lever 5162.xxx.MR (Pair) 5162.xxx.MR (Pair) 5162.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Straight)Cylinder • • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝REQUIRED —Designer Entrance PrivacyExterior Trim 6553.xxx 6502.xxx.KEOS**Interior Escutcheon 6502.xxx.KTIS 6502.xxx.KTISKnob/Lever Half Pair PairSpindle • •Cylinder•Mortise Lock • (Lever Strength) • (Latch & Bolt or Lock)Blocking RingTurn KnobMUST ORDER SEPERATELYshown in grey**(All .KE hardware include 6701 ER cover)

ENTRANCE TRIM, MORTISEHOUSTONINTERIOR EXT SETItem # Description Wt.6973.xxx.ENTR Entrance Trim Set 4.06973.xxx.DBLC Double Cylinder Set6973.xxx.FD Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506973.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6973.xxx.RDM (LDM) Dummy Exterior only Each 240 270Interior Escutcheon –6506.xxx.KCOS (KCIS) Cut for Cylinder (KC), Double Cylinder Each6506.xxx.KEOS (KEIS) Cut for Emergency Release (KE) Each185 2206506.xxx.KNOS (KNIS) Cut for Knob (KN), Passage/Dummy Each6506.xxx.KTOS (KTIS) Interior Escutcheon w/ Turn Knob (KT) Each 220 2606506.xxx.KP Escutcheons Cut for Privacy (KP) Pair 370 440NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.25≤(57.2mm)3.44≤(87.3mm)9.65≤(245.2mm)5.58≤(141.8mm)Trim thickness: .435˝ – HSets 6973.xxx.ENTR 6973.xxx.DBLC 6973.xxx.RFD (LFD)Exterior Trim 6506.xxx.KCOS 6506.xxx.KCOS 6506.xxx.KNOSInterior Escutcheon 6506.xxx.KTIS 6506.xxx.KCIS 6506.xxx.KNISKnob/Lever 5164.xxx.MR (Pair) 5164.xxx.MR (Pair) 5164.xxx.MR (Pair)Spindle 0522 (4˝ Swivel) 0522 (4˝ Swivel) 0511 (4˝ Swivel)Cylinder 8324 (1.75˝ Door) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength)Blocking Ring•Designer Entrance Privacy PassageExterior Trim 6506.xxx.KCOS 6506.xxx.KEOS 6506.xxx.KNOSInterior Escutcheon 6506.xxx.KTIS 6506.xxx.KTIS 6506.xxx.KNISKnob/Lever Pair Pair PairSpindle • • •REQUIRED —Cylinder•Mortise Lock • • (Latch & Bolt, Lock, or Latch) • (Latch or Interior Lock)Blocking RingTurn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝113**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISEMINNEAPOLISINTERIOR EXT SETItem # Description Wt.6976.xxx.RENT (LENT) Entrance Trim Set 5.56976.xxx.RDBL (LDBL) Double Cylinder Set6976.xxx.RFD (LFD) Full Dummy Set030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$475 $5506976.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 950 † 1100 †6620.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6620.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set775 8506620.xxx.BBFD Dummy Back-to-Back Set6620.xxx Active Exterior Trim Each6620.xxx.DM Dummy Exterior Trim Each355 400Interior Escutcheon –6513.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6513.xxx.KE** Cut for Emergency Release (KE) Each95 1306513.xxx.KN Cut for Knob (KN), Passage/Dummy Each6514.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 130 170NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.Sets6976.xxx.RENT(LENT)6976.xxx.RDBL(LDBL)6976.xxx.RFD(LFD)6620.xxx.BB75(BB30, BBFD)Exterior Trim 6620.xxx 6620.xxx 6620.xxx.DM 6620.xxx (x2)Interior Escutcheon 6514.xxx.KT 6513.xxx.KC 6513.xxx.KNKnob/Lever 5190.xxx.LMR (RMR) 5190.xxx.LMR (RMR) 5190.xxx.LMR (RMR)Spindle 0530 (2.375˝ Half) 0533 (2.25˝ Half) 5092 (1.5˝ Dummy)Cylinder 8323 (1.75˝ Door) 8323 (1.75˝ Door) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • •Blocking Ring • •Trim width: 2.25˝Trim thickness: .375˝ – GDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6620.xxx 6513.xxx.KC 6513.xxx.KC 6513.xxx.KE**Interior Escutcheon 6514.xxx.KT 6514.xxx.KT 6513.xxx.KC 6514.xxx.KT 6513.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • • (Lever Strength) • (Lever Strength) • (Latch & Bolt or Lock) • (Latch or Interior Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝MUST ORDER SEPERATELY**(All .KE hardware include 6701 ER cover)shown in grey

ENTRANCE TRIM, MORTISERICHLAND®INTERIOR EXT SETItem # Description Wt.6999.xxx.RENT (LENT) Entrance Trim Set 9.5030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4526999.xxx.RDBL (LDBL) Double Cylinder Set$775 $8506999.xxx.RFD (LFD) Full Dummy Set6999.xxx.ENFD † 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1550 † 1700 †6690.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set6690.xxx.BBFD Entrance Back-to-Back Set1075 11506690.xxx Active Exterior Trim Each6690.xxx.DM Dummy Exterior Trim Each580 625Interior Escutcheon –6709.xxx.KC Cut for Cylinder (KC), Double Cylinder Each6709.xxx.KE** Cut for Emergency Release (KE) Each185 2206709.xxx.KN Cut for Knob (KN), Passage/Dummy Each6709.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 220 260NOTE: 030 is not available with Entry Trim or KC escutcheons†.ENFD only available in 050, 112 & 190, to ensure a finish match on all components.2.91.52.9 .61116.33.9 2.65.752.2Sets6999.xxx.RENT(LENT)6999.xxx.RDBL(LDBL)6999.xxx.RFD(LFD)6690.xxx.BB75(BBFD)Exterior Trim 6690.xxx 6690.xxx 6690.xxx.DM 6690.xxx (x2)Interior Escutcheon 6709.xxx.KT 6709.xxx.KC 6709.xxx.KNKnob/Lever 5190.xxx.RMR (LMR) 5190.xxx.RMR (LMR) 5190.xxx.RMR (LMR)Spindle 0530 (2.375˝ Half) 0530 (2.375˝ Half) 5092 (1.125˝ Dummy) 5092 (1.125˝ Dummy)Cylinder 8324 (1.75˝ Door) • (Double) 6761 (Dummy) • (Double)Mortise Lock • (Lever Strength) • (Lever Strength) •Blocking Ring • •Trim width: 2.9˝Trim thickness: .435˝ – HDesigner Entrance Entrance Double Cylinder Privacy PassageExterior Trim 6690.xxx 6709.xxx.KC 6709.xxx.KC 6709.xxx.KE**Interior Escutcheon 6709.xxx.KT 6709.xxx.KT 6709.xxx.KC 6709.xxx.KT 6709.xxx.KN (x2)Knob/Lever Half Pair Pair Pair Pair PairSpindle • • • • •REQUIRED —Cylinder • • • (Double)Mortise Lock • • (Lever Strength) • (Lever Strength) • (Latch & Bolt or Lock) • (Latch & Interior Lock)Blocking Ring•Turn KnobSEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝115**(All .KE hardware include 6701 ER cover)MUST ORDER SEPERATELYshown in grey

ENTRANCE TRIM, MORTISECODY | BOULDERCody ¾˝ Escutcheon Trimw/ 5024 knob or 5452V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452.LENT or .RENT9.25˝3.0˝.53˝9.25˝.53˝M502.xxx.ENTRM502.xxx.FDM502.xxx.LENTM502.xxx.RENTM502.xxx.RFDM502.xxx.LFDCody ¾ Escutcheon w/ Knob – EntryCody ¾ Escutcheon w/ Knob – DummyCody ¾ Escutcheon w/ Lever – LH EntryCody ¾ Escutcheon w/ Lever – RH EntryCody ¾ Escutcheon w/ Lever – RH DummyCody ¾ Escutcheon w/ Lever – LH Dummy$575 $650.ENTR17.25˝8.0˝ 3.0˝2.98˝Lock and cylinder must be purchased separately.Trim thickness: .53” - H12.5˝2.5˝Cody Full Escutcheon Trimw/ 5024 knob or 5452V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452M504.xxx.ENTR Cody Full Escutcheon w/ Knob – Entry.LENT or .RENT.ENTR3.0˝17.88˝.53˝9.25˝.53˝M504.xxx.FD Cody Full Escutcheon w/ Knob – DummyM504.xxx.LENT Cody Full Escutcheon w/ Lever – LH EntryM504.xxx.RENT Cody Full Escutcheon w/ Lever – RH EntryM504.xxx.RFD Cody Full Escutcheon w/ Lever – RH DummyM504.xxx.LFD Cody Full Escutcheon w/ Lever – LH DummyLock and cylinder must be purchased separately.Trim thickness: .53” - H1$575 $6508.0˝3.0˝2.98˝3.42˝Boulder ¾˝ Escutcheon Trimw/ 5024 knob or 5452V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452.LENT or .RENT3.0˝11.21˝.M512.xxx.ENTRM512.xxx.FDM512.xxx.LENTM512.xxx.RENTM512.xxx.RFDM512.xxx.LFDBoulder ¾ Escutcheon w/ Knob – EntryBoulder ¾ Escutcheon w/ Knob – DummyBoulder ¾ Escutcheon w/ Lever – LH EntryBoulder ¾ Escutcheon w/ Lever – RH EntryBoulder ¾ Escutcheon w/ Lever – RH DummyBoulder ¾ Escutcheon w/ Lever – LH Dummy$575 $65011.21˝Lock and cylinder must be purchased separately..ENTR18.54˝Trim thickness: .53” - H18.0˝3.0˝4.11˝2.633.25˝2.39˝3.42˝Boulder Full Escutcheon Trimw/ 5024 knob or 5452V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452.ENTR.53˝11.21˝.53˝M514.xxx.ENTRM514.xxx.FDM514.xxx.LENTM514.xxx.RENTM514.xxx.RFDM514.xxx.LFDBoulder Full Escutcheon w/ Knob – EntryBoulder Full Escutcheon w/ Knob – DummyBoulder Full Escutcheon w/ Lever – LH EntryBoulder Full Escutcheon w/ Lever – RH EntryBoulder Full Escutcheon w/ Lever – RH DummyBoulder Full Escutcheon w/ Lever – LH Dummy$575 $650.LENT or .RENT18.03˝8.0˝3.0˝4.11˝2.63˝Lock and cylinder must be purchased separately.Trim thickness: .53” - H13.0˝3.42˝

ENTRANCE TRIM, MORTISEBETHPAGE | SOHO | ORDERING MORTISEBethpage ® ¾˝ Escutcheon Trimw/ 5077 knob or 5447V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452.LENT or .RENT.ENTRM522.xxx.ENTRBethpage ¾ Escutcheon w/ Knob – EntryM522.xxx.FD Bethpage ¾ Escutcheon w/ Knob – DummyM522.xxx.LENT Bethpage ¾ Escutcheon w/ Lever – LH EntryM522.xxx.RENT Bethpage ¾ Escutcheon w/ Lever – RH EntryM522.xxx.RFD Bethpage ¾ Escutcheon w/ Lever – RH DummyM522.xxx.LFD Bethpage ¾ Escutcheon w/ Lever – LH DummyM522.xxx.BB75M522.xxx.BB30M522.xxx.BBFDBethpage ¾ Escutcheon Back-to-Back –1.75˝ doorBethpage ¾ Escutcheon Back-to-Back –up to 3˝ doorBethpage ¾ Escutcheon Back-to-Back –Dummy$575 $650875 950Lock and cylinder must be purchased separately.Trim thickness: .53” - H1Soho ¾˝ Escutcheon Trimw/ 5485V leverItem #Description031, 050, 102112, 150, 151190, 260, 264003, 055056, 402412, 452M516.xxx.LENT Soho Single Point Escutcheon w/ Lever – LH Entry.LENT or .RENTM516.xxx.RENT Soho Single Point Escutcheon w/ Lever – RH EntryM516.xxx.RFD Soho Single Point Escutcheon w/ Lever – RH DummyM516.xxx.LFD Soho Single Point Escutcheon w/ Lever – LH DummyM516.xxx.BB75M516.xxx.BB30M516.xxx.BBFDSoho Single Point Escutcheon Back-to-Back –1.75˝ doorSoho Single Point Escutcheon Back-to-Back –up to 3˝ doorSoho Single Point Escutcheon Back-to-Back –Dummy$575 $650875 950Lock and cylinder must be purchased separately.Trim thickness: .53” - H1ORDERING MORTISEEXAMPLE:M502 . XXX . ENTRM = MORTISE FUNCTION XXX = FINISH ENTR = ENTRANCE FUNCTION,502 = CODY ¾ PLATE TRIM W/ OVAL KNOBStep 3. Pick Your Cylinder:Door Thickness 1.375˝ (35mm) 1.75˝ (44mm) 2˝ (51mm) 2.25˝ (57mm)Cylinder Length 1.25˝ 1.5˝ 1.625˝ 1.75˝Single Cylinder 8323.xxx 8325.xxx 8326.xxx 8327.xxxDouble Cylinder* 8323.xxx.DBL 8325.xxx.DBL 8326.xxx.DBL 8327.xxx.DBLBlocking Ring 8440.xxx.001 - 8440.xxx.001 8440.xxx.001**NOTE: For doors > 1.75˝ thick and 2.25˝ thick, use Thick Door Kit 6501.000.C*Double cylinder for use on back-to-back sets.**Two blocking rings required.Step 1. Pick Your Handleset Trim, w/ knob or lever:M502 – Cody ¾ Escutcheon TrimM512 – Boulder ¾ Escutcheon TrimM504 – Cody Full Escutcheon TrimM514 – Boulder Full Escutcheon TrimStep 2. Pick Your Mortise Box:KNOBLEVERMortiseBackset Door Thickness Function Box Handing Part Number Handing Part Number2.75˝ 1.75˝ and up Residential Entrance 6020 R 6020.xxx.R RLS 6020.xxx.RLSL 6020.xxx.L LLS 6020.xxx.LLSRR 6020.xxx.RR RRLS 6020.xxx.RRLSLR 6020.xxx.LR LRLS 6020.xxx.LRLS2.75˝ 1.75˝ and up Residential Entrance 6021 R 6021.xxx.R RLS 6021.xxx.RLSEmergency Egress L 6021.xxx.L LLS 6021.xxx.LLSRR 6021.xxx.RR RRLS 6021.xxx.RRLSLR 6021.xxx.LR LRLS 6021.xxx.LRLS2.75˝ 1.75˝ and up Entrance Back-to-Back 6025 - - - -2.5˝ 1.375 /1.75 and up Residential Entrance 6320 R 6320.xxx.R RLS 6320.xxx.RLSL 6320.xxx.L LLS 6320.xxx.LLSRR 6320.xxx.RR RRLS 6320.xxx.RRLSLR 6320.xxx.LR LRLS 6320.xxx.LRLS2.5˝ 1.375/1.75 and up Residential Entrance 6321 R 6321.xxx.R RLS 6321.xxx.RLSEmergency Egress L 6321.xxx.L LLS 6321.xxx.LLSRR 6321.xxx.RR RRLS 6321.xxx.RRLSLR 6321.xxx.LR LRLS 6321.xxx.LRLS2.5˝ 1.375/1.75 and up Entrance Back-to-Back 6325 - - - -Right hand = R Right hand reverse bevel = RR Right hand lever strength = RLS Right hand reverse bevel lever strength = RRLSLeft hand = L Left hand reverse bevel = LR Left hand lever strength = LLS Left hand reverse bevel lever strength = LRLS117

THICK DOOR KITS1.75˝– 2.25˝ STEEL DOORS (MORTISE)Give your doors of distinction the hardware to match withBaldwin luxury entrysets—now easily compatible with customdecorative iron/steel doors in a wide range of thicknesses.>Kits available for doors 1.5˝ to 2.25˝ thick>Mortise and tubular options available>Choose from dozens of Baldwin styles>Easy to implementFINISH EQUIVALENCIESFINISH EQUIVALENCY GRID*Trim Finish Kit Finish Trim Finish Kit Finish Trim Finish Kit Finish Trim Finish Kit Finish003 = 221 050 = 102 112 = 112 260 = 140030 = 221 055 = 140 140 = 140 264 = 140031 = 221 056 = 140 150 = 140 402 = 102033 = 221 060 = 221 151 = 151 412 = 112040 = 221 102 = 102 190 = 102 452 = 151*Does not apply to 6501 A-C kits due to blocking ringsTHICK DOOR KITS1.75˝ to 2.25˝ door thickness mortise handlesetsMORTISE HANDLESETS, STEEL DOORKit For Entrance Trim #6599.XXX.THKA Monterey (6565, .0937˝)6599.XXX.THKB6599.XXX.THKC6599.XXX.THKD6599.XXX.THKE6599.XXX.THKF6599.XXX.THKG6599.XXX.THKH6599.XXX.THKI6599.XXX.THKJ6599.XXX.THKK6599.XXX.THKLVictoria (6948, .1875˝), Kensington (6950, .3125˝)San Diego (6540, .0937˝), Lancaster (6543, .0937˝),Richmond (6557, .0937˝), Dallas (6931, .0937˝)Bristol (6963, .375˝), Concord (6571, .25˝)Springfield (6573, .3125˝), Lexington (6560, .3125˝),Atlanta (6570, .375˝), Minneapolis (6976, .375˝),Boulder (M512/M514, .53˝), Cody (M502/M504, .53˝),Trenton (6567, .1875˝), Pasadena (6944, .375˝)Williamsburg (6549, .3125˝)New York (6562, .25˝)Chicago (6563, .0937˝)Edinburgh (6952, .435˝), Richland (6999, .435˝)Edinburgh Sectional (6515, .5625˝),Oval Edinburgh (6516, .5625˝),Bristol Sectional (6520, .5625˝),3/4 Kensington (6526, .5625˝)Hamilton (6544, .75˝), Tremont (6542, .75˝)Lakeshore (6966, .396˝)102, 112140, 151, 221$22MORTISE HANDLESETS, WOOD DOORKit For Entrance Trim # Price6501.000.A 6515, 6520, 6526, 6540, 6541, 6543, 6549, 6556,6557, 6560, 6564, 6565, 6567, 6568, 6570, 6571,6572, 6573, 6931, 6946, 6948, 6950, 6963, 6976active & dummy$66501.000.B 6548, 6562, 6563, active & dummy 206501.000.C 6944, 6952, 6999 active & dummy, M502, M504,M512, M514, M516, M522306501.000.D 6542, 6544, 6545 ACTIVE ONLY 186501.000.E 6542, 6544, 6545 DUMMY ONLY 226501.000.F 6966 26REQUIRED for all doors over 1.75˝ and up to 2.25˝ thick Thick Door Kits are for HandlesetsONLY, not Entrance Sets (Entrance sets are knob x knob or lever x lever)REQUIRED for all doors over 1.75˝ and up to 2.25˝ thick Thick Door Kits are for Handlesets ONLY,not Entrance Sets (Entrance sets are knob x knob or lever x lever)

THIN DOOR KITS1.5˝– 1.625˝ STEEL DOORS (MORTISE & TUBULAR)THIN STEEL DOOR KITS – Mortise1.5˝ to 1.625˝ Door Thickness Mortise HandlesetsItem # For Entrance Trim #6501.XXX.15A San Diego (6540, .0937”), Lancaster (6543, .0937”),Richmond (6557, .0937”), Dallas (6931, .0937”)030, 031,033, 034, 040050, 060, 102112, 150, 151190, 260, 2646501.XXX.15B Monterey (6565, .0937”) $406501.XXX.15C Chicago (6563, .0937) $30003, 055056, 402412, 452$40 $45Item # For Entrance Trim #6501.XXX.15D Victoria (6948, .1875”), Kensington (6950, .3125”),Edinburgh (6952, .435”)037, 102112, 140151, 2216501.XXX.15E Trenton (6567, .1875”), Concord (6571, .25”) $306501.XXX.15G New York (6562, .25”) $256501.XXX.15H Williamsburg (6549, .3125”) $306501.XXX.15I Springfield (6573, .3125”), Lexington (6560, .3125”),Atlanta (6570, .375”), Minneapolis (6976, .375”),Boulder (M512/M514, .53”),$30Cody (M502/M504, .53”)6501.XXX.15J Lakeshore (6966, .396”) $306501.XXX.15L Richland (6999, .435”) $356501.XXX.15M Pasadena (6944, .375”) $356501.XXX.15N Bristol (6963, .375”),Edinburgh Sectional (6515, .5625”),Oval Edinburgh (6516, .5625”),$30Bristol Sectional (6520, .5625”),¾ Kensington (6526, .5625”)6501.XXX.15O Hamilton (6544, .75”), Tremont (6542, .75”) $35$30REQUIRED for all doors 1.5˝ and up to 1.625˝ thick Thin Door Kits are for Handlesets ONLY, not EntranceSets (Entrance sets are knob x knob or lever x lever)THIN STEEL DOOR KITS – Tubular1.5˝ Door Thickness Tubular HandlesetsItem # For Entrance Trim #5397.XXX.15A Handleset w/ KNOB: Bethpage (85327),Buckingham (85380), Canterbury (85305),Glennon (85375), Logan (85305 & 85315),Madison (85320) & Nantucket (85370)5397.XXX.15B Handleset w/ LEVER: Bethpage (85327),Buckingham (85380), Canterbury (85305),Glennon (85375), Logan (85305 & 85315),Madison (85320) & Nantucket (85370)5397.xxx.15C Tahoe w/ KNOB (85325)5397.xxx.15D Tahoe w/ LEVER (85325)5397.xxx.15E EGRESS: Bethpage 3/4 (85337), Blakely (85360),Boulder (85354), Cody (85352),Manchester (85350), Stonegate (85335)5397.xxx.15F EGRESS: Bristol (6420), Boulder (6402), Cody (6403),Devonshire (6401), Edinburgh (6415 & 6416),Kensington (6426)5397.xxx.15G EGRESS: Tahoe 3/4 (85340)030, 031050, 102112, 150151, 190260, 264003, 055056, 402412, 452$50 $55119

MORTISE LOCKSSPECIFICATIONS2.75˝ Backsetfor doors 1.75˝ thick and over2.5˝ Backsetfor doors 1.375˝ thick and over1.5˝ & 2˝ Backsetfor doors 1.375˝ thick and overBACKSET:2.75˝ – for doors 1.75˝ thick and over STEEL CASE: .875˝ × 4˝ × 5.5˝(22 × 102 × 140mm)2.5˝ – for doors 1.375˝ thick and over, STEEL CASE: .75˝ × 3.5˝ × 5.5˝1.375˝ doors REQUIRE 1˝ FRONT(19 × 89 × 140mm)1.5˝ (38mm) and 2˝ (51mm) NarrowBackset – for doors 1.375˝ thick and overSTEEL CASE: 1.5˝ Backset:.75˝ × 1.5˝ × 5.5˝(19 × 64 × 140mm)2.0˝ Backset:.75˝ × 3˝ × 5.5˝(19 × 76 × 140mm)LOCK SPECIFICATIONS:> Standardized heavy steel case is smooth, easy to mortise, and assures snug and solid fit indoor mortise.> Vital interior working parts are made of solid hot forged brass or steel for a lifetime oftrouble-free operation.> All lock cases are constructed of heavy gauge steel (.093–2.4mm - material) and plated witha protective rust-resistant coating to retard oxidation.> All locks and strikes are designed to fit standard preparation ANSI A115.1 (face cutouts aresubject to variation).> Locks have adjustable forged brass lock fronts, protected by armored scalp fronts for ultimateStrength and protection against tampering.> All KEYED lock functions illustrated within this section are furnished with a specially-designedsecurity strike constructed of high grade steel for ultimate Strength and durability. Thesecurity strike is mortised into the wood jamb and anchored to the structural componentsof the opening with two 3˝ steel screws and covered with a finished strike to conceal thefasteners.> Most lock functions are completely reversible in the field to facilitate installation> The bevel of front is adjustable from flat to standard bevel .125˝on 2˝ (3mm on 51mm).> Most metal door and frame manufacturers have provided reinforcements for Baldwin MortiseLocks.FRONT: Hot forged brass .218˝ × 1.25˝ × 8˝ (6 × 32 × 203mm). Adjustable for beveled conditions.SCALP: Wrought brass and bronze, available in standard finishes.ANTI-FRICTION LATCH BOLT: Furnished with all 2.75˝ and 2.5˝ backset locks2.75˝ – .625˝ × 1˝ (16 × 25mm) × .75˝ (19mm) throw.2.5˝ – .5˝ × 1˝ (13 × 25mm) × .75˝ (19mm) throwFurnished in US4 and 26D finishes to match trimSOLID LATCH BOLT: All 1.5˝ (38mm) and 2˝ (51mm) backset locks are furnished standard with asolid latch bolt of .5˝ (13mm) throw and 1˝ (25mm) wide front. An optional1.25˝ (32mm) wide front is available.DEADBOLT: 2.5˝ and 2.75˝ backsets equipped with a 1˝ (25mm) throw deadbolt with twohardened steel inserts for maximum protection and security. All deadbolts are offorged brass construction. Locks designed with 1.5˝ (38mm) and 2˝ (51mm)backsets have a .5˝ (13mm) throw deadbolt.Furnished in US4 and 26D finishes to match trim.HUB SIZE: .29˝ (7mm) with two-way rotation. Broached on the diamond.(One-way rotation on LS functions).SPACING: center to center of: Knob Hub to cylinder 3.437˝ (87mm)Knob Hub to turn piece 2.25˝ (57mm)CYLINDER: Standard mortise type with 03 keyway and two nickel silver keys.Cylinder is not supplied with lock.KEYING: All levels of Keying including Construction Keying are available.STRIKE: Wrought brass and bronze finished to match. Supplied to ANSI standard A115.1, 1.25˝(32mm) lip to center. Locks furnished standard with straight lip strike (Universal)and dust box. Curved lip and special length strikes available. All KEYED lock functionsare furnished standard with a high grade steel security strike and two 3˝ steel screws.TEMPLATE: Metal doors/frames to be prepared in accordance with ANSI A115.1 or A115.11.Face cutouts are subject to variation. always review trim requirements beforedoor preparation.WARNING: 1.5˝ AND 2.0˝ BACKSET LOCKS ARE designed to be used with levers. If knobs arespecified, customer should be advised that the knob will only turn in one direction and will have astiff turning action: NOT RECOMMENDED.All 2.5˝ and 2.75˝ Entrance Mortise Locks are U/L ListedBaldwin UL-listed 2.5˝ and 2.75˝ mortise locks meet US standard UL-10C and Canadian standardCAN4 S104-M80for survival of a 3-hour burn under positive pressure.All Baldwin Estate Collection mortise entry trim and Estate Collection knob/lever trim may be usedwith Baldwin UL-listed mortise locks.

MORTISE LOCKSSPECIFICATIONS | HOW TO ORDERTrimSymbol Description2.75˝ BACKSET(Handle Sets,Knobs & Levers)ENTR Entrance Function 6001, 6010, 6020,6021, 6070, 6075,6077, 6091SGLC Single Cylinder Function 6051, 6053, 6060,6065, 6066, 61302.5˝ BACKSET(Handle Sets,Knobs & Levers)6301, 6310, 6320,6321, 63752˝ BACKSET(Handle Sets& Levers)1.5˝ BACKSET(Handle Sets& Levers)6802, 6812, 6832 6800, 6810, 6830— — —EXTR Exterior Patio Function 6055, 6100 6315 6847 6845PRIV Privacy Function 6055, 6100 6315 6847 6845PASS Passage Function 6110 6318 6857 6855BB75 Back To Back Handle Sets 6025 6325 — —NOTE: Entrance function locks may be used in either single cylinder or double cylinder applications.TO ORDER: 2.75˝/2.5˝ backset locks for levers, specify LS (Lever Strength) after lock number(i.e. 6375.030.RLS LOCK - RH).NOTE: 1.5˝ and 2.0˝ Backset Locks are designed to be used with levers. If knobsare specified, customer should be advised that the knob will only turn in onedirection and will have a stiff turning action: NOT RECOMMENDED.CURVED LIP STRIKES: Locks may be ordered with curved lip strikes. The hand of strike willmatch the hand of the door. Please specify hand of door when ordering. A left hand reversedoor will use a right hand strike and a right hand reverse door will use a left hand strike.* Optional 1˝ (25mm) front with .75˝ (19mm) solid latch bolt available for doors of1.375˝ (35mm) in thickness. Furnished standard with a curved lip strike.HOW TO ORDER MORTISE LOCKS1. All Mortise Locks have a handed Suffix (.R or .L)2. All Mortise Locks are either Knob Strength(no addition to Suffix) or Lever Strength(LS added to the Suffix)SUFFIX CHARTSuffix Minus Strike With 1˝ Front*Right hand .R .RDT .R1DTLeft hand .L .LDT .L1DTRight hand Reverse bevel .RR .RRDT .RR1DTLeft hand Reverse bevel .LR .LRDT .LR1DTRight hand Lever Strength .RLS .RLSDT .RLS1DTLeft hand Lever Strength .LLS .LLSDT .LLS1DTRight hand Reverse bevel Lever Strength.RRLS . RRLSDT .RRLS1DTLeft hand Reverse bevel Lever Strength .LRLS . LRLSDT .LRLS1DT*Applies to 2.5˝ backset locks. For 1˝ Front DT Distinguishes minus strike. If ordering withstrike, do not include the DT note.WARNING: DO NOT USE Lever Strength mortiselocks with knobs. They only turn one way and have astiff turning action suitable for levers.3. Other Mortise Lock options:Reverse Bevel doors (RR or LR)Minus Strike (DT), when an Extended Lip Strike isneeded (order Strike separately) Optional 1˝ Front(1) for 1.375˝ doors4. ALWAYS REVIEW SUFFIX CHART!121

MORTISE LOCKSENTR ANCE FUNCTIONSList of available handling optionsSuffix*Right hand .RLeft hand .LRight hand Reverse bevel.RRLeft hand Reverse bevel.LRRight hand Lever Strength.RLSLeft hand Lever Strength.LLSRight hand Reverse bevel Lever Strength .RRLSLeft hand Reverse bevel Lever Strength .LRLSRight hand Reverse bevel Lever Strength .RRB1with 1˝ FrontLeft hand Reverse bevel Lever Strength .LRB1with 1˝ FrontSpindle KeyItem # Description Backset Wt.030, 031, 033,034, 040, 050, 060102, 112, 150, 151Std. Strike 152, 190, 260, 2646001.xxx.Suffix* Entrance/Apartment Knob x Knob/Lever x Lever 2.75˝ 3.0 60406020.xxx.Suffix* Residential Entrance Handleset x Knob/Lever 2.75˝ 3.0 60406021.xxx.Suffix* Entrance – Emergency Egress Handleset x Knob/Lever 2.75˝ 3.0 60406025.xxx.Suffix* Entrance Back-to-Back Handleset x Handleset 2.75˝ 3.0 60406066.xxx.Suffix* Electrified Strike Entrance Handleset x Knob/Lever 2.75˝ 2.8 N/A6075.xxx.Suffix* Entrance – Emergency Egress Knob x Knob/Lever x Lever 2.75˝ 3.0 60406077.xxx.Suffix* Entrance - Emergency Egress Knob x Knob/Lever x Lever 2.75˝ 3.0 6043w/ Auxiliary Latch6301.xxx.Suffix* Entrance/Apartment Knob x Knob/Lever x Lever 2.5˝ 3.0 63406310.xxx.Suffix* Entrance/Storeroom Knob x Knob/Lever x Lever 2.5˝ 3.0 63406320.xxx.Suffix* Residential Entrance Handleset x Knob/Lever 2.5˝ 3.0 63406321.xxx.Suffix* Entrance – Emergency Egress Handleset x Knob/Lever 2.5˝ 3.0 63406325.xxx.Suffix* Entrance Back-to-Back Handleset x Handleset 2.5˝ 3.0 63406375.xxx.Suffix* Entrance – Emergency Egress Knob x Knob/Lever x Lever 2.5˝ 3.0 6340003055056$330 $350$330 $3506800.xxx.Suffix* Entrance/Apartment Lever x Lever 1.5˝ 3.0 63406802.xxx.Suffix* Entrance/Apartment Lever x Lever 2˝ 3.0 63406810.xxx.Suffix* Entrance/Storeroom Lever x Lever 1.5˝ 3.0 63406812.xxx.Suffix* Entrance/Storeroom Lever x Lever 2˝ 3.0 6340$330 $3506830.xxx.Suffix* Residential Entrance Handleset x Lever 1.5˝ 3.0 63406832.xxx.Suffix* Residential Entrance Handleset x Lever 2˝ 3.0 6340All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Service $300 $315Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=1522.75˝ backsets comes with the 1.25˝ front.2.5˝ backsets comes with the 1.25˝ front. Non-standard 1˝ inch fronts are available for a 10% additional charge. To order non-standard front, add a ‘1’ at the end ofthe Item #. ie 6802.112.R1 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)1.5˝ and 2˝ backsets comes with the 1˝ front. Non-standard 1.25˝ fronts are available for a 10% additional charge. To order non-standard front, add a ‘125’ at theend of the Item #. ie 6802.112.R125 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)> Specify handing with Suffix* after finish designation (Suffix chart above left)> Some Baldwin mortise locks are reversible in the field if needed – see individual functionsWARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.6001, 6301, 6800, 6802Entrance and Apartment> Latch bolt by knob from either side, except when outside knob is locked bystop in front; then latch bolt by key outside and knob inside.> Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. (Not available for 2˝ or smaller backsets)> When extended, Deadbolt deadlocks latch bolt (not true for 6800 & 6802)FEDERAL SPECIFICATION EQUIVALENTS (FSE): ANSI Series: 1000-F08/F10NOTE: For single and double cylinder applications6025, 6325Back-To-Back Entrance> Latch bolt by thumb piece from either side, except when outside thumb piece is lockedby stop in front, then latch bolt by key either side and thumb piece inside.> Deadbolt by key either side, continuous turn of key retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. When extended, Deadbolt deadlocks latch bolt.NOTE: To order and price complete trim sets, order two sets of exterior handle trim in “BBXX˝ configuration.Baldwin Mortise Lock Turn Piece cylinder 844X.XXX may be used for interior, see page 134.6020, 6320, 6830, 6832Residential Entrance> Latch bolt by thumb piece outside and knob inside, except when thumb piece islocked by stop in front; then latch bolt by key outside and knob inside.> Deadbolt by key outside and turn piece inside.> Continuous turn of key outside retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. (Not available for 2˝ or smaller backsets)> When extended, Deadbolt deadlocks latch bolt.(not true for 6830 & 6832)FSE: Government Type: 122ANOTE: May be used in single and double cylinder applications

MORTISE LOCKSENTR ANCE FUNCTIONS6066Electric Strike Entrance> Latch bolt by knob inside and key outside. Outside trim is always rigid.> Auxiliary latch deadlocks latch bolt.> Optional solid latch bolt is available with this lock.> Caution should be used to ensure that the electric strike being used properlyengages the latch mechanism while depressing the auxiliary latch.NOTE: A full dummy trim with an active spindle is recommended for use with this lock.6021, 6321Residential Entrance, Emergency Egress> Latch bolt by thumb piece outside and knob inside, except when thumb piece islocked by stop in front; then latch bolt by key outside and knob inside.> Deadbolt by key outside and turn piece inside.> When Deadbolt is thrown, stop is automatically activated making outside thumb piece rigid. Insideknob retracts latch and Deadbolt simultaneously but DOES NOT free outside thumb piece.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment.> When extended, Deadbolt deadlocks latch bolt.NOTE: Not recommended for double cylinder applications.NOTE: 6321 - NOT FIELD REVERSIBLE6075, 6375Entrance, Emergency Egress> Latch bolt by knob from either side, except when outside knob is locked by stop in front; thenlatch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside.When Deadbolt is thrown, stop is automatically activated making outside knob rigid. Insideknob retracts latch and Deadbolt simultaneously but DOES NOT free outside knob.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment.When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F12/F20NOTE: Not recommended for double cylinder applications.NOTE: 6375 - NOT FIELD REVERSIBLE6077Entrance, Emergency Egress> Latch bolt by knob from either side, except when outside knob is locked by stop in front; thenlatch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside.When Deadbolt is thrown, stop is automatically activated making outside knob rigid. Insideknob retracts latch and Deadbolt simultaneously but DOES NOT free outside knob.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. When extended, Deadbolt deadlocks latch bolt.> Auxiliary latch bolt deadlocks latch bolt, creating a DOUBLE DEADLOCKINGFEATURE when the Deadbolt is extended.FSE: ANSI Series: 1000-F20NOTE: NOT FIELD REVERSIBLE. Not recommended for double cylinder applications.6310, 6812, 6810Entrance And Storeroom> Latch bolt by knob either side. Deadbolt by key outside and turn piece inside.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment.(Not available for 2˝ or smaller backsets)When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F21NOTE: for single and double cylinder applications.123

MORTISE LOCKSGR ADE 1, LIGHT-DUTY COMMERCIALList of available handling optionsRight hand Lever StrengthLeft hand Lever StrengthRight hand Reverse bevel Lever StrengthLeft hand Reverse bevel Lever StrengthSuffix*.RLS.LLS.RRLS.LRLSSpindle KeySwivel spindles are recommended for allGrade 1 Mortise Locks, except G110-G311PassageWHEN ORDERING CYLINDERSAll G-series light commercial mortiselocks require a special cylinder.Use the existing cylinder chart (backflap) for cylinder length, but add a suffix‘.EMHT’ to the end of the Item #.(same price as standard C keyway cylinders)EXAMPLE:Lifetime Polished Brass 1.25˝ cylinder forG-series mortise locks8323.003.EMHTNOTE: Ernhart Cam can be purchase separately,see page 128.Application:Baldwin Architects/Designers and Dealer Network haverequested the ability to utilize Baldwin Estate Trims inlight-duty commercial projects (guest rooms, condominium).The Baldwin G6000/G6300 line of Mortise Locks will providethis capability. All existing Baldwin lever by lever entranceand sectional set locksets are adaptable. Door Preparation:For use with metal doors and frames to be prepared inaccordance with ANSI A 115.11.Item # Description ANSI Backset030, 031, 033,034, 040, 050, 060102, 112, 150, 151152, 190, 260, 264G6010.xxx.Suffix* Dormitory Entrance or Storeroom Lever x Lever F21 2.75˝ $360 $380G6055.xxx.Suffix* Privacy, Bedroom or Bathroom Lever x Lever F19G6060.xxx.Suffix* Classroom, Entrance or Office Lever x Lever F04 2.75˝ 320 340G6065.xxx.Suffix* Storeroom or Closet Lever x Lever F07G6075.xxx.Suffix* Entrance or Apartment Lever x Lever F12G6077.xxx.Suffix* Entrance or Apartment Lever x Lever F202.75˝ 360 380G6085.xxx.Suffix* Entrance or Public Restroom Lever x Lever F09 2.75˝ 320 340G6090.xxx.Suffix* Store Door Lever x Lever F14 2.75˝ 360 380G6110.xxx.Suffix* Passage or Closet Lever x Lever F01G6130.xxx.Suffix* Classroom Lever x Lever F052.75˝ 320 340G6140.xxx.Suffix* Key x Key Deadlock F16G6150.xxx.Suffix* Single Key Deadlock F18 2.75˝ 290 310G6160.xxx.Suffix* Key x Turn Deadlock F17G6310.xxx.Suffix* Dormitory Entrance or Storeroom Lever x Lever F21 2.5˝ 360 380G6318.xxx.Suffix* Passage or Closet Lever x Lever F01G6355.xxx.Suffix* Privacy, Bedroom or Bathroom Lever x Lever F19G6360.xxx.Suffix* Classroom, Entrance or Office Lever x Lever F042.5˝ 320 340G6365.xxx.Suffix* Storeroom or Closet Lever x Lever F07G6375.xxx.Suffix* Entrance or Apartment Lever x Lever F12G6377.xxx.Suffix* Entrance or Apartment Lever x Lever F202.5˝ 360 380G6385.xxx.Suffix* Entrance or Public Restroom Lever x Lever F09 2.5˝ 320 340G6330.xxx.Suffix* Classroom Lever x Lever F05 2.5˝ 320 340G6340.xxx.Suffix* Key x Key Deadlock F16G6350.xxx.Suffix* Single Key Deadlock F18 2.5˝ 290 310G6361.xxx.Suffix* Key x Turn Deadlock F17G6390.xxx.Suffix* Store Door Lever x Lever F14 2.5˝ 360 380Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=1522.75˝ backsets comes with the 1.25˝ front.2.5˝ backsets comes with the 1.25˝ front. Non-standard 1˝ inch fronts are available for a 10% additional charge. To order non-standard front, add a ‘1’at the end of the Item #. ie 6802.112.R1 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)1.5˝ and 2˝ backsets comes with the 1˝ front. Non-standard 1.25˝ fronts are available for a 10% additional charge. To order non-standard front, add a‘125’ at the end of the Item #. ie 6802.112.R125 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)WARNING: DO NOT USE lever Strength mortise locks with knobs.They only turn one way and have a stiff turning action suitablefor levers.G6010 & G6310Dormitory Entrance or StoreroomG6055 & G6355Privacy, Bedroom or Bathroom003055056Specification:Grade 1: Meets/exceeds operational, security and cycletest requirements U/L: ANSI/UL 10B Listed 3 Hour FireRated – UL File No. R13846 Backsets: 2 ½ and 2 ¾ inchstandard Other Sizes Available Case: Heavy Gage PlatedSteel Armor Front: Wrought Brass, Bronze or S/S. AdjustableBevel Option Latch Bolt: ¾”” Throw. Brass – Anti-FrictionType Dead Bolt: 1” Throw. Brass – with Harden Steel InsertsReversibility: Most functions are field reversible. Factory setshanding to order.Strikes: Flat standard, curved and long lip strikes available.Latch bolt by handle either side. Deadboltby key outside and thumbturn inside. Useof inside handle retracts latch and deadboltsimultaneously automatically unlockingoutside handle.FEDERAL SPECIFICATION EQUIVALENTS(FSE): ANSI Series: 1000-F21Latch bolt by handle either side.Deadbolt by thumbturn inside and emergencykey outside. Use of inside handle retractslatch and dead bolt simultaneously -automatically unlocking outside handle.FSE: ANSI Series: 1000-F19Other Specification:3.437 in lever hub to cylinder center spacing note: designedto be used with existing Baldwin Estate Trim 7.2mm spindleon the diamond for use with Estate LeversG6090 & G6390StoreroomLatch bolt by handle inside and guest/master keyoutside. Outside handle always rigid. Deadbolt bythumbturn inside and service key only outside.G6060 & G6360Classroom, Entrance or OfficeLatch bolt by key outside and handle eitherside unless outside handle is locked by keyoutside. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F14FSE: ANSI Series: 1000-F04

G6065 & G6365Storeroom or ClosetLatch bolt by handle inside and key outside.Outside handle always rigid. Auxiliary latchdeadlocks latch bolt.FSE: ANSI Series: 1000-F07MORTISE LOCKSGR ADE 1, LIGHT-DUTY COMMERCIALG6075 & G6375Entrance or ApartmentLatch bolt by key outside and handle either sideunless outside handle is locked by toggle actionstop. Deadbolt by key outside and thumbturninside. Use of inside handle retracts latch anddeadbolt. Outside handle remains locked.FSE: ANSI Series: 1000-F12G6077 & G6377Entrance or ApartmentLatch bolt by key outside and handle either sideunless outside handle is locked by toggle-actionstop. Deadbolt by key outside and thumbturninside. Use of inside handle retracts latch dead boltsimultaneously. Outside handle remains locked.Auxiliary latch dead locks latchbolt and preventsmanipulation of locked toggle-action stop.G6085 & G6385Entrance or Public RestroomLatch bolt by handle either side unlessoutside handle is locked by master keyfrom inside. When outside handle is locked,latch Bolt by key outside and handle inside.Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F09FSE: ANSI Series: 1000-F20G6110 & G6318Passage or ClosetLatch bolt operated by handle either sideat all times. Both handles always free.FSE: ANSI Series: 1000-F01G6130 & G6330ClassroomLatch bolt by key outside and handle eitherside unless outside handle is locked by keyoutside. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F05G6140 & G6340Key X Key DeadlockDeadbolt by key either side.FSE: ANSI Series: 1000-F16G6150 & G6350Single Key DeadlockDeadbolt key outside. No inside operation.FSE: ANSI Series: 1000-F18G6160 & G6361Key X Turn DeadlockDeadbolt by key outside and thumbturn inside.FSE: ANSI Series: 1000-F17125

ESTATEINTERIOR MORTISE LOCKS, SMALL CASEList of available handling optionsSuffix*Right hand .RLeft hand .LRight hand Reverse bevel.RRLeft hand Reverse bevel.LRRight hand Lever Strength.RLSLeft hand Lever Strength.LLSRight hand Reverse bevel Lever Strength .RRLSLeft hand Reverse bevel Lever Strength .LRLSRight hand Reverse bevel Lever Strength .RRB1with 1˝ FrontLeft hand Reverse bevel Lever Strength .LRB1with 1˝ Front8530.xxxSpindle KeyINSTALLATION METHODSLocks are reversible, may be installed in either position030, 031, 033,Item # Description Backset Wt.034, 040, 050, 060102, 112, 150, 151152, 190, 260, 2640030550568530.xxx.Suffix* Interior Mortise Lock – Passage Knob x Knob 2.5˝8535.xxx.Suffix* Interior Mortise Lock – Passage Lever x Lever 2.5˝1.2 $145 $1658540.xxx.Suffix* Interior Mortise Lock – Privacy Knob x Knob 2.5˝8545.xxx.Suffix* Interior Mortise Lock – Privacy Lever x Lever 2.5˝1.5 145 1658530.xxx.Suffix* T Strike for Small Case Mortise Locks 25 30NOTE: 8530.xxx, 8535.xxx, 8540.xxx & 8545.xxx include a 3.5” spindle & offers 40° opening.Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=152> Specify handing with suffix*PRIVACY FUNCTION: Latch bolt by knob either side. Deadbolt by turn piece inside and Emergency Key 0417 outside.STEEL CASE: .625˝ × 3.375˝ × 3.75˝ (16 × 86 × 95mm)FRONT: .156˝ × 1˝ × 5.75˝ (4 × 25 × 133mm). Adjustable for beveled conditions; finished to match.LATCH BOLT: .5˝ × .625˝ (13 × 16mm) × .5˝ (13mm) throw. Furnished in US4 and 26D finishes to match trim.DEAD BOLT: .5˝ × .75˝ (13 × 19mm) × .5˝ (13mm) throw. Furnished in US4 and 26D finishes to match trim.HUB SIZE: .29˝ (7mm). Broached on the diamond.BACKSET: 2.5˝ (64mm)SPACING: Knob hub to turn piece: 2.25˝ (57mm)STRIKE: Specially-designed curved lip strike is fully reversible (non-handed); available in 1.25˝ (32mm)Lip to Center dimension only.DUST BOX: Box is furnished unattached; conceals installation marks and cutouts. ( 8530-000)PACKED: One in a box with a strike, dust box, and fasteners.ORDERING INSTRUCTIONS: Locks are supplied as illustrated in left column.To install locks as illustrated in right column, specify the OPPOSITE HAND OF THE DOOR.8535.xxxSMALL CASE MORTISE LOCK> Quick and easy install on pre-prepared doors> Heavy gauge steel case, solid forged brass interior working parts> Completely reversible for all door conditions>Turn Pieces and Emergency Release Trim must be ordered separately (NOT included in price of lock)> Due to 2-1/4” spacing, not all Baldwin rosettes and ER trim will fit. To verify fit, add 1/2” height of rose & 1/2” height of ERtrim, total cannot exceed 2.25”.8540.xxx8545.xxxFull Lip Strike

ESTATEINTERIOR MORTISE LOCKS, HEAVY DUTYList of available handling optionsSuffix*Right hand .RLeft hand .LRight hand Reverse bevel.RRLeft hand Reverse bevel.LRRight hand Lever Strength.RLSLeft hand Lever Strength.LLSRight hand Reverse bevel Lever Strength .RRLSLeft hand Reverse bevel Lever Strength .LRLSRight hand Reverse bevel Lever Strength .RRB1with 1˝ FrontLeft hand Reverse bevel Lever Strength .LRB1with 1˝ FrontSpindle KeyItem # Description Backset Wt. Std. Strike6010.xxx.Suffix* Interior Mortise Lock – Entrance & Storeroom Knob x Knob/Lever x Lever 2.75˝ 3.0 60406055.xxx.Suffix* Interior Mortise Lock – Privacy Knob x Knob/Lever x Lever 2.75˝ 2.8 60406060.xxx.Suffix* Interior Mortise Lock – Corridor/Office Knob x Knob/Lever x Lever 2.75˝ 2.8 60416065.xxx.Suffix* Interior Mortise Lock – Emergency/Utility Room Knob x Knob/Lever x Lever 2.75˝ 2.8 60416070.xxx.Suffix* Interior Mortise Lock – Dormitory/Exit Knob x Knob/Lever x Lever 2.75˝ 2.8 60406100.xxx.Suffix* Interior Mortise Lock – Bath/Bedroom Knob x Knob/Lever x Lever 2.75˝ 2.8 60406110.xxx.Suffix* Interior Mortise Lock – Passage Knob x Knob/Lever x Lever 2.75˝ 2.6 60416130.xxx.Suffix* Interior Mortise Lock – Classroom Knob x Knob/Lever x Lever 2.75˝ 2.8 60416315.xxx.Suffix* Interior Mortise Lock – Bath/Bedroom Knob x Knob/Lever x Lever 2.5˝ xx 63406318.xxx.Suffix* Interior Mortise Lock – Passage Knob x Knob/Lever x Lever 2.5˝ xx 63416845.xxx.Suffix* Narrow Interior Mortise Lock – Bath/Bedroom Lever x Lever 1.5˝ xx 63406847.xxx.Suffix* Narrow Interior Mortise Lock – Bath/Bedroom Lever x Lever 2˝ xx 63406855.xxx.Suffix* Narrow Interior Mortise Lock – Passage Lever x Lever 1.5˝ xx 63416857.xxx.Suffix* Narrow Interior Mortise Lock – Passage Lever x Lever 2˝ xx 6341030, 031, 033,034, 040, 050, 060102, 112, 150, 151152, 190, 260, 264003055056$290 $310All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Service $260 $275Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=1522.75˝ backsets comes with the 1.25˝ front.2.5˝ backsets comes with the 1.25˝ front. Non-standard 1˝ inch fronts are available for a 10% additional charge.To order non-standard front, add a ‘1’ at the end of the Item #. ie 6802.112.R1 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)1.5˝ and 2˝ backsets comes with the 1˝ front. Non-standard 1.25˝ fronts are available for a 10% additional charge.To order non-standard front, add a ‘125’ at the end of the Item #. ie 6802.112.R125 (except Reverse Bevel, LRB1, RRB1 and cannot apply to 2.75” backsets)> Specify handing with Suffix* after finish designation (Suffix chart above left)> Baldwin mortise locks are reversible in the field if neededWARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.> 6010, 6060, 6065, and 6070 mortise locks are not available in 030 finish.6010Entrance And Storeroom6055PrivacyLatch bolt by knob either side. Deadbolt by key outside and turnpiece inside. 1˝ (25mm) throw Deadbolt with saw-proof inserts isstandard equipment. When extended, Deadbolt deadlocks latch bolt.FEDERAL SPECIFICATION EQUIVALENTS(FSE): ANSI Series: 1000-F21NOTE: for single and double cylinder applicationsLatch bolt by knob either side. Deadbolt by turn pieceinside and emergency key 0417 outside. Insideknob retracts latch and Deadbolt simultaneously,automatically unlocking outside knob.1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F196065Emergency And Utility Room6060Corridor And Offi ceAuxiliary latch deadlocks latch bolt.* Suggested for use with electric strike. Caution should be used toensure that the electric strike being used properly engages the latchmechanism while depressing the auxiliary latch. We recommendsolid latch bolt with this lock when used with an electric strike.Latch bolt by knob from either side, except when outside knobis locked by stop in front, then by key outside and knob inside.Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F04FSE: ANSI Series: 1000-F07NOTE: For handle set applications, refer to Function 6066.6100, 6315 & 6845Bathroom And Bedroom6070Dormitory And ExitLatch bolt by knob either side. Deadbolt by turn pieceinside and emergency key 0417 outside. 1˝ (25mm) throwDeadbolt with saw-proof inserts is standard equipment.When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F02Latch bolt by knob either side. Deadbolt by key outsideand turn piece inside. When Deadbolt is projected,latch bolt is deadlocked and outside knob is rigid.Inside knob retracts latch and Deadbolt simultaneously,automatically unlocking outside knob.1˝ (25mm) throw Deadbolt with saw-proof inserts is standardequipment. When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F136110, 6318, 6855, & 6857Passage6130ClassroomLatch bolt by knob either side.FSE: ANSI Series: 1000-F01Latch bolt by knob either side, except whenoutside knob is locked by key outside, then bykey outside. Inside knob is always free.Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F05127

MORTISEDEADLOCKSSingle CylinderFunction: Dead bolt by cylinder key from either sideIncluded: 8300 Cylinder Collar, 2 eachNote: 6150 & 6850 may be used in double cylinder applications6150 6850 8550Double Cylinder8555Turn Piece/CylinderFunction: Dead bolt by cylinder key from either sideIncluded: 8300 Cylinder Collar, 2 eachFunction: Dead bolt by cylinder key outside and turn piece insideIncluded: 8300 Cylinder Collar & 6750 Turn PieceNote: Other turn pieces and cylinder trim are available030, 031, 033034, 040, 050Item # Description Backset Wt.060, 102, 112150, 151, 152190, 260, 2640030550566150.xxx Single Cylinder 2.75˝ 2.06160.xxx Turn Piece/Cylinder 2.75˝ 2.36860.xxx Turn Piece/Cylinder 1.5˝ 2.3$260 $2806850.xxx Single Cylinder 1.5˝ 2.08550.xxx Single Cylinder 2.5˝8555.xxx Double Cylinder 2.5˝ 1.0 160 1808560.xxx Turn Piece/Cylinder 2.5˝Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112,452=152BACKSET:2.75˝ – for doors 1.75˝ thick and over STEEL CASE: .875˝ × 4˝ × 5.5˝(22 × 102 × 140mm)2.5˝ – for doors 1.375˝ thick and over,1.375˝ doors REQUIRE 1˝ FRONTSTEEL CASE: .75˝ × 3.5˝ × 5.5˝(19 × 89 × 140mm)Adjustable for beveled conditions;finished to match.FRONT: 0.156˝ × 1˝ × 5.75˝(4 × 25 × 133mm)1.5˝ (38mm) Narrow Backset – for doors1.375˝ thick and over*Optional 1.25˝ (32mm) front available> Heavy gauge steel case with solid forged brass working parts> Completely reversible for all door conditionsDEADBOLT: .5˝ × 1.25˝ (13 × 32mm) × 1˝ (25mm) throw with two saw-proof inserts.STRIKE: Heavy gauge brass finished to match.Furnished with two 3˝ steel screws and a dust box standard (8530.000).CYLINDER: Standard mortise type not included – must be purchased separately.PACKED: One in a box. 8300 Cylinder Collar, 8530.000 Dust Box, and fasteners.STEEL CASE: 1.5˝ Backset:.75˝ × 1.5˝ × 5.5˝(19 × 64 × 140mm)2.0˝ Backset:.75˝ × 3˝ × 5.5˝(19 × 76 × 140mm)FRONT:* 0.218˝ × 1˝ × 8˝(6 × 25 × 203mm)61606860 85608550.xxx.STR – Strike

MORTISE LOCKSELECTRICALList of available handling optionsSuffix*Right hand .RLeft hand .LRight hand Reverse bevel.RRLeft hand Reverse bevel.LRRight hand Lever Strength.RLSLeft hand Lever Strength.LLSRight hand Reverse bevel Lever Strength .RRLSLeft hand Reverse bevel Lever Strength .LRLS030, 031, 033034, 040, 050Item # Description Backset Wt. Std. Strike060, 102, 112150, 151, 152190, 260, 2640030550566051.xxx.Suffix* Fail Safe (power off unlocks outside knob) Knob x Knob/Lever x Lever 2.75˝ 3.0 60416053.xxx.Suffix* Fail Secure (power off locks outside knob) Knob x Knob/Lever x Lever 2.75˝ 3.0 6041$780 $800All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Service 755 775Mortise Locks NOT available in Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=152> Specify handing with Suffix* after finish designation (Suffix chart above left)> Baldwin mortise locks are reversible in the field if neededWARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.Spindle Key6051 – Fail Safe> Latch bolt by knob either side except when outside knob is locked by energizing solenoid.> Key outside retracts latch bolt when solenoid is energized.> Inside knob is always FREE.> Auxiliary Latch deadlocks latch bolt.> IMPORTANT: POWER OFF UNLOCKS OUTSIDE KNOB.6053 – Fail Secure> Latch bolt by knob either side ONLY when solenoid is energized.> Latch bolt retracted by key outside and knob inside when solenoid is NOT energized.> Inside knob is always FREE.> Auxiliary Latch deadlocks latch bolt.> IMPORTANT: POWER OFF LOCKS OUTSIDE KNOB.Mortise Electrical SpecificationsRATED VOLTAGE: 24V AC/24V DC – AC/DC Converter is built inside.OPERATING VOLTAGE RANGE: 22-26V AC/V DCTEST VOLTAGE: 18V AC/V DCRATED CURRENT: 0.35 Amperes (0.4 Amperes Maximum)DUTY: ContinuousSOLENOID LEAD WIRE LENGTH: 6˝ (153mm)IMPORTANT FEATURE: To facilitate installation, Solenoid is constructed inside the lock case.IMPORTANT NOTES:1.) Each electrified lock should have its own 24 volt transformer. Two or more locks may be operated in PARALLEL from asingle transformer with the proper current rating. DO NOT connect locks in a series from a higher rated transformer.2.) We DO NOT recommend wiring electrified locks to a circuit containing electromagnetic devices as transient voltage cancause damage to the lock. Transient voltage must be suppressed at its source before connecting locks to the circuit.3.) A Varistor at 35 volts (peak-recurrent) may be used for transient voltage protection.1-hole for latch bolt – Electric strike not available - must order 3rd partyAPPLICATIONS: Electrically-controlled locking devices are designed for specific security and fire safety installations including:Security Controlled EntrancesStairwell DoorsApartment BuildingsComputer RoomsRemote-controlled Security DoorsHospital/Narcotic AreasFire Safety AlarmsCashier RoomsCONTROLLING/REGULATING DEVICES: Electrified locks can be locked or unlocked by the following means:Toggle (Wall) SwitchComputerized ControlsMaster Control ConsolesAccess Card ReadersAutomatic Time DevicesSmoke/Fire AlarmsSecurity AlarmsThermo-Sensitive Devices129

MORTISE LOCKSENTR ANCE MORTISE STRIKESSpecifications for all Entrance StrikesTHICKNESS: .093˝ (2.3mm), brass material.SCREWS: Furnished with 12 combination wood/machinescrews, finished to match.TEMPLATE: Designed to fit metal/wood frames preparedin accordance to ANSI A115.1/A115.11.FEATURES: Furnished flat with rounded lip edges foruniversal use with left and right handed locks.CURVED LIP: Available with a curved lip. Suppliedstandard with all locks incorporating asolid-type latch bolt. ALWAYS SPECIFYHAND OF DOOR. Example: 6340.XXX.R. Pleasesee ordering instructions in this section.ASA Strikes - Straight & Curved LipResidential Entrance, Emergency Egress6040, 6340ASA Strikes – Straight Lip – 1.25˝ Lip-to-CenterItem # Function6040.xxx 2.75˝ backset latch, deadbolt6041.xxx 2.75˝ backset latch only6043.xxx 2.75˝ backset latch, deadbolt, aux latch6340.xxx 1.5,˝ 2,˝ 2.5˝ backset latch, deadbolt6341.xxx 1.5,˝ 2,˝ 2.5˝ backset latch only031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 264003055056$30 $356041, 6341ASA Strikes – Curved Lip – 1.25˝ Lip-to-CenterItem # Function6040.xxx.R (.L) 2.75˝ backset latch, deadbolt6041.xxx.R (.L) 2.75˝ backset latch only6043.xxx.R (.L) 2.75˝ backset latch, deadbolt, aux latch6340.xxx.R (.L) 1.5,˝ 2,˝ 2.5˝ backset latch, deadbolt6341.xxx.R (.L) 1.5,˝ 2,˝ 2.5˝ backset latch onlyCurved lip strikes are handed – order same hand as door (.R or .L)$30 $356040.xxx, 6340.xxx – LATCH/DEADBOLT FUNCTION> Supplied standard with all locks> Anti-friction latch bolt6040 – Use with locks incorporating a .625˝ (16mm) wide latch bolt (6000 Series)6340 – Use with locks incorporating a .5˝ (13mm) wide latch bolt. (6300 Series and 6800 Series locks)60436041.xxx, 6341.xxx – LATCH BOLT FUNCTION6041 – Use with locks incorporating .625˝ (16mm) wide latch bolt (6000 Series)6341 – Use with locks incorporating .5˝ (13mm) wide latch bolt.(6300 Series and 6800 Series locks)6043.xxx – LATCH/AUXILIARY LATCH/DEADBOLT FUNCTIONUse with lock functions incorporating a latch, auxiliary latch, and deadboltAvailable for 6000 Series locks onlyASA Strikes - Extended Lip6037, 6038, 60396338, 6339Lip to Center length determined by the following formula:Door thickness ÷ 2 + .375˝ (10mm) = Lip to Center lengthRound to closest size031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 2646037, 6038, 6039, 6338, 6339.xxx – EXTENDED LIP STRIKES (HANDED)> Use with locks installed on special door/frame conditions> Supplied with a curved lip only> ALWAYS SPECIFY HAND OF DOOR AND REQUIRED LENGTH> Note: Reverse bevel doors use opposite hand for strike selection (ie. Right hand reverse bevel use left handstrike.)> Lip to Center lengths:.R158 or .L158 – 1.625˝ (41mm).R178 or .L178 – 1.875˝ (48mm).R214 or .L214 – 2.25˝ (57mm).R300 or .L300 – 3˝ (76mm)003055056Item # Function6037.xxx.XXXX 2.75˝ backset latch, deadbolt, aux latch6038.xxx.XXXX 2.75˝ backset latch only6039.xxx.XXXX 2.75˝ backset latch, deadbolt$65 $706338.xxx.XXXX 1.5,˝ 2,˝ 2.5˝ backset latch only6339.xxx.XXXX 1.5,˝ 2,˝ 2.5˝ backset latch, deadbolt.XXXX indicates Extended Lip to Center size = .R158, .L158, .R178, .L178, .R214, .L214, .R300, .L300*Strikes NOT available in Distressed finishes, non-distressed equivalents402=102, 412=112, 452=152

MORTISE LOCKSSTRIKES & ARMORED FRONTSDeadlock Strike & Dust Box6042 6001Deadlock StrikeItem #Function031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 2646042.xxx Deadlock function strike for 6000 & 6800 only $30 $35> Use with lock functions incorporating a deadbolt> Available for 6000 Series and 6800 Series locks only003055056DUST BOXItem # Description6001.000 Dust Box (included with all Mortise Locks) $5> Designed to conceal installation cut-outs and marks behind strikes.Box measures 1˝-(25mm) deep for use with all lock functions and strikes.> Furnished standard with all mortise locks illustrated within this section.Rabbeted Door Strike031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 264003055056Item # Function6897.xxx 1.5,˝ 2,˝ 2.5˝ backset, RABBETED strike $105 $110Used with all 1.5˝ (38mm), 2˝ (51mm), 2.5˝ (64mm) backset locks (6300, 6800 Series)FEATURES: Rabbeted strikes and pieces are used on pairs of doors that have a meeting rail which is rabbeted or onsingle doors that have a rabbeted frame. The strike is designed to fit in a .5˝ (13mm) rabbet; a separate rabbeted piececonforms to the face of the lock. This rabbeted assembly is available for locks with 1.25˝ (32mm) wide fronts only.SIZES: Strike 1˝ × 5˝ (25 × 127mm) (Non-Handed); Rabbeted Piece: .5˝ × 8˝ (13 × 203mm)IMPORTANT NOTES:1. RABBETED STRIKE AND PIECE ARE ONLY AVAILABLE FOR 1.75˝ (44mm) DOORS.2. When a rabbeted strike is ordered in conjunction with a keyed function lock, a steel security strike is NOT supplied.PACKED: One complete set in a box with appropriate fasteners.ORDERING INSTRUCTIONS: 6897 — Used with all 1.5˝ (38mm), 2˝ (51mm), 2.5˝(64mm) backset locks (6300, 6800 Series). All locks which are furnished standard witha 1˝ (25mm) wide front must be ordered with a 1.25˝ (32mm) wide front.NOT AVAILABLE for 2.75˝ backset locksArmored Fronts6000 Series6300 Series6800 Series1˝1˝1.25˝1.25˝1.25˝> For use on 6000 Series Locks (2.75˝ backset only)> 1.25˝ (32mm) wide front and .625˝ (16mm) wide latch bolt1.25˝ (32mm)6010.xxx.0004 Latch/Deadbolt6021.xxx.0004 Latch/Deadbolt/Stops6060.xxx.0004 Latch/Auxiliary Latch/Stops6065.xxx.0004 Latch/Auxiliary Latch6080.xxx.0004 Latch/Auxiliary Latch/Deadbolt/Stops6091.xxx.0004 Latch/Auxiliary Latch/Deadbolt6110.xxx.0004 Latch6150.xxx.0004 Deadbolt> For use on 6300 Series Locks (2.5˝ backset only)> 1.25˝ (32mm) wide front and .5˝ (13mm) wide latch bolt1.25˝ (32mm)6301.xxx.0004 Latch/Deadbolt/Stops6310.xxx.0004 Latch/Deadbolt6318.xxx.0004 Latch1˝ (25mm)6301.xxx.0084 Latch/Deadbolt/Stops6310.xxx.0084 Latch/Deadbolt6318.xxx.0084 Latch> For use on 6800-6802 Series Locks (1.5˝ and 2˝ backset)> 1.25˝ (32mm) wide front and .5˝ (13mm) wide latch bolt1.25˝ (32mm)6150.xxx.0004 Deadbolt6800.xxx.0004 Latch/Deadbolt/Stops6810.xxx.0004 Latch/Dead Bolt6855.xxx.0004 Latch1˝ (25mm)6150.xxx.0084 Deadbolt6800.xxx.0084 Latch/Deadbolt/Stops6810.xxx.0084 Latch/Deadbolt6855.xxx.0084 LatchArmored FrontsRemovable armored fronts protect the lock against tampering of the cylinder yoke assembly.Available in all matching finishes of mortise locks.ORDERING INSTRUCTIONS: Specify part number indicated below and finish required.1.25˝ Armored Fronts – standardfor 2.5˝ & 2.75˝ backset mortise locksItem #6010.xxx.00046021.xxx.00046060.xxx.00046065.xxx.00046080.xxx.00046091.xxx.00046110.xxx.00046150.xxx.00046301.xxx.00046310.xxx.00046318.xxx.00046800.xxx.00046810.xxx.00046855.xxx.0004FunctionLatch/DeadboltLatch/Deadbolt/StopsLatch/Auxiliary Latch/StopsLatch/Auxiliary LatchLatch/Auxiliary Latch/Deadbolt/StopsLatch/Auxiliary Latch/DeadboltLatchDeadboltLatch/Deadbolt/StopsLatch/DeadboltLatchLatch/Deadbolt/StopsLatch/DeadboltLatch1 ˝ Armored Fronts – standardfor 1.5˝ & 2˝ backset mortise locksItem # Function6301.xxx.0084 Latch/Deadbolt/Stops6310.xxx.0084 Latch/Deadbolt6318.xxx.0084 Latch6150.xxx.0084 Deadbolt6800.xxx.0084 Latch/Deadbolt/Stops6810.xxx.0084 Latch/Deadbolt6855.xxx.0084 Latch031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 264003055056$30 $35$30 $35131*Strikes NOT available in Distressed finishes, non-distressed equivalents402=102, 412=112, 452=152

CYLINDERSLOCK TRIM THICKNESS INDEXA - .0625˝ (1.5mm)6755 - Cylinder CollarB - .0937˝ (2.4mm)6511 - Escutcheon6540 - San Diego6543 - Lancaster6555 - Boston6557 - Richmond6563 - Chicago6565 - Monterey6642 - Escutcheon6763 - Escutcheon6774 - EscutcheonC - .125˝ (3mm)6541 - San Francisco6547 - Nashville6768 - Cylinder Collar6793 - EscutcheonD - .1875˝ (5mm)6508 - Escutcheon6551 - Reading6552 - BaltimoreE - .25˝ (6mm)6503 - Escutcheon6504 - Escutcheon6548 - Detroit6554 - Barclay6562 - New YorkF - .3125˝ (8mm)6546 - Wilmington6549 - Williamsburg (Sgl Cyl)6550 - Georgetown (Sgl Cyl)6560 - Lexington6573 - SpringfieldG - .375˝ (10mm)6570 - Atlanta6944 - PasadenaH - .435˝ (11mm)6952 - Edinburgh6962 - FenwickH1 - .53˝ (12mm)M502 - Cody ¾ escutcheonM504 - Cody full escutcheonI - .5625˝ (14mm)6515 - Oval Edinburgh (Mortise)6520 - Bristol (Mortise)6797 - Escutcheon6931 - Dallas6940 - Denver6922 - Lakewood6933 - Versailles6938 - Mobile6942 - Bismark6975 - Escutcheon6567 - Trenton6765 - Escutcheon6767 - Escutcheon6571 - Concord6737 - Cylinder Collar6794 - Escutcheon6939 - Bristol Lever Set6991 - Escutcheon8300 - Cylinder Collar (¹⁄16˝ Adj.)6754 - Cylinder Collar6757 - Cylinder Collar6790 - Escutcheon6795 - Escutcheon6798 - Escutcheon6950 - Kensington6738, 6739, 67436963 - Bristol Handle Set6966 - Lakeshore Handleset6973 - Houston Entrance Set6999 - RichlandM512 - Boulder ¾ escutcheonM514 - Boulder full escutcheon6516 - Oval Edinburgh (Mortise)6526 - Kensington (Mortise)6980 - Escutcheon6986 - Escutcheon6993 - Escutcheon6996 - Escutcheon6948 - Victoria8300 - Cylinder Collar (¹⁄8˝ Adj.)6961 - Westminster8300 - Cylinder Collar (No Adj.)6974 - Lakeshore Entrance Set6976 – MinneapolisM516 - Soho ¾ escutcheonM522 - Bethpage6503 - Escutcheon .25˝ E6504 - Escutcheon .25˝ E6505 - Box Escutcheon .875˝ K6508 - Escutcheon .1875˝ D6511 - Escutcheon .09˝ B6513 - Escutcheon .375˝ G6515 - Oval Edinburgh (Mort) .5625˝ I6516 - Oval Edinburgh (Mort) .5625˝ I6520 - Bristol (Mort) .5625˝ I6526 - Kensington (Mort) .5625˝ I6540 - San Diego .09˝ B6541 - San Francisco .125˝ C6542 - Tremont .75˝ J6543 - Lancaster .09˝ B6544 - Hamilton .75˝ J6546 - Wilmington .3125˝ F6547 - Nashville .125˝ C6548 - Detroit .25˝ E6549 - Williamsburg .3125˝ F6549 - Williamsburg .875˝ K6513 - Escutcheon .375˝ G6550 - Georgetown .3125˝ F6550 - Georgetown .875˝ K6551 - Reading .1875˝ D6552 - Baltimore .1875˝ D6554 - Barclay .25˝ E6555 - Boston .09˝ B6557 - Richmond .09˝ B6560 - Lexington .3125˝ F6562 - New York .25˝ E6563 - Chicago .09˝ B6565 - Monterey .09˝ B6567 - Trenton .1875˝ D6570 - Atlanta .375˝ G6571 - Concord .25˝ E6573 - Springfield .3125˝ F6641 - Pasadena .375˝ G6642 - Escutcheon .09˝ B6737 - Cylinder Collar .25˝ E6738 - Cylinder Collar .375˝ G6739 - Cylinder Collar .375˝ G6743 - Cylinder Collar .375˝ G6754 - Cylinder Collar .3125˝ F6755 - Cylinder Collar .625˝ A6757 - Cylinder Collar .3125˝ F6763 - Escutcheon .09˝ B6765 - Escutcheon .1875˝ D6767 - Escutcheon .1875˝ D6768 - Cylinder Collar .125˝ C6774 - Escutcheon .09˝ B6790 - Escutcheon .3125˝ F6791 - Escutcheon .75˝ J6793 - Escutcheon .125˝ C6794 - Escutcheon .25˝ E6795 - Escutcheon .3125˝ F6797 - Escutcheon .09˝ B6798 - Escutcheon .3125˝ F6922 - Lakewood .125˝ C6931 - Dallas .09˝ B6933 - Versailles .125˝ C6938 - Mobile .125˝ C6939 - Bristol Lever Set .25˝ E6940 - Denver .09˝ B6942 - Bismark .125˝ C6944 - Pasadena .435˝ G6948 - Victoria .1875˝ D6950 - Kensington .3125˝ F6951 - Stanford .75˝ J6952 - Edinburgh .435˝ H6961 - Westminster .3125˝ F6962 - Fenwick .435˝ H6963 - Bristol Handle Set .375˝ G6966 - Lakeshore Handleset .375˝ G6973 - Houston Entrance Set .435˝ H6974 - Lakeshore Entrance .375˝ G6975 - Escutcheon .125˝ C6976 – Minneapolis .375˝ G6980 - Escutcheon .125˝ C6986 - Escutcheon .125˝ C6988 - Escutcheon .09˝ B6991 - Escutcheon .25˝ E6993 - Escutcheon .125˝ C6996 - Escutcheon .125˝ C6999 - Richland .435˝ H8300 - Cylinder Collar .1875˝ D8300 - Cylinder Collar .25˝ E8300 - Cylinder Collar .3125˝ FM502 - Cody ¾ escutcheon .54˝ H1M504 - Cody full escutcheon .54˝ H1M512 - Boulder ¾ escutcheon .54˝ H1M514 - Boulder full escutcheon .54˝ H1M516 - Soho ¾ escutcheon .54˝ H1M522 - Bethpage .54˝ H1J - .75˝ (18mm)6542 - Tremont6544 - Hamilton6791 - Escutcheon6951 - StanfordDECIMAL FRACTION CHARTK - .875˝ (22mm)6505 - Box Escutcheon(Dbl. Cyl. Only)6549 - Williamsburg(Dbl. Cyl. Only)6550 - Georgetown(Dbl. Cyl. Only)FRACTION DECIMAL1⁄16˝ .0625˝1⁄8˝ .125˝3⁄16˝ .1875˝¼˝ .25˝5⁄16˝ .3125˝3⁄8˝ .375˝7⁄16˝ .4375˝½˝ .5˝9⁄16˝ .5625˝5⁄8˝ .625˝11⁄16˝ .6875˝¾˝ .75˝13⁄16˝ .8125˝7⁄8˝ .875˝*Cylinders NOT available in Distressed finishes,non-distressed equivalents: 402=102, 412=112, 452=152

CYLINDERSC KEYWAY TABLESingle Cylinder – C KeywayDoorThicknessLock TrimThicknessA – .0625˝B – .0937˝C – .125˝D – .1875˝E – .25˝F – .3125˝G – .375˝H – .435˝CylinderLength1˝8321.xxx1˝8321.xxx1˝8321.xxx1˝8321.xxx1˝8321.xxx1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝BlockingRing.1875˝8440.xxx.5.1562˝8440.xxx.4.125˝8440.xxx.3—————CylinderLength1˝8321.xxx1˝8321.xxx1.125˝8322.xxx1.125˝8322.xxx1.25˝8323.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxxBlockingRing————————CylinderLength1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxxBlockingRing————————CylinderLength1.25˝8323.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxx1.5˝8325.xxx1.625˝8326.xxxBlockingRing————————CylinderLength1.375˝8324.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxx1.5˝8325.xxx1.625˝8326.xxx1.625˝8326.xxx1.75˝8327.xxxBlockingRing————————Item # Description8321.xxx 1˝ Mortise Cyl.8322.xxx 1.125˝ Mortise Cyl.8323.xxx 1.25˝ Mortise Cyl.8324.xxx 1.375˝ Mortise Cyl.8325.xxx 1.5˝ Mortise Cyl.8326.xxx 1.625˝ Mortise Cyl.8327.xxx 1.75˝ Mortise Cyl.8328.xxx 2˝ Mortise Cyl.8329.xxx 2.25˝ Mortise Cyl.8330.xxx 2.5˝ Mortise Cyl.031, 033, 040,050, 060, 102,112, 150, 151,152, 190, 260, 264003055056$50 $55$110 115NOTE:Hotel function cylinders: add “H” to end. $25 list Adder.When ordering cylinders for G-SERIES MORTISE LOCKS, use this chart,but add a suffix ‘.EMHT’ to the end of the Item #.(same price as standardC keyway cylinders)EXAMPLE:Lifetime Polished Brass 1.25˝ cylinder for G-series mortise8323.003.EMHTH1 – .53˝1.125˝8322.xxx—1.5˝8325.xxx—1.625˝8326.xxx—1.75˝8327.xxx—2˝8328.xxx—8321-8330I – .56˝1.125˝8322.xxx—1.5˝8325.xxx—1.625˝8326.xxx—1.75˝8327.xxx—2˝8328.xxx—J – .75˝1.5˝8325.xxx—1.625˝8326.xxx—1.75˝8327.xxx—2˝8328.xxx.125˝8440.xxx.32˝8328.xxx—Double Cylinder - C KeywayDoorThicknessLock TrimThicknessA – .0625˝B – .0937˝C – .125˝D – .1875˝CylinderLength1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝BlockingRing.2812˝+8440.xxx.7.25˝+8440.xxx.6.2187˝+8440.xxx.6.1526˝+8440.xxx.4CylinderLength1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1.125˝8322.xxx.DBLBlockingRing.1875˝8440.xxx.5.125˝8440.xxx.3.0625˝8440.xxx.1.093˝+8440.xxx.2CylinderLengthBlockingRing1˝8321.xxx.DBL —1.125˝8322.xxx.DBL1.125˝8322.xxx.DBL.0625˝8440.xxx.1.0625˝8440.xxx.11.125˝8322.xxx.DBL —CylinderLengthBlockingRing1.125˝8322.xxx.DBL —1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL0625˝8440.xxx.1.0625˝8440.xxx.1—CylinderLengthBlockingRing1.25˝8323.xxx.DBL —1.375˝8324.xxx.DBL1.375˝8324.xxx.DBL1.375˝8324.xxx.DBL0625˝8440.xxx.1.0625˝8440.xxx.1—Item # Description8321.xxx.DBL 1˝ Double Cyl.8322.xxx.DBL 1.125˝ Double Cyl.8323.xxx.DBL 1.25˝ Double Cyl.8324.xxx.DBL 1.375˝ Double Cyl.8325.xxx.DBL 1.5˝ Double Cyl.8326.xxx.DBL 1.625˝ Mortise Cyl.8327.xxx.DBL 1.75˝ Mortise Cyl.8328.xxx.DBL 2˝ Mortise Cyl.8329.xxx.DBL 2.25˝ Mortise Cyl.8330.xxx.DBL 2.5˝ Mortise Cyl.031, 033,040, 050,060, 102,112, 150,151, 152,190, 260,264003055056$100 $110220 230E – .25˝F –.3125˝G – .375˝1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL.1875˝8440.xxx.5.0625˝8440.xxx.1—1.125˝8322.xxx.DBL1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL.0625˝8440.xxx.1.093˝+8440.xxx.2.0625˝8440.xxx.11.25˝8323.xxx.DBL.0625˝8440.xxx.11.25˝8323.xxx.DBL —1.375˝8324.xxx.DBL.0625˝8440.xxx.11.375˝8324.xxx.DBL1.375˝8324.xxx.DBL1.5˝8325.xxx.DBL.0625˝8440.xxx.1—.0625˝8440.xxx.11.5˝8325.xxx.DBL1.5˝8325.xxx.DBL1.625˝8326.xxx.DBL.0625˝8440.xxx.1—.0625˝8440.xxx.1Blocking RingsItem #Description031, 033,040, 050,060, 102,112, 150,151, 152,190, 260,264003055056H – .435˝1.125˝8322.xxx.DBL.0625˝8440.xxx.11.25˝8323.xxx.DBL—1.5˝8325.xxx.DBL.0625˝+8440.xxx.11.5˝8325.xxx.DBL—1.625˝8326.xxx.DBL—8440.xxx.0018440.xxx.002.0625˝ – ¹⁄16˝ B.R..0937˝ – ³⁄32˝ B.R.I –.5625˝J – .75˝1.125˝8322.xxx.DBL1.5˝8325.xxx.DBL.0937˝+8440.xxx.2.0937˝+8440.xxx.21.5˝8325.xxx.DBL1.625˝8326.xxx.DBL.0625˝8440.xxx.1.0625˝8440.xxx.11.5˝8325.xxx.DBL1.75˝8327.xxx.DBL.0625˝8440.xxx.1.0625˝8440.xxx.11.625˝8326.xxx.DBL2˝8328.xxx.DBL.156˝+8440.xxx.4.156˝+8440.xxx.42˝8328.xxx.DBL2˝8328.xxx.DBL.0625˝8440.xxx.1.0625˝8440.xxx.18440.xxx.003 .125˝ – ¹⁄8˝ B.R.8440.xxx.004 .1562˝ – 5 ⁄32˝ B.R.8440.xxx.005 .1875˝ – ³⁄16˝ B.R.8440.xxx.006 .25˝ – ¼˝ B.R.$15 $20F –.3125˝ExteriorK – .875˝Exterior1˝8321.xxx1.5˝8325.xxx——1.125˝8322.xxx1.75˝8327.xxx——1.25˝8323.xxx2˝8328.xxx—.125˝8440.xxx.31.375˝8324.xxx2˝8328.xxx——1.5˝8325.xxx2.25˝8329.xxx—.125˝440.xxx.38440+Two Blocking Rings Required133*Cylinders NOT available in Distressed finishes,non-distressed equivalents: 402=102, 412=112, 452=152

CYLINDERSACCESSORIESCams for Mortise CylindersAdams Rite CamEmhart CamItem # Description Finish Price8300.009.0065 5-pin Cylinder Spring Covers 0098300.009.0066 6-pin Cylinder Spring Covers 009 $278300.109.005 Cylinder Springs 1098300.509.AR Adams Rite Cam 0098300.509.EMHT Emhart Cam 0098300.509.STD Standard Cam 00978313.329.TPH1 Rim Cylinder Tailpiece – 2.2188˝ (56mm) —8313.329.TPH2 Rim Cylinder Tailpiece – 3.1875˝ (81mm) —ADAMS RITE CAMThickness: .0625˝ (2mm)For Adams Rite Series 1800,4093, 4500.EMHART CAMThickness: .0625˝ (2mm)For use with Emhart Mortise type locks.Standard CamRim Cylinder TailpieceSTANDARD CAMThickness: .0625˝ (2mm)For use with most manufacturers of Mortise type locks.Tailpiece Bars For Rim CylindersHorizontal8313.329.TPH1 – 2.2188˝ (56mm)8313.329.TPH2 – 3.1875˝ (81mm)Residential Trim Marking TemplateItem # Description Price8498.000 Residenttial trim marking template – 2.75˝ doors $52Features: To eliminate face drilling errors with Residential Trim shown in this section, Baldwinoffers an economical metal template to ensure precision hole alignment. The templateis designed to easily slide over a 1.75˝ (44mm) door and engages into the mortisecutout. The hole positions mark the center of the specific bore locations. Beforemarking hole positions, ALWAYS check to verify that metal template is square tomortise cutout. Mark hole locations accordingly and remove template.Mortise Lock Turn Piece CylindersItem #Description030, 031, 033,034, 040, 050,060, 102, 112,150, 151, 152,190, 260, 2640030550568441.xxx1˝ Turn Knob Cylinder8442.xxx8443.xxx1.125˝ Turn Knob Cylinder1.25˝ Turn Knob Cylinder$110 $1158444.xxx1.625˝ Turn Knob CylinderMortise Lock Turn Piece CylindersFeatures: Used for specific conditions when operation by turn piece is required in place of a key.Available only with 6720 T-knob attached. Not handed.*Cylinders NOT available in Distressed finishes,non-distressed equivalents: 402=102, 412=112, 452=152

CYLINDERSCYLINDER TRIMCylinder TrimCylinder Not Included67372.5˝ × 2.5˝ x .25˝projection – E(64 × 64mm)67391.9˝ x 1.9˝ x .375˝projection – G6738, 6738S*1.75˝ dia. x .375˝projection – G6743, 6743S*2.0˝ x 2.0˝ x .375˝projection – GItem #6737.xxx6738.xxx6738S.xxx*6739.xxx6743.xxx6743S.xxx*6754.xxx6757.xxx6761.xxx6768.xxxDescriptionSquare Cylinder CollarContemporary Round CollarContemporary Round Stainless*Lakeshore Cylinder CollarContemporary Square CollarContemporary Square Stainless*Oval Cylinder CollarColonial Cylinder CollarDummy CylinderBeaded Cylinder Collar030, 031, 033,034, 040, 050,060, 102, 112,150, 151, 152,190, 260, 264003, 055056, 402412, 452$45 $506755.xxx Cylinder Lock Cover Plate 95 1006755.xxx.001 1/16˝ Blocking Ring – 6755 only6755.xxx.002 3/32˝ Blocking Ring – 6755 only (040 finish only) 106755.xxx.003 1/8˝ Blocking Ring – 6755 only8300.xxx Compression Cylinder Collar 18 238314.xxx Wrought Cylinder Collar** 15 20*Stainless Steel collars available in 320 & 324**8314 Wrought Cylinder Collar NOT available in Distressed finishesNOTE: Cylinder collars are only for mortise cylinders and will not work on tubular deadbolts.675467571.687˝ × 3˝ x .3125˝projection – F(43 × 76mm)1.75˝ projection - F(44mm) dia.6761For use with escutcheonsand sectional trim forsymmetrical appearanceon pairs of doors.67681.75˝ projection - C(44mm) dia.67551.625˝ × 2.375˝ x .3125˝projection – A(41 × 60mm)NOTE: Prepared to fitBaldwin mortise or trimcylinders only.83008314Compression CylinderCollarDiameter:Standard Rim Cylinder CollarDiameter: 1.945˝ (49mm)Thickness: .030 (.8mm)Adjustment Range: None135*Baldwin Stainless Steel products crafted with Grade 304 Stainless Steel

CYLINDERSMORTISE CYLINDER SPECIFICATIONSMortise Lock CylindersLength of Mortise Cylinders: The length of a Baldwin cylinder is the measurement fromthe back edge of the cylinder cap to the outer surface of the cam as illustrated.Item NumberC(03) Keyway E(05) Keyway F(06) KeywayCylinder Length8321 8341 8361 1˝ (25mm)8322 8342 8362 1.125˝ (29mm)8323 8343 8363 1.25˝ (32mm)8324 8344 8364 1.375˝ (35mm)8325 8345 8365 1.5˝ (38mm)8326 — — 1.625˝ (41mm)8327 — — 1.75˝ (44mm)8328 — — 2˝ (51mm)8329 — — 2.25˝ (57mm)8330 — — 2.5˝ (64mm)Features: Baldwin 6 pin (5 pin for 1˝ [25mm]) precision mortise cylinders aremade of solid extruded brass. Finish is applied to cap only.When ordered separately, cylinders are supplied with 2 nickel silver keys.Cam 8300.509.STD is furnished. Cams illustrated on page K/10can be ordered at additional charge. Cylinder lengths greater than 1.5˝(38mm) are not available for E(05) and F(06) keyway Cylinders.Keying Requirements: Available in a multitude of keying arrangements including Master,Grand Master and Construction Keying Levels.Ordering Instructions: Standard Mortise Cylinder: Specify item number and finish.Hotel Mortise Cylinder: Specify item number, finish with suffix“H”. Cylinder price includes all MK charges and standard keybow. Cylinder is available with 6 pin keying only.No. 1 –No. 2 –No. 3 –No. 4 –No. 5 –8320.XXX.003 – Series cylinder plug. Specify length required and either US4or 26D finish.8300.509.STD – Cylinder Cam Standard8300.509.004 – Mounting Screws for cam8300.109.005 – Tumbler Springs8300.009.0065 – Spring Covers (5 pin)8300.009.0066 – Spring Covers (6 pin)No. 6 – 8320.009.101 – Top Pins (For Bottom Pins #0–#3)8320.009.102 – Top Pins (For Bottom Pins #4–#6)8320.009.103 – Top Pins (For Bottom Pins #7–#9)No. 7 –8320.009.202 #2 Master Pins - .0295 (0.749mm)8320.009.203 #3 Master Pins - .0445 (1.130mm)8320.009.204 #4 Master Pins - .0595 (1.511mm)8320.009.205 #5 Master Pins - .0745 (1.892mm)8320.009.206 #6 Master Pins - .0895 (2.273mm)8320.009.207 #7 Master Pins - .1045 (2.654mm)8320.009.208 #8 Master Pins - .1195 (3.035mm)8320.009.209 #9 Master Pins - .1345 (3.416mm)No. 8 –8320.152.300 #0 Bottom Pins - .1655 (4.204mm)8320.152.301 #1 Bottom Pins - .1805 (4.585mm)8320.152.302 #2 Bottom Pins - .1955 (4.966mm)8320.152.303 #3 Bottom Pins - .2105 (5.347mm)8320.152.304 #4 Bottom Pins - .2255 (5.728mm)8320.152.305 #5 Bottom Pins - .2405 (6.109mm)8320.152.306 #6 Bottom Pins - .2555 (6.489mm)8320.152.307 #7 Bottom Pins - .2705 (6.871mm)8320.152.308 #8 Bottom Pins - .2855 (7.252mm)8320.152.309 #9 Bottom Pins - .3005 (7.633mm)465783 21

CYLINDERSRIM CYLINDERS, FOR BALDWIN RIM LOCKSRim Lock Cylinders & Tailpiece Bars83338333 – C(03) KeywayItem # Description Keyway030, 031, 033,034, 040, 050,060, 102, 112,150, 151, 152,190, 260, 2640030550568333.xxx Rim Cylinder C $75 $808333.xxx.H Rim Cylinder C 105 110Features: Baldwin 6 pin precision Rim Cylinders are made of solid extruded brass.Finish is applied to cap only. When ordered separately, Cylinders are suppliedwith 2 nickel silver keys. Tailpiece 8313.329.TPH1 is furnished.C(03) Keyway Cylinders are furnished standard with rim locksunless otherwise specified. Consult price list.Keying Requirements: Available in a multitude of keying arrangements includingMaster, Grand Master and Construction Keying Levels.Cylinder Collar: Cylinder Collars are furnished standard with all keyed rim locks.Cylinder collars shown on page K/11 may be furnished at an additional charge.Ordering Instructions: Standard Rim Cylinder: Specify item number and finish.Weight Each: .3 lb. (.14kg)Tailpiece Bars for Rim CylindersItem # Description 3298313.329.TPH1 Rim cylinder tailpiece (regular – 2.22˝)(329 finish only) $78313.329.TPH2 Rim cylinder tailpiece (long – 3.1875˝)No. 1 – 8333.XXX.003 – Cylinder plug. Specify eitherUS4 or 26D finish.No. 2 – 8333.009.007 – Tailpiece PlateNo. 3 – 8300.509.004 – Mounting Screws for TailpieceNo. 4 – 8300.109.005 – Tumbler SpringsNo. 5 – 8300.009.0066 – Spring Covers (6 pin)No. 6 – 8320.009.101 – Top Pins (For Bottom Pins #0–#3)8320.009.102 – Top Pins (For Bottom Pins #4–#6)8320.009.103 – Top Pins (For Bottom Pins #7–#9)No. 7 – 8320.009.202 #2 Master Pins - .0295 (0.749mm)8320.009.203 #3 Master Pins - .0445 (1.130mm)8320.009.204 #4 Master Pins - .0595 (1.511mm)8320.009.205 #5 Master Pins - .0745 (1.892mm)8320.009.206 #6 Master Pins - .0895 (2.273mm)8320.009.207 #7 Master Pins - .1045 (2.654mm)8320.009.208 #8 Master Pins - .1195 (3.035mm)8320.009.209 #9 Master Pins - .1345 (3.416mm)No. 8 –No. 9 –No. 10 –No. 11 –No. 12 –8320.152.300 #0 Bottom Pins - .1655 (4.204mm)8320.152.301 #1 Bottom Pins - .1805 (4.585mm)8320.152.302 #2 Bottom Pins - .1955 (4.966mm)8320.152.303 #3 Bottom Pins - .2105 (5.347mm)8320.152.304 #4 Bottom Pins - .2255 (5.728mm)8320.152.305 #5 Bottom Pins - .2405 (6.109mm)8320.152.306 #6 Bottom Pins - .2555 (6.489mm)8320.152.307 #7 Bottom Pins - .2705 (6.871mm)8320.152.308 #8 Bottom Pins - .2855 (7.252mm)8320.152.309 #9 Bottom Pins - .3005 (7.633mm)8333.009.010 Spacer8313.329.TPH1 Tailpiece – Horizontal (Regular)8313.329.TPH2 Tailpiece – Horizontal (Long)8313.509.008 Mounting Plate8313.509.009 Mounting Screws5467812 11 3 2 9 101137*Cylinders NOT available in Distressed finishes,non-distressed equivalents: 402=102, 412=112, 452=152

CYLINDERSKEY BLANKSKey BlanksPriceK 8335.152 5-pin standard key blank, C (03) keyway, 50/box $3/eaK 8335.152.CK Construction key 8K 8335.152.CUTK Cut keys ordered separately 12K 8335.152.DK Display keys 24K 8335.152.EK Emergency keys 24K 8335.152.GGGM Great great grand master keys 24K 8335.152.GGMK Great grand master keys 24K 8335.152.GMK Grand master keys 24K 8335.152.MK Master keys 24K 8335.152.SKD Single keyed different 24K 8335.152.SOK Shut out keys 24K 8336.152 6-pin key blank, C (03) keyway, 50/box 3K 8336.152.CK Construction key 8K 8336.152.CUTK Cut keys ordered separately 12K 8336.152.DK Display keys 24K 8336.152.EK Emergency keys 24K 8336.152.GGGM Great great grand master keys 24K 8336.152.GGMK Great grand master keys 24K 8336.152.GMK Grand master keys 24K 8336.152.MK Master keys 24K 8336.152.SKD Single keyed different 24K 8336.152.SOK Shut out keys 24K 8337.152 6-pin hotel large bow (2˝) key blank C (03) keyway 10K 8337.152.CK Construction key 8K 8337.152.CUTK Cut keys ordered separately 12K 8337.152.DK Display keys 24K 8337.152.EK Emergency keys 24K 8337.152.GGGM Great great grand master keys 24K 8337.152.GGMK Great grand master keys 24K 8337.152.GMK Grand master keys 24K 8337.152.HOTL Hotel key bow 9K 8337.152.MK Master keys 24K 8337.152.SKD Single keyed different 24K 8337.152.SOK Shut out keys 24K 8355.152 5-pin standard key blank, E (05) keyway, 50/box 5K 8355.152.CK Construction key 8K 8355.152.CUTK Cut keys ordered separately 12K 8355.152.DK Display keys 24K 8355.152.EK Emergency keys 24K 8355.152.GGGM Great great grand master keys 24K 8355.152.GGMK Great grand master keys 24K 8355.152.GMK Grand master keys 24K 8355.152.MK Master keys 24K 8355.152.SKD Single keyed different 24K 8355.152.SOK Shut out keys 24K 8356.152 6-pin key blank, E (05) keyway, 50/box 5K 8356.152.CK Construction key 8K 8356.152.CUTK Cut keys ordered separately 12K 8356.152.DK Display keys 24K 8356.152.EK Emergency keys 24K 8356.152.GGGM Great great grand master keys 24K 8356.152.GGMK Great grand master keys 24K 8356.152.GMK Grand master keys 24K 8356.152.MK Master keys 24K 8356.152.SKD Single keyed different 24K 8356.152.SOK Shut out keys 24PriceK 8357.152 6-pin hotel large bow (2˝) key blank E (05) keyway $10/eaK 8357.152.CK Construction key 8K 8357.152.CUTK Cut keys ordered separately 12K 8357.152.DK Display keys 24K 8357.152.EK Emergency keys 24K 8357.152.GGGM Great great grand master keys 24K 8357.152.GGMK Great grand master keys 24K 8357.152.GMK Grand master keys 24K 8357.152.HOTL Hotel key bow 9K 8357.152.MK Master keys 24K 8357.152.SKD Single keyed different 24K 8357.152.SOK Shut out keys 24K 8375.152 5-pin key blank, E (06) keyway, 50/box 5K 8375.152.CK Construction key 8K 8375.152.CUTK Cut keys ordered separately 12K 8375.152.DK Display keys 24K 8375.152.EK Emergency keys 24K 8375.152.GGGM Great great grand master keys 24K 8375.152.GGMK Great grand master keys 24K 8375.152.GMK Grand master keys 24K 8375.152.MK Master keys 24K 8375.152.SKD Single keyed different 24K 8375.152.SOK Shut out keys 24K 8376.152 6-pin key blank, F (06) keyway, 50/box 5K 8376.152.CK Construction key 8K 8376.152.CUTK Cut keys ordered separately 12K 8376.152.DK Display keys 24K 8376.152.EK Emergency keys 24K 8376.152.GGGM Great great grand master keys 24K 8376.152.GGMK Great grand master keys 24K 8376.152.GMK Grand master keys 24K 8376.152.MK Master keys 24K 8376.152.SKD Single keyed different 24K 8376.152.SOK Shut out keys 24K 8377.152 6-pin hotel large bow (2˝) key blank F (06) keyway 10K 8377.152.CK Construction key 8K 8377.152.CUTK Cut keys ordered separately 12K 8377.152.DK Display keys 24K 8377.152.EK Emergency keys 24K 8377.152.GGGM Great great grand master keys 24K 8377.152.GGMK Great grand master keys 24K 8377.152.GMK Grand master keys 24K 8377.152.HOTL Hotel key bow 9K 8377.152.MK Master keys 24K 8377.152.SKD Single keyed different 24K 8377.152.SOK Shut out keys 24K 8401.152 Issued under factory authorization only. 6Not available for normal saleK 8406.152 Issued under factory authorization only. 6Not available for normal saleK 8416.152 Issued under factory authorization only. 6Not available for normal sale‡ 8053.040.0002 Construction key cylinder plug 040 48053.264.002 264 4*Per cylinder master keying charge 18*Per cylinder construction keying charge 18*NOTE: 2 Keys provided per cylinder.*NOTE: 152 finish in cylinders, locks, and latches is Antique Nickel with matte lacquer.This coordinates with lock trim in 452 finish.

MISCELLANEOUSREPLACEMENT PARTS1A 8490.000.001 .25-20 × 3˝ FH PH MS Door knocker/hand set/thru-bolt 10 ea $101B 8490.000.002 No. 10-24 × 3˝ OH PH MS × 260 Extra long trim thru-bolts 10 ea 111C 8490.000.003 No. 10-24 × 3˝ OH PH MS × 030 Extra long trim thru-bolts 10 ea 112A 8490.000.004 No. 10 × 1˝ FH PH UC WS × 030 Hinge screws 100 ea 382B 8490.000.005 No. 12 × 1.25˝ FH PH UC WS × 030 Hinge screws 100 ea 433A 8490.000.006 No. 10-24 × .5˝ FH PH MS × 030 Hinge screws 100 ea 443B 8490.000.007 No. 12-24 × .5˝ FH PH MS × 030 Hinge screws 100 ea 304B 8490.00.010 No. 6 × .625˝ OH PH SMS × 040 Kick plate screws 200 ea 508A 8490.000.019 No. 8-32 Combination WS/MS Bread board screws for cabinet knobs 25 ea 508B 8490.000.020 No. 6-32 × .375˝ OH SL MS Switch plate screws 50 ea 178D 8490.000.022 No. 8 × .75˝ FH PH WS Latch/strike/DM backplate screws 50 ea 168E 8490.000.023 No. 8 × .375˝ FH PH SMS Screws for No. 5097 backplate 100 ea 229A 8490.000.024 No. 12 × 1˝ FH PH Comb. Mortise lock screws 50 ea 139B 8490.000.025 No. 4 × .75˝ RD SL WS × 040 Lock trim/house number screws 50 ea 139C 8490.000.026 No. 5 × .625˝ FH SL WS × 040 Lock trim screws 50 ea 3110A 8490.000.027 No. 6 × .5˝ OH SL WS × 040 Lock trim screws 100 ea 3210B 8490.000.028 No. 8 × .875˝ OH PH WS × 040 Lock trim screws 100 ea 2910C 8490.000.029 No. 10 × 2˝ OH SL WS × 030 Lock trim screws 20 ea 2711C 8490.000.032 No. 8-32 × .218˝ FH PH UC MS × 030 Armored front screws 20 ea 611D 8490.000.033 No. 3-32 × .218˝ FH PH UC MS × 260 Armored front screws 20 ea 611E 8490.000.034 No. 8-32 × .218˝ FH PH UC MS × 102 Armored front screws 20 ea 612A 8490.000.035 No. 10-24 × 2.125˝ OH PH MS × 030 Trim thru-bolts 20 ea 913A 8490.000.037 No. .25-20 UNC × .25˝ Socket set screws #0561 200 ea 8414A 8490.000.038 No. 8-32 × .5˝ FH PH MS Installation plate screws 100 ea 3714B 8490.000.039 No. 6-32 × .25˝ PAN SL MS Lock front beveling screws 20 ea 614C 8490.000.040 No. 8-32 × .25˝ FH PH U/C MS Lock lid screws 20 ea 615A 8490.000.041 Complete yoke assembly For 2.75˝ backset locks 2 ea 1315B 8490.000.042 Complete yoke assembly For 2.5˝ backset locks 2 ea 1316A 8490.000.043 Stop ball For all mortise locks 10 ea 616B 8490.000.044 Stop spring For all mortise locks 10 ea 617A 8490.000.045 Turn hub spring For 2.75˝ backset mortise locks 5 ea 618A 8490.000.047 Latch spring For 2.75˝ backset locks 5 ea 618B 8490.000.048 Lift lever spring For 2.75˝ backset handleset functions 5 ea 619A 8490.000.049 Anti-friction hinge pin All locks with anti-friction latch 10 ea 419B 8490.000.050 Wear washer For 2.5˝ & 2.75˝ B.S. emergency egress locks 10 ea 420B 8490.000.052 Hub lever spring For 2.5˝ backset locks 5 ea 621A 8490.000.053 Lift lever spring For 2.5˝ backset handleset functions 5 ea 621B 8490.000.054 Latch spring For 2.5˝ backset locks 5 ea 622A 8490.000.055 Turn hub spring For 1.5˝ & 2.0˝ backset locks 5 ea 622B 8490.000.056 Hub lever spring For 1.5˝ & 2.0 backset locks 5 ea 624B 8490.000.060 Cylinder yoke For 1.5˝ & 2.0˝ backset locks 2 ea 625A 8490.000.061 Cylinder set screw For 1.5˝ backset locks 2 ea 425B 8490.000.062 Cylinder set screw For 2.0˝ backset locks 2 ea 6Price139

MISCELLANEOUSCREMONE BOLTSCremone Bolts40.875˝(7´ Doors)52.875˝(8´ Doors)1.75˝ x 6.25˝38.875˝8105.xxxFOR ILLUSTRATION PURPOSES ONLY.TRIM AVAILABLE ON EXTERIOR SIDE.8105, 8106, & 8107.xxx Right Hand or Left Hand, 7 or 8 ft. units.SOLID FORGED BRASS CONSTRUCTIONCASE SIZE: 1.75˝ × 6.25˝ (44 × 159mm)BOLT DIMENSIONS: STANDARD 7 FT. LENGTHTop Rod: .625˝ × 40.875˝ (16 mm × 1.04m).Bottom Rod: .625˝ × 38.875˝ (16 × .99 m)STANDARD 8 FT. LENGTHTop Rod: .625˝ × 52.875˝ (16mm × 1.34)Bottom Rod: .625˝ × 38.875˝ (16mm × .99m)THROW: When engaged: both bolts extend .75˝ (19mm) into jamb and sill.GUIDES: 1.5˝ (38mm) wide. Decorative covers to conceal guides are available at an additional charge. Pleaseconsult price list.FASTENERS: Case is surface mounted with 4 No. 8 × 1.25˝ Oval Phillips Head Screws for added strength anddurability.STRIKES: Furnished with 3 Strikes, one Universal, one Angle, and one Mortise to meet various door conditions.SPINDLE: 1.375˝ (35mm) in length. (N0. 81054) A straight spindle must be ordered when trim is ordered forthe exterior side of the door.FEATURES: Often used as an elegant and functional addition to a pair of french doors with very narrow stileconditions. A typical application requires active cremone bolts mounted on each leaf of a pair ofdoors with no exterior access.Specify cremone bolt less knob (LK) or less lever (LL), and orderknob or lever minus rose (MR) of choice as a separate item.SPECIAL CONDITIONS: When specified, most trim as illustrated in Section F is available for the exteriorside to latch door. Indicate knob or lever to be furnished. Straight spindle mustbe purchased separately. In addition, for doors larger than 8ft. see Cremone Boltextension packets below.PACKED: One in a box with three strikes and the appropriate fasteners.Cremone Bolts are available in twosizes, one for doors up to and including 7 ft. (2.13m) and one for doors between 7 feet and 8 feet inheight, at an additional cost. A 42˝ centerline above the finished floor is considered standard with ourCremone Bolts.NOTE: Always specify hand of door as Knob/Lever trim will turn only in one direction. See diagram on pg.J/10 for handling details. To enable greater job site flexibility, exact sizing of Cremone Bolts can beaccomplished in the field. For doors larger than 8ft. in height, the addition of a Cremone Bolt extensionpacket is necessary. See table below.ORDERING INFORMATION: The final suffix numbers will indicate the following:Digit #1 of the suffix will indicate hand of the unit: either right (R) or left (L)Digit #2 of the suffix will indicate length: either 7’ or 8’Digits #3 & #4 of the suffix will indicate a cremone boltless knob (LK) or lever (LL).ORDERING EXAMPLES,KNOB/FUNCTION:ORDERING EXAMPLES,LEVER/FUNCTION:CREMONE BOLT EX-TENSION PACKETS:Order cremone bolt and separate line item for knob:8105.XXX.R7LK: Standard design 7’ Cremone bolt right hand less knob5000.XXX.IMR: 1 each 5000 knob minus roseOrder cremone bolt and separate line item for lever:8105.XXX.L7LL: Standard design 7’ Cremone bolt right hand less lever 1 each5125 lever left hand minus rose: 5152.XXX.LMR Nos. 8105, 8106 & 8107.XXX.R7/8R/LK are furnished with guides less knobs or levers.8106.XXX.E24 2 FT. Extension Packet - Ornamental Design8106.XXX.E48 4 FT. Extension Packet - Ornamental Design8107.XXX.E24 2 FT. Extension Packet - Contemporary Design8107.XXX.E48 4 FT. Extension Packet - Contemporary DesignThese packets contain all the parts necessary to extend the top rod length of stock 7ft. or 8ft. Cremone Bolts forspecial door situations. The following chart illustrates which item to order for a particular door size.NOTE: Extension packets are only available for Cremone Bolts with decorative covers. Not available for use with8105 Cremone Bolts.HANDING OF CREMONE BOLTS0310.xxx.ANGLAngle StrikeTIER 1 FINISHES: 102, 150TIER 2 FINISHES: 1510310.xxx.UNIV 0310.xxx.MORTUniversal Strike Mortise StrikeTIER 1 FINISHES: 102, 150Door Sizeup to 9 ft.up to 10 ft.up to 11 ft.up to 12 ft.above 12 ft.Stock parts to be orderedStandard 7 ft. Cremone Bolt and 2 ft. ExtensionStandard 8 ft. Cremone Bolt and 2 ft. ExtensionStandard 8 ft. Cremone Bolt and 4 ft. ExtensionStandard 8 ft. Cremone Bolt and 4 ft. ExtensionNot Available

MISCELLANEOUSCREMONE BOLTSCremone Bolts8105Item #Function031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 2640030550568105.xxx.R7LK(L7LK) Standard 7´ Doors $500 $5508105.xxx.R8LK(L8LK) Standard 8´ Doors 650* N/A8106, 8107.xxx Ornamental & Contemporary 7´ Doors (R7LK, L7LK) 600 6508106, 8107.xxx Ornamental & Contemporary 8´ Doors (R8LK, L8LK) 850* N/A8105.xxx.GD Cremone bolt rod guide 30** N/A8105.xxx.REPL Bottom replacement rod for all cremone bolts 150 1758105.xxx.7TOP Top replacement rod for cremone bolts for 7´ doors 100** N/A8105.xxx.8TOP Top replacement rod for cremone bolts for 8´ doors 150 N/A8105.xxx.R510/L510 Case assembly 150 1758106.xxx.CVR Ornamental cover for cremone & surface bolts8107.xxx.CVR Contemporary cover for cremone & surface bolts40 508106.xxx.E24 24˝ extension rod w/ornamental cover8107.xxx.E24 24˝ extension rod w/contemporary cover130 1558106.xxx.E48 48˝ extension rodw/ornamental cover8107.xxx.E48 48˝ extension rod w/contemporary cover200 225NOTE: 8105.xxx.8TOP is not available in 033 & 034.*Not available in 033, 034, 260 & 264**Not available in 260 & 264.81068105.xxx – Standard Cremone BoltFEATURES: Supplied without decorative covers for guides.NOTE: All 7´ Cremone Bolts are supplied with 4 guides and 8´ Cremone Bolts are supplied with 6 guides.Customer must purchase knob or lever, separately.8106.xxx – Ornamental Cremone BoltFEATURES: Similar to 8105 Cremone Bolts except that the guides are concealed with decorative coversfor a more elegant appearance.8107.xxx – Contemporary Cremone BoltFEATURES: Similar to 8105 Cremone Bolts except that the guides are concealed with decorative coversfor a more elegant appearance.8106 & 8107 CoversFEATURES: Covers available separately to facilitate stocking all designs.PACKED: Includes fasteners.WEIGHT: 8106: 2.7 lbs. (1.22kg)8107: 3 lbs. (1.36kg)Cremone bolts intended for use on INTERIOR doors only.Cremone bolt rod cannot be distressed.The following are recommended to match distressed finishes:402 = 102 452 = 151412 = 112NOTE: Cremone bolts are sold less knob/lever. Customers select Estate Collection knob or lever of their choice. Cremonemechanism is handed. Select cremone in same hand as door.81078106Ornamental8107Contemporary141

MISCELLANEOUSTOOLS & ACCESSORIES8472.000.001Cylinder Plug Follower8472.000.002Tweezers8472.000.003Depth Key Set8480.000Aligning ToolFor use in proper alignment of knobs,levers, roses and escutcheon withmortise locks/tubular latches.8481.000.001Allen WrenchFor installation of set screws onall knobs and levers.8484.000Lock Reversing BlockFEATURES: Provides means to alignand secure mortise locks to facilitatereversing of handed internal parts.PACKED: One in a box.WEIGHT PER BOX: .9 lb. (.41kg)Item # Description Price6707.009 Cylinder reinforcing plug $78472.000.001 Cylinder plug follower included with keying kits8472.000.002 Tweezers for gripping cylinder pins included w/8472 kit388472.000.003 Depth key set, furnished with 10 keys (0 thru 9 depths)8474.000.000 Alignment bushing (Bag of 50) 158480.000 Aligning tool. Used to align back plates & escutcheons w/locks 128481.000.001 1/8˝ alan wrench used to tighten set screws 58484.000 Lock reversing block. Simplifies changing hand of mortise locks 15.39 NETKeying KitsItem # Description Finish Price8471.000 Small keying kit for keying (C) cylinders alike 000 $1058472.000Large keying kit for all (C)keyingapplications inc. master keying000 4908320.009.101 #1 top pins (100 each per pack)8320.009.102 #2 top pins (100 each per pack)8320.009.103 #3 top pins (100 each per pack)8320.009.202 #2 master pins (100 each per pack)8320.009.203 #3 master pins (100 each per pack)8320.009.204 #4 master pins (100 each per pack)009 238320.009.205 #5 master pins (100 each per pack)8320.009.206 #6 master pins (100 each per pack)8320.009.207 #7 master pins (100 each per pack)8320.009.208 #8 master pins (100 each per pack)8320.009.209 #9 master pins (100 each per pack)8320.152.300 #0 bottom pins (100 each per pack)8320.152.301 #1 bottom pins (100 each per pack)8320.152.302 #2 bottom pins (100 each per pack)8320.152.303 #3 bottom pins (100 each per pack)8320.152.304 #4 bottom pins (100 each per pack)8320.152.305 #5 bottom pins (100 each per pack)152 238320.152.306 #6 bottom pins (100 each per pack)8320.152.307 #7 bottom pins (100 each per pack)8320.152.308 #8 bottom pins (100 each per pack)8320.152.309 #9 bottom pins (100 each per pack)8320.152.401 Hotel pin8300.109.005 Tumbler springs 1098300.009.0065 Spring covers 009278300.009.0066 Spring covers 0098300.509.STD Standard cams8300.509.AR Adams rite cams509 78300.509.004 Cam mounting screws 509 318313.329.TPH1 Tailpiece (regular)8313.329.TPH2 Tailpiece (long)329 78313.509.008 Mounting plate8313.509.009 Mounting screws509 38333.009.007 Tailpiece plate8333.009.010 Spacer009 58472.000.001 Cylinder plug follower 000 388011.028.0025 Washer 028 38011.039.0027 Cap 039 48053.028.TP1 Tailpiece - double cylinder8053.028.TP2 Tailpiece - emergency exit8053.028.TP3* Tailpiece - single cylinder for 1 ³⁄8˝ door thickness028 38053.028.TP4 Tailpiece - single cylinder for 1 ¾˝ door thickness8475.000.001 Cap tool 000 58472.000.004 Shim 000 28011.039.0023 Pins 039 28011.109.0022 Springs 109 28472.000.006 Key gauge 000 128472.000.002 Tweezers 000 379935.999 Stile-right template 999 309940.000.A Finish demonstrator 000 35***NOTE: 8053.028.TP3 Tailpiece for doors 1 3/8˝ thick is not supplied as a standardcomponent of the kit but can be ordered separately.**Net Price

MISCELLANEOUSSLIDING DOOR LOCKSSliding Door Locks8570 & 8575Passage8580 & 8585PrivacyItem # Description Door Thickness Wt.8570.xxx Passage 1.375˝ 2.38575.xxx Passage 1.75˝ 2.58580.xxx Privacy 1.375˝ 2.48585.xxx Privacy 1.75˝ 2.58581.xxx Patio 1.375˝ 2.48586.xxx Patio 1.75˝ 2.58590.xxx Entrance 1.375˝ 2.98595.xxx Entrance 1.75˝ 3.08591.xxx Double Cylinder 1.375˝ 3.38596.xxx Double Cylinder 1.75˝ 34030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$400 $425460 4858571.xxx Dummy 1.375˝ & 1.75˝ 2.0 45 508570.xxx.ADAP Knob/Lever Adaptor .15 20 25PACKED: Includes necessary fastenersDOOR THICKNESS: Sliding Door Locks only fit 1.375˝ and 1.75˝ doorsother door thickness are not available.Entry functions include cylinder.Split finishes subject to 5% list price adder.8581 & 8586PatioDescriptionsPASSAGE: Latch bolt by lever either side.PRIVACY: Latch bolt by lever either side, except when locked by turn piece inside.Furnished with Emergency Key No. 0417 for unlocking outside.PATIO: Latch bolt by lever either side, except when locked by turn piece inside.ENTRANCE: Latch bolt by lever either side, except when locked by cylinder outside or turn piece inside.Turn piece must be used for locking to prevent accidental lockouts.8590 & 8595EntranceDOUBLE CYLINDER: Latch bolt by lever either side, except when locked by cylinder outsideor cylinder inside. Blocking rings required for proper cylinderoperation on 1.375˝ and 1.750˝ thick doors.IMPORTANT: For cylinder clearance, a minimum pocket width of 2.50˝ (54mm) is required.DUMMY: Designed to be used as pulls on the inactive leaf of double sliding doors.PACKED: Sold individually.8591 & 8596Double CylinderKNOB/LEVER ADAPTOR: Designed to be used to adapt a lever or a knob to a sliding door lock.PACKED: Set contains parts to modify one side of a sliding door lock; one spindle, one rose, and installationinstructions.NOTE: Lever or Knob must be purchased separately. Use a solid spindle if knob or lever is installed onboth sides.1.5˝ (38mm) BACKSET—SPECIFICATIONSFEATURES: Sliding door locks are designed with a heavy gauge steel case for maximum Strength.Component parts are made primarily of solid forged brass, accurately machined fora lifetime of smooth operation. Flush edge pull provides convenient door mobility in pocketapplication. Fully reversible for right and left hand doors.STEEL CASE: 0.75˝ × 2.5˝ × 5.5˝ (19 × 64 × 140mm)8571DummyFRONT: 1˝ × 8˝ (25 × 203mm). Available in widths of 1.375˝ (35mm) or 1.75˝ (44mm),depending on thickness of door.BACKSET: 1.5˝ (38mm)STRIKE: .5˝ × 1.25˝ (13 × 32mm) × .937˝ (24mm) projection.CYLINDER: Standard mortise type 03 keyway and two nickel silver keys. Locks are furnished with a 1˝(25mm) length cylinder unless specified otherwise. Optional keyways available;refer to Section K.8570.xxx.ADAPKnob/Lever AdaptorPREPARATION: 2.562˝ (65mm) deep × 5.75˝ (146mm) high cut-out is required.NOTE: Caution should be taken when using this unit on pairs of sliding doors where security is a concern.A keyed function must be used.Lock Mechanism Cut-Out Cut-Away & Strike143

MISCELLANEOUSGARDEN DOOR TRIM5970 HamiltonGliding Door TrimItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4521.31˝(33.3mm).28˝(7.1mm)5970.xxx.BPG25970.xxx.FDGHamilton Active Gliding Door TrimHamilton Dummy Gliding Door Trim$320 $3504.56˝(115.8mm)2.12˝(53.8mm)8.59˝(218.2mm)1.81˝(46.0mm)INSIDEOUTSIDE5971 BoulderGliding Door TrimItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4521.31˝(33.3mm).28˝(7.1mm)5971.xxx.BPG25971.xxx.FDGBoulder Active Gliding Door TrimBoulder Dummy Gliding Door Trim$320 $3504.56˝115.9mm)2.23˝(56.5mm)8.59˝(218.3mm)1.66˝(42.1mm)INSIDEOUTSIDE5975 ConcordGliding Door TrimItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4521.31˝(33.3mm).28˝(7.1mm)5975.xxx.BPG25975.xxx.FDGConcord Active Gliding Door TrimConcord Dummy Gliding Door Trim$320 $3504.00˝(101.6mm)8.00˝(203.2mm)1.55˝(39.4mm)INSIDEOUTSIDE2.13˝(54.1mm)NOTE: Baldwin Garden Door hardware is designed exclusively foruse with Andersen® doors & is not offered in split finishes.

MISCELLANEOUSGARDEN DOOR TRIM5976 CodyGliding Door Trim1.31˝(33.3mm).28˝(7.1mm)Item #5976.xxx.BPG25976.xxx.FDGDescriptionCody Active Gliding Door TrimCody Dummy Gliding Door Trim030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$320 $3504.00˝(101.6mm)2.23˝(56.5mm)8.00˝(203.2mm)1.66˝(42.1mm)INSIDEOUTSIDE5970, 5975Exterior Locking Cylinder HousingsItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 4525970.xxx.CHG5975.xxx.CHGHamilton/Boulder Exterior Cylinder HousingConcord/Cody Exterior Cylinder Housing$75 $855970 5975NOTE: Locking cylinder housings do not include cylinder and keys. Cylinder and keys from customer’sexisting lock must be used. If new installation, cylinder and keys must be purchased from Andersen ® .145NOTE: Baldwin Garden Door hardware is designed exclusively foruse with Andersen® doors & is not offered in split finishes.

MULTI-POINTHOW TO ORDERBristol – MP009Richland – MP011Lakeshore – MP013Springfield – MP001Bismark – MP002Boulder – MP016Cody – MP015Concord – MP004Kensington – MP003MORTISEMPM TMULTI-POINTTUBULARWatch for this icon as your quickguide to coordinating Baldwin lockhardware throughout your home.Your favorite Baldwin styles are nowavailable in Mortise for entranceneeds, Tubular for entrance/interiors,AND Multi-Point for patio doors!PROFILE CYLINDERSRECOMMENDED FINISHES ORIGINAL FINISHES040 003, 030, 031, 033, 034, 060, 040, 050112 412, 102, 190, 402, 112264 055, 056, 150, 151, 260, 264, 452AMERICAN CYLINDERSRECOMMENDED FINISHES ORIGINAL FINISHES040 003, 030, 031, 033, 034, 040, 050, 060, 102,112, 190, 402, 412,264 055, 056, 150, 151, 260, 264, 452> FITS 92 AND 105 MM CYLINDERTO LEVER C.T.C.> ESTATE COLLECTION FINISHOPTIONS TO SUIT ANY HOME.> PROFILE OR AMERICAN CYLINDER.> AVAILABLE AS COMPLETE SETS, MINUSLEVER SETS, OR CHOOSE YOUR OWNLEVER STYLE TO BUILD A SET.> EASY INSTALLATION WITH ONE-BOX SHIPPING AND CYLINDER/HARDWARE FOR 1.75˝ THICK DOOR.> THROUGH-BOLT MOUNTING.> THICK DOOR KITS AVAILABLE.> ALL PROFILE AND AMERICAN CYLINDERSARE FIELD KEYABLE TO BALDWIN KEYWAY.> 112 FINISH NOW AVAILABLE FORALL PROFILE CYLINDERS

STEP 1PICK YOUR MULTI-POINT TRIMMULTI-POINTHOW TO ORDEREXAMPLE #MP004 . xxx . xxxxTrim CodeMP001MP002MP003MP004MP009MP011MP013MP015MP016DescriptionSpringfield Multi-Point TrimBismark Multi-Point TrimKensington Multi-Point TrimConcord Multi-Point TrimBristol Multi-Point TrimRichland Multi-Point TrimLakeshore Multi-Point TrimCody Multi-Point TrimBoulder Multi-Point TrimSTEP 2CHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxx1Configuration # Description Measurement PageConfiguration 1 Profile Cylinder Below Handle 92mm CTC, 8.5˝ Mounting Hole CTC 146Configuration 2 American Cylinder Above Handle 105mm CTC, 8.5˝ Mounting Hole CTC 148Configuration 3 American Cylinder Below Handle 92mm CTC, 8.375˝ Mounting Hole CTC 150Configuration 4 Profile Cylinder Below Handle 92mm CTC, 7.875˝ Mounting Hole CTC 152Configuration 5 American Cylinder Above or Below Handle 92mm CTC, 7.5625˝ Mounting Hole CTC 154Configuration 6 American Cylinder Above Handle 92mm CTC, 7.25˝ Mounting Hole CTC 156STEP 3CHOOSE YOUR FUNCTIONEXAMPLE #MP004 . xxx . ACTFunction Code DescriptionACTEntry, keyed w/ turnknob (supplied w/ cylinder for 1 ¾˝ door thickness)FDPPassage, active, no cylinder or turnknobAINInactive outside and active inside- non-keyedFD Inactive, non-keyedPATPatio, non-keyedSTEP 4SPECIFY MINUS LEVER OPTION, IF DESIRED:EXAMPLE #MP004 . xxx . ACTxAdd “x” to suffix for minus lever option.Otherwise trim ships with stock lever choice as shown.Examples:MP001 . 102 . ACT3xSpringfield Multi-Point Trim102 (Oil Rubbed Bronze) FinishMinus LeverDoor Configuration #3Active Entry FunctionMP004 . 402 . PAT4Concord Multi-Point Trim402 (Distressed Oil Rubbed Bronze) Finish Door Configuration #4Patio FunctionSTEP 5IF A LEVER OTHER THAN THE STANDARD IS DESIREDOrder a trim without levers and order levers separately.STEP 6IF SPLIT FINISHOrder escutcheons, levers, and corresponding thick door kits separately.147

MULTI-POINTHOW TO ORDER - STEP 1STEP 1MULTI-POINTTIER 1PICK YOUR MULTI-POINT TRIMEXAMPLE #MP004 . xxx . xxxxSpringfield – MP0015455 lever included2.0˝.3˝2.3˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝Bismark – MP0025152 lever included1.75˝1.3˝.4˝2.3˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝Concord – MP0045445 lever included2.0˝1.5˝.3˝2.1˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝Lakeshore – MP0135162 lever included1.7˝1.3˝.5˝2.9˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝Cody – MP0155452 lever included2.0˝1.3˝.5˝2.9˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝1.3˝

MULTI-POINTHOW TO ORDER - STEP 1Boulder – MP0165452 lever included2.0˝.3˝2.3˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11.9˝1.3˝Kensington – MP0035108 lever included2.2˝MULTI-POINTTIER 2.4˝2.3˝Profile CylinderBelow HandleAmerican CylinderAbove & Below12.7˝1.5˝Bristol – MP0095104 lever included2.0˝.3˝2.3˝Profile CylinderBelow HandleAmerican CylinderAbove & Below11˝1.5˝Richland – MP0115190 lever included2.1˝.4˝2.2˝Profile CylinderBelow HandleAmerican CylinderAbove & Below12˝1.4˝149

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 1STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx1Configuration # DescriptionConfiguration 1 Profile Cylinder Below Handle —3 5 ⁄8˝ (92 mm) center to center8 ½˝ center to center mounting hole locationSTEP 3 CHOOSE YOUR FUNCTION — CONFIGURATION #1EXAMPLE #MP004 . xxx . ACT1ACT1Entrance Profi le CylinderFDP1PassageAIN1Half Inactive/Half PassageBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1Item # DescriptionEntrance Profile Cylinder Multi-pointACT1 Entry - Keyed W/ TurnknobPassage Multi-pointFDP1 Passage - Active No Cylinder or TurnknobHalf Inactive / Half Passage Multi-pointAIN1 Inactive Outside And Active Inside – Non-keyedFull Inactive Multi-pointFD1 Inactive - Non-keyedPatio Multi-pointPAT1 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI1 KN, Cut for Knob InsideKNIR1 KN, Cut for Knob Inside - Rigid LeverKNO1 KN, Cut for Knob OutsideKNOR1 KN, Cut for Knob Outside - Rigid LeverKC1 KC, Cut for Cylinder Outside - Pro C1KCT1 KC, Cut for Cylinder Inside - Pro C1030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$550 $625 $405 $460450 525 305 360$190 220 — —210 240 — —FD1Full InactivePAT1PatioKensington, Bristol, RichlandTier 2Item # DescriptionEntrance Profile Cylinder Multi-pointACT1 Entry - Keyed W/ TurnknobPassage Multi-pointFDP1 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN1 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD1 Inactive - Non-keyedPatio Multi-pointPAT1 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI1 KN, Cut for Knob InsideKNIR1 KN, Cut for Knob Inside - Rigid LeverKNO1 KN, Cut for Knob OutsideKNOR1 KN, Cut for Knob Outside - Rigid LeverKC1 KC, Cut for Cylinder Outside - Pro C1KCT1 KC, Cut for Cylinder Inside - Pro C1030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$600 $675 $455 $510500 575 355 410$210 240 — —230 260 — —

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 1STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #1EXAMPLE #MP000 . xxx . ACTDThick Door KitsTier 1 & Tier 2Includedw/standard setsACT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝ List PriceAll others MP000.xxx.ACTD MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTG $120Bismark, Kensington, Lakeshore MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTI $120PAT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝All others MP000.xxx.PATJ MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATM $120Bismark, Kensington, Lakeshore MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATO $120AIN Sets 1 ¾˝ – 2 ¼˝ 2 3 ⁄8˝ – 2 ¾˝MP000.000.AINS — — MP000.000.AINT — — $25FD Sets 1 ¾˝ – 2 ¼˝ 2 3 ⁄8˝ – 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25FDP Sets 1 ¾˝ – 2 ¼˝ 2 3 ⁄8˝ – 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25> Baldwin Multi-Point Active & Patio trims assume 1.75˝ door thickness.For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted.> Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze).> See finish chart on page 176 for cylinder finish recommendations.ACT kits include:PAT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation HardwareHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle151Stainless Steel levers are not compatible with Multi-Point.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 2STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx2Configuration # DescriptionConfiguration 2 American Cylinder Above Handle —4 1 ⁄8˝ (105 mm) center to center8 ½˝ center to center mounting hole locationSTEP 3CHOOSE YOUR FUNCTION — CONFIGURATION #2EXAMPLE #MP004 . xxx . ACT2ACT2Entrance American CylinderFDP2PassageAIN2Half Inactive/Half PassageFD2Full InactivePAT2PatioBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040Item # Description050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Entrance American Cylinder Multi-pointACT2 Entry - Keyed W/ Turnknob105 MM Double DoorFWHAP Double Door Entry - 1 Keyed, 1 InactivePassage Multi-pointFDP2 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN2 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD2 Inactive - Non-keyedPatio Multi-pointPAT2 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI2 KN, Cut for Knob InsideKNIR2 KN, Cut for Knob Inside - Rigid LeverKNO2 KN, Cut for Knob OutsideKNOR2 KN, Cut for Knob Outside - Rigid LeverKCA2 KC, Cut for Cylinder Outside - Ande C2 220 250KTA2 KT, Cut for Turnpiece Inside - Ande C2 210 240Kensington, Bristol, RichlandTier 2Item # DescriptionEntrance American Cylinder Multi-pointACT2 Entry - Keyed W/ TurnknobPassage Multi-pointFDP2 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN2 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD2 Inactive - Non-keyedPatio Multi-pointPAT2 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI2 KN, Cut for Knob InsideKNIR2 KN, Cut for Knob Inside - Rigid LeverKNO2 KN, Cut for Knob OutsideKNOR2 KN, Cut for Knob Outside - Rigid LeverWithout Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$575 $650 $430 $4851025 1100 880 935450 525 305 360$190 $220 — —030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452— —Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$625 $700 $480 $535500 575 355 410$210 240KCA2 KC, Cut for Cylinder Outside - Ande C2 240 270KTA2 KT, Cut for Turnpiece Inside - Ande C2 230 260

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 2STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #2EXAMPLE #MP000 . xxx . ACTRThick Door KitsTier 1 & Tier 2Includedw/standard setsACT2* 1 ¾ List PriceMP000.xxx.ACTR* — $115AIN Sets 1.75˝MP000.000.AINS — $25AIN Sets 2˝ to 2 ¼˝ 2 3 ⁄8˝ to 3˝MP000.000.AINS MP000.000.AINT $25FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ $25> Specify cylinder finish where noted.> *ACT2 - Finish matches trim exactly (any of the Baldwin Estate finishes)ACT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder,and Cylinder Installation HardwareHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle105 MM Double DoorBoulder, Cody, Concord, Springfi eld1.73˝1.63˝Item #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452SpringfieldMP001CodyMP015FWHAP Active & Inactive Set $1025 1175FWHAX Active & Inactive Set w/o Levers 735 84511.09˝1.63˝(100.8mm) 3.97˝( )10.13˝1.59˝(106.3mm) 4.19˝NOTE:> Boulder, Cody, Concord, Springfield Double Door Applications Only — Due to the special fit requirementsof applying these four 105mm CTC styles in a double door application, the modified dimensionsshown below apply to these four styles for double door applications only. Please specify function ‘FWHAP’or ‘FWHAX’ to order. Pricing is as shown.> Due to the width of the escutcheon plates, Bristol, Richland and Kensington are not recommended ondouble door applications for 105mm CTC confirgurations.> The standard Bismark and Lakeshore plates can be used on double door applications for 105mm CTCconfigurations.ConcordMP004BoulderMP01610.13˝ )4.00˝(106.3mm)(101.6mm)4.19˝4˝10.88˝153Stainless Steel levers are not compatible with Multi-Point.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 3STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx3Configuration # DescriptionConfiguration 3 American Cylinder Below Handle —3 5 ⁄8˝ (92 mm) center to center8 ³⁄8˝ center to center mounting hole locationSTEP 3 CHOOSE YOUR FUNCTION — CONFIGURATION #3EXAMPLE #MP004 . xxx . ACT3ACT3Entrance American CylinderFDP3PassageAIN3Half Inactive/Half PassageBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040Item # Description050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Entrance American Cylinder Multi-pointACT3 Entry - Keyed W/ TurnknobPassage Multi-pointFDP3 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN3 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD3 Inactive - Non-keyedPatio Multi-pointPAT3 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI3 KN, Cut for Knob InsideKNIR3 KN, Cut for Knob Inside - Rigid LeverKNO3 KN, Cut for Knob Outside$190 220KNOR3 KN, Cut for Knob Outside - Rigid LeverKC3 KC, Cut for Cylinder Outside - American C3 220 250KT3 KT, Cut for Turnpiece Inside - American C3PKT3 Patio KT, Cut for Turnpiece Inside - C3210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$575 $650 $430 $485450 525 305 360FD3Full InactivePAT3PatioKensington, Bristol, RichlandTier 2030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Item # DescriptionEntrance American Cylinder Multi-pointACT3 Entry - Keyed W/ Turnknob$625 $700 $480 $535Passage Multi-pointFDP3 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN3 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-point500 575 355 410FD3 Inactive - Non-keyedPatio Multi-pointPAT3 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI3 KN, Cut for Knob InsideKNIR3 KN, Cut for Knob Inside - Rigid LeverKNO3 KN, Cut for Knob Outside$210 240KNOR3 KN, Cut for Knob Outside - Rigid LeverKC3 KC, Cut for Cylinder Outside - American C3 240 270KT3 KT, Cut for Turnpiece Inside - American C3PKT3 Patio KT, Cut for Turnpiece Inside - C3230 260

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 3STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #3EXAMPLE #MP000 . xxx . ACTAThick Door KitsTier 1 & Tier 2Includedw/standard setsACT3 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ½˝ 2 ¾˝ List PriceMP000.xxx.ACTA MP000.xxx.ACTB MP000.xxx.ACTC $115PAT3 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25AIN Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.AINS MP000.000.AINT — $25FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25> Config #3 Multi-Point come standard for 1 3/4” to 2 1/4” door thickness. Forthicker doors, please order a Thick Door kit according to the chart above.> Specify cylinder finish where noted. Available cylinder finishes include264 (Satin Chrome) and 040 (Satin Brass) ONLY.> See finish chart on page 176 for cylinder finish recommendations.ACT kits include:PAT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder,and Cylinder Installation Hardware8mm to 7.3mm Conversion SpindleHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle155Stainless Steel levers are not compatible with Multi-Point.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 4STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx4Configuration # DescriptionConfiguration 4 Profile Cylinder Below Handle —3 5 ⁄8˝ (92 mm) center to center7 7 ⁄8˝ center to center mounting hole locationSTEP 3CHOOSE YOUR FUNCTION — CONFIGURATION #4EXAMPLE #MP004 . xxx . ACT4ACT4Entrance Profi le CylinderFDP4PassageAIN4Half Inactive/Half PassageBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040Item # Description050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Entrance Profile Cylinder Multi-pointACT4 Entry - Keyed W/ TurnknobPassage Multi-pointFDP4 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN4 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD4 Inactive - Non-keyedPatio Multi-pointPAT4 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI4 KN, Cut for Knob InsideKNIR4 KN, Cut for Knob Inside - Rigid LeverKNO4 KN, Cut for Knob Outside$190 220KNOR4 KN, Cut for Knob Outside - Rigid LeverKC4 KC, Cut for Cylinder Outside - Pro C4KCT4 KC, Cut for Cylinder Inside - Pro C4210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$550 $625 $405 $460450 525 305 360FD4Full InactivePAT4PatioKensington, Bristol, RichlandTier 2Item # DescriptionEntrance Profile Cylinder Multi-pointACT4 Entry - Keyed W/ TurnknobPassage Multi-pointFDP4 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN4 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD4 Inactive - Non-keyedPatio Multi-pointPAT4 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI4 KN, Cut for Knob InsideKNIR4 KN, Cut for Knob Inside - Rigid LeverKNO4 KN, Cut for Knob OutsideKNOR4 KN, Cut for Knob Outside - Rigid LeverKC4 KC, Cut for Cylinder Outside - Pro C4KCT4 KC, Cut for Cylinder Inside - Pro C4030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$600 $675 $455 $510500 575 355 410$210 $240230 260

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 4STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #4EXAMPLE #MP000 . xxx . ACTDThick Door KitsTier 1 & Tier 2Includedw/standard setsACT4 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝ List PriceAll others MP000.xxx.ACTD MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTG $120Bismark, Kensington, Lakeshore MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTI $120PAT4 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝All others MP000.xxx.PATJ MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATM $120Bismark, Kensington, Lakeshore MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATO $120AIN Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.AINS — — MP000.000.AINT — — $25FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25> Config #4 Multi-Point Active and Patio trims assume 1.75˝ door thickness. For thicker doors, please order a Thick Door kit according to the chart above.Specify cylinder finish where noted.> Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze).> See finish chart on page 176 for cylinder finish recommendations.ACT kits include:PAT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle, Patio Cylinder and Cylinder Installation HardwareHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle157Stainless Steel levers are not compatible with Multi-Point.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 5STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx5Configuration # DescriptionConfiguration 5 American Cylinder Above or Below Handle —3 5 ⁄8˝ (92 mm) center to center7 9 ⁄16˝ center to center mounting hole locationSTEP 3CHOOSE YOUR FUNCTION — CONFIGURATION #5EXAMPLE #MP004 . xxx . ACT5ACT5Entrance American CylinderFDP5PassageAIN5Half Inactive/Half PassageBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040Item # Description050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Entrance American Cylinder Multi-pointACT5 Entry - Keyed W/ TurnknobPassage Multi-pointFDP5 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN5 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD5 Inactive - Non-keyedPatio Multi-pointPAT5 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI5 KN, Cut for Knob InsideKNIR5 KN, Cut for Knob Inside - Rigid LeverKNO5 KN, Cut for Knob Outside$190 220KNOR5 KN, Cut for Knob Outside - Rigid LeverKC5 KC, Cut for Cylinder Outside - American C5 220 250KT5 KT, Cut for Turnpiece Inside - American C5PKT5 Patio KT, Cut for Turnpiece Inside - C5210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$575 650 430 485450 525 305 360FD5Full InactivePAT5PatioKensington, Bristol, RichlandTier 2030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Item # DescriptionEntrance American Cylinder Multi-pointACT5 Entry - Keyed W/ Turnknob$625 700 480 535Passage Multi-pointFDP5 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN5 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-point500 575 355 410FD5 Inactive - Non-keyedPatio Multi-pointPAT5 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI5 KN, Cut for Knob InsideKNIR5 KN, Cut for Knob Inside - Rigid LeverKNO5 KN, Cut for Knob Outside$210 240KNOR5 KN, Cut for Knob Outside - Rigid LeverKC5 KC, Cut for Cylinder Outside - American C5 240 270KT5 KT, Cut for Turnpiece Inside - American C5PKT5 Patio KT, Cut for Turnpiece Inside - C5230 260NOTE: #5 cylinder to spindle orientation is reversible, works for bothabove and below handle mounting.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 5STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #5EXAMPLE #MP000 . xxx . ACTAThick Door KitsTier 1 & Tier 2Includedw/standard setsACT5 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ½˝ 2 ¾˝ List PriceMP000.xxx.ACTA MP000.xxx.ACTB MP000.xxx.ACTC $115PAT5 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25AIN Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.AINS MP000.000.AINT — $25FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25> Config #5 Multi-Point trims come standard for 1 3/4” to 2 1/4”door thickness. For thicker doors,please order a Thick Door kit according to the chart above. Specify cylinder finish where noted.> Available cylinder finishes include 264 (Satin Chrome) and 040 (Satin Brass) ONLY.> See finish chart on page 176 for cylinder finish recommendations.ACT kits include:PAT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder,and Cylinder Installation Hardware8mm to 7.3mm Conversion SpindleHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle159Stainless Steel levers are not compatible with Multi-Point.

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 6STEP 1STEP 2PICK YOUR MULTI-POINT TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx6Configuration # DescriptionConfiguration 6 American Cylinder Above Handle —3 5 ⁄8˝ (92 mm) center to center7 ¼˝ center to center mounting hole locationSTEP 3 CHOOSE YOUR FUNCTION — CONFIGURATION #6EXAMPLE #MP004 . xxx . ACT6ACT6Entrance American CylinderFDP6PassageAIN6Half Inactive/Half PassageBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040Item # Description050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Entrance American Cylinder Multi-pointACT6 Entry - Keyed W/ TurnknobPassage Multi-pointFDP6 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN6 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-pointFD6 Inactive - Non-keyedPatio Multi-pointPAT6 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI6 KN, Cut for Knob InsideKNIR6 KN, Cut for Knob Inside - Rigid LeverKNO6 KN, Cut for Knob Outside$190 220KNOR6 KN, Cut for Knob Outside - Rigid LeverKC6 KC, Cut for Cylinder Outside - American C6 220 250KT6 KT, Cut for Turnpiece Inside - American C6PKT6 Patio KT, Cut for Turnpiece Inside - C6210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$575 650 430 485450 525 305 360FD6Full InactivePAT6PatioKensington, Bristol, RichlandTier 2030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Item # DescriptionEntrance American Cylinder Multi-pointACT6 Entry - Keyed W/ Turnknob$625 700 480 535Passage Multi-pointFDP6 Passage - Active No Cylinder Or TurnknobHalf Inactive / Half Passage Multi-pointAIN6 Inactive Outside And Active Inside - Non-keyedFull Inactive Multi-point500 575 355 410FD6 Inactive - Non-keyedPatio Multi-pointPAT6 Patio - Non-keyedMulti-point, Escutcheons ONLYKNI6 KN, Cut for Knob InsideKNIR6 KN, Cut for Knob Inside - Rigid LeverKNO6 KN, Cut for Knob Outside$210 240KNOR6 KN, Cut for Knob Outside - Rigid LeverKC6 KC, Cut for Cylinder Outside - American C6 240 270KT6 KT, Cut for Turnpiece Inside - American C6PKT6 Patio KT, Cut for Turnpiece Inside - C6230 260

MULTI-POINTHOW TO ORDER, CONFIGUR ATION 6STEP 3 (CONT) THICK DOOR KIT — CONFIGURATION #6EXAMPLE #MP000 . xxx . ACTAThick Door KitsTier 1 & Tier 2Includedw/standard setsACT5 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ½˝ 2 ¾˝ List PriceMP000.xxx.ACTA MP000.xxx.ACTB MP000.xxx.ACTC $120PAT5 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25AIN Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.AINS MP000.000.AINT — $25FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP MP000.000.FDPTQ — $25> Config #6 Multi-Point trims come standard for 1 3/4˝ to 2 1/4” door thickness. For thicker doors,please order a Thick Door kit according to the chart above. Specify cylinder finish where noted.> Available cylinder finishes include 264 (Satin Chrome) and 040 (Satin Brass) ONLY.> See finish chart on page 176 for cylinder finish recommendations.ACT kits include:PAT kits include:AIN kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder,and Cylinder Installation Hardware8mm to 7.3mm Conversion SpindleHalf spindle, and Spindle Installation Hardware8mm to 7.3mm Conversion Spindle161Stainless Steel levers are not compatible with Multi-Point.

EUROPEAN MORTISEHOW TO ORDER, EUROPEAN MORTISESTEP 1PICK YOUR MORTISE TRIMEXAMPLE #MP004 . xxx . xxxxTrim CodeMP001MP002MP003MP004MP009MP011MP013MP015MP016DescriptionSpringfield European Mortise TrimBismark European Mortise TrimKensington European Mortise TrimConcord European Mortise TrimBristol European Mortise TrimRichland European Mortise TrimLakeshore European Mortise TrimCody European Mortise TrimBoulder European Mortise TrimSTEP 2CHOOSE YOUR DOOR CONFIGURATIONConfiguration # Description Measurement PageConfiguration 7 European Mortise 72mm CTC,Configuration 8 European Mortise 85mm CTC,EXAMPLE #MP004 . xxx . xxx7STEP 3CHOOSE YOUR FUNCTIONFunction Code DescriptionACTEntry, keyed w/ turnknob (supplied w/ cylinder for 1 ¾˝ door thickness)FDPPassage, active, no cylinder or turnknobAINInactive outside and active inside- non-keyedFD Inactive, non-keyedPATPatio, non-keyedEXAMPLE #MP004 . xxx . ACTSTEP 4SPECIFY MINUS LEVER OPTION, IF DESIRED:EXAMPLE #MP004 . xxx . ACTxAdd “x” to suffix for minus lever option.Otherwise trim ships with stock lever choice as shown.Examples:MP001 . 102 . ACT7xSpringfield European Mortise Trim102 (Oil Rubbed Bronze) FinishMinus LeverDoor Configuration #7Active Entry FunctionMP004 . 402 . PAT8Concord European Mortise Trim402 (Distressed Oil Rubbed Bronze) Finish Door Configuration #8Patio FunctionSTEP 5IF A LEVER OTHER THAN THE STANDARD IS DESIREDOrder a trim without levers and order levers separately.STEP 6IF SPLIT FINISH, ORDER COMPONENTS SEPARATELYEscutcheon, lever, kit will be priced separatelyRECOMMENDED CYLINDER FINISHESRECOMMENDED FINISHES ORIGINAL FINISHES040 003, 030, 031, 033, 034, 060, 040, 050112 412, 102, 190, 402, 112264 055, 056, 150, 151, 260, 264, 452

STEP 1PICK YOUR MORTISE TRIMEUROPEAN MORTISEHOW TO ORDER, STEP 1EXAMPLE #MP004 . xxx . xxxxMortise – Tier 1Bismark – MP0025152 lever included1.75˝.4˝2.3˝Boulder – MP0165452 lever included2.0˝.3˝2.3˝11˝11.9˝1.5˝1.3˝Cody – MP0155452 lever included2.0˝.5˝2.9˝Concord – MP0045445 lever included2.0˝.3˝2.1˝11˝11˝1.3˝1.3˝Lakeshore – MP0135162 lever included1.7˝.5˝2.9˝Springfield – MP0015455 lever included2.0˝.3˝2.3˝11˝11˝1.3˝1.3˝Mortise – Tier 2Kensington – MP0035108 lever included2.2˝.4˝2.3˝Bristol – MP0095104 lever included.3˝2.3˝12.7˝1.5˝Richland – MP0115190 lever included2.1˝.4˝1.5˝2.2˝12˝1.4˝163

EUROPEAN MORTISEHOW TO ORDER, CONFIGUR ATION 7STEP 1STEP 2PICK YOUR MORTISE TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx7Configuration # DescriptionConfiguration 7 European Mortise Cylinder — 72mm center to center215.9 mm center to center mounting hole locationSTEP 3CHOOSE YOUR FUNCTION — CONFIGURATION #7EXAMPLE #MP004 . xxx . ACT7ACT7Entrance Mortise CylinderFDP7PassageFD7Full InactiveBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description190, 260, 264 412, 452Entrance Mortise Cylinder European MortiseACT7 Entry - Keyed W/ TurnknobPassage European MortiseFDP7 Passage - Active No Cylinder Or TurnknobFull Inactive European MortiseFD7 Inactive - Non-keyedPatio European MortisePAT7 Patio - Non-keyedEscutcheons ONLYKNI7 KN, Cut for Knob InsideKNIR7 KN, Cut for Knob Inside - Rigid LeverKNO7 KN, Cut for Knob Outside$190 $220KNOR7 KN, Cut for Knob Outside - Rigid LeverKC7 KC, Cut for Cylinder Outside - Pro C1KCT7 KC, Cut for Cylinder Inside - Pro C1210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$550 $625 $405 $460450 525 305 360PAT7PatioKensington, Bristol, RichlandTier 2Item # DescriptionEntrance Mortise Cylinder European MortiseACT7 Entry - Keyed W/ TurnknobPassage European MortiseFDP7 Passage - Active No Cylinder Or TurnknobFull Inactive European MortiseFD7 Inactive - Non-keyedPatio European MortisePAT7 Patio - Non-keyedEscutcheons ONLYKNI7 KN, Cut for Knob InsideKNIR7 KN, Cut for Knob Inside - Rigid LeverKNO7 KN, Cut for Knob OutsideKNOR7 KN, Cut for Knob Outside - Rigid LeverKC7 KC, Cut for Cylinder Outside - Pro C1KCT7 KC, Cut for Cylinder Inside - Pro C1030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$600 $675 $455 $510500 575 355 410$210 $240230 260

EUROPEAN MORTISEHOW TO ORDER, CONFIGUR ATION 7STEP 3 (CONT)Thick Door KitsTier 1 & Tier 2THICK DOOR KIT — CONFIGURATION #7EXAMPLE #MP000 . xxx . ACTDIncludedw/standard setsACT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝ List PriceAll others MP000.xxx.ACTD MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTG $120Bismark, Kensington, Lakeshore MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTI $120PAT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝All others MP000.xxx.PATJ MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATM $120Bismark, Kensington, Lakeshore MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATO $120FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25> Baldwin European Mortise trims assume 1.75˝ door thickness.> For thicker doors, please order a Thick Door kit according to the chart below.Specify cylinder finish where noted.> Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze).> See finish chart on page 156 for cylinder finish recommendations.ACT kits include:PAT kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle165Stainless Steel levers are not compatible with Multi-Point.

EUROPEAN MORTISEHOW TO ORDER, CONFIGUR ATION 8STEP 1STEP 2PICK YOUR MORTISE TRIMCHOOSE YOUR DOOR CONFIGURATIONEXAMPLE #MP004 . xxx . xxxxEXAMPLE #MP004 . xxx . xxx8Configuration # DescriptionConfiguration 8 European Mortise Cylinder — 85mm center to center215.9 mm center to center mounting hole locationSTEP 3CHOOSE YOUR FUNCTION — CONFIGURATION #8EXAMPLE #MP004 . xxx . ACT8ACT8Entrance Mortise CylinderFDP8PassageFD8Full InactiveBismark, Boulder, Cody, Concord, Lakeshore, SpringfieldTier 1030, 031033, 034, 040050, 060, 102 003, 055112, 150, 151 056, 402Item # Description190, 260, 264 412, 452Entrance Mortise Cylinder European MortiseACT8 Entry - Keyed W/ TurnknobPassage European MortiseFDP8 Passage - Active No Cylinder Or TurnknobFull Inactive European MortiseFD8 Inactive - Non-keyedPatio European MortisePAT8 Patio - Non-keyedEscutcheons ONLYKNI8 KN, Cut for Knob InsideKNIR8 KN, Cut for Knob Inside - Rigid LeverKNO8 KN, Cut for Knob Outside$190 220KNOR8 KN, Cut for Knob Outside - Rigid LeverKC8 KC, Cut for Cylinder Outside - Pro C1KCT8 KC, Cut for Cylinder Inside - Pro C1210 240Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$550 $625 $405 $460450 525 305 360PAT8PatioKensington, Bristol, RichlandTier 2Item # DescriptionEntrance Mortise Cylinder European MortiseACT8 Entry - Keyed W/ TurnknobPassage European MortiseFDP8 Passage - Active No Cylinder Or TurnknobFull Inactive European MortiseFD8 Inactive - Non-keyedPatio European MortisePAT8 Patio - Non-keyedEscutcheons ONLYKNI8 KN, Cut for Knob InsideKNIR8 KN, Cut for Knob Inside - Rigid LeverKNO8 KN, Cut for Knob OutsideKNOR8 KN, Cut for Knob Outside - Rigid LeverKC8 KC, Cut for Cylinder Outside - Pro C1KCT8 KC, Cut for Cylinder Inside - Pro C1030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452Without Levers030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003, 055056, 402412, 452$600 $675 $455 $510500 575 355 410$210 240230 260

EUROPEAN MORTISEHOW TO ORDER, CONFIGUR ATION 8STEP 3 (CONT)Thick Door KitsTier 1 & Tier 2THICK DOOR KIT — CONFIGURATION #8EXAMPLE #MP000 . xxx . ACTDIncludedw/standard setsACT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝ List PriceAll others MP000.xxx.ACTD MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTG $120Bismark, Kensington, Lakeshore MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTI $120PAT1 1 ¾˝ 2˝ 2 ¼˝ 2 3 ⁄8˝ 2 ½˝ 2 ¾˝All others MP000.xxx.PATJ MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATM $120Bismark, Kensington, Lakeshore MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATO $120FD Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25FDP Sets 1 ¾˝ to 2 ¼˝ 2 3 ⁄8˝ to 2 ¾˝MP000.000.FDPTP — — MP000.000.FDPTQ — — $25> Baldwin European Mortise trims assume 1.75˝ door thickness.> For thicker doors, please order a Thick Door kit according to the chart below.Specify cylinder finish where noted.> Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze).> See finish chart on page 156 for cylinder finish recommendations.ACT kits include:PAT kits include:FDPTP kits include:8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation Hardware8mm to 7.3mm Conversion Spindle167Stainless Steel levers are not compatible with Multi-Point.

RIM LOCKSSTANDARDS & SPECIFICATIONSStandards & SpecificationsRim Lock MechanismPride in our American Heritage and renewed interest in its early history has greatlyinfluenced U.S. architecture. With careful research and design, Baldwin hasauthentically reproduced a piece of that heritage – colonial rim locks.> Constructed with solid forged brass parts for exceptional durability andsmooth operation> Trim designs secured to a broached spindle with an epoxy (resin) coated setscrew – prohibits screw from loosening> Interior rim locks use bit keys. Bit keys may be ordered fixed permanently intothe lock by ordering as .RBIT or .LBIT configurations.> Rim locks are sold as sets, split finish requests are subject to 5% list priceadder.Handing of Rim Lock PlatesLEFT HAND CONDITION(SINGLE DOOR)RIGHT HAND CONDITION(SINGLE DOOR)NOTE: Hand of door is always determined from outsideIMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors

RIM LOCKSPASSAGE, PRIVACY & ENTR ANCERim LocksExterior TrimFull Dummy Rim Locks Passage Rim Locks Privacy Rim Locks Entrance Rim LocksHollow rim lock case(without any working mechanism)Latch bolt by knob either side Latch bolt by knob either sideDead bolt by Bit Key either sideLatch bolt by knob either sideDead bolt by key outsideand slide bolt insideIncluded Item # Included Item # Included Item # Included Item #Knob (Pair) 5030 Bit Key* 5755 Bit Key* 5755 Cylinder 8333Rose (Half Pair) 5002 Knob (Pair) 5030 Cover Plate 0406 Cylinder Cover Plate 6755Rose (Half Pair) 5002 Emergency Key 5753 Cylinder Cover Plate* 6757Knob (Pair) 5030 Knob (Pair) 5030Full Dummy preparedas a strike for allfunction rim locksExterior TrimIncluded Item #Cylinder (Entrance Only) 6755Knob 5030Rose 5002Rose (Half Pair) 5002 Rose (Half Pair) 5002* Only in case of 5704> RIM LOCKS ARE NOT REVERSIBLE – SPECIFY HAND OF DOORS> IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reversebevel doors> *Bit Key can be permanently fitted at an extra charge of $10 (add ‘BIT’ to endof suffix: eg. 5600.xxx.R becomes 5600.xxx.RBIT)> Emergency key – s/b stored in readily accessible place> For 2 1/4 inch thick doors, 5 inch spindle requiredSmall Verical Rim Lock5600, 5602, 5604Inside TrimItem # Description Function Wt. Backset030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 2640030550565600.xxx.R (.L, .RR, .LR) Small Vertical Passage 3.7 2.75˝ $700 $7405600.xxx.RFD (.LFD) Small Vertical Full Dummy 3.7 2.75˝ 350 3905602.xxx.R (.L, .RR, .LR) Small Vertical Privacy 4.0 2.75˝ 825 8655602.xxx.RFD (.LFD) Small Vertical Full Dummy 3.7 2.75˝ 425 4655604.xxx.R (.L, .RR, .LR)* Small Vertical Entrance 4.6 2.75˝ 900 9405604.xxx.RFD (.LFD)* Small Vertical Full Dummy 4.6 2.75˝ 450 490Right Hand ShownCASE: 4.75˝ × 3.75˝ × .875˝KEEPER: 4.75˝ × .875˝ × 1.625˝BACKSET: 2.75˝Upright design well suited for narrow stile doors*5604.xxx – Fixed Bit key NOT available.7˝ Horizontal Rim Lock5630, 5632, 5634Inside TrimItem # Description Function Wt. Backset030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 2640030550565630.xxx.R (.L, .RR, .LR) 7˝ Horizontal Passage 4.4 5.25˝ $775 $8155630.xxx.RFD (.LFD) 7˝ Horizontal Full Dummy 4.4 5.25˝ 375 4155632.xxx.R (.L, .RR, .LR) 7˝ Horizontal Privacy 4.8 5.25˝ 850 8905634.xxx.R (.L, .RR, .LR) 7˝ Horizontal Entrance 5.5 5.25˝ 950 9905634.xxx.RFD (.LFD) 7˝ Horizontal Full Dummy 5.5 5.25˝ 475 515CASE: 4˝ × 6.75˝ × .875˝KEEPER: 4˝ × .875˝ × 1.625˝BACKSET: 5.25˝Right Hand ShownSmall Horizontal Rim Lock5701, 5702, 5704Inside TrimItem # Description Function Wt. Backset030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 2640030550565701.xxx.R (.L, .RR, .LR) Small Horizontal Passage 3.8 3.5˝ $700 $7405701.xxx.RFD (.LFD) Small Horizontal Full Dummy 3.8 3.5˝ 350 3905702.xxx.R (.L, .RR, .LR) Small Horizontal Privacy 4.2 3.5˝ 825 8655702.xxx.RFD (.LFD) Small Horizontal Full Dummy 3.7 3.5˝ 425 4655704.xxx.R (.L, .RR, .LR) Small Horizontal Entrance 4.6 3.5˝ 900 9405704.xxx.RFD (.LFD) Small Horizontal Full Dummy 4.6 3.5˝ 450 490Left Hand ShownCASE: 3.75˝ × 4.75˝ × .875˝KEEPER: 3.75˝ × .875˝ × 1.625˝BACKSET: 3.5˝TO BIT KEY: 2.375˝169

RIM LOCKSENTR ANCE, SPECIAL FUNCTIONBeveled Rim Lock5636Interior Trim5636.xxx Included SizeExterior Trim — Case: 5˝ × 7.25˝ × .875˝Interior Trim — Keeper: 5˝ × 1.375˝ × 1.625˝Bit Key* 5755 Backset: 5.25˝Cylinder 8333 To Bit Key: 4˝Cylinder Cover Plate 6755 Front to cylinder centerline: 3˝Knob/Lever5030 (Pair)Filler Plate — Latch bolt by knob either sideLock Plate —Rose 5002(Half Pair)Dead bolt by key outside and slidebolt inside or bit keyItem # Description Function Wt. Backset030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 2640030550565636.xxx.R (.L, .RR, .LR) Bevelled Rim Lock Entrance 7.2 5.25˝ $1,250 $1,2905636.xxx.RFD (.LFD) Bevelled Rim Lock Entrance 7.2 5.25˝ 625 6655639.xxx.R (.L, .RR, .LR)Hollow MetalDoors Rim LockEntrance 7.2 5.25˝ 1,250 1,2905639.xxx.RFD (.LFD)Hollow MetalDoors Rim LockEntrance 7.2 5.25˝ 625 6655644.xxx.R (.L, .RR, .LR)HorizontalCylinder LockEntrance 7.9 8˝ 1,250 1,2905644.xxx.RFD (.LFD)HorizontalCylinder LockEntrance 7.9 8˝ 625 6655720.xxx.R (.L, .RR, .LR)Entrance DoorRim LockEntrance 7.8 3.5˝ 1,250 1,2905720.xxx.RFD (.LFD)Entrance DoorRim LockEntrance 7.8 3.5˝ 625 6655722.xxxEntrance DoorRim LockOutside only x 3.5˝ 360 3805723.xxx.R (.L)Entrance DoorRim LockInside only x 3.5˝ 950 970> RIM LOCKS ARE NOT REVERSIBLE – SPECIFY HAND OF DOORS> IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors> *Bit Key can be permanently fitted at an extra charge of $10 (add ‘BIT’ toend of suffix: eg. 5600.xxx.R becomes 5600.xxx.RBIT)> For 2 ¼ inch thick doors, 5 inch spindle required5639Interior Trim5639.xxx Included SizeExterior Trim — Case: 4˝ × 6.75˝ × .875˝Interior Trim — Keeper: 4˝ × .875˝ × 1.625˝Bit Key* 5755 Lock Plate 4˝ × 6.25˝Cylinder 8333 Backset: 5.25˝Cylinder Cover Plate 6755 To Bit Key: 4˝Knob/Lever 5030 (Pair) Front to cylinder centerline: 3˝Filler Plate 0579 NOTE: For 1.75˝ thick doors only.Lock Plate 5629Specially fabricated lock plate formetal clad doorsRose N/A Latch bolt by knob either sideDead bolt by key outside and slidebolt inside or bit keyExterior Trim57205644Interior Trim5644.xxx Included SizeExterior Trim — Case: 5.75˝ × 10˝ × .875˝Interior Trim — Keeper: 5.75˝ × .875˝ × 1.625˝Bit Key* 5755 Backset: 8˝Cylinder 8333 To Bit Key: 6˝Cylinder Cover Plate 6755 Front to cylinder centerline: 5˝Knob/Lever5030 (Pair)Filler Plate — Latch bolt by knob either sideLock Plate —Rose 5002(Half Pair)Dead bolt by key outside and slidebolt inside or bit key5720.xxx Included SizeExterior Trim 5722 Case: 3.75˝ × 4.75˝ × .875˝Interior Trim 5723 Keeper: 3.75˝ × .875˝ × 1.625˝Bit Key* — Lock Plate 4˝ × 6.25˝Cylinder 8333 Backset: 3.5˝Cylinder Cover Plate — Front to cylinder centerline:Knob/Lever5030 (Pair)2.75˝Filler Plate — NOTE: For 1.75˝ - 2˝ thick doors onlyLock Plate — Latch bolt by knob either sideRose — Dead bolt by key outside and slidebolt inside or bit keyUnusual combination of classic colonial “Pitcher Handle” sectional trim outsidewith Early American rim lock inside. Thumb piece operates latch and can belocked by turning cylinder key from outside or sliding dead bolt from inside.

RIM LOCKSTRIMTrim PiecesRim Lock Keeper(Strikes)Reverse Bevel Keepers(Strikes)Item # Description Size Fits Rim Lock5601.xxx Keeper (Standard Strike) 4.75˝ x 0.875˝ x 1.625˝ 5600, 5602, 56045631.xxx Keeper (Standard Strike) 4˝ x 0.875˝ x 1.625˝ 5630, 5632, 5634, 56395641.xxx Keeper (Standard Strike) 5.75˝ x 0.875˝ x 1.625˝ 56445671.xxx Keeper (Standard Strike) 3.75˝ x 0.875˝ x 1.625˝ 5701, 5702, 5704, 57205603.xxx Reverse Bevel Keeper (Strike) 4.75˝ × 1˝ × .375˝ 5600, 5602, 56045628.xxx Reverse Bevel Keeper (Strike) 4˝ × 1˝ × .375˝ 5630, 5632, 5634, 56395642.xxx Reverse Bevel Keeper (Strike) 5.75˝ × 1˝ × .375˝ 56445672.xxx Reverse Bevel Keeper (Strike) 3.75˝ × 1˝ × .375˝ 5701, 5702, 5704, 57205606.xxx Scuff Plate 4.75˝ × 1.875˝ 5600, 5602, 56045633.xxx Scuff Plate 4˝ × 1.875˝ 5630, 5632, 5634, 56395643.xxx Scuff Plate 5.75˝ × 1.875˝ 56445673.xxx Scuff Plate 3.75˝ × 1.875˝ 5701, 5702, 5704, 5720Scuff Plates> Recommended on reverse bevel doors.> Prevents damage to doors and latch bolts.> Provides smoother lock operation.030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$75 $8560 7060 70Scuff PlatesExterior only Lock PlateItem #Description5608.xxx.RSKC (.LSKC)* Exterior Lock Plate5626.xxx.RSKC (.LSKC)** Exterior Lock PlateDoorHandlingDoorPlatePrepSizeFits RimLock4.75˝ × 3.25˝ 56045634, 5636R or L Single KC 4˝ × 6.25˝5629.xxx.RSKC (.LSKC) Exterior Lock Plate 56395674.xxx.RSKC (.LSKC)* Exterior Lock Plate 3.75˝ × 4.25˝ 5704*Does not include and cannot accommodate 6755 Swing Cover**Beveled trim for 5626 lock plate is not available.5626 & 5629 Plates: 6755 Cylinder Cover Plate is secured to plateNote: Rose and Cylinder trim furnished with cylinder function rim locks not used w/ Lock PlateTHICKNESS: .093˝030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056$140 $155Knob trim NOT includedIncluded with Cylinder-function Rim Lock171

RIM LOCKSACCESSORIESAccessoriesItem #Description030, 031033, 034, 040050, 060, 102112, 150, 151190, 260, 264003055056040657530406.xxx Colonial Emergency Release Trim & Key $40 $455753.xxx Emergency Release Key 35 405754.xxx Key Plate 15 205755.xxx Bit Key 35 405758.xxx Solid Brass Spacer 10 156755.xxx Cylinder Lock Cover Plate 95 1006755.xxx.001 ¹⁄16˝ Blocking Ring – 6755 only6755.xxx.002 ³⁄32˝ Blocking Ring – 6755 only(040 finish only) 106755.xxx.003 ¹⁄8˝ Blocking Ring – 6755 only8314.xxx Wrought Cylinder Collar for Rim Locks 15 200406.xxx – Colonial Emergency Release Trim & KeySIZE: 2.312˝ × .687˝ (59 × 17mm).5753.xxx – Emergency Release KeySIZE: 4˝ (102mm) long.Designed for use with Privacy Rim and Mortise Lock57545754.xxx – Key PlateSIZE: 2˝ × 1.125˝ (51 × 29mm).Key Plate5755.xxx Bit KeySIZE: 4˝ (102mm) long.FEATURES: Fits all Baldwin rim locks. Can be permanentlyfitted with locks to prevent unauthorized removal.5758.xxx – Solid Brass SpacerDesigned for use with knob trim during installation on rim lockcase. Furnished standard with all rim lock sets.6755.xxx – Cylinder Cover PlateSIZE: 2.375˝ × 1.625˝ (60 × 41mm)FEATURES: For use with all standard rim lock cylinders (except 5704 Rim Lock)57556755.xxx.001-3 – Blocking RingsFor 6755 Cylinder Cover Plate only575867558314

KEYLESS ENTRYHow To OrderDeadboltSectional HandlesetDEADBOLTTo Order Only a Deadbolt, SimplyOrder & Specify the Finish:SECTIONAL HANDSETTo Order Sectional Handleset,Order Both Deadbolt & SectionalHandleset Kit* (with Handing)& Specify the Finish:EXAMPLE:8285.150.AC1EXAMPLE:8285.150.AC1 +85386.150.ACRH> Keyless Entry Systems are only available in Soho & Boulder Styles.Finishes Available for Soho Keyless EntryFinishes8285.xxx.AC1Soho Deadbolt150SatinNickel260PolishedChrome264SatinChrome056Lifetime (PVD)Satin NickelTIER 1 TIER 285386.xxx.ACRH (.ACLH)Soho Sectional Trim w/ 5485V LeverFinishes Available for Boulder Keyless EntryFinishes8252.xxx.AC1Boulder Deadbolt102Oil RubbedBronze112VenetianBronze003Lifetime (PVD)Polished Brass402DistressedOil Rubbed Bronze85353.xxx.ACRH (.ACLH)Boulder Sectional Trim w/ 5452V Beavertail LeverTIER 1 TIER 2173

KEYLESS ENTRYKeyless Entry Features & SpecificationsFEATURES• Easy Install in Minutes w/ Screwdriver• Fits Standard Tubular Door Prep• No Hard Wiring Required• 2 Customizable User Codes with Easy Add & Delete• 4 to 8 Digit Codes• One Touch Locking• Back-Lit Keypad for Increased Visibility• Incorrect Code Lockout Feature• Customizable Features:- Automatic Door Locking after 30 Seconds- Door Locked / Unlocked led indicator- Audible beep for activation• 4 AA Batteries• Low Battery LED Indicator• Tapered Deadbolt Design - Compensatesfor Door Misalignment Conditions• Protective Coated Keypad PreventingWear & Discoloration• Automatic Handing Feature• Solid Forged Brass TrimSPECIFICATIONSFunction Single Cylinder DeadboltDoor Prep 2 1 ⁄8" Bore, 1" Edge BoreBackset Adjustable 2 3 ⁄8" or 2 3 ⁄4"Door Thickness 1.75" to 2.00"Cylinder 5-Pin C-KeywayFaceplate 1" Square CornerStrike Square Corner with reinforcing plateLatch 1" ThrowBolt Brass, tapered w/ security pinDoor Handing Automatic HandingFAQ ListKeyless EntryDoes this product require a different installation?What is the estimated life of the batteries?Is this product offered in an emergency egress function?What cylinders are provided?What latches are provided with this product?Are there issues with the motorized bolt in regards toweather-stripping or warped door conditions?Can I get additional finishes or split finishes?What is the standard lead time for these products?Are Keyed Alike sets offered?What is the Warranty?Are batteries included?No, fits a standard tubular deadbolt prep.Approximately 1 year of standard use.No, this product is not offered in an Emergency Egress function.Uses a standard deadbolt cylinder with an extended tail piece.The Keyless Entry Deadbolt products use a modifi ed standardDeadbolt Latch that includes a tapered bolt & a modifi ed latch cam.The tapered deadbolt was designed to address these conditions.No, these products cannot be extended into additionalfinishes or split finishes at this time.There will be an extended lead time period for the productlaunch, but after that the Keyless Entry products willmaintain a standard product lead time of 3 weeks.No, not at this time. Product will need to be re-keyed in the fi eld.The Keyless Entry Deadbolts carry a Standard Estate Mechanical& Finish Warranty & a 1 Year Electronic Warranty.No, AA batteries are not included & willneed to be purchased separately.

KEYLESS ENTRYSoho DeadboltTier 1 Tier 2Item #Description150, 260, 264 0568285.xxx.AC1 Deadbolt $465 $495SOHO Sectional Handleset KitTier 1 Tier 2Item #Description150, 260, 264 05685386.xxx.ACRH (.ACLH) Sectional Entry Handleset Kit $335 $3500.52.84.6.52.811.98.02.92.12.51.82.05.75Boulder DeadboltTier 1 Tier 2Item #Description102, 112 003, 4028252.xxx.AC1 Deadbolt $465 $495Boulder Sectional Handleset KitTier 1 Tier 2Item #Description102, 112 003, 40285353.xxx.ACRH (.ACLH) Sectional Entry Handleset Kit $335 $3502.8175

DEADBOLT SETS, MECHANICAL FEATURES8000 SERIESLOW PROFILE CYLINDER DEADBOLT FOR 1 5 ⁄8˝ (41mm) DOOR PREPAll deadbolts feature a ½˝ low-profile cylinder projection.CASE: Deadbolt case is formed of heavy gauge steel for strength and assures solidfit in door preparations. Most interior working parts are made of solid brass formaximum strength and smooth operation.DEADBOLT: All deadbolts are of solid brass construction. Deadbolt has .600˝ x.770˝ x 1˝ (15 x 20 x 25mm) throw when extended and a hardened steel insert formaximum protection and security. Deadbolt is furnished in 040 and 264 finishesto match trim.GRADE 1: Meets Grade 1 Requirements as set forth in ANSI A156.5 Test Sections9.1–9.11 & 10.1–10.9.BACKSET: Adjustable backset deadbolt 2 3 ⁄8˝ (60mm) or 2 ¾˝ (70mm).NON-HANDED design facilitates specification and installation.STRIKE: Every deadbolt illustrated in this section is furnished with a speciallydesignedreinforcing strike constructed of high grade steel for ultimate strengthand durability. The strike is installed with four (4) security jamb screws (includingtwo (2) 3˝ screws) and a dust box and is covered with an armored front to concealthe fasteners. The 3˝ screws securing the reinforcing strike resist tampering andguard against theft.CYLINDERS: The cylinder housing is protected with a free-turning exteriorcylinder guard fabricated from solid brass to resist gripping or twisting. Cylindersare supplied standard with 03 keyway and two nickel silver keys. All deadbolts arefurnished with 5-pin keying.KEYING: Keep in mind that the total quantity of deadbolts ordered must be amultiple of the keyed alike quantity. Contact factory for keying to a specific keynumber. KEYS are designed with a 1.25˝ (32mm) wide bow surface.PACKAGING: Packaged one deadbolt per box with security strike, dust box and keys.All products are packaged in contractor packaging.WEIGHT: 1.8 lbs. each (.81kg); 10.8 lbs. (4.86kg) per case for standard package.DOOR CONDITIONS: Deadbolts fit 1 5 ⁄8˝ (41mm) diameter cutouts. Trim ringsNo. 8090 available for doors drilled with 2-1/8˝ (54mm) diameter holes.DOOR THICKNESS: Deadbolts fit 1 ¾˝ (44mm) thick doors. Deadbolt kits areavailable for 2˝ (51mm) and 2 ¼˝ (57mm) thick doors at an additional charge. Doorspacers No. 8097 are required for 1 3 ⁄8˝ (35mm) thick doors (available for the 8041,8011, 8031 & 8021 deadbolts only).8200 SERIESLOW PROFILE CYLINDER DEADBOLT FOR 2 1 ⁄8˝ (54mm) DOOR PREPAll information identical to 8000 SERIES except where noted hereWEIGHT: 2.2 lbs. each (.99kg); 13.2 lbs. per case (5.94kg).DOOR CONDITIONS: Deadbolts fit 2 1 ⁄8˝ (54mm) diameter cutouts.DOOR THICKNESS: Deadbolts fit 1 ¾˝ (44mm) thick doors. Deadbolt kits areavailable for 2˝ (51mm) and 2 ¼˝ (57mm) thick doors at an additional charge.Door spacers No. 8297 are required for 1 3 ⁄8˝ (35mm) thick doors (8241, 8242,8231, 8232 only).UL Deadbolts KitUL certified tubular products can be ordered by adding a UL kit to ourstandard deadbolt or select Estate passage or privacy sets. Our UL productsare rated a 3hr fire rating when used on fire rated doors.UL DEADBOLTS KITItem #U8201.xxx.DBU8202.xxx.DBU8208.xxx.DBU8209.xxx.DBDescriptionUL Kit for single cylinder deadbolt - 2 1/8” door prepUL Kit for double cylinder deadbolt - 2 1/8” door prepUL Kit for single cylinder deadbolt - 1 5/8” door prepUL Kit for double cylinder deadbolt - 1 5/8” door prep031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264For 402, 412, or 452 finishes, please substitute with a 102, 112, or 152 finish respectively.INCLUDED:Deadbolt latch with UL faceplate, UL Shield and rotation stop003055056$30 $35ORDERING INSTRUCTIONS:1. Choose your deadbolt: eg. 8231.003 - Traditional Deadbolt, single cylinder, 2 1 ⁄8” door prep2. Choose the appropriate deadbolt kit: U8201.003.DB – UL kit for single cylinder, 2 1 ⁄8” door prepOther examples:8041.260 – Contemporary deadbolt, single cylinder, 1 5 ⁄8” door prepU8208.260.DB – UL kit for single cylinder, 1 5 ⁄8” door prep8238.112 – Bethpage deadbolt, double cylinder, 2 1 ⁄8” door prepU8202.112.DB – UL kit for double cylinder, 2 1 ⁄8” door prepNOTE: All components from the deadbolt kit must be installed for UL certification.8244 Contemporary Deadbolt – 2 ¹⁄8˝ Door Prep8244 & 8244SItem # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528244.xxx Single cylinder deadbolt 2.0 $130 $1458244.xxx.PAT Patio deadbolt 1.2 110 125320, 3248244S.xxx Single cylinder deadbolt (stainless steel) 1.9 130 —8244S.xxx.PAT Patio deadbolt (stainless steel) 1.1 110 —NOTE: Not Available as a double cylinder. Also Not Available for 1 3 ⁄8” thick doors.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)

DEADBOLTS8011, 8041 Contemporary Deadbolt – 1 5 ⁄8˝ Door Prep8041Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528041.xxx Single cylinder deadbolt 1.7 $95 $1108011.xxx Double cylinder deadbolt 1.9 110 125STEEL CASE: .960˝ Dia. x 3.312˝ or 3.75˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm).5801128241, 8242 Contemporary Deadbolt – 2 1 ⁄8˝ Door Prep8241Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528241.xxx Single cylinder deadbolt 2.1 $95 $1108242.xxx Double cylinder deadbolt 2.4 110 1258241.xxx.PAT Patio deadbolt 1.1 70 80STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)8242Patio Deadbolt: NOT 2 1 ⁄8˝ Door Prep8241.xxx.PAT8021, 8031 Traditional Deadbolt – 1 5 ⁄8˝ Door Prep8031Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528031.xxx Single cylinder deadbolt 1.8 $95 $1108021.xxx Double cylinder deadbolt 2.0 110 125STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)8021.72.0177

DEADBOLTS8231, 8232 Traditional Deadbolt – 2 1 ⁄8˝ Door Prep8231Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528231.xxx Single cylinder deadbolt 2.2 $95 $1108232.xxx Double cylinder deadbolt 2.4 110 1258231.xxx.PAT Patio deadbolt 1.1 70 80STEEL CASE: .960˝ Dia. x 3.312˝ or 3.75˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)8232Patio Deadbolt: NOT 2 1 ⁄8˝ Door Prep8231.xxx.PAT8212, 8213 Tahoe Deadbolt – 2 1 ⁄8˝ or 1 5 ⁄8˝ Door Prep8213Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528213.xxx Single cylinder deadbolt 2.4 $110 $1258212.xxx Double cylinder deadbolt 2.5 125 140NOT AVAILABLE FOR 1 3 ⁄8” THICK DOORS.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)3".56"82123.68"8237, 8238 Bethpage Deadbolt – 2 1 ⁄8˝ Door Prep8237Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528237.xxx Single cylinder deadbolt 2.1 $110 $1258238.xxx Double cylinder deadbolt 2.4 125 140NOT AVAILABLE FOR 1 3 ⁄8” THICK DOORS.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.63˝W X 3.25˝H X 0.5˝ THICK (66 X 81 X 13mm)82382.58˝(65.0mm)0.60˝(15.0mm)1.32˝(34.0mm)2.58˝(65.0mm)3.27˝(83.0mm)3.27˝(83.0mm)

DEADBOLTS8285, 8286 Soho Deadbolt – 2 1 ⁄8˝ Door Prep8285Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528285.xxx Single cylinder deadbolt 2.2 $110 $1258286.xxx Double cylinder deadbolt 2.4 125 140NOT AVAILABLE FOR 1 3 ⁄8” THICK DOORS.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.75˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.75˝W X 2.88˝H X 0.5˝ THICK (70 X 73 X 13mm)82862.8.52.98252, 8253 Arched Deadbolt – 2 1 ⁄8˝ Door Prep8252Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528252.xxx Single cylinder deadbolt 2.0 $110 $1258253.xxx Double cylinder deadbolt 2.0 125 140NOT AVAILABLE FOR 1 3 ⁄8” THICK DOORS.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.75˝W X 3.62˝H X 0.5˝ THICK (70 X 92 X 13mm)2.75.5682533.628254, 8255 Squared Deadbolt – 2 1 ⁄8˝ Door Prep8254Item # Description Wt.031, 033034, 040, 050060, 102, 112150, 151, 190,260, 264003, 055056, 402412, 4528254.xxx Single cylinder deadbolt 2.0 $110 $1258255.xxx Double cylinder deadbolt 2.0 125 140NOT AVAILABLE FOR 1 3 ⁄8” THICK DOORS.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.73˝W X 3.62˝H X 0.5˝ THICK (70 X 92 X 13mm)82552.75.562.75179

TUBULARDEADBOLTS, EXPLODED VIEWSDouble Cylinder Deadbolt65314714101. 1 each Adjustable Backset Deadbolt2. 4 each #8.75˝ Flathead Combination Screws3. 1 each Outside Cylinder4. 1 each Outside Cylinder Collar5. 2 each Keys6. 1 each Outside Cylinder Tail Piece7. 1 each Screw Guide8. 1 each Inside Cylinder9. 1 each Inside Cylinder Tail Piece10. 1 each Threaded Collar11. 2 each #10-32 x 2.25˝ Flat Head Machine Screws12. 1 each Cylinder Cover13. 1 each Inside Collar14. Optional 8090 Trim Rings48111211329Single Cylinder Deadbolt5361371381. 1 each Adjustable Backset Deadbolt2. 2 each #8-32 x ¾˝ Flat Head Machine Screws3. 1 each Outside Cylinder4. 1 each Outside Cylinder Collar5. 2 each Keys6. 1 each Cylinder Tail Piece7. 1 each Screw Guide8. 1 each Turn Knob Mounting Plate9. 2 each #10-32 x 2 ¼˝ Flat Head Machine Screws10. 1 each Turn Knob Tail Piece11. 1 each Turn Knob Trim12. 2 each #8-32 Oval Head Machine Screws13. Optional 8090 Trim Rings4101111229Cylinder Exploded ViewCYLINDER CAP TOOLGEDCBAA. Cylinder Plug CapB. WasherC. Tail PieceD. Retaining PinE. SpringF. Cylinder PlugG. Tumbler SpringsNo. 8052.289.00045WASHERCYLINDERCAPRETAININGPINF

TUBULARHANDLESET ACCESSORIES5398 – Thick Door Kits for Old MechanicsItem #DescriptionStd.BoxWt.030, 050, 102112, 150, 151190, 260, 2644024214525398.xxx.A*5398.xxx.B*5398.xxx.C5398.xxx.D5398.xxx.G5398.xxx.HFor Sectional & Escutcheon Entrance (ENTR) functionhandlesets with Knobs to fit 2˝ & 2 ¼˝ thick doorsFor Sectional & Escutcheon Double Cylinder (DBLC) functionhandlesets with Knobs to fit 2˝ & 2 ¼˝ thick doorsFor all Emergency Egress handlesets (ENTR,RENT, LENT) to fit 2˝ & 2 ¼˝ thick doorsFor Sectional, Escutcheon and Emergency Egress Dummy(FD, LRFD) handlesets to fit 2˝ & 2 ¼˝ thick doorsFor Sectional and Escutcheon Entrance (RENT, LENT) functionhandlesets with Levers to fit 2˝ & 2 ¼˝ thick doorsFor Sectional and Escutcheon Double Cylinder (RDBL, LDBL)function handlesets with Levers to fit 2˝ & 2 ¼˝ thick doors11.3.4 $45 —1 .41 .1 15 —1 .345 —1 .45399 – Thick Door Kits for New MechanicsItem #DescriptionStd.BoxWt.030, 050, 102112, 150, 151190, 260, 2644024214525399.xxx.A5399.xxx.B5399.xxx.C5399.xxx.DFor all Sectional and Escutcheon Single Cylinder Entrancefunction handlesets to fit 2˝ & 2 ¼˝ thick doorFor all Sectional and Escutcheon Double CylinderEntrance handlesets to fit 2˝ & 2 ¼˝ thick doorsFor all Emergency Egress function handlesetsto fit 2˝ & 2 ¼˝ thick doorsFor all Full Dummy handle functions — Sectional, Escutcheonand Emergency Egress to fit 2˝ & 2 ¼˝ thick doors11.3.4 $45 —1 .31 .1 15 —Features: Each conversion kit includes tailpieces (if necessary), thru-bolts, strike plate, and instructions formodifying sets for use on doors either 2˝ (51mm) or 2 ¼˝ (57mm) in thickness. (Must specify finish.)Weight: .21 lbs. (.09kg)5399 – Repair Kits for New MechanicsItem #DescriptionStd.BoxWt.030, 050, 102112, 150, 151190, 260, 2644024214525399.xxx.G*For active Sectional and Escutcheon handlesetswith Interior Knobs including Single Cylinder(ENTR) and Double Cylinder (DBLC) sets1 1.15399.xxx.H*5399.xxx.IFor active Sectional and Escutcheon handlesetswith Interior Levers including Single Cylinder(LHRH) and Double Cylinder (LRDB) setsFor active Tahoe Sectional handlesets withInterior Knobs including Single Cylinder (ENTR)and Double Cylinder (DBLC) sets1 1.31 1.2$45 $455399.xxx.JFor active Tahoe Sectional handlesets withInterior Levers including Single Cylinder (LHRH)and Double Cylinder (LRDB) sets1 1.25399.xxx.K*5399.xxx.LFor Full Dummy (FD or LRFD) Sectional, Escutcheon,and Emergency Egress handlesets with a Traditionaloval thumbpiece including Interior Knobs or LeversFor Full Dummy (FD or LRFD) Tahoe handlesets witha rectangular thumbpiece including Interior Knobs orLevers Use this kit for the following Trim Set: Tahoe1 .71 .635 355399.xxx.MFor active Emergency Egress handlesets (ENTR)with an oval egress cartridge, a Traditionaloval thumbpiece, and an Interior Knob1 2.05399.xxx.NFor active Emergency Egress handlesets (LENT or RENT)with a rectangular egress cartridge, a Traditionaloval thumbpiece, and an Interior Lever1 2.045 455399.xxx.OFor active Tahoe Emergency Egress handlesets (ENTR or LHRH)with an oval egress cartridge, a rectangularthumbpiece and an Interior Knob or Lever1 2.0NOTE: All parts must be installed for proper lock function.181*Use is excluded on Tahoe® hardware.

TUBULARENTR ANCE SET & DEADBOLT ACCESSORIESStrikes, Cylinders & Turnpiece ComponentsItem # Description U/M. Wt. 003050, 102112, 150, 151190, 260, 2644024124520550568000.xxx.RSTR Radius corner deadbolt strike each0.2 $10 $10 $10 — —OtherFinishes(As Marked)8000.xxx.STR Standard security deadbolt strike each8000.849.STR3 Dust box each 0.1 — — — — $5Item # Description U/M. Wt. 003050, 102112, 150, 151190, 260, 2644024124520550568011.xxx.0020 Inside cylinder each 0.1 $15 $15 — $15 —8011.039.0021 each 0.2 — — — — 7Cylinder threaded sleeve for mounting inside ofdouble cylinder deadboltOtherFinishes(As Marked)8011.109.0031 Tumbler springs100/pkg0.1 — — — — $208030.xxx.0003 Traditional outside cylinder collar each 2.0 35 30 30 35 060 = 308030.xxx.0005 Traditional inside cylinder collar each 2.0 35 30 30 35 060 = 308030.xxx.0510 Traditional turn knob assembly each 0.3 65 65 65 65 —8031.028.TP11 Turn piece tail piece, older style handleset each — — — — 28031.509.SH18 Pan head thru-bolt each 0.1 — — — — 28040.xxx.0004 Contemporary outside cylinder collar each 0.3 35 30 30 35 060 = 308040.xxx.0006 Contemporary inside cylinder collar each 0.2 35 30 30 35 —8040.xxx.0510 Contemporary turn knob assembly each 0.38237.xxx.0510 Bethpage turn knob each 0.465 65 65 65 —Cylinder tail piece for double cylinder deadbolt —8053.028.TP115up to 2 ¼˝ doorseachCylinder tail piece for single cylinder deadbolt —8053.028.TP425 each1 ¾˝ doors0.2 — — — — 3 NETCylinder tail piece for single cylinder deadbolt —8053.028.TP5251 7 ⁄8˝ to 2 ¼˝ doorseachCylinder tail piece for single cylinder deadbolt —8053.028.TP3251 ³⁄8˝ doorseach8053.028.TP215 Cylinder tail piece for egress each 0.1 — — — — 3 NETCylinder and tail piece for non-egress handleset and8031.xxx.KD12single cylinder deadboltseach 0.5 40 35 40 — —8031.xxx.KD22 Cylinder and tail piece for egress handlesets each 0.5 40 35 40 — —8011.xxx.KD12 Double cylinder for handlesets and deadbolts each 0.8 80 70 80 — —8052.289.00045 Cylinder cap tool each 0.1 — — — — 4 NET

TUBULARDEADBOLT ACCESSORIES8090, 8097, 8098, 8297 Trim Rings & CollarsItem # Description U/M. Wt. 003050, 102112, 150, 151190, 260, 264402412452055056OtherFinishes(As Marked)80908080.xxx Deadbolt Trim pair 1.5 $95 $85 — $958090.xxx Trim rings for 2 ¹⁄8˝ hole pair 0.2 15 15 15 158097.xxxCylinder collar spacer for 1 ³⁄8˝ thick doorsfor 80xx series deadbolts (1 5 ⁄8˝ prep)each 0.2 15 15 — 15Double cylinder Conversion kit8098.xxx.DC03 eachfor 2˝ & 2 ¼˝ thick doorsSingle Cylinder/Turn Piece Conversion8098.xxx.TP03eachkit for 2˝ & 2 ¼˝ thick doors0.1 — — — — 000 = $58297.xxxCylinder collar spacer for 1 ³⁄8˝ thick doorsfor 82xx series deadbolts (2 ¹⁄8˝ prep)each 0.3 20 20 — 208097Function8098.xxx.DC03 Double Cylinder8098.xxx.TP03 Cylinder / Turn PieceDoor Thickness2˝ (51mm) & 2.25˝ (57mm)8098.xxx.DC038090.xxx – Trim RingsDimensions: 2.5˝ Dia. (64mm)Features: Trim Rings are designed for use with installation of 8000 Series (1.625˝ {41mm} door prep) Deadboltsin 2.125˝ (54mm) diameter door preparation. One pair of rings is required for use in this application foreither Double Cylinder or Cylinder/Turn piece functions. Rings are finished to match Deadbolts.Weight: 2 lb. (.09kg)NOTE: 8090 Trim rings are not required for 8200 series deadbolts.8098.xxx.TP038097.xxx – Cylinder Collar Spacer For 8000 Series Deadbolts – For 1.375˝˝ (35mm) DoorDimensions: 2˝ Dia. (51mm)Features: For installation on 1.375˝ (35mm) doors. Always used under Cylinder Collar. Two Rings are required for Double Cylinder functions.One Ring is required for Cylinder/Turn piece functions. Finished to match deadbolt cylinder collar. Available at an extra charge.Weight: .2 lb. (.09kg)8098.xxx – Conversion Kits for 2˝ and 2.25˝ doorsPacked: One per box.82978297.xxx – Cylinder Collar Spacer For 8200 Series Deadbolts – For 1.375˝˝ (35mm) DoorDimensions: 2.5˝ Dia. (64mm)Features: For installation on 1.375˝ (35mm) doors. Always used under Cylinder Collar. Two Rings are required for Double Cylinder functions.One Ring is required for Cylinder/Turn piece functions. Finished to match deadbolt cylinder collar. Available at an extra charge.Weight: .3 lb. (.14kg)8201, 8208 DeadboltsItem # Description U/M. Wt. 003050, 102112, 150, 151190, 260, 2644024124520550568201 & 82088201.xxx.DB Adjustable deadbolt for double cylinder & patio each0.6 $40 $35 — $408208.xxx.DB Adjustable deadbolt for single cylinder eachAdjustable Backset Front Length Front Width Type of Lockset8201.xxx.DB8208.xxx.DB2.375˝ or 2.75˝ 2.25˝ (57mm) 1˝ (25mm)DoubleSingleFeatures: All Deadbolts are furnished with a 1˝ (25mm) throw. Each contains a saw-proof,hardened steel insert to prevent tampering. Fronts are adjustable for beveled door conditions.All deadbolts have an adjustable backset feature to accommodate 2.375˝ or 2.75˝ backsets.Packed: Without fasteners. Available in case quantities of twelve (12).Weight: .6 lb. (.27kg)183

GENERAL HARDWARELETTER BOX PLATES & SLEEVE0012 Letter Box Plate0012exteriorPerItem #DescriptionBox Wt.0012.xxx Letter Box Plate, 13˝ x 3.625˝ 1 2(lbs) $75 $89Package size – Spring tension design – Heavy gauge wrought brass13˝ x 3.625˝ (330 x 92mm), Inside opening: 11.562˝ x 2.812˝ (279 x 51mm)031, 033,034, 040, 050060, 102, 112140, 150, 151190, 260, 264003055056FEATURES: Very large opening will accommodate small packages.Bronze spring keeps flap tightly closed at all times and permits vertical installation.interior0014 Letter Box Plate0014Item #Description0014.xxx Letter Box Plate, 13˝ x 3.625˝ 1PerBoxWt.2.5(lbs)031, 033,034, 040, 050060, 102, 112140, 150, 151190, 260, 264003055056$125 $147exteriorPackage size – Spring tension design w/ covered hinging back plate – Heavy gauge wrought brass13˝ x 3.625˝ (330 x 92mm), Inside opening: 11.562˝ x 2.812˝ (279 x 51mm)FEATURES: In addition to the features of 0012, the hinging back plate provides additional privacy and decorativeappearance. Not suitable for vertical installation.interior0015 Letter Box Plate0015exteriorPerItem #DescriptionBox Wt.0015.xxx Letter Box Plate, 10˝ x 3˝ 1 1(lb) $95 $111Magazine size – Spring tension design – Heavy gauge wrought brass10˝ x 3˝ (254 x 92mm), Inside opening: 8.25˝ x 2.375˝ (191 x 51mm)031, 033,034, 040, 050060, 102, 112140, 150, 151190, 260, 264003055056FEATURES: Bronze spring keeps flap tightly closed at all times and permits vertical installation.interior0017 Letter Box Plate0017Item #Description0017.xxx Letter Box Plate, 10˝ x 3˝ 1PerBoxWt.1.5(lbs)031, 033,034, 040, 050060, 102, 112140, 150, 151190, 260, 264003055056$125 $147exteriorMagazine size – Spring tension design w/ covered hinging back plate – Heavy gauge wrought brass10˝ x 3˝ (254x 76mm), Inside opening: 7.5˝ x 2˝ (191 x 51mm)FEATURES: In addition to the features of 0015, the hinging back plate provides additional privacy and decorativeappearance. Not suitable for vertical installation.interior0050, 0052 Letterbox Sleeve0050, 0052Item #DescriptionPerBox Wt. 3240050.324 Letter Box Sleeve, fits 0015 & 0017 1 0.5 (lb) $320052.324 Letter Box Sleeve, fits 0012 & 0014 1 0.5 (lb) 360050.324: 8.0625 ˝ L x 2.25˝ W x 1.6875˝ D (205 x 57 x 43mm) - Fits our Letter Box Plates Nos. 0015 and 0017.0052.324: 11.375˝ L x 2.75˝ W x 1.6875˝ D (289 x 70 x 43mm) - Fits our Letter Box Plates Nos. 0012 and 0014.FEATURES:Made of stainless steel. Stocked for 1.75˝ (44mm) thick doors.PACKED: One (1) per box with sheet metal screws.

GENERAL HARDWAREDOOR KNOCKERS0102, 0103 Colonial Knocker0102, 0103Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4520102.xxx Colonial Knocker 1 1 $63 $740103.xxx Colonial Knocker w/ Observascope 1 1 81 96SIZE: 6.5˝ x 3.5˝ (165 x 89mm)CTC OF BOLTS: 4˝ (102mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0105 Tahoe Knocker0105030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0105.xxx Tahoe Knocker 1 1.9 $87 $103SIZE: 5.5˝ x 4.0˝ (140 x 102mm)CTC OF BOLTS: 4˝ (102mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0106 French Knocker0106030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0106.xxx French Knocker 1 1 $69 $81SIZE: 7.5˝ x 2.5˝ (190 x 64mm)CTC OF BOLTS: 5.7˝ (144mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0110 Victorian Knocker0110030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0110.xxx Victorian Knocker 1 1 $69 $92SIZE: 7˝ x 3.5˝ (178 x 89mm)CTC OF BOLTS: 6.437˝ (163mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0113 “S” Knocker0113Profile030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0113.xxx “S” Knocker 1 1.8 $138 $163SIZE: 2˝ dia. base (51mm), 7.8˝ ht. (197mm), 2.8˝ projection (70mm)CTC OF BOLTS: 4.75˝ (120mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors185

GENERAL HARDWAREDOOR KNOCKERS | BELL BUTTONS0116 Imperial Knocker0116030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0116.xxx Imperial Knocker 1 1.2 $79 $92SIZE: 8.5˝ x 4.125˝ (216 x 104mm)CTC OF BOLTS: 4.75˝ (121mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0195 Ring Knocker0195030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0195.xxx Ring Knocker 1 1.5 $119 $140SIZE: 4.25˝ x 5.5˝ (108 x 140mm)CTC OF BOLTS: 3.75˝ (95mm)PACKED: One (1) in a box, poly-bagged, with proper fasteners for 1.75” thick doors0155, 0156 Observascope0155Item #DescriptionPerBox Wt. 030, 2600155.xxx Observ-O-Scope (doors

GENERAL HARDWAREBELL BUTTONS | HOUSE NUMBERS4852 Oval Bell Button4852030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.4852.xxx Oval Bell Button 1 0.1 $41 $48SIZE: 2˝ x 1.125˝ (51 x 29mm)FEATURES: Solid brass construction, Antique White button always illuminated for night detection.PACKED: Individually poly-bagged. All bags are coded with product number, description and UPC codes.ELECTRICAL: Switch is rated at 16V. DC4853 Rectangular Bell Button4853030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.4853.xxx Rectangular Bell Button 1 0.1 $33 $39SIZE: 2.25˝ x 1˝ (57 x 25mm)FEATURES: Solid brass construction, Antique White button always illuminated for night detection.PACKED: Individually poly-bagged. All bags are coded with product number, description and UPC codes.ELECTRICAL: Switch is rated at 16V. DC4857 Victorian Bell Button4857030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.4857.xxx Victorian Bell Button 1 0.1 $47 $57SIZE: 2˝ x 1.5˝ (51 x 38mm)FEATURES: Solid brass construction, Antique White button always illuminated for night detection.PACKED: Individually poly-bagged. All bags are coded with product number, description and UPC codes.ELECTRICAL: Switch is rated at 16V. DC4858 Oval Bell Button4858030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.4858.xxx Oval Bell Button 1 0.2 $48 $57SIZE: 3˝ x 1.75˝ (76 x 43mm)FEATURES: Solid brass construction, Antique White button always illuminated for night detection.PACKED: Individually poly-bagged. All bags are coded with product number, description and UPC codes.ELECTRICAL: Switch is rated at 16V. DCHouse NumbersItem #DescriptionPerBox Wt.90670.xxx.CD House Number - 0 1 0.690671.xxx.CD House Number - 1 1 0.690672.xxx.CD House Number - 2 1 0.690673.xxx.CD House Number - 3 1 0.690674.xxx.CD House Number - 4 1 0.690675.xxx.CD House Number - 5 1 0.690676.xxx.CD House Number - 6 1 0.690677.xxx.CD House Number - 7 1 0.690678.xxx.CD House Number - 8 1 0.690679.xxx.CD House Number - 9 1 0.6030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452$20 $23FEATURES: 4.75˝ tall solid forged brass residential house numbers applied with truss head wood screws.PROJECTION: .312˝ (8mmPACKED: Includes fasteners187

GENERAL HARDWAREDOOR GUARDS | SURFACE BOLTS0250 Security Door Guard02500260 Chain Door Fastener0260030, 031, 033034, 040, 050060, 102, 112Item #DescriptionPerBox Wt.140, 150, 151190, 260, 264 0030250.xxx Security Door Guard 1 0.5 $32 $38SIZE: Jamb Plate: 1˝ x 2.625˝ (25 x 67mm)ARM LENGTH: Center of Rivets/Jamb Plate to End of Arm: 4.625˝ (117mm)STRIKE PLATE: 1.187˝ x 1.187˝ (30 x 30mm)STRIKE LENGTH: 3.062˝ (78mm)FEATURES: Allows door to be opened up to 4˝ while maintaining security. Hinges onto a strike mounted on door,eliminating scratching caused by conventional chain door fasteners. When not in use, the hinged door guardis positioned 180° away from door.PACKED: Individually poly-bagged with sheet metalscrews. All bags are coded with product number, description andUPC codes.Per 030, 031, 102Item #DescriptionBox Wt. 140, 260, 2640260.xxx Chain Door Fastener 10 3.6 $15SIZE: Door Plate: 1.375˝ x 3.375˝ (35 x 86mm)JAMB LENGTH: .687˝ X 2˝ (17 X 51mm)CHAIN LENGTH: 7.5˝ (191mm)FEATURES: With chain hooked on, door can be opened 4.5˝PACKED: Individually poly-bagged with sheet metal screws.0310 StrikesItem #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 003HDASANGL0310.xxx.HDAS0310.xxx.ANGLStrike – Heavy Duty AngleUse with: 0344, 0345, 0346, 0370, 0378,0379, 0380, 0381, 0382, 0383Strike – AngleUse with: 0344, 0345, 0346, 0370, 0378,0379, 0380, 0381, 0382, 03831 $26 $271 8 90310.xxx.MORTStrike – MortiseUse with: 0345, 0370, 0378, 0379, 0380,0381, 0382, 03831 8 9MORTSURF0310.xxx.SURFStrike – SurfaceUse with: 0344, 0345, 0346, 0370, 0378,0379, 0380, 0381, 0382, 03831 8 90310.xxx.UNIVStrike – UniversalUse with: 0344, 0345, 0346, 0370, 0378,0379, 0380, 0381, 0382, 03831 7 8UNIV0320 StrikesItem #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 003MORTUNIV0320.xxx.MORT0320.xxx.UNIVStrike – MortiseUse with: 0321, 0322, 0324Strike – universalUse with: 0321, 0322, 03241010$10 $13

GENERAL HARDWARESURFACE BOLTS0321, 0322, 0324 General Purpose Surface BoltsSupplied w/0320 Strikes0321,0322, 0324SPRING CONSTRUCTIONItem #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0030321.xxx Surface Bolt – 3˝ 10 1.8 $25 $280322.xxx Surface Bolt – 4˝ 10 2.2 26 290324.xxx Surface Bolt – 6˝ 10 3.3 29 33SIZES: .5˝ (13mm) width rod, .5˝ (13mm) width of guide, .875˝ (22mm) throw.FEATURES: Mounted on a fully concealed guide of special design. Fasteners are not visible.PACKED: Includes Universal and Mortise Strikes and screws.BHMA DESIGNATION: L041510344, 0346, 0370 Decorative Heavy Duty Semi-ConcealedSupplied w/0310 Strikes0344,0346, 0370Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0030344.xxx Surface Bolt – 4˝ 5 2.6 $43 $440346.xxx Surface Bolt – 6˝ 5 3 49 500370.xxx Surface Bolt – 8˝ 5 3.3 54 55SIZES: Width of rod: .625˝ (16mm). Width of guide: 1.5˝ (38mm).FEATURES: Attractive and rugged bolts designed for use on heavy doors. Large and decorative 1.25˝ (32mm) diameterknob designed for easier handling. Heavy gauge strikes will take high abuse.PACKED: 5 in a box with Universal and Mortise Strikes and screws.STRIKES: Additional strikes are available at an extra charge. Consult price list.0345 Heavy Duty Dutch Door BoltSupplied w/0310 Strike0345SPRING CONSTRUCTION030, 031, 033034, 040, 050060, 102, 112Item #DescriptionPerBox Wt.140, 150, 151190, 260, 264 0030345.xxx Dutch Door Bolt 5 3.8 $44 $47SIZES: Rod width: .625˝ (16mm). Guide width: 1.5˝ (38mm).Length of bolt: 4.25˝ (108mm). Bolt throw: 1.125˝ (28mm).FEATURES: Our Dutch Door Bolt is made of heavy solid brass extrusions, precisely fitted for easier operation. Whenused on Dutch doors the leaves of doors are tightly joined by chamfered rod end. Proper amount of play isprovided in strike allowing for misalignment of the two leaves. This prevents bolt from binding. Large anddecorative 1.25˝ (32mm) diameter knob is for easier handling.PACKED:5 in a box with proper fasteners and strike as illustrated.STRIKES: Universal, Angle, Mortise, and Surface Strikes available at an extra charge. Consult price list.0378 – 0383 Ornamental Heavy Duty Surface BoltSupplied w/0310 Strike0378 – 0383Item #DescriptionNo. ofCoversPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0030378.xxx Surface Bolt – 4˝ (102mm) 2 5 3.1 $60 $620379.xxx Surface Bolt – 6˝ (152mm) 2 5 3.5 75 890380.xxx Surface Bolt – 8˝ (203mm) 2 1 0.8 95 1110381.xxx Surface Bolt – 12˝ (305mm) 3 1 1.2 119 1400382.xxx Surface Bolt – 18˝ (457mm) 3 1 1.7 138 1630383.xxx Surface Bolt – 24˝ (610mm) 4 1 1.9 164 191SIZES: Width of rod: .625˝ (16mm). Width of guide: 1.75˝ (44mm).FEATURES: Ornamental cover plates conceal mounting guides underneath the bolt without marring the surface of the rod.Large 1.25˝ (32mm) diameter knob designed for easier operation. Heavy gauge strikes will take high abuse.PACKED: Nos. 0378, 0379: 5 in a box with Universal and Mortise Strikes and screws. All others: One in a box withUniversal and Mortise Strikes and screws.STRIKES: Additional strikes are available at an extra charge. Consult price list.189

GENERAL HARDWAREFLUSH RINGS0392 – 0395 Flush Ring Pull0392, 03930394, 0395Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4520392.xxx Flush Ring Pull – 1.25˝ x 1.5˝ 10 0.9 $22 $230393.xxx Flush Ring Pull – 1.625˝ x 1.625˝ 10 1 22 NA0394.xxx Flush Ring Pull – 1.875˝ x 2.5˝ 10 2.3 32 380395.xxx Flush Ring Pull – 2.5˝ x 3.3˝ 10 4.5 41 44FEATURES: Solid forged construction for maximum strength and durability, Flush Ring Pulls,are recommended for marine use and where flush installation is essential.PACKED: Includes wood screws.BHMA DESIGNATION: J404NOTES: Not intended to be used as a tie down.0397 Flush Cup Handle & Ring Pull0397Item #DescriptionPerBox0397.xxx Flush Cup Handle (Brass) – 3.5˝x 3.5˝ 10397.xxx.SOL Flush Ring Pull for latches/locks w/solid spindle 10397.xxx.SWL Flush Ring Pull for latches/locks w/swivel spindle 1Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4520.9 $149 $161FEATURES: Solid forged construction for maximum strength and durability, Flush Ring Pulls,are recommended for marine use and where flush installation is essential.PACKED: Includes wood screws.BHMA DESIGNATION: J404NOTES: Not intended to be used as a tie down.IMPORTANT: No. 0397 Flush Ring Pull is specifically designed for use with mortise locks/latches. Available only for back-to-back or single mounting applications on 2˝ (51mm)minimum thick doors or 1.75˝ (44mm) minimum thick doors with .25˝ (6mm)minimum applied panel. Application must be designated when ordering.

GENERAL HARDWAREEDGE PULL | ROLLER & BALL CATCHES0465 Edge Pull0465030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.0465.xxx Edge Pull – .75˝ x 1.625˝ x 3.875˝ 10 1.2 $16 $17FEATURES: Specially designed spring loaded Edge Pull returns lever flush with face plate. Narrow design eliminatesinstallation problems on thin door conditions. Intended for use on pocket door applications.PACKED: Includes wood screws.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1861BHMA DESIGNATION: D2801NOTES: Not recommended for doors larger than 3.0’ x 6’8˝ x 1.75˝ thick.0425, 0426 Adjustable Ball Catch042504260440 Adjustable Roller Catch0440Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0030425.xxx Adjustable Ball Catch (fitted in jamb) 10 2.1 $19 $240426.xxx Adjustable Ball Catch (fitted in door) 10 2.2 19 24SIZE: Face Plate: 1˝ × 2.125˝ (25 × 54mm)Bore: .875˝ dia. × 1.25˝ long (22 × 32mm)0425.xxx Strike: 1.06˝ x 2.125˝, Lip to Center: .56˝0426.xxx Strike: 1.375˝ x 2.125˝, Lip to Center: .875˝FEATURES: Dual adjustment ball bearing catch of excellent design takes advantage of rolling ball action for perfecttension. Infinite adjustments for compensation of various door clearances, swelling, shrinking, drafts andweights. Recommended for use on louvered, bi-folding, accordion, closet and light to medium service doors.PACKED: Includes wood screws.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1861BHMA DESIGNATION: D2801NOTES: Not recommended for doors larger than 3.0’ x 6’8˝ x 1.75˝ thick.030, 031, 033034, 040, 050060, 102, 112Item #DescriptionPerBox Wt.140, 150, 151190, 260, 264 0030440.xxx Adjustable Roller Catch 10 2.2 $23 $28SIZE: Face Plate: 1˝ × 2.25˝ (25x57mm)Bore: 1˝ dia. × 1.625˝ long (25x41mm)Strike: 1.125˝ × 2.75˝ (29x70mm)Lip to Center: 1.312˝ (33mm)FEATURES: Adjustable tension heavy duty roller catches made for cabinet, closet and interior doors. Easilyinstalled on thick doors. Smooth action. Fully adjustable from 3 lbs. (1.36kg) to 18 lbs.(8.16kg) of heading pressure. Equipped with durable nylon roller for quiet operation.PACKED: Includes fasteners.0430, 0432 Roller Latchw/strike04300432with0430with0432Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0030430.xxx Roller Latch w/ Full Lip Strike 1 0.7 $75 $800432.xxx Roller Latch w/ t Strike 1 0.7 75 80SIZE: 0432.xxx Lip To Center Dimension: 1.25˝ (32mm).FEATURES: Designed for use on interior doors in hospitals or where quiet operation is required. Very sturdy allforged brass construction throughout. Specifically compounded rubber roller silently engages the strikeand holds the door firmly closed without the loud clicks of ordinary locks. The projection of the roller isadjustable for various door clearances. Specially designed adjusting screws mounted in the face platepermit fine and accurate tensioning of rubber after installation. Designed to ANSI template specifications.PACKED: Includes wood screws and machine screws.TEMPLATE: Doors/frames to be prepared in accordance with ANSI A115.1-1976 or A115.2-1980.ORDERING INSTRUCTIONS: Item number listed under illustrated strike designates complete latchunit and strike. (Example: 0431 includes latch mechanism and ASA strike.)FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 193BHMA DESIGNATION: EO9091191

GENERAL HARDWAREFLUSH, CASEMENT FASTENERS & SASH PULLS0452 Sash Lock04520458 Flush Pull0458Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520452.xxx Sash Lock 10 2.2 $18 $20SIZE: Latch Base: .968˝ × 2.437˝ (25 × 62mm)Strike Base: .656˝ × 2.437˝ (15 × 62mm)PROJECTION: .906˝ (23mm)CTC OF HOLES: 2˝ (51mm)FEATURES: Traditional style sash lock with heavy duty spring to provide constant tension for a non-rattling fit.Center to center of mounting screws conforms to industry standards.PACKED: Includes necessary fasteners.BHMA DESIGNATION: L05121Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520458.xxx Flush Pull, 1.5˝ x 3.5˝ 10 2.7 $23 $26SIZE: Base: 1.5˝ × 3.5˝ (38 × 89mm)THICKNESS OF FLANGE: .187˝ (5mm)FEATURES: Decorative flush pull designed to be used as a sash lift or sliding door pull if pocket allows clearance.Colonial design makes it suitable for Early American interiors. Extra heavy solid forged brass construction.NOTE: Pull has .25˝ projectionPACKED: Includes wood screws.0470 Sash Lift0470Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520470.xxx Sash Lift, 4˝ x 1.125˝ 10 1 $19 $20SIZE: Base: 4˝ × 1.125˝ (102 × 29mm)PROJECTION: .1˝ (25mm)PACKED: Includes wood screws.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1204BHMA DESIGNATION: L051810491 – 0493 Casement Fastener0491, 0492, 04930491.xxx.MORT0491.xxx.RIMItem #DescriptionPerBox0491.xxx.MORT Strike – Mortise 100491.xxx.RIM Strike – Rim 100491.xxx.SURF Strike – Surface 10Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 452$8 $90491.xxx Casement Fastener w/surface strike 10 1.8 26 270492.xxx Casement Fastener w/rim strike 10 1.8 32 330493.xxx Casement Fastener w/mortise strike 10 1.8 39 40SIZE: Base: 1.625˝ × .875˝ (41 × 22mm)PROJECTION: .1.375˝ (35mm)FEATURES: Solid forged brass construction doubles the tensile strength over ordinary sand castings. Assembled withspecial self lubricating washer for positive constant tension and smooth operation. High quality designeliminates surface imperfections for attractive appearance.PACKED: Includes wood screws.STRIKES: Packed with one strike as specified. Other strikes available at an extra charge. Consult price list.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1135BHMA DESIGNATION: L05111ORDERING INSTRUCTIONS: 0491 indicates Casement Fastener is furnished with a Surface Strike.0492 indicates Casement Fastener is furnished with a Rim Strike.0493 indicates Casement Fastener is furnished with a Mortise Strike.0491.xxx.SURF

GENERAL HARDWARECASEMENT FASTENERS | COSTUME HOOKS0494 – 0496 Casement Fastener0494, 0495, 04960494.xxx.MORT0494.xxx.RIM0494.xxx.SURFItem #DescriptionPerBox0494.xxx.MORT Strike – Mortise 100494.xxx.RIM Strike – Rim 100494.xxx.SURF Strike – Surface 10Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 452$9 $100494.xxx Casement Fastener w/surface strike 10 3.8 27 280495.xxx Casement Fastener w/rim strike 10 3.8 42 430496.xxx Casement Fastener w/mortise stike 10 3.8 34 36SIZE: Base: 2.0625˝ × 1.0625˝ (52 × 27mm)PROJECTION: 1.875˝ (48mm)FEATURES: Solid forged brass construction doubles the tensile strength over ordinary sand castings. Assembled withspecial self lubricating washer for positive constant tension and smooth operation. High quality designeliminates surface imperfections for attractive appearance.PACKED: Includes wood screws.STRIKES: Packed with one strike as specified. Other strikes available at an extra charge. Consult price list.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1135BHMA DESIGNATION: L05101ORDERING INSTRUCTIONS: 0494 indicates Casement Fastener is furnished with a Surface Strike.0495 indicates Casement Fastener is furnished with a Rim Strike.0496 indicates Casement Fastener is furnished with a Mortise Strike.0740, 0742, 0781, 0782 Costume Hook0740Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264402412, 4520740.xxxCostume Hook, 2.25˝ (57mm) height x3˝ (76mm) projection10/25 1.7 $20 $210742.xxxCostume Hook, 5.375˝ (137mm) h. x3.5˝ (89mm) p.1/25 0.5 29 300781.xxxCostume Hook, 2.875˝ (73mm) h. x3.25˝ (83mm) p.5/25 1.1 26 300782.xxxCostume Hook, 2.1875˝ (56mm) h. x2.5˝ (64mm) p.5 1 26 27HEIGHT: 2.25˝ (57mm)PROJECTION: 3˝ (76mm)FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1172BHMA DESIGNATION: LO3111074207810782193

GENERAL HARDWAREFLUSH BOLTS & STRIKES0950 – 0952 Swivel Type Cabin Door Hook0950, 0951, 09520600, 0626 Flush BoltsCB06000626AItem #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520950.xxx Cabin Door Hook – swivel type – 2.5˝ 10 1.5 $27 $280951.xxx Cabin Door Hook – swivel type – 3.5˝ 10 3.4 33 340952.xxx Cabin Door Hook – swivel type – 5.5˝ 10 5 40 41FEATURES: These hooks are designed with a dual hinge action and tapered end to eliminate rattle and ensure secure fitPACKED: Complete with wood screws.Dimensions A B C0950.xxx 2.5˝ 0.84˝ 1.125˝0951.xxx 3.5˝ 1.125˝ 1.5˝0952.xxx 5.5˝ 1.25˝ 1.6˝Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520600.xxx.12 Flush Bolt w/ 12˝ Rod (Standard) 1 1.80600.xxx.18 Flush Bolt w/ 18˝ Rod 1 1.8 $28 $290600.xxx.24 Flush Bolt w/ 24˝ Rod 1 1.80626.xxx Flush Bolt – 6˝ 10 3.8 22 230600.xxxSIZE: Face Plate: 1˝ × 6.75˝ (25mm × 171mm).Bolt Head: .5˝ (13mm). Rod Backset: .75˝ (19mm).FEATURES: Hot forged extension bolt having over .75˝ (19mm) throw. Unique push button design of lever anddelay action for easy operation. Lever does not engage the bolt until it is hinged freely to 45 angle.At this position it is easy to move the bolt head. Lever snaps automatically when hinged beyond45 angle. Made to template for easy installation in metal door frames. Use of strike optional.PACKED: One in a box with 12˝ (305mm) rods standard. Bolts packed with machine/wood screws forall conditions. Lengths given are from center of bolt mechanism with bolt retracted.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1049BHMA DESIGNATION: LO40810626.xxxSIZE: 1˝ Throw, .47˝ Backset of Rod, .5˝ Bolt Head Diameter.FEATURES: 6˝ (152mm) length. Sharply defined edge and recess. Smooth working action withautomatic holding spring for both retracted and projected positions.PACKED: Individually poly-bagged with screws and strike, 10 in a box.0602 – 0604 Rabbeted Parts06020603 0604Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520602.xxx Rabbeted Piece for 0600 (Includes Screws) 1 0.8 $52 $620603.xxx Rabbeted Strike 1 52 570604.xxx Rabbeted Guide 1 41 430603.xxx, 0604.xxxNOTE: All holes countersunk for no. 6F.M. screws.0622 Locking Type Dustproof Strike0622Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4520622.xxx Dustproof Strike 1 0.6 $22 $23FEATURES: Dustproof strike is ideal for concrete installations. Large size plate and the spread of screw holes have betterholding power in concrete slabs. This dustproof strike can be used for installation in metal thresholds byremoving the face plate. To install, drill 1˝ (25mm) diameter hole and tighten lock nut. To lock the strike forpedestrian traffic, insert a coin in slot and turn clockwise. To convert for flush bolt use, turn counterclockwise.PACKED: Solid brass locking type dustproof strike with face plate, machine screws and expansion shields.NOTE: For use with 0600 Flush Bolt only.

GENERAL HARDWAREKICK PLATES2000.xxx.0630 Kick PlateItem #DescriptionPerBox Wt.040102, 112, 1902000.xxx.0630 6˝ x 30˝, .05˝ thick brass 1 $55FEATURES: Protect bottom of doors from scuffing. Holes are spaced approximately 6˝ on centers. Most plates suppliedwith Phillips head sheet metal screws to match. Plates are not beveled.PACKED: Each plate is wrapped in strong kraft paper and supplied with matching fasteners.PROTECTIVE COATING: All brass plates are coated with a highly durable baked-on enamel to protect the finish.2000.xxx.06302000.xxx.0634, 2000.xxx.0830, 2000.xxx.0834 Kick PlatesItem #DescriptionPerBoxWt.031, 040, 050060, 102, 112150, 151, 1902000.xxx.0634 6˝ x 34˝, .05˝ thick brass 1 $802000.xxx.0830 8˝ x 30˝, .05˝ thick brass 1 922000.xxx.0834 8˝ x 34˝, .05˝ thick brass 1 92**Also available in 264FEATURES: Protect bottom of doors from scuffing. Holes are spaced approximately 6˝ on centers. Most plates suppliedwith Phillips head sheet metal screws to match. Plates are not beveled.PACKED: Each plate is wrapped in strong kraft paper and supplied with matching fasteners.PROTECTIVE COATING: All brass plates are coated with a highly durable baked-on enamel to protect the finish.2000.xxx.06342001.xxx Kick PlatesItem #DescriptionPerBox Wt. 150, 1512001.xxx.0630 6˝ x 30˝, .04˝ thick stainless steel 1 $80 $872001.xxx.0634 6˝ x 34˝, .04˝ thick stainless steel 1 91 1002001.xxx.0834 8˝ x 34˝, .04˝ thick stainless steel 1 104 111FEATURES: Protect bottom of doors from scuffing. Holes are spaced approximately 6˝ on centers. Most plates suppliedwith Phillips head sheet metal screws to match. Plates are not beveled.PACKED: Each plate is packed in attractive corrugated holder and supplied with matching fasteners.0030550562001.xxx.0834195

GENERAL HARDWAREPUSH PLATES2110, 2115 Rounded2110, 2115Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0032110.xxx Round Corner Push Plate – 3.5˝ x 15˝ 10 0.8 $30 $352115.xxx Round Corner Push Plate – 4˝ x 16˝ 10 0.9 36 41FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with oval head–undercut,stainless steel, sheet metal screws plated to match.BHMA DESIGNATION: J3022121 – 2124 Square Edge2121, 2123, 2124PerItem #DescriptionBox Wt.2121.xxx Square Edge Push Plate – 3˝ x 12˝ 10 0.52123.xxx Square Edge Push Plate – 3.5˝ x 15˝ 10 0.9$372124.xxx Square Edge Push Plate – 4˝ x 16˝ 10 1 34030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 003$49FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with oval head–undercut,stainless steel, sheet metal screws plated to match.BHMA DESIGNATION: J3012262, 2265 Arched2262, 2265Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0032262.xxx Arched Push Plate – 3.5˝ x 12˝ 10 0.6 $43 $482265.xxx Arched Push Plate – 3.5˝ x 15˝ 10 0.7 49 61FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with full thread wood screws.2275, 2276 Scalloped2275, 2276030, 031, 033034, 040, 050060, 102, 112Item #DescriptionPerBox Wt.140, 150, 151190, 260, 264 0032275.xxx Scalloped Push Plate – 3.5˝ x 15˝ 5 1.5 $492276.xxx Scalloped Push Plate – 3˝ x 12˝ 5 1 43$61FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with full thread wood screws.2280, 2281 Nashville2280, 2281Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 0032280.xxx Nashville Push Plate – 3.5˝ x 15˝ 3 1.9 $117 $1532281.xxx Nashville Push Plate – 3.5˝ x 20˝ 1 2.6 102 133FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with full thread wood screws.

GENERAL HARDWAREPUSH PLATES | PULL PLATES2282 San Francisco2282030, 031, 033034, 040, 050060, 102, 112Item #DescriptionPerBox Wt.140, 150, 151190, 260, 264 0032282.xxx San Francisco Push Plate – 2.25˝ x 11.875˝ 3 1.3 $128 $133FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with oval head–undercut,stainless steel, sheet metal screws plated to match.2285 Bristol2285Item #DescriptionPerBox Wt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522285.xxx Bristol Push Plate – 2.75˝ x 10.875˝ 3 1.4 $117 $153FEATURES: Mix any door pulls and push plates shown to create your own look. Pulls are always centered on plates.PACKED: Each plate is individually wrapped and furnished with oval head–undercut,stainless steel, sheet metal screws plated to match.2331, 2335, 2337, 2355, 2357 Pull Plate2331, 2335, 2337Item #DescriptionPerBox Wt.2331.xxx 2560 Pull x 2121 Pull Plate – 3˝ x 12˝ 1 1.32335.xxx 2560 Pull x 2123 Pull Plate – 3.5˝ x 15˝ 1 1.52337.xxx 2560 Pull x 2124 Pull Plate – 4˝ x 16˝ 1 1.72355.xxx 2540 Pull x 2123 Pull Plate – 3.5˝ x 15˝ 1 1.62357.xxx2540 Pull x 2124 Pull Plate – 4˝ x 16˝030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264 003$149 $175157 175FEATURES: Pulls are attached to plates with concealed fasteners for ease of installation.PACKED: One complete pull plate in a box with fasteners for 1.75˝ (44mm) thick door.SPECIAL FASTENERS: Order 6501.000.D for door 1-7/8˝ to 2-1/4˝ thick. Consult price list.BHMA EQUIVALENTS: Baldwin Product Nos.: 2330/2350 SeriesBHMA DESIGNATION: J4052355, 2357Pull – Invisible Mounting MethodsBack-To-Back Applications without Push Plates onlyMTG1MTG3MTG2MTG5MTG8Item #DescriptionAdditionalChargexxxx.xxx.MTG1 Wood Door w/ thru Bolt, Back-to-Back Set $19xxxx.xxx.MTG2 Hollow Metal Door, Back-to-Back Set 19xxxx.xxx.MTG3 Glass Door Prep w/ rosettes, Back-to-Back Set 75xxxx.xxx.MTG5 Wood Door, no thru Bolt, Per Pull 13xxxx.xxx.MTG8 Glass Door Prep w/ rosettes, Per Pull 39NOTE: MTG1 - Minimum Pull Thickness: .5˝ (13mm)MTG2 - Minimum Pull Thickness: .5˝ (13mm), Door must be reinforced at application points.MTG3 - Minimum Pull Thickness: .5˝ (13mm), Minimum Glass Thickness: 3/8˝, Hole Size: 7/8˝MTG5 - Minimum Pull Thickness: .5˝ (13mm)MTG8 - Minimum Pull Thickness: None, Complete with screw coverORDERING INSTRUCTIONS: ALWAYS specify door thickness when orderinginvisible mounting applications. Refer to examples when ordering pulls:2704.xxx.MTG1 - will include two 2704 pulls and mounting hardware for specifications shown.2704.xxx.MTG5 - will include one 2704 pull and mounting hardware for specifications shown.197

GENERAL HARDWAREDOOR PULLS2540, 2552, 2553 Contemporary & SanDiegoItem #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522540, 2552, 25532540.xxx2552.xxxContemporary – 5.5˝ CTCSan Diego – 8˝ CTC$80 $1052553.xxxContemporary – 10˝ CTCFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2556, 2557 New York/Princeton/Richland & AtlantaItem #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522556, 25572556.xxx2557.xxxNew York/Princeton/Richland – 5.75˝ CTCAtlanta – 7˝ CTC$80 $105FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2560 UtilityNot available for back-to-back mounting2560Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522560.xxx* Utility – 5.5˝ CTC $80 $105*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2564 Tremont & Empire2564030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522564.xxx Tremont/Empire – 7˝ CTC $80 $105FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2574 – 2576, 2578 RichmondItem #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522574, 2575 2576, 25782574.xxx2575.xxx2576.xxxRichmond – 8˝ CTCXL Richmond – 10˝ CTCRichmond w/roses – 8˝ CTC$145 $1672578.xxxXL Richmond w/roses – 10˝ CTCFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.

GENERAL HARDWAREDOOR PULLS2584 Hamilton25841.002.257.00030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522584.xxx Hamilton – 7˝ CTC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2585 ConcordNot available for back-to-back mounting2585Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522585.xxx* Concord – 5.5˝ CTC $145 $167*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2597 Edinburgh25971.002.31 2318.00030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522597.xxx Edinburgh – 8˝ CTC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2598 Bristol25982.256.00030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522598.xxx Bristol – 6˝ CTC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2602 Lexingtonw/platesNot available for back-to-back mounting2602030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522602.xxx* Lexington w/plates – 6.5˝ CTC $80 $105Not Available back-to-back mounting.FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.199

GENERAL HARDWAREDOOR PULLS2604 Renssalear2604030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522604.xxx Renssalear – 10˝ CtC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2608 PitcherSurface Mount2608030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522608.xxx Pitcher, surface mount – 6.5˝ CtC $80 $105FEATURES: Mix any door pulls and push plates shown to create your own look. FEATURES:Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2617 SpringfieldNot available for back-to-back mounting2617Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522617.xxx* Springfield – 6.5˝ $80 $105*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2673 Lancaster/Charleston/Plymouth2673030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522673.xxx Lancaster/Charleston/Plymouth – 6˝ CtC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2674 Pasadena26741.002.318.00030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522674.xxx Pasadena – 8˝ CtC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.

GENERAL HARDWAREPULLS2675 Ring PullNot available for back-to-back mounting2675Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522675.xxx* Ring Pull $145 $167*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2692 TrentonNot available for back-to-back mounting2692Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522692.xxx* Trenton – 6.5˝ CtC $145 $167*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2693 Kensington/VictoriaNot available for back-to-back mounting2693Item #Description030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4522693.xxx* Kensington/Victoria – 6.5˝ CtC $145 $167*Not available back-to-back mountingFEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.2704 Monterey2704030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4522704.xxx Monterey – 5.75˝ CtC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.5340 Tahoe53401.122.447.75030, 031, 033034, 040, 050060, 102, 112Item #Description140, 150, 151190, 260, 264003, 402412, 4525340.xxx Tahoe – 7.75˝ CtC $145 $167FEATURES: Mix any door pulls and push plates shown to create your own look. Contemporaryand traditional screw covers are available to conceal heads of thru bolts.PACKED: One pull in a box with thru bolts for 1.75˝ thick doors.NOTE: For door thickness 1.825-2.25˝ use 6501.000.D conversion kit.HANDICAP: Pulls designated have 1.5˝ maximum inside projection tomeet ADA, ANSI & handicap code conditions.201

DOOR STOPSFLOOR MOUNTED4000, 4005, 4010 Half Dome Door Bumper40004005125 mm1.2532 mm.1875 mm2Item #DescriptionPerBox Wt.4000.xxx Half Dome Door Bumper – 1˝ Ht. 50 124005.xxx Half Dome Door Bumper – 1.25˝ Ht. 40 16.64010.xxx Half Dome Door Bumper – 1.375˝ Ht. 40 19FEATURES: “Half Dome” design minimizes stumbling hazards and cleaning interference. Thicksolid rubber bumper of special design is compounded for greater resiliency.PACKED: Individually poly-bagged with appropriate fasteners in a dispensing type carton.FASTENERS: Supplied with fasteners for wood, plaster, and masonry installations.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1330/1330ABHMA DESIGNATION: L02141 (No. 4000)L02161 (No. 4005/No. 4010)REPLACEMENT RUBBER: No. 4000.406 for 4000/4005/4010030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264402412452$13 $18.37510 mm1.87548 mm40101.37535 mm.513 mm1.87548 mm4207, 4209, 4210 Riser for Dome Bumper4207, 4209, 42104505, 4507 Universal Floor Bumper45054507Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2644207.xxx Riser for Dome Bumper – .5˝ Ht. 25 2.5 $104209.xxx Riser for Dome Bumper – .75˝ Ht. 25 3.3 124210.xxx Riser for Dome Bumper – .75˝ Ht. 25 3.5 11FEATURES: Made for use on carpeted floors. Only an “X” cut is required in the carpet to installthe riser. The pile of the carpet will form around the riser and fill in under the bumper,concealing the installation. Made of extruded aluminum; mill finish. When orderedseparately, risers are furnished with fasteners, plated to match door bumpers.PACKED: Individually poly-bagged with appropriate fasteners.ORDERING INSTRUCTIONS: To determine overall bumper height with riser, refer to door bumper chart. Risersare designed to fit all No. 4000 series floor bumpers. Always specify floor condition and finish for proper fastener.Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2644505.xxx Floor Bumper – 1.5˝ Dia. 10 4 $24 $294507.406* Replacement rubber for 4505 (Floor Bumper) 1 6*Finish 406 onlyFEATURES: Designed for concealed mounting applications, this contemporary floor bumper contains themounting screw within the body of the bumper. The rubber insert is located .798˝ (20mm)from the bottom to function on doors with a .375˝ (9.5mm) to a 1˝ (25mm) undercut. Tofacilitate the replacement of the rubber guard, simply remove the top cap.PACKED: Individually poly-bagged with appropriate fasteners.ORDERING INSTRUCTIONS: Supplied with a wood screw and plastic anchor.4024124524510 Floor BumperItem #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2644024124522.062"4510.xxx Floor Bumper 1 0.6 $30 $3545102.812"FEATURES: Forged construction floor bumper is designed for use on doors with or withoutthresholds. Modern and streamlined shape reduces obtrusive appearance. Highprojection obviates the use of inventorying different heights of floor bumpers.PACKED: Supplied with wood and masonry fasteners.BHMA Designation: L02181

DOOR STOPSDOOR & WALL MOUNTED4100, 4101, 4105, 4507 Lever Type Door Holder4100, 41054101, 45074041, 4045, 4050, 4055, 4057 Base Mounted Door Bumpers4045, 40504041.40640554057.4064015, 4252 Convex Wall Bumpers401542524273, 4293 Concave Wall Bumpers4273Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2644024124524100.xxx Lever Door Holder – 4˝ L.-Max floor clearance: 3˝ 10 4.4 $274101.406* Replacement tip for 4100 1 64105.xxx Lever Door Holder – 5˝ L.-Max floor clearance: 4˝ 10 5 29 344507.406* Replacement rubber for 4505 1 6*Finish 406 onlyFEATURES: Forged Brass construction incorporating a stainless steel hinging pin for added strength. This holdercan be operated by foot. Highest quality non-marring rubber tip grips floor and holds the door at anydesired opening. A spring catch holds the lever in an upright, disengaged position when holder isnot in use. Specially designed rubber shoe will not loosen in service but can easily be replaced.PACKED: Individually poly-bagged with appropriate fasteners in a dispensing type carton.FASTENERS: Furnished standard with sheet metal screws.Federal Specification Equivalents: Government Type: 1149A/1149BBHMA DESIGNATION: L01391 (4100)L01381 (4105)Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4524045.xxx Wall Door Bumper – 3˝ Proj., 1.1875˝ Dia. 10 2 $15 $204041.406* Replacement tip for 4045 1 5.504050.xxx Wall Door Bumper – 3.75˝ Proj., 1.5˝ Dia. 10 3 15 $204055.xxx** Wall Door Bumper – 3.4˝ Proj., 1.1875˝ Dia. 10 2 15 $204057.406* Replacement tip for 4055 1 5.50*Finish 406 only**Not available in 003FEATURES: Solid forged brass construction for maximum strength and durability. Stem of bumper has hexagon sectionto facilitate fastening without damaging finish. Resilient rubber guard is replaceable.4055.xxx is designed for quick and efficient installation by power driven tools, using socket type wrench.PACKED: Individually poly-bagged with appropriate fasteners (1 per poly bag).FASTENERS: Supplied with wood screw thread.Federal Specification Equivalents: Government Type: 1322BHMA DESIGNATION: L02031PerBox030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 452Item #DescriptionWt.4015.xxx** Wall Flush Bumper – 1˝ Dia. 20 0.8 $12 $174252.xxx Wall Flush Bumper – Convex Design 50 10 12 17**Not available in 0034015 FEATURES: Compact designed bumper permits installation in areas where larger bumpers are not suitabledue to size or projection. Fasteners are totally concealed underneath durable rubber insert.4252 FEATURES: Engineered for commercial/residential installations, this compact and contemporarydesigned bumper features completely concealed fasteners for an unobtrusive and screwlessappearance. Supplied with wood and masonry fasteners, it is furnished unassembled to facilitatethe substitution of fasteners. Designed for ease of installation, the bumper is attached onto a heavygauge metal back plate through a threading application. For a fully theft proof installation, theuse of a strap wrench for tightening or several drops of Loctite Grade A is recommended.4252 PACKED: 50 in a box; individually poly-bagged with appropriate fasteners in a dispensing type carton.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1327 (4252 only)BHMA DESIGNATION: L02101 (4015 & 4252)Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 402412, 4524273.xxx Wall Flush Bumper – Concave Design 1.75˝ Dia. 50 9.6 $12 $174293.xxx*** Wall Flush Bumper – Concave Design 2.375˝ Dia. 25 4.5 12 17***Not available in 402,412 and 4524273 FEATURES: Concave type rubber permits knob of button type lock to strike bumper withoutengaging lock mechanism. Special design protects lock mechanism from damage.42934293 FEATURES: Concave type rubber permits knob of button type lock to strike bumper withoutengaging lock mechanism. Special design protects lock mechanism from damage.PACKED: Individually poly-bagged with wood and masonry fasteners in a dispensing type carton.FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1327 (4293 only)BHMA DESIGNATION: L22251 (4273 & 4293)203

HINGESSPECIFICATIONSMORTISE HINGE SPECIFICATIONSFEATURES: Extruded brass, full mortise hinges are machined for preciseinstallation and smooth movement. Knuckles are milled to a clearance of 0.010˝(.25mm) to minimize vertical wear. Each hinge is beveled on the inside leaf toobtain a tight fit when viewing the hinge in a closed position, and furnished withstainless steel, rust-proof pins for added durability.PIN DESIGN: Each pin is manufactured from precision ground Type 302,stainless steel material to prevent corrosion. The pin “floats” within the barrel of thehinge, yet is held in a stationary position. Pins can be removed by unthreading eachfinial and tapping the pin upward from the bottom of the barrel.FINIAL DESIGN: Hinge finials are specially designed to thread into the top andbottom of the hinge barrel, preventing the pin from rising out of the hinge barrel. Alltips are completely interchangeable to facilitate stocking and eliminate excessiveinventories. Finials can be purchased separately in sets of four only. Hinges arefurnished standard with button design finials.FASTENERS: All full mortise hinges are supplied standard with appropriate sizewood screws as noted on chart. Wood screws are fully threaded to the head andhave an undercut head for secure installations.BEVELED EDGE: Each Baldwin hinge is beveled on the inside leaf to obtain a tightfit when the hinge is in a closed position.EXTRUSION: Hinges manufactured from solid brass extrusions have two inherentproperties: exceptional strength and precision tolerances. Baldwin’s extrudedhinges are machined from a solid brass bar to exact tolerances to ensure an evenwear between each knuckle. The result is a QUALITY hinge which can withstandabove average door weights and stresses with maximum vertical and lateral wearperformance.TEMPLATE: All full mortise hinges illustrated within this section are designedin accordance with the most current specifications established by the AmericanNational Standards Institute (ANSI).APPLICATION: Baldwin full mortise hinges are classified as STANDARD WEIGHTfor installation on doors up to 1.75˝ (44mm) in thickness.NUMBER OF HINGES: Use three hinges on doors up to and including 7.5 feet(2.3m) and one additional hinge for each additional 2.5 feet (.76m) or fractionthereof.NON-REMOVABLE PINS (NRP): Hinges can be obtained with nonremovablepins to prevent removal of hinge pins when the door is in a closedposition. This special application is used when the hinge barrel is exposed tothe exterior side of a building (Reverse Bevel Door Conditions). A stainlesssteel set screw is inserted into the barrel from the inside of the hinge (EmblemMark Side), which intercepts a groove milled on the pin. (Not available onHinge No. 1030). Furnished at an additional charge. Specify as follows:1 pr 1040.030 NRP Hinge - 4˝ x 4˝ = 1040.030.NRPMETAL DOOR APPLICATION: Machine screw packets are available toaccommodate mortise hinge installation for metal doors.> All hinges have a slight offset leaf which provides clearance of .062˝ (1.57mm)when leaves are closed and parallel.> All hinges have template screw hole locations for use on either wood or hollowmetal doors and frames.> Pins are manufactured from precision ground, stainless steel material.> All finials are threaded into the barrel of the hinge to prevent pin from rising.> Finials are completely interchangeable with all full mortise hinge sizes.> Furnished standard with solid brass Phillips head wood screws, undercut, fullythreaded to the head.> Inner leaf is beveled to ensure the tightest possible fit and enhance hingeappearance.> Available with a Non-Removable Pin (NRP) feature (except No. 1030).*Height of hinge is always firstdimension not including tip.Hinge Chart - General SpecificationsItemNo.DoorThicknessDoorWidthHingeSizeLengthof JointWidthOpen Radius Thickness KnucklesWood ScrewQuantity / Size1030 0.875˝– 1.125˝to 36˝ 3˝ x 3˝ 3.0˝ (76mm) 3.0˝ (76mm) — 0.093˝ (2.35mm) 5 12 – No. 10 x 1.0˝ Flat Head-Phillips - Undercut1035 1.375˝ to 32˝ 3.5˝ x 3.5˝ 3.5˝ (89mm) 3.5˝ (89mm) — 0.125˝ (3.18mm) 5 12 – No. 10 x 1.0˝ Flat Head-Phillips - Undercut1040 1.375˝ over 32˝ 4˝ x 4˝ 4.0˝ (102mm) 4.0˝ (102mm) — 0.130˝ (3.30mm) 5 16 – No. 12 x 1.25˝ Flat Head-Phillips - Undercut1041 1.375˝ to 36˝ 4˝ x 4˝ 4.0˝ (102mm) 4.0˝ (102mm) — 0.130˝ (3.30mm) 5 16 – No. 12 x 1.25˝ Flat Head-Phillips - Undercut1045 1.75˝ over 36˝ 4.5˝ x 4.5˝ 4.5˝(114mm) 4.5˝ (114mm) — 0.134˝ (3.40mm) 5 16 – No. 12 x 1.25˝ Flat Head-Phillips - Undercut1046 1.75˝ over 36˝ 4.5˝ x 4.5˝ 4.5˝ (114mm) 4.5˝ (114mm) — 0.134˝ (3.70mm) 5 16 – No. 12 x 1.25˝ Flat Head-Phillips - Undercut1051 2˝– 2.25˝ to 42˝ 5˝ x 5˝ 5.0˝ (127mm) 5.0˝ (127mm) — 0.146˝ (3.70mm) 5 16 – No. 12 x 1.25˝ Flat Head-Phillips - Undercut1135 1.375˝ to 32˝ 3.5˝ x 3.5˝ 3.5˝ (89mm) 3.5˝ (89mm) .625˝ 0.093˝ 5 12 – No. 10 x 1.0˝ Flat Head-Phillips1435 1.375˝ to 32˝ 3.5˝ x 3.5˝ 3.5˝ (89mm) 3.5˝ (89mm) .25˝ 0.093˝ 5 12 – No. 10 x 1.0˝ Flat Head-Phillips1140 1.375˝ to 32˝ 4˝ x 4˝ 4.0˝ (102mm) 4.0˝ (102mm) .625˝ 0.093˝ 5 16 – No. 10 x 1.0˝ Flat Head-Phillips1440 1.375˝ to 32˝ 4˝ x 4˝ 4.0˝ (102mm) 4.0˝ (102mm) .25˝ 0.093˝ 5 16 – No. 10 x 1.0˝ Flat Head-Phillips*Always consider clearance between door flush with jamb and casing.ORDERING INSTRUCTIONS: Extruded full mortise square corner hinges areavailable with (up to) four types of decorative finials: Ball, Urn, Acorn,and Steeple. Hinges are supplied with a button tip finial standard.Different styles of decorative finials must be ordered at an extracharge.IMPORTANT: Baldwin Hinges are extruded from the fi nest quality brass andindividually machined to close tolerances. The leaves from each hingeare NOT INTERCHANGEABLE with those of any other hinges. To ensuresmooth operation and prevent binding, DO NOT MIX hinge leavesduring installation.

HINGESREPLACEMENT SCREWS & HINGE PINSHInge ConstructionSquare Rounded Ball BearingReplacement ScrewsSquare & Ball Bearing Hinges on METAL DOORSItem # Function 020, 027, 022* 0031052.xxx.MSMETAL DOOR: 12 - 24 x ½˝ Flat Head, Phillips screwsfor use with 1040, 1041, 1045, 1046 & 1051 hingesMETAL DOOR: 10 - 24 x ½˝ Flat Head, Phillips screwsfor use with 1030 & 1035 hinges1063.xxx.MS*Finishes for Machine Screws: 020=030, 022=140, 027=102$4 $144 14Replacement ScrewsSquare & Ball Bearing Hinges on WOOD DOORSItem # Function 0031419.003.056051480.003.05805WOOD DOOR: 12 - 24 x ½˝ Flat Head, Phillips screwsfor use with 1030 & 1035 hingesWOOD DOOR: 10 - 24 x ½˝ Flat Head, Phillips screwsfor use with 1040 & 1041, 1045 1046 & 1051 hinges1.40 NET1.86 NETHinge PinsSquare & Ball Bearing Hinges ONLYItem # Description Standard Box Price1030.000.PIN Hinge pins for 1030 hinges 3 $41035.000.PIN Hinge pins for 1035 hinges 3 41040.000.PIN Hinge pins for 1040 hinges 3 41045.000.PIN Hinge pins for 1045 hinges 3 41051.000.PIN Hinge pins for 1050/1051 hinges 3 4205

HINGESSQUARE CORNER1030 3˝ x 3˝ – Square Corner1030PerItem #DescriptionBox Wt.1030.xxx.I Hinge – 3˝ x 3˝ 1 each 0.5 $34 $44PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with 12 – #10 Flat Head-Phillips wood screws.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521035 3.5˝ x 3.5˝ – Square Corner1035Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521035.xxx.I Hinge – 3.5˝ x 3.5˝ 1 each 0.7 $37 $471035.xxx.INRP Hinge – 3.5˝ x 3.5˝ 1 each 0.7 44 54PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with 12 – #10 Flat Head-Phillips wood screws.1040 4˝ x 4˝ – Square Corner1040Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521040.xxx.I Hinge – 4˝ x 4˝ 1 each 0.8 $40 $501040.xxx.INRP Hinge – 4˝ x 4˝ 1 each 0.8 47 57PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with 16 – #12 Flat Head-Phillips wood screws.1045 4.5˝ x 4.5˝ – Square Corner1045Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521045.xxx.I Hinge – 4.5˝ x 4.5˝ 1 each 1.0 $43 $531045.xxx.INRP Hinge – 4.5˝ x 4.5˝ 1 each 1.0 50 60PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with 16 – #12 Flat Head-Phillips wood screws.1035, 1090 – 1093 Hinge Finials for Square Corner1035 1090 1091 1092 1093Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2641035.xxx.ITIP Button tip 2 each $12 $141090.xxx.I* Ball tip 2 each 14 161091.xxx.I* Urn tip 2 each 14 161092.xxx.I* Acorn tip 2 each 14 161093.xxx.I* Steeple tip 2 each 14 16* To match 402 on hinge, order finial in 102 finish. To match 412 on hinge, order finial in 112 finish.To match 452 finish on hinges, order finials in finish 152.FEATURES: Hinge finials are specially-designed to thread into the top and bottom of the hingebarrel. All finials are completely interchangeable to facilitate stocking and eliminateexcessive inventories. Finials can be purchased separately in sets of 2 only.003055056

HINGESRADIUS CORNER1135 3.5˝ x 3.5˝ – 5 ⁄ 8˝ Radius Corner1135030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.1135.xxx.I 5⁄8˝ Radius Corner Hinge – 3.5˝ x 3.5˝ 1 each 0.7 $25 $35PACKED: One per box, each hinge poly-bagged with fasteners. Supplied with #10 x 1˝ Flat Head-Phillips wood screws.NOTE: NON-REMOVABLE PINS (NRP) NOT AVAILABLE on radius corner hinges.1140 4˝ x 4˝ – 5 ⁄ 8˝ Radius Corner1140030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.1140.xxx.I 5⁄8˝ Radius Corner Hinge – 4˝ x 4˝ 1 each 0.8 $28 $38PACKED: One per box, each hinge poly-bagged with fasteners. Supplied with #10 x 1˝ Flat Head-Phillips wood screws.NOTE: NON-REMOVABLE PINS (NRP) NOT AVAILABLE on radius corner hinges.1435 3.5˝ x 3.5˝ – ¼˝ Radius Corner1435030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.1435.xxx.I ¼˝ Radius Corner Hinge – 3.5˝ x 3.5˝ 1 each 0.7 $25 $35PACKED: One per box, each hinge poly-bagged with fasteners. Supplied with #10 x 1˝ Flat Head-Phillips wood screws.NOTE: NON-REMOVABLE PINS (NRP) NOT AVAILABLE on radius corner hinges.1440 4˝ x 4˝ – ¼˝ Radius Corner1440030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.1440.xxx.I ¼˝ Radius Corner Hinge – 4˝ x 4˝ 1 each 0.8 $28 $38PACKED: One per box, each hinge poly-bagged with fasteners. Supplied with #10 x 1˝ Flat Head-Phillips wood screws.NOTE: NON-REMOVABLE PINS (NRP) NOT AVAILABLE on radius corner hinges.1080, 1081, 1083 Hinge Finials for Radius Corner1080 1081 1083Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2641080.xxx.I* Ball tip – Radius Corner Hinge 2 each $9 $111081.xxx.I* Button tip – Radius Corner Hinge 2 each 9 111083.xxx.I* Steeple tip – Radius Corner Hinge 2 each 9 118490.xxx.RCS Radius Corner Screws 9 each 6 6* To match 402 on hinge, order finial in 102 finish. To match 412 on hinge, order finial in 112 finish.To match 452 finish on hinges, order finials in finish 152.FEATURES: Hinge finials are specially-designed to thread into the top and bottom of the hingebarrel. All finials are completely interchangeable to facilitate stocking and eliminateexcessive inventories. Finials can be purchased separately in sets of 2 only.003055056207

HINGESBALL BEARINGBALL BEARING HINGE SPECIFICATIONSEach hinge is designed with two anti-friction ball bearing assemblies which are nondetachable.The balls inside each chamber are constructed from through-hardened, chromealloy steel material to ensure a longer hinge life. The bearing races are machined from alloysteel which is then hardened and electroplated with a rust-resisting zinc-chromate finish. Ourtesting indicates that although this electroplate finish provides rust protection, when exposedto weather elements of exterior, the steel will eventually rust. The location of each assemblyincreases the vertical load capacity and greatly reduces both vertical and lateral wear of thehinge. As a result, all factors which normally contribute to hinge failure are significantlyreduced. BALL BEARING HINGES ARE RECOMMENDED FOR DOORS EQUIPPED WITHDOOR CLOSERS AND/OR RECEIVING AVERAGE FREQUENCY SERVICE.APPLICATION: STANDARD WEIGHT BALL BEARING hinges are designedfor medium weight doors receiving average traffic in residential and lightcommercial construction. Ball bearing hinges are ALWAYS recommended fordoors equipped with door closers. For further details on applications, consultHinge Chart (p 198).1041 4˝ x 4˝ – Ball Bearing1041Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521041.xxx.I Ball Bearing Hinge – 4˝ x 4˝ 1 each 0.8 $49 $591041.xxx.INRP Ball Bearing Hinge – 4˝ x 4˝ 1 each 0.9 53 63PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with #12 x 1.25˝ Flat Head-Phillips wood screws.1046 4.5˝ x 4.5˝ – Ball Bearing1046Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521046.xxx.I Ball Bearing Hinge – 4.5˝ x 4.5˝ 1 each 1.0 $52 $621046.xxx.INRP Ball Bearing Hinge – 4.5˝ x 4.5˝ 1 each 1.0 56 66PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with #12 x 1.25˝ Flat Head-Phillips wood screws.1051 5˝ x 5˝ – Ball Bearing1051Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 4521051.xxx.I Ball Bearing Hinge – 5˝ x 5˝ 1 each 1.3 $75 $911051.xxx.INRP Ball Bearing Hinge – 5˝ x 5˝ 1 each 1.3 81 97PACKED: One per box, each hinge poly-bagged with fasteners.Supplied with #12 x 1.25˝ Flat Head-Phillips wood screws.1035, 1090 – 1093 Hinge Finials for Ball Bearing1035 1090 1091 1092 1093Item #DescriptionPerBoxWt.030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 2641035.xxx.ITIP Button tip 2 each $12 $141090.xxx.I* Ball tip 2 each 14 161091.xxx.I* Urn tip 2 each 14 161092.xxx.I* Acorn tip 2 each 14 161093.xxx.I* Steeple tip 2 each 14 16* To match 402 on hinge, order finial in 102 finish. To match 412 on hinge, order finial in 112 finish.To match 452 finish on hinges, order finials in finish 152.FEATURES: Hinge finials are specially-designed to thread into the top and bottom of the hingebarrel. All finials are completely interchangeable to facilitate stocking and eliminateexcessive inventories. Finials can be purchased separately in sets of 2 only.003055056

HINGES | SWITCHPLATESCABINET | BEVELED EDGE1025 Cabinet Hinge1025030, 031, 033034, 040, 050060, 102, 112140, 150, 151190, 260, 264003, 055056, 402412, 452PerItem #DescriptionBox Wt.1025.xxx.BAL Cabinet Hinge, Ball tip – 2.5˝ x 2˝ 1 pair 3.0 $44 $54FEATURES: Brass cabinet hinges are available with a Ball decorative finial. FINIALS ARE PERMANENTLY ATTACHED TOHINGE PIN AND HINGE, AND ARE NOT INTERCHANGEABLE.ItemNo.Lengthof JointWidthOpen Thickness KnucklesWood ScrewQuantity / Size1025 2.5˝ (49mm) 2.0˝ (49mm) 0.093˝ (2.35mm) 3 12 – No. 6 x .75˝ Flat Head-Phillips - UndercutSWITCHPLATES4740 – 4742, 4754 GFCI PlatesBeveled Edge4740Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604740.xxx.CD* Triple GFCI – 4.5˝ x 6.5˝ 5 2 $174741.xxx.CD Double GFCI – 4.5˝ x 4.5˝ 5 2.8 134742.xxx.CD Quad GFCI – 4.5˝ x 8.125˝ 1 0.4 224754.xxx.CD Single GFCI – 4.5˝ x 2.75˝ 5 1.7 9*Not Available in 260.4741475447424742, 4750, 4764 Combos & CoversBeveled Edge4743Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604743.xxx.CD GFCI/Single toggle combo – 4.5˝ x 4.5˝ 5 1.4 $134750.xxx.CD* Single box cover – 4.75˝ x 2.75˝ 10 1.7 94764.xxx.CD Cable cover – 4.5˝ x 2.75˝ 5 0.9 9*Not Available in 050, 151 or 260.475047644752, 4771 DuplexBeveled Edge47524771Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604752.xxx.CD Duplex – 4.5˝ x 2.75˝ 5 1.7 $94771.xxx.CD Double duplex – 4.5˝ x 4.5˝ 5 1.1 13209

SWITCHPLATESBEVELED EDGE | COLONIAL4751, 4761, 4770, 4772, 4775 TogglesBeveled Edge4751Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604751.xxx.CD Single toggle – 4.5˝ x 2.75˝ 5 1.7 $ 94761.xxx.CD Double toggle – 4.5˝ x 4.5˝ 5 2.8 134770.xxx.CD Triple toggle – 4.5˝ x 6.5˝ 5 2 174772.xxx.CD Quad toggle – 4.5˝ x 8.125˝ 5 2.6 224775.xxx.CD** Five gang toggle – 4.5˝ x 10˝ 1 0.6 34**Not Available in 050, 112, 151 or 260.476147704772 47754757, 4781 DuplexColonial47574781Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604757.xxx.CD Duplex – 5.125˝ x 3˝ 10 2.9 $134781.xxx.CD Double duplex – 5.125˝ x 5.125˝ 5 2.1 194769 Cable CoverColonialPer 030, 050, 112Item #DescriptionBox Wt. 150, 151, 2604769.xxx.CD Cable cover – 5.125˝ x 3˝ 5 0.7 $1347694756, 4766, 4780, 4782 TogglesColonial47564766Item #DescriptionPerBoxWt.030, 050, 112150, 151, 2604756.xxx.CD Single toggle – 5.125˝ x 3˝ 10 2.9 $134766.xxx.CD Double toggle – 5.125˝ x 5.125˝ 5 4.7 194780.xxx.CD Triple toggle – 5.375˝ x 6.5˝ 5 3.3 254782.xxx.CD* Quad toggle – 5.378˝ x 8.25˝ 5 4.3 34*Not Available in 260.47804782

4785, 4787 Single & Double GFCIColonial47854787Item #DescriptionSWITCHPLATESCOLONIAL | ROPEPerBoxWt.030, 050, 112150, 151, 2604785.xxx.CD* Single GFCI – 5.125˝ x 3˝ 5 2.9 $ 134787.xxx.CD Double GFCI – 5.125˝ x 5.125˝ 10 4.7 19*Not Available in 260.4788, 4780, 4793 TogglesRope47884790Item #DescriptionPerBoxWt.030, 050, 1121504788.xxx.CD Single toggle – 5.375˝ x 3.9375˝ 10 2.4 $154790.xxx.CD Double toggle – 5.9375˝ x 5.9375˝ 5 4 214793.xxx.CD Triple toggle – 5.625˝ x 6.75˝ 5 2.7 2847934780, 4789 DuplexRope47894780Item #DescriptionPerBoxWt.030, 050, 1121504789.xxx.CD Duplex – 5.375˝ x 3.9375˝ 10 2 $154794.xxx.CD Double duplex – 5.9375˝ x 5.9375˝ 5 1.5 214782 Cable CoverRopePer 030, 050, 112Item #DescriptionBox Wt. 1504795.xxx.CD Cable cover – 5.375˝ x 3.9375˝ 5 1 $1547824785, 4787 Single & Double GFCIRope47854787Item #DescriptionPerBoxWt.030, 050, 1121504796.xxx.CD Single GFCI – 5.375˝ x 3.9375˝ 5 1 $154797.xxx.CD Double GFCI – 5.9375˝ x 5.4375˝ 10 3 21211

CABINET KNOBSCRYSTAL4300 – 4302 Crystal Knob4300, 4301, 4302Item #DescriptionStdBoxWt./Box030112, 150, 2604300.xxx Crystal Knob – 1˝ diameter x 1.4˝ projection 10 0.7 $144301.xxx Crystal Knob – 1.19˝ d. x 1.6˝ p. 10 1.1 154302.xxx Crystal Knob – 1.38˝ d. x 1.8˝ p. 10 1.7 16PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4304, 4305 Crystal KnobItem #DescriptionStdBoxWt./Box030112, 150, 2604304.xxx Crystal Knob – 1.19˝ d. x 1.6˝ p. 10 1.2 $154305.xxx Crystal Knob – 1.46˝ d. x 1.8˝ p. 10 1.6 17PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4304, 43054308 Crystal KnobStd Wt./ 030Item #DescriptionBox Box 112, 150, 2604308.xxx Crystal Knob – 1.38˝ d. x 1.3˝ p. 10 1 $22PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.43084317 – 4319 Crystal Knob4317, 4318, 4319Item #DescriptionStdBoxWt./Box030112, 150, 2604317.xxx Crystal Knob – 1˝ d. x 1.4˝ p. 10 0.8 $184318.xxx Crystal Knob – 1.19˝ d. x 1.6˝ p. 10 1.5 224319.xxx Crystal Knob – 1.56˝ d. x 2.0˝ p. 10 2.4 29PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4321, 4322 Satin Crystal KnobItem #DescriptionStdBoxWt./Box030112, 150, 2604321.xxx Satin Crystal Knob – 1.19˝ d. x 1.8˝ p. 10 0.9 $154322.xxx Satin Crystal Knob – 1.38˝ d. x 2.0˝ p. 10 1.6 16PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4321, 43224323 – 4325 Crystal Knob4323, 4324, 4325Item #DescriptionStdBoxWt.030112, 150, 2604323.xxx Crystal Knob – 1.19˝ d. x 1.2˝ p. 10 2.2 $224324.xxx Crystal Knob – 1.38˝ d. x 1.4˝ p. 10 1.3 284325.xxx Crystal Knob – 1.75˝ d. x 1.8˝ p. 10 2.7 34PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.

CABINET KNOBSCRYSTAL | SWAROVSKI® | BRASS4326 – 4328 Crystal Knob4326, 4327, 4328Item #DescriptionStdBoxWt./Box030112, 150, 2604326.xxx Crystal Knob – 1˝ diameter x 1.1˝ projection 10 0.6 $184327.xxx Crystal Knob – 1.38˝ d. x 1.3˝ p. 10 1.3 284328.xxx Crystal Knob – 1.75˝ d. x 1.7˝ p. 10 2.7 34PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4354 Crystal Cone KnobStd Wt./ 030Item #DescriptionBox Box 112, 150, 2604354.xxx Crystal Cone Knob – 1.19˝ d. x 1.3˝ p. 10 1.1 $15PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.43544332, 4334, 4336 Swarovski Crystal Knob4332, 4334, 4336Item #DescriptionStdBoxWt./Box030, 050,* 112,260*4332.xxx.S Swarovski Crystal Knob – 0.75˝ d. x 1.1˝ p. 10 0.6 $354334.xxx.S Swarovski Crystal Knob – 1.19˝ d. x 1.7˝ p. 10 1.7 554336.xxx.S Swarovski Crystal Knob – 1.56˝ d. x 2.1˝ p. 10 3.1 75* 050 & 260 finish only available on 4336.PACKED: In individual poly bags and protective cartons with .75˝ long truss head screws.All bags are coded with product number, description & UPC code.4445 – 4447 Ring Deco Knob4445, 4446, 4447Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644445.xxx.bin Ring Deco Knob – 1˝ d. x .9˝ p. 25 2.9 $114446.xxx.bin Ring Deco Knob – 1.25˝d. x 1.0˝ p. 25 4.9 124447.xxx.bin Ring Deco Knob – 1.5˝ d. x 1.1˝ p. 25 7.5 13NOTE: All knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4453 Severin Fayerman Collection KnobStd Wt./ 030, 112Item #DescriptionBox Box 140, 150, 2604453.xxx.bin Couture Knob - 1.25˝ x 1.13˝ p. 12 3.2 $16NOTE: All knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.44534455 Severin Fayerman Collection KnobStd Wt./ 030, 112Item #DescriptionBox Box 140, 150, 2604455.xxx.bin Couture Knob - 1.06˝ x .88˝ p. 12 1.8 $16NOTE: All knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4455213

CABINET KNOBSBRASS4456 Severin Fayerman Collection KnobStd Wt./ 030, 112Item #DescriptionBox Box 140, 150, 2604456.xxx.bin Couture Knob - 1.32˝ diameter x 1.24˝ projection 12 4.6 $16NOTE: All knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.44564457 – 4459 Melon Knob4457, 4458, 4459Item #DescriptionStdBoxWt./Box030, 050102, 112, 150151, 260, 2644457.xxx.bin Melon Knob – 1˝d. x 1.1˝ p. 25 3.2 $114458.xxx.bin Melon Knob – 1.17˝d. x 1.1˝ p. 25 4.7 124459.xxx.bin Melon Knob – 1.36˝d. x 1.3˝ p. 25 5.8 13NOTE: All knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4490, 4491 Dominion Knob4490, 4491Item #DescriptionStdBoxWt./Box4490.xxx.bin Dominion Knob – 1˝d. x 1.0˝ p. 25 3.34491.xxx.bin Dominion Knob – 1.25˝d. x 1.0˝ p. 25 4.2NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.030, 050, 102112, 140, 150151, 260, 264$74493, 4494 Deco Knob4493, 4494Item #DescriptionStdBoxWt./Box030050, 102, 150151, 260, 2644493.xxx.bin Deco Knob – 1.25˝d. x 1.2˝ p. 25 6.8 $74494.xxx.bin Deco Knob – 1.5˝d. x 1.3˝ p. 25 9.3 9NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4629, 4630 Round Edinburgh Knob4629, 4630Item #DescriptionStdBoxWt./Box030050, 112, 2604629.xxx.bin Round Edinburgh Knob – 1.25˝d. x 1.0˝ p. 25 4.1 $134630.xxx.bin Round Edinburgh Knob – 1.5˝d. x 1.0˝ p. 25 5.6 14NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4631, 4632 Oval Edinburgh KnobItem #DescriptionStdBoxWt./Box030050, 112, 2604631.xxx.bin Oval Edinburgh Knob – 1.25˝ x 1.0˝ p. 25 3 $134632.xxx.bin Oval Edinburgh Knob – 1.5˝ x 1.1˝ p. 25 4.1 14NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4631, 4632

CABINET KNOBSBRASS4635 Couture Collection KnobStd Wt./ 030, 050Item #DescriptionBox Box 112, 150, 2604635.xxx.bin Couture Knob - 1.33˝ diameter x 1.15˝ projection 12 2.7 $16NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.46354636 Couture Collection KnobStd Wt./ 030, 050Item #DescriptionBox Box 112, 150, 2604636.xxx.bin Couture Knob - 1.27˝d. x 1˝ p. 12 2.4 $16NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.46364645, 4646 Rope Knob4645, 4646Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644645.xxx.bin Rope Knob – 1.25˝d. x 1.0˝ p. 25 4 $144646.xxx.bin Rope Knob – 1.5˝d. x 1.2˝ p. 25 6.3 21NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4650, 4655, 4660 Colonial Knob4650, 4655, 46604702, 4704, 4706 – 4709 Ornamental Knob4702, 4704, 4706,4708, 4709Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644650.xxx.bin** Colonial Knob – 1˝d. x .9˝ p. 25 2.5 $7**4655.xxx.bin Colonial Knob – 1.25˝d. x 1.0˝ p. 25 4 74660.xxx.bin Colonial Knob – 1.5˝d. x 1.2˝ p. 25 5.8 11** Not available in 112 & 140NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644702.xxx.bin** Classic Knob – .75˝ d. x .812˝ p. 25 1.8 $6**4704.xxx.bin Classic Knob – 1˝ d. x .937˝ p. 25 3 64706.xxx.bin Classic Knob – 1.25˝ d. x 1.157˝ p. 25 6 74708.xxx.bin Classic Knob – 1.5˝ d. x 1.406˝ p. 25 10.4 134709.xxx.bin† Classic Knob – 1.75˝ d. x 1.820˝ p. 10 8.5 24** Not available in 112 & 140†4709 is furnished with No. 1/4-20 x 1.25˝ long truss head screw.NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4910, 4913, 4939 Oval Knob4910, 4913, 4939Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644910.xxx.bin Oval Knob – 1.125˝d. x .75˝ x 1.1˝ p. 25 2.5 $124913.xxx.bin Oval Knob – 1.375˝d. x 1˝ x 1.4˝ p. 25 6.3 134939.xxx.bin* Oval Knob – 1.625˝d. x 1.5˝ x 1.9˝ p. 20 9.3 24** Not available in 112NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.215

CABINET KNOBS | CABINET PULLSBRASS/CRYSTAL4915 Decorative Oval Knob4915Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644915.xxx.bin Decorative Oval Knob – 1˝ x 1.5˝ x 1.2˝ projection 25 3.9 $12NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4929, 4931, 4932 Ornamental Knob4929, 4931, 4932Item #DescriptionStdBoxWt./Box030, 050102, 112, 140150, 151, 2604929.xxx.bin* Ornamental Knob – 1˝ d. x .937˝ p. 25 2.5 $14*4931.xxx.bin* Ornamental Knob – 1.5˝ d. x 1.093˝ p. 25 5.4 $15*4932.xxx.bin** Ornamental Knob – 2˝ d. x 1.218˝ p. 20 6.7 $21*** Not available in 260** Not available in 112 & 140NOTE: Knobs use 8-32 x 1˝ screws and mount on 3/4˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4960, 4961, 4968 Spherical Knob4960, 4961, 4968Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644960.xxx.bin Spherical Knob – 1˝ d. x 1.312˝ p. 25 4.8 $84961.xxx.bin Spherical Knob – 1.25˝ d. x 1.562˝ p. 25 8.5 $94968.xxx.bin** Spherical Knob – 1.5˝ d. x 1.812˝ p. 20 9.7 $14**** Not available in 112 & 140NOTE: Knobs use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4342 Satin Crystal Pull4342Std Wt./ 030Item #DescriptionBox Box 112, 150, 2604342.xxx Satin Crystal Pull – 3.75˝ CTC x 1.3˝ p. 10 2.4 $23NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4343, 4349 Crystal Pull4343Item #DescriptionStdBoxWt./Box4343.xxx Crystal Pull – 3˝ CTC x 1.4˝ p. 10 2.54349.xxx Crystal Pull – 3˝ CTC x 1.4˝ p. 10 2.4NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.030112, 150, 260$234349

CABINET PULLSBRASS4356, 4357, 4361, 4362, 4366, 4367 Severin Fayerman Collection Pulls4356, 4357Item #DescriptionStdBoxWt./Box030, 112140, 150, 2604356.xxx.bin Severin-A Pull – 3˝ CTC x 1.3˝ projection 12 4.6 $224357.xxx.bin Severin-A Pull – 4˝ CTC x 1.3˝ p. 12 5.4 254361.xxx.bin Severin-B Pull – 3˝ CTC x 1.37˝ p. 12 3.3 224362.xxx.bin Severin-B Pull – 4˝ CTC x 1.45˝ p. 12 4.7 254366.xxx.bin Severin-C Pull – 3˝ CTC x 1.3˝ p. 12 4.6 224367.xxx.bin Severin-C Pull – 4˝ CTC x 1.3˝ p. 12 5.3 25NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4361, 43624366, 43674371, 4372, 4376, 4377 Couture Collection Pulls4371, 4372Item #DescriptionStdBoxWt./Box030, 050112, 150, 2604371.xxx.bin Couture-B Pull – 3˝ CTC x 1.15˝ p. 12 3.7 $224372.xxx.bin Couture-B Pull – 4˝ CTC x 1.15˝ p. 12 4.1 254376.xxx.bin Couture-A Pull – 3˝ CTC x 1.45˝ p. 12 2.7 224377.xxx.bin Couture-A Pull – 4˝ CTC x 1.45˝ p. 12 3.0 25NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4376, 43774423, 4424 Cup Pull4423, 4424Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644423.xxx.bin Cup Pull – 3˝ CTC x 1.2˝ p. 20 4.9 $154424.xxx.bin Cup Pull – 4˝ CTC x 1.2˝ p. 20 5.8 17NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.217

CABINET PULLSBRASS4436 – 4438 Deco Pull4436, 4437, 4438Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644436.xxx.bin Deco Pull – 3˝ CTC x 1.2˝ p. 25 5.2 $144437.xxx.bin Deco Pull – 3.5˝ CTC x 1.2˝ p. 25 5.6 154438.xxx.bin Deco Pull – 4˝ CTC x 1.3˝ p. 20 5.6 16NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4448, 4450, 4496, 4497 Arch Pull4496, 44974448, 4450Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644496.xxx.bin Arch Pull – 3.75˝ CTC x 1.1˝ p. 25 4.6 $114497.xxx.bin Arch Pull – 5˝ CTC x 1.2˝ p. 25 5.9 134448.xxx.bin** Arch Pull – 6˝ CTC x 1.2˝ p. 25 5.3 14**4450.xxx.bin** Arch Pull – 8˝ CTC x 1.3˝ p. 25 7.8 17**** Not available in 112 & 140NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4464 Melon Cup Pull4464Item #DescriptionStdBoxWt./Box030, 050102, 112, 150151, 260, 2644464.xxx.bin Melon Cup Pull – 3˝ CTC x 1.7˝ p. 20 3.1 $17NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4473, 4474 Contour Pull4473, 4474Item #DescriptionStdBoxWt./Box030, 050102, 112, 150151, 260, 2644473.xxx.bin Contour Pull – 3˝ CTC 25 $124474.xxx.bin Contour Pull – 3.75˝ CTC 25 13NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4476, 4775 Spindle Pull4775, 4476Item #DescriptionStdBoxWt./Box030050, 102, 150151, 260, 2644475.xxx.bin Spindle Pull – 2.5˝ CTC 25 4.1 $124476.xxx.bin Spindle Pull – 3.75˝ CTC 25 5.3 14NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4479, 4480 Oval Pull4479, 4480Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644479.xxx.bin Oval Pull – 3˝ CTC 25 3.3 $124480.xxx.bin Oval Pull – 4˝ CTC 25 6.1 14NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.

CABINET PULLSBRASS4487 – 4489 Dominion Pull4487, 4488, 4489Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644487.xxx.bin Dominion Pull – 3˝ CTC 25 4.7 $134488.xxx.bin Dominion Pull – 3.5˝ CTC 25 5.3 144489.xxx.bin Dominion Pull – 4˝ CTC 25 6 15NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4611, 4612 Edinburgh Pull4611, 4612Item #DescriptionStdBoxWt./Box030,112, 150, 2604611.xxx.bin Edinburgh Pull – 3.5˝ CTC 25 6.9 $174612.xxx.bin Edinburgh Pull – 4˝ CTC 25 8 18NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4672, 4674, 4676 Wire Pull4672, 4674, 4676Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644672.xxx.bin Wire Pull – 3˝ CTC 25 3.4 $64674.xxx.bin Wire Pull – 3.5˝ CTC 25 3.574676.xxx.bin Wire Pull – 4˝ CTC 25 4.3NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4962 – 4964 Colonial Pull4962, 4963, 4964Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644962.xxx.bin Colonial Pull – 3˝ CTC 25 3.3 $124963.xxx.bin Colonial Pull – 3.5˝ CTC 25 3.8 134964.xxx.bin Colonial Pull – 4˝ CTC 20 7 214966.xxx.bin** Colonial Pull – 3˝ CTC 25 5.6 124967.xxx.bin** Colonial Pull – 3.5˝ CTC 25 2.6 13** Not available in 112 & 140NOTE: Pulls use 8-32 x 1˝ screws and mount on ¾˝ thick doors/cabinets.PACKED: All bags are coded with product number, description and UPC code.4966, 4967219

CABINET HARDWAREBACK PLATES4613 Round Edinburgh4613Std Wt./ 030Item #DescriptionBox Box 112, 150, 2604613.xxx.bin Round Edinburgh Back Plate – 1.5˝ 25 1.5 $8PACKED: In individual polybags. All bags are coded with product number, description and UPC code.4619 Oval Edinburgh4619Std Wt./ 030Item #DescriptionBox Box 112, 150, 2604619.xxx.bin Oval edinburgh Back Plate – 1.25˝ x 2˝ 25 1.9 $8PACKED: In individual polybags. All bags are coded with product number, description and UPC code.4900 – 4903, 4905 Knob Back49004901Item #DescriptionStdBoxWt./Box030, 050, 102112, 140, 150151, 260, 2644900.xxx.bin* Knob Back Plate – 1.25˝ d. 50 1.3 $6*4901.xxx.bin** Knob Back Plate – 1.375˝ d. 50 2.5 9**4902.xxx.bin Knob Back Plate – 1.5˝ d. 50 3.0 74903.xxx.bin** Knob Back Plate – 1.75˝ d. 50 4.54905.xxx.bin** Knob Back Plate – 1.2˝ x 2˝ 50 0.28*** Not available in 140** Not available in 112 & 140PACKED: In individual polybags. All bags are coded with product number, description and UPC code.4902, 490349054965, 4989 Cabinet Pull Base4965Item #DescriptionStdBoxWt./Box030050, 102, 150151, 260, 2644965.xxx.bin Cabinet Pull Base – .625˝ d. 50 0.2 $34989.xxx.bin Cabinet Pull Base – .625˝ d. 50 0.5 2PACKED: In individual polybags. All bags are coded with product number, description and UPC code.4989

GENERAL HARDWAREAPPLIANCE PULLS4358 – 4360, 4363 – 4365, 4368 – 4370Severin Fayerman Collection Appliance Pulls4358, 4359, 43601˝FaceWidthItem #DescriptionStdBoxWt./Box030, 112140, 150, 2604358.xxx Appliance Pull - 8˝ CTC 4 5.2 $854359.xxx Appliance Pull - 12˝ CTC 4 7.6 1354360.xxx Appliance Pull - 18˝ CTC 4 10.4 185NOTE: Appliance pulls use 10 -24 X 1.3˝ screws and mount on doors between .75˝ to 1˝ thick.PACKED: One pull and screw pack in a box, and coded with product number, description and UPC code.0.6˝ SqMount CTC1.8˝DimensionsMountCTCFaceWidth4358 8˝ 9.21˝4359 12˝ 13.21˝4360 18˝ 19.21˝Item #DescriptionStdBoxWt./Box030, 112140, 150, 2604363, 4364, 4365FaceHeightFaceWidth4363.xxx Appliance Pull - 8˝ CTC 4 3.9 $854364.xxx Appliance Pull - 12˝ CTC 4 5.1 1354365.xxx Appliance Pull - 18˝ CTC 4 10.3 185NOTE: Appliance pulls use 10 -24 X 1.3˝ screws and mount on doors between .75˝ to 1˝ thick.PACKED: One pull and screw pack in a box, and coded with product number, description and UPC code.MountWidthMount CTC2.04˝Mount Face FaceDimensions CTC Width Height4363 8˝ 8.9˝ 0.9˝4364 12˝ 12.9˝ 0.9˝4365 18˝ 19.1˝ 1.07˝Item #DescriptionStdBoxWt./Box030, 112140, 150, 260FaceWidth4368.xxx Appliance Pull - 8˝ CTC 4 4.2 $854369.xxx Appliance Pull - 12˝ CTC 4 5.9 1354370.xxx Appliance Pull - 18˝ CTC 4 8.7 1854368, 4369, 43700.96˝NOTE: Appliance pulls use 10 -24 X 1.3˝ screws and mount on doors between .75˝ to 1˝ thick.PACKED: One pull and screw pack in a box, and coded with product number, description and UPC code.0.58˝Mount CTCDepthDimensionsMountCTC DepthFaceWidth4368 8˝ 1.75˝ 9˝4369 12˝ 1.75˝ 13˝4370 18˝ 1.77˝ 19˝4373 – 4375, 4378 – 4380 Couture Collection Appliance Pulls4373, 4374, 43750.75˝0.75˝FaceWidthMount CTC1.63˝Item #DescriptionStdBoxWt./Box030, 050112, 150, 2604373.xxx Appliance Pull - 8˝ CTC 4 4.4 $854374.xxx Appliance Pull - 12˝ CTC 4 6.1 1354375.xxx Appliance Pull - 18˝ CTC 4 8.5 185NOTE: Appliance pulls use 10 -24 X 1.3˝ screws and mount on doors between .75˝ to 1˝ thick.PACKED: One pull and screw pack in a box, and coded with product number, description and UPC code.DimensionsMountCTCFaceWidth4373 8˝ 9.4˝4374 12˝ 12.8˝4375 18˝ 19.3˝Item #DescriptionStdBoxWt./Box030, 050112, 150, 260FaceWidth4378.xxx Appliance Pull - 8˝ CTC 4 2.8 $854379.xxx Appliance Pull - 12˝ CTC 4 4.0 1354380.xxx Appliance Pull - 18˝ CTC 4 6.4 1854378, 4379, 43800.75˝NOTE: Appliance pulls use 10 -24 X 1.3˝ screws and mount on doors between .75˝ to 1˝ thick.PACKED: One pull and screw pack in a box, and coded with product number, description and UPC code.0.76˝Mount CTC1.76˝DimensionsMountCTCFaceWidth4378 8˝ 8.8˝4379 12˝ 12.8˝4380 18˝ 18.8˝221

INDEXNUMERICALNUMERICAL INDEX PAGExxxx.xxx.MTG1 197xxxx.xxx.MTG2 197xxxx.xxx.MTG3 197xxxx.xxx.MTG5 197xxxx.xxx.MTG8 1970012.xxx 1840014.xxx 1840015.xxx 1840017.xxx 1840050.324 1840052.324 1840102.xxx 1850103.xxx 1850105.xxx 1850106.xxx 1850110.xxx 1850113.xxx 1850116.xxx 1860129.xxx 550155.xxx 1860156.xxx 1860174.xxx 550175.xxx 550176.xxx 550195.xxx 1860250.xxx 1880260.xxx 1880310.xxx.ANGL 1880310.xxx.HDAS 1880310.xxx.MORT 1880310.xxx.SURF 1880310.xxx.UNIV 1880320.xxx.MORT 1880320.xxx.UNIV 1880321.xxx 1890322.xxx 1890324.xxx 1890344.xxx 1890345.xxx 1890346.xxx 1890370.xxx 1890378.xxx 1890379.xxx 1890380.xxx 1890381.xxx 1890382.xxx 1890383.xxx 1890403.xxx 540404.xxx 540405.xxx 540406.xxx 54, 1720407.xxx 540413.xxx 510413.xxx.LTP 510414.xxx 510415.xxx 540416.xxx 540417.022 540418.xxx 510418.xxx.LTP 510419.xxx 510421.xxx 540421S.xxx 540422.xxx 540423.xxx 540423S.xxx 540425.xxx 1910426.xxx 1910430.xxx 1910432.xxx 1910440.xxx 1910452.xxx 1920458.xxx 1920465.xxx 1910470.xxx 1920491.xxx 1920491.xxx.MORT 1920491.xxx.RIM 1920491.xxx.SURF 1920492.xxx 1920493.xxx 1920494.xxx 1930494.xxx.MORT 1930494.xxx.RIM 1930494.xxx.SURF 1930495.xxx 1930496.xxx 1930509.004 500509.004.A 500510.004 500510.004.A 500511.004 500511.004.A 500512.004 500512.004.A 500513.004 500513.004.A 500514.004 500514.004.A 500515.004 500515.004.A 500516.004 500516.004.A 500519.004 500519.004.A 500520.004 500520.004.A 500521.004 500521.004.A 500522.004 500522.004.A 500524.004 500524.004.A 500525.004 500525.004.A 500530.004 500530.004.A 500531.004 500531.004.A 500532.004 500532.004.A 500533.004 500533.004.A 500539.004 500580E.004 670581E.004 670582E.004 670600.xxx.12 1940600.xxx.18 1940600.xxx.24 1940602.xxx 1940603.xxx 1940604.xxx 1940622.xxx 1940626.xxx 1940740.xxx 1930742.xxx 1930781.xxx 1930782.xxx 1930950.xxx 1940951.xxx 1940952.xxx 1941025.xxx.BAL 2091030.xxx.I 2061030.000.PIN 2051035.xxx.I 2061035.xxx.INRP 2061035.xxx.ITIP 206, 2081035.000.PIN 2051040.xxx.I 2061040.xxx.INRP 2061040.000.PIN 2051041.xxx.I 2081041.xxx.INRP 2081045.xxx.I 2061045.xxx.INRP 2061045.000.PIN 2051046.xxx.I 2081046.xxx.INRP 2081051.xxx.I 2081051.xxx.INRP 2081051.000.PIN 2051052.xxx.MS 2051063.xxx.MS 2051080.xxx.I 2071081.xxx.I 2071083.xxx.I 2071090.xxx.I 206, 2081091.xxx.I 206, 2081092.xxx.I 206, 2081093.xxx.I 206, 2081135.xxx.I 2071140.xxx.I 2071327.009 56,651419.xxx.WS 2051435.xxx.I 2071440.xxx.I 2071480.xxx.WS 2052000.xxx.0630 1952000.xxx.0634 1952000.xxx.0830 1952000.xxx.0834 1952001.xxx.0630 1952001.xxx.0634 1952001.xxx.0834 1952282.xxx 1972285.xxx 1972331.xxx 1972335.xxx 1972337.xxx 1972355.xxx 1972357.xxx 1972540.xxx 1982552.xxx 1982553.xxx 1982556.xxx 1982557.xxx 1982560.xxx 1982564.xxx 1982574.xxx 1982575.xxx 1982576.xxx 1982578.xxx 1982584.xxx 1992585.xxx 1992597.xxx 1992598.xxx 1992602.xxx 1992604.xxx 2002608.xxx 2002617.xxx 2002673.xxx 2002674.xxx 2002675.xxx 2012692.xxx 2012693.xxx 2012704.xxx 2014000.xxx 2024005.xxx 2024010.xxx 2024015.xxx 2034041.406 2034045.xxx 2034050.xxx 2034055.xxx 2034057.406 2034100.xxx 2034101.406 2034105.xxx 2034207.xxx 2024209.xxx 2024210.xxx 2024252.xxx 2034273.xxx 2034293.xxx 2034300.xxx 2124301.xxx 2124302.xxx 2124304.xxx 2124305.xxx 2124308.xxx 2124317.xxx 2124318.xxx 2124319.xxx 2124321.xxx 2124322.xxx 2124323.xxx 2124324.xxx 2124325.xxx 2124326.xxx 2134327.xxx 2134328.xxx 2134332.xxx.S 2134334.xxx.S 2134336.xxx.S 2134342.xxx 2164343.xxx 2164349.xxx 2164354.xxx 2134356.xxx.bin 2174357.xxx.bin 2174358.xxx 2214359.xxx 2214360.xxx 2214361.xxx.bin 2174362.xxx.bin 2174363.xxx 2214364.xxx 2214365.xxx 2214366.xxx.bin 2174367.xxx.bin 2174368.xxx 2214369.xxx 2214370.xxx 2214371.xxx.bin 2174372.xxx.bin 2174373.xxx 2214374.xxx 2214375.xxx 2214376.xxx.bin 2174377.xxx.bin 2174378.xxx 2214379.xxx 2214380.xxx 2154423.xxx.bin 2174424.xxx.bin 2174436.xxx.bin 2184437.xxx.bin 2184438.xxx.bin 2184445.xxx.bin 2074446.xxx.bin 2134447.xxx.bin 2134448.xxx.bin 2184450.xxx.bin 2184453.xxx.bin 2134455.xxx.bin 2134456.xxx.bin 2144457.xxx.bin 2144458.xxx.bin 2144459.xxx.bin 2144464.xxx.bin 2184473.xxx.bin 2184474.xxx.bin 2184475.xxx.bin 2184476.xxx.bin 2184479.xxx.bin 2184480.xxx.bin 2184487.xxx.bin 2194488.xxx.bin 2194489.xxx.bin 2194490.xxx.bin 2144491.xxx.bin 2144493.xxx.bin 2144494.xxx.bin 2144496.xxx.bin 2184497.xxx.bin 2184505.xxx 2024507.406 2024510.xxx 2024611.xxx.bin 2194612.xxx.bin 2194613.xxx.bin 2204619.xxx.bin 2204629.xxx.bin 2144630.xxx.bin 2144631.xxx.bin 2144632.xxx.bin 2144635.xxx.bin 2154636.xxx.bin 2154645.xxx.bin 2154646.xxx.bin 2154650.xxx.bin 2154655.xxx.bin 2154660.xxx.bin 2154672.xxx.bin 2194674.xxx.bin 2194676.xxx.bin 2194702.xxx.bin 2154704.xxx.bin 2154706.xxx.bin 2154708.xxx.bin 2154709.xxx.bin 2154740.xxx.CD 2094741.xxx.CD 209

INDEXNUMERICAL4742.xxx.CD 2094743.xxx.CD 2094750.xxx.CD 2094751.xxx.CD 2104752.xxx.CD 2094754.xxx.CD 2094756.xxx.CD 2104757.xxx.CD 2104761.xxx.CD 2104764.xxx.CD 2094766.xxx.CD 2104769.xxx.CD 2104770.xxx.CD 2104771.xxx.CD 2094772.xxx.CD 2104775.xxx.CD 2104780.xxx.CD 2104781.xxx.CD 2104782.xxx.CD 2104785.xxx.CD 2114787.xxx.CD 2114788.xxx.CD 2114789.xxx.CD 2114790.xxx.CD 2114793.xxx.CD 2114794.xxx.CD 2114795.xxx.CD 2114796.xxx.CD 2114797.xxx.CD 2114850.xxx 1864851.xxx 1864852.xxx 1874853.xxx 1874857.xxx 1874858.xxx 1874900.xxx.bin 2204901.xxx.bin 2204902.xxx.bin 2204903.xxx.bin 2204905.xxx.bin 2204910.xxx.bin 2154913.xxx.bin 2154915.xxx.bin 2164929.xxx.bin 2164931.xxx.bin 2164932.xxx.bin 2164939.xxx.bin 2154960.xxx.bin 2164961.xxx.bin 2164962.xxx.bin 2194963.xxx.bin 2194964.xxx.bin 2194965.xxx.bin 2204966.xxx.bin 2194967.xxx.bin 2194968.xxx.bin 2164989.xxx.bin 2205000.xxx.IMR 125000.xxx.MR 125000.xxx.MRPN 125001.xxx.IMR 125001.xxx.MR 125001.xxx.MRPN 125002.xxx 305002.xxx.FD 305002.xxx.I 305002.xxx.IDM 305003.xxx 305003.xxx.FD 305003.xxx.I 305003.xxx.IDM 305004.xxx 315004.xxx.FD 315004.xxx.I 315004.xxx.IDM 315005.xxx.IMR 125005.xxx.MR 125005.xxx.MRPN 125006.xxx 315006.xxx.FD 315006.xxx.I 315006.xxx.IDM 315009.xxx.IMR 125009.xxx.MR 125009.xxx.MRPN 125010.xxx 315010.xxx.FD 315010.xxx.I 315010.xxx.IDM 315011.xxx.IMR 125011.xxx.MR 125011.xxx.MRPN 125013.xxx.IMR 135013.xxx.MR 135013.xxx.MRPN 135015.xxx.FD 415015.xxx.IDM 415015.xxx.IMR 135015.xxx.MR 135015.xxx.MRPN 135015.xxx.PASS 415015.xxx.PRIV 415016.xxx 325016.xxx.FD 325016.xxx.I 325016.xxx.IDM 325016E.xxx.IKC 695016E.xxx.IPS 685016E.xxx.KC 695016E.xxx.PS 685017.xxx 305017.xxx.FD 305017.xxx.I 305017.xxx.IDM 305017E.xxx.IKC 695017E.xxx.IPS 685017E.xxx.KC 695017E.xxx.PS 685019.xxx 325019.xxx.FD 325019.xxx.I 325019.xxx.IDM 325020.xxx.FD 415020.xxx.IDM 415020.xxx.IMR 135020.xxx.MR 135020.xxx.MRPN 135020.xxx.PASS 415020.xxx.PRIV 415021.xxx 325021.xxx.FD 325021.xxx.I 325021.xxx.IDM 325023.xxx.IMR 135023.xxx.MR 135023.xxx.MRPN 135024.xxx.IMR 135024.xxx.MR 135025.xxx.FD 415025.xxx.IDM 415025.xxx.IMR 145025.xxx.MR 145025.xxx.MRPN 145025.xxx.PASS 415025.xxx.PRIV 415027.xxx 325027.xxx.FD 325027.xxx.I 325027.xxx.IDM 325027E.xxx.IKC 695027E.xxx.IPS 685027E.xxx.KC 695027E.xxx.PS 685028.xxx 335028.xxx.FD 335028.xxx.I 335028.xxx.IDM 335030.xxx.IMR 145030.xxx.MR 145030.xxx.MRPN 145031.xxx.IMR 145031.xxx.MR 145031.xxx.MRPN 145032.xxx 315032.xxx.FD 315032.xxx.I 315032.xxx.IDM 315032E.xxx.IKC 695032E.xxx.IPS 685032E.xxx.KC 695032E.xxx.PS 685032S.xxx 415032S.xxx.FD 415032S.xxx.I 415032S.xxx.IDM 415033S.xxx 415033S.xxx.FD 415033S.xxx.I 415033S.xxx.IDM 415034S.xxx 415034S.xxx.FD 415034S.xxx.I 415034S.xxx.IDM 415035.xxx 335035.xxx.FD 335035.xxx.I 335035.xxx.IDM 335038.xxx 335038.xxx.FD 335038.xxx.I 335038.xxx.IDM 335041.xxx.FD 425041.xxx.IDM 425041.xxx.IMR 145041.xxx.MR 145041.xxx.MRPN 145041.xxx.PASS 425041.xxx.PRIV 425042.xxx 345042.xxx.FD 345042.xxx.I 345042.xxx.IDM 345045.xxx.IMR 145045.xxx.MR 145045.xxx.MRPN 145046.xxx 315046.xxx.FD 315046.xxx.I 315046.xxx.IDM 315047.xxx 345047.xxx.FD 345047.xxx.I 345047.xxx.IDM 345048.xxx 305048.xxx.FD 305048.xxx.I 305048.xxx.IDM 305050.xxx.IMR 155050.xxx.MR 155050.xxx.MRPN 155053.xxx 325053.xxx.FD 325053.xxx.I 325053.xxx.IDM 325055.xxx.IMR 155055.xxx.MR 155055.xxx.MRPN 155055S.xxx.IMR 195055S.xxx.MR 195055S.xxx.MRPN 195056.xxx 345056.xxx.FD 345056.xxx.I 345056.xxx.IDM 345056E.xxx.IKC 695056E.xxx.IPS 685056E.xxx.KC 695056E.xxx.PS 685057.xxx.IMR 155057.xxx.MR 155057.xxx.MRPN 155058.xxx 345058.xxx.FD 345058.xxx.I 345058.xxx.IDM 345059.xxx 345059.xxx.FD 345059.xxx.I 345059.xxx.IDM 345060.xxx.IMR 155060.xxx.MR 155060.xxx.MRPN 155061S.xxx.IMR 195061S.xxx.MR 195061S.xxx.MRPN 195062.xxx 325062.xxx.FD 325062.xxx.I 325062.xxx.IDM 325063.xxx.IMR 155063.xxx.MR 155063.xxx.MRPN 155064.xxx.IMR 165064.xxx.MR 165064.xxx.MRPN 165065.xxx.IMR 165065.xxx.MR 165065.xxx.MRPN 165066.xxx.IMR 165066.xxx.MR 165066.xxx.MRPN 165067.xxx.IMR 165067.xxx.MR 165067.xxx.MRPN 165068.xxx.IMR 165068.xxx.MR 165068.xxx.MRPN 165069.xxx.IMR 175069.xxx.MR 175069.xxx.MRPN 175070.xxx 315070.xxx.FD 315070.xxx.I 315070.xxx.IDM 315073.xxx.IMR 175073.xxx.MR 175073.xxx.MRPN 175075.xxx 335075.xxx.FD 335075.xxx.I 335075.xxx.IDM 335076.xxx 335076.xxx.FD 335076.xxx.I 335076.xxx.IDM 335077.004 495077.004.A 495077.xxx.FD 425077.xxx.IDM 425077.xxx.IMR 175077.xxx.MR 175077.xxx.PASS 425077.xxx.PRIV 425078.xxx 335078.xxx.FD 335078.xxx.I 335078.xxx.IDM 335080.xxx.FD 425080.xxx.IDM 425080.xxx.IMR 175080.xxx.MR 175080.xxx.PASS 425080.xxx.PRIV 425081.xxx.A 555082.xxx.A 555084.009.0002 565084.xxx.A 495085.000 565090.020.A 555091.004 495091.004.A 495092.004 495092.004.A 495097.009.N 565098.004.A 495098.004.N 495098.009.N 495099.004 495101.xxx.MR 205101.xxx.MRPN 205101.xxx.RMR(.LMR) 205103.xxx.MR 205103.xxx.MRPN 205103.xxx.RMR(.LMR) 205104.xxx.MR 205104.xxx.MRPN 205104.xxx.RMR(.LMR) 205104E.xxx.MR 665104E.xxx.RMR(.LMR) 665105.xxx.MR 205105.xxx.MRPN 205105.xxx.RMR(.LMR) 205106.xxx.MR 205106.xxx.MRPN 205106.xxx.RMR(.LMR) 20223

INDEXNUMERICAL5107.xxx.MR 215107.xxx.MRPN 215107.xxx.RMR(.LMR) 215107E.xxx.MR 665107E.xxx.RMR(.LMR) 665108.xxx.MR 215108.xxx.MRPN 215108.xxx.RMR(.LMR) 215109.xxx.MR 215109.xxx.MRPN 215109.xxx.RMR(.LMR) 215112.xxx.MR 215112.xxx.MRPN 215112.xxx.RMR(.LMR) 215113.xxx.MR 215113.xxx.MRPN 215113.xxx.RMR(.LMR) 215114.xxx.MR 225114.xxx.MRPN 225114.xxx.RMR(.LMR) 225115.xxx.MR 225115.xxx.MRPN 225115.xxx.RMR(.LMR) 225116.xxx.MR 225116.xxx.MRPN 225116.xxx.RMR(.LMR) 225117.xxx.MR 225117.xxx.MRPN 225117.xxx.RMR(.LMR) 225118.xxx.MR 225118.xxx.MRPN 225118.xxx.RMR(.LMR) 225119.xxx 325119.xxx.I 325121.xxx.MR 235121.xxx.MRPN 235121.xxx.RMR(.LMR) 235122.xxx.MR 235122.xxx.MRPN 235122.xxx.RMR(.LMR) 235122E.xxx.MR 665122E.xxx.RMR(.LMR) 665123.xxx 315123.xxx.I 315125.xxx.MR 235125.xxx.MRPN 235125.xxx.RMR(.LMR) 235127.xxx 335127.xxx.I 335129.xxx 335129.xxx.I 335132.xxx.MR 235132.xxx.MRPN 235132.xxx.RMR(.LMR) 235133S.xxx 415133S.xxx.I 415134.xxx 335134.xxx.I 335135.xxx.MR 235135.xxx.MRPN 235135.xxx.RMR(.LMR) 235137.xxx.MR 245137.xxx.MRPN 245137.xxx.RMR(.LMR) 245138.xxx.MR 245138.xxx.MRPN 245138.xxx.RMR(.LMR) 245139.xxx 315139.xxx.I 315139S.xxx 415139S.xxx.I 415141.xxx.MR 245141.xxx.MRPN 245141.xxx.RMR(.LMR) 245142.xxx 345142.xxx.R(L) 345145.xxx 325145.xxx.I 325146.xxx 315146.xxx.I 315147.xxx 345147.xxx.I 345148.xxx 305148.xxx.I 305149.xxx 315149.xxx.I 315151.xxx 315151.xxx.I 315152.xxx.MR 245152.xxx.MRPN 245152.xxx.RMR(.LMR) 245152E.xxx.MR 665152E.xxx.RMR(.LMR) 665153.xxx 325153.xxx.I 325155.xxx 335155.xxx.I 335156.xxx 335156.xxx.I 335157.xxx 335157.xxx.I 335158.xxx 345158.xxx.I 345159.xxx 345159.xxx.I 345160.xxx 345160.xxx.I 345161.xxx.MR 245161.xxx.MRPN 245161.xxx.RMR(.LMR) 245162.xxx.MR 255162.xxx.MRPN 255162.xxx.RMR(.LMR) 255162E.xxx.MR 675162E.xxx.RMR(.LMR) 675164.xxx.MR 255164.xxx.MRPN 255164.xxx.RMR(.LMR) 255165.xxx.MR 255165.xxx.MRPN 255165.xxx.RMR(.LMR) 255166.xxx.MR 255166.xxx.MRPN 255166.xxx.RMR(.LMR) 255166E.xxx.MR 675166E.xxx.RMR(.LMR) 675168S.xxx.MR 295168S.xxx.MRPN 295168S.xxx.RMR(.LMR) 295170S.xxx.MR 295170S.xxx.MRPN 295170S.xxx.RMR(.LMR) 295172S.xxx.MR 295172S.xxx.MRPN 295172S.xxx.RMR(.LMR) 295173S.xxx.MR 305173S.xxx.MRPN 305173S.xxx.RMR (.LMR) 305174.022 545177S.xxx.MR 305177S.xxx.MRPN 305177S.xxx.RMR (.LMR) 305187.xxx 645190.xxx.MR 255190.xxx.MRPN 255190.xxx.RMR (.LMR) 255190E.xxx.MR 665190E.xxx.RMR (.LMR) 665194.xxx.A 565197.xxx 565198.000.A 565199.000 465205.xxx.ENTR 445205.xxx.FD 445206.xxx.ENTR 445206.xxx.FD 445208.xxx.ENTR 445209.xxx.ENTR 445210.xxx 465210.xxx.ENTR 445210.xxx.FD 445211.xxx.ENTR 445211.xxx.FD 445213.xxx.ENTR 445214.xxx.ENTR 445215.xxx.ENTR 445215.xxx.FD 445216.xxx.ENTR 445216.xxx.FD 445218.xxx.ENTR 445219.xxx.ENTR 445220.xxx.ENTR 445220.xxx.FD 445221.xxx.ENTR 445221.xxx.FD 445223.xxx.ENTR 445224.xxx.ENTR 445225.xxx.ENTR 445225.xxx.FD 445226.xxx.ENTR 445226.xxx.FD 445228.xxx.ENTR 445229.xxx.ENTR 445237.xxx.ENTR 455237.xxx.FD 455237.xxx.LRFD 455237.xxx.RENT(.LENT) 455238.xxx.ENTR 455238.xxx.FD 455238.xxx.LRFD 455238.xxx.RENT(.LENT) 455239.xxx.ENTR 455239.xxx.RENT(.LENT) 455241.xxx.ENTR 455241.xxx.RENT(.LENT) 455245.xxx.FD 455245.xxx.RENT(.LENT) 455246.xxx.FD 455246.xxx.RENT(.LENT) 455248.xxx.RENT(.LENT) 455249.xxx.RENT(.LENT) 455255.xxx.FD 465255.xxx.RENT(.LENT) 465256.xxx.FD 465256.xxx.RENT(.LENT) 465258.xxx.RENT(.LENT) 465259.xxx.RENT(.LENT) 465265.xxx.LRFD 465265.xxx.RENT(.LENT) 465266.xxx.LRFD 465266.xxx.RENT(.LENT) 465268.xxx.RENT(.LENT) 465269.xxx.RENT(.LENT) 465300.xxx.EFLS 485340.xxx 2015397.xxx.15A 1195397.xxx.15B 1195397.xxx.15C 1195397.xxx.15D 1195397.xxx.15E 1195397.xxx.15F 1195397.xxx.15G 1195398.xxx.A 1815398.xxx.B 1815398.xxx.C 1815398.xxx.D 1815398.xxx.G 1815398.xxx.H 1815399.xxx.A 1815399.xxx.B 1815399.xxx.C 1815399.xxx.D 1815399.xxx.G 1815399.xxx.H 1815399.xxx.I 1815399.xxx.J 1815399.xxx.K 1815399.xxx.L 1815399.xxx.M 1815399.xxx.N 1815399.xxx.O 1815440V.xxx.FD 425440V.xxx.MR 265440V.xxx.PASS 425440V.xxx.PRIV 425440V.xxx.RDM(.LDM) 425440V.xxx.RMR(.LMR) 265445V.xxx.FD 425445V.xxx.MR 265445V.xxx.PASS 425445V.xxx.PRIV 425445V.xxx.RDM(.LDM) 425445V.xxx.RMR(.LMR) 265447V.xxx.FD 435447V.xxx.MR 265447V.xxx.PASS 435447V.xxx.PRIV 435447V.xxx.RDM(.LDM) 435447V.xxx.RMR(.LMR) 265452V.xxx.FD 435452V.xxx.MR 265452V.xxx.PASS 435452V.xxx.PRIV 435452V.xxx.RDM(.LDM) 435452V.xxx.RMR(.LMR) 265455V.xxx.FD 435455V.xxx.MR 265455V.xxx.PASS 435455V.xxx.PRIV 435455V.xxx.RDM(.LDM) 435455V.xxx.RMR(.LMR) 265460V.xxx.FD 435460V.xxx.MR 275460V.xxx.PASS 435460V.xxx.PRIV 435460V.xxx.RDM(.LDM) 435460V.xxx.RMR(.LMR) 275465V.xxx.MR 275465V.xxx.RMR(.LMR) 275485V.xxx.FD 435485V.xxx.MR 275485V.xxx.PASS 435485V.xxx.PRIV 435485V.xxx.RDM(.LDM) 435485V.xxx.RMR(.LMR) 275510.000 485510.xxx(.ASA, .FLS) 475510.xxx.0030 465510.xxx.ASTR 485510.xxx.E158 485510.xxx.E178 485510.xxx.E214 485510.xxx.FSTR 485510.xxx.P(.ASA, .FLS) 475510.xxx.TSTR 485512.xxx(.ASA) 475512.xxx.P(.ASA) 475513.xxx(.ASA, .FLS) 475513.xxx.0030 465513.xxx.P(.ASA, .FLS) 475515.xxx(.ASA) 475515.xxx.P(.ASA) 475520.xxx(.ASA, .FLS) 475520.xxx.P(.ASA, .FLS) 475522.xxx(.ASA) 475522.xxx.P(.ASA) 475523.xxx(.ASA, .FLS) 475523.xxx.P(.ASA, .FLS) 475525.xxx(.ASA) 475525.xxx.P(.ASA) 475528.xxx.R(.L) 485600.xxx.R(.L,.RR,.LR) 1695600.xxx.RFD(.LFD) 1695601.xxx 1715602.xxx.R(.L,.RR,.LR) 1695602.xxx.RFD(.LFD) 1695603.xxx 1715604.xxx.R(.L,.RR,.LR) 1695604.xxx.RFD(.LFD) 1695606.xxx 1715608.xxx.RSKC(.LSKC) 1715626.xxx.RSKC(.LSKC) 1715628.xxx 1715629.xxx.RSKC(.LSKC) 1715630.xxx.R(.L,.RR,.LR) 1695630.xxx.RFD(.LFD) 1695631.xxx 1715632.xxx.R(.L,.RR,.LR) 1695633.xxx 1715634.xxx.R(.L,.RR,.LR) 1695634.xxx.RFD(.LFD) 1695636.xxx.R(.L,.RR,.LR) 1705636.xxx.RFD(.LFD) 1705639.xxx.R(.L,.RR,.LR) 1705639.xxx.RFD(.LFD) 1705641.xxx 1715642.xxx 1715643.xxx 1715644.xxx.R(.L,.RR,.LR) 1705644.xxx.RFD(.LFD) 1705671.xxx 1715672.xxx 1715673.xxx 1715674.xxx.RSKC(.LSKC) 1715701.xxx.R(.L,.RR,.LR) 169

INDEXNUMERICAL5701.xxx.RFD(.LFD) 1695702.xxx.R(.L,.RR,.LR) 1695702.xxx.RFD(.LFD) 1695704.xxx.R(.L,.RR,.LR) 1695704.xxx.RFD(.LFD) 1695720.xxx.R(.L,.RR,.LR) 1705720.xxx.RFD(.LFD) 1705722.xxx 1705723.xxx.R(.L) 1705753.xxx 1725754.xxx 1725755.xxx 1725758.xxx 1725970.xxx.BPG2 1445970.xxx.CHG 1455970.xxx.FDG 1445971.xxx.BPG2 1445971.xxx.FDG 1445975.xxx.BPG2 1445975.xxx.CHG 1455975.xxx.FDG 1445976.xxx.BPG2 1455976.xxx.FDG 1455980.xxx.BPG2 1455980.xxx.CHG 1455980.xxx.FDG 1456001.000 1316001.xxx.Suffix 1226010.xxx.0004 1316010.xxx.Suffix 1276020.xxx.Suffix 1226021.xxx.0004 1316021.xxx.Suffix 1226025.xxx.Suffix 1226037.xxx.XXXX 1306038.xxx.XXXX 1306039.xxx.XXXX 1306040.xxx 1306040.xxx.R(.L) 1306041.xxx 1306041.xxx.R(.L) 1306042.xxx 1316043.xxx 1306043.xxx.R(.L) 1306051.xxx.Suffix 1296053.xxx.Suffix 1296055.xxx.Suffix 1276060.xxx.0004 1316060.xxx.Suffix 1276065.xxx.0004 1316065.xxx.Suffix 1276066.xxx.Suffix 1226070.xxx.Suffix 1276075.xxx.Suffix 1226077.xxx.Suffix 1226080.xxx.0004 1316091.xxx.0004 1316100.xxx.Suffix 1276110.xxx.0004 1316110.xxx.Suffix 1276130.xxx.Suffix 1276150.xxx 1286150.xxx.0004 1316150.xxx.0084 1316160.xxx 1286301.xxx.0004 1316301.xxx.0084 1316301.xxx.Suffix 1226310.xxx.0004 1316310.xxx.0084 1316310.xxx.Suffix 1226315.xxx.Suffix 1276318.xxx.0004 1316318.xxx.0084 1316318.xxx.Suffix 1276320.xxx.Suffix 1226321.xxx.Suffix 1226325.xxx.Suffix 1226338.xxx.XXXX 1306339.xxx.XXXX 1306340.xxx 1306340.xxx.R(.L) 1306341.xxx 1306341.xxx.R(.L) 1306375.xxx.Suffix 1226401.xxx.ENTR 776401.xxx.FD 776401.xxx.LENT 776401.xxx.LFD 776401.xxx.RENT 776401.xxx.RFD 776402.xxx.ENTR 786402.xxx.FD 786402.xxx.RENT(.LENT) 786402.xxx.RFD(.LFD) 786403.xxx.ENTR 796403.xxx.FD 796403.xxx.RENT(.LENT) 796403.xxx.RFD(.LFD) 796420.xxx.ENTR 726420.xxx.FD 726426.xxx.LENT 776426.xxx.LFD 776426.xxx.RENT 776426.xxx.RFD 776501.000.A 1186501.000.B 1186501.000.C 1186501.000.D 1186501.000.E 1186501.000.F 1186501.xxx.15A 1196501.xxx.15B 1196501.xxx.15C 1196501.xxx.15D 1196501.xxx.15E 1196501.xxx.15G 1196501.xxx.15H 1196501.xxx.15I 1196501.xxx.15J 1196501.xxx.15L 1196501.xxx.15M 1196501.xxx.15N 1196501.xxx.15O 1196502.009 556502.xxx.KCOS(KCIS) 1126502.xxx.KEOS(KEIS) 1126502.xxx.KNOS(KNIS) 1126502.xxx.KTOS(KTIS) 1126503.xxx.KCOS(KCIS) 956503.xxx.KEOS(KEIS) 956503.xxx.KNOS(KNIS) 956503.xxx.KTOS(KTIS) 956505.xxx.RKC(LKC) 916505.xxx.RKE(LKE) 916505.xxx.RKN(LKN) 916505.xxx.RKT(LKT) 916506.xxx.KCOS(KCIS) 1136506.xxx.KEOS(KEIS) 1136506.xxx.KNOS(KNIS) 1136506.xxx.KP 1136506.xxx.KTOS(KTIS) 1136508.xxx.KC 986508.xxx.KN 986508.xxx.KP 986513.xxx.KC 99, 1146513.xxx.KE 99, 1146513.xxx.KN 99, 1146513.xxx.KP 996513.xxx.KT 99, 1146514.xxx.KT 1146515.xxx.DBLC 826515.xxx.ENFD 826515.xxx.ENTR 826515.xxx.FD 826515.xxx.KC 826515.xxx.KE 826515.xxx.KN 826515.xxx.KT 826516.xxx.DBLC 826516.xxx.ENTR 826516.xxx.FD 826520.xxx.DBLC 836520.xxx.ENFD 836520.xxx.ENTR 836520.xxx.FD 836520.xxx.KC 836520.xxx.KE 836520.xxx.KN 836520.xxx.KT 836525.xxx.KC 846525.xxx.KE 846525.xxx.KN 846525.xxx.KT 846526.xxx.ENFD 846526.xxx.RDBL(LDBL) 846526.xxx.RENT(LENT) 846526.xxx.RFD(LFD) 846540.xxx.DBLC 856540.xxx.ENFD 856540.xxx.ENTR 856540.xxx.FD 856541.xxx.DBLC 866541.xxx.ENFD 866541.xxx.ENTR 866541.xxx.FD 866542.xxx.DBLC 876542.xxx.ENFD 876542.xxx.ENTR 876542.xxx.FD 876543.xxx.DBLC 886543.xxx.ENFD 886543.xxx.ENTR 886543.xxx.FD 886544.xxx.ENFD 896544.xxx.RDBL(LDBL) 896544.xxx.RENT(LENT) 896544.xxx.RFD(LFD) 896546.xxx.DBLC 946546.xxx.ENFD 946546.xxx.ENTR 946546.xxx.FD 946547.xxx.DBLC 906547.xxx.DM 906547.xxx.ENFD 906547.xxx.ENTR 906547.xxx.FD 906548.xxx.DBLC 956548.xxx.ENFD 956548.xxx.ENTR 956548.xxx.FD 956549.xxx.ENFD 916549.xxx.RDBL(LDBL) 916549.xxx.RENT(LENT) 916549.xxx.RFD(LFD) 916550.xxx.ENFD 916550.xxx.RDBL(LDBL) 916550.xxx.RENT(LENT) 916550.xxx.RFD(LFD) 916551.xxx.DBLC 986551.xxx.ENFD 986551.xxx.ENTR 986551.xxx.FD 986552.xxx.DBLC 926552.xxx.DM 926552.xxx.ENFD 926552.xxx.ENTR 926552.xxx.FD 926553.xxx 1126553.xxx.BB30 1126553.xxx.BB75 1126553.xxx.BBFD 1126553.xxx.DM 1126554.xxx.DBLC 1116554.xxx.DM 1116554.xxx.ENFD 1116554.xxx.ENTR 1116554.xxx.FD 1116555.xxx.DBLC 886555.xxx.ENFD 886555.xxx.ENTR 886555.xxx.FD 886557.xxx.DBLC 936557.xxx.ENFD 936557.xxx.ENTR 936557.xxx.FD 936560.xxx.DBLC 946560.xxx.ENFD 946560.xxx.ENTR 946560.xxx.FD 946562.xxx.DBLC 956562.xxx.ENFD 956562.xxx.ENTR 956562.xxx.FD 956563.xxx.DBLC 966563.xxx.ENFD 966563.xxx.ENTR 966563.xxx.FD 966565.xxx.ENFD 976565.xxx.RDBL 976565.xxx.RENT(.LENT) 976565.xxx.RFD 976567.xxx.DBLC 986567.xxx.ENFD 986567.xxx.ENTR 986567.xxx.FD 986570.xxx.DBLC 996570.xxx.ENFD 996570.xxx.ENTR 996570.xxx.FD 996571.xxx.DBLC 1006571.xxx.ENFD 1006571.xxx.ENTR 1006571.xxx.FD 1006573.xxx.DBLC 1016573.xxx.ENFD 1016573.xxx.ENTR 1016573.xxx.FD 1016599.xxx.THKA 1186599.xxx.THKB 1186599.xxx.THKC 1186599.xxx.THKD 1186599.xxx.THKE 1186599.xxx.THKF 1186599.xxx.THKG 1186599.xxx.THKH 1186599.xxx.THKI 1186599.xxx.THKJ 1186599.xxx.THKK 1186599.xxx.THKL 1186602.xxx 986602.xxx.DM 986603.xxx 856603.xxx.DM 856604.xxx 1006604.xxx.DM 1006605.xxx 876605.xxx.BB30 876605.xxx.BB75 876605.xxx.BBFD 876605.xxx.DM 876606.xxx 936606.xxx.DM 936608.xxx 956608.xxx.BB30 956608.xxx.BB75 956608.xxx.BBFD 956608.xxx.DM 956614.xxx 966614.xxx.DM 966619.xxx 996619.xxx.BB30 996619.xxx.BB75 996619.xxx.DM 996620.xxx 1146620.xxx.BB30 1146620.xxx.BB75 1146620.xxx.BBFD 1146620.xxx.DM 1146621.xxx 946621.xxx.BB30 946621.xxx.BB75 946621.xxx.BBFD 946621.xxx.DM 946622.xxx 896622.xxx.BB30 896622.xxx.BB75 896622.xxx.BBFD 896622.xxx.DM 896624.xxx 1086624.xxx.BB30 1086624.xxx.BB75 1086624.xxx.BBFD 1086624.xxx.DM 1086627.xxx 1106627.xxx.BB30 1106627.xxx.BB75 1106627.xxx.BBFD 1106627.xxx.DM 1106628.xxx 91, 1016628.xxx.BB30 916628.xxx.BB75 916628.xxx.BBFD 916628.xxx.DM 91, 1016634.xxx 97225

INDEXNUMERICAL6634.xxx.DM 976635.xxx 886635.xxx.BB30 886635.xxx.BB75 886635.xxx.BBFD 886635.xxx.DM 886638.xxx 826638.xxx.DM 826639.xxx 826639.xxx.DM 826640.xxx 836640.xxx.DM 836641.xxx 1066641.xxx.BB30 1066641.xxx.BB75 1066641.xxx.BBFD 1066641.xxx.DM 1066642.xxx.KC 976642.xxx.KE 976642.xxx.KN 976642.xxx.KT 976643.xxx 846643.xxx.DM 846652.xxx 1096652.xxx.BB30 1096652.xxx.BB75 1096652.xxx.BBFD 1096652.xxx.DM 1096690.xxx 1156690.xxx.BB75 1156690.xxx.BBFD 1156690.xxx.DM 1156701.xxx 546703.xxx 546707.009 1426709.xxx.KC 1156709.xxx.KE 1156709.xxx.KN 1156709.xxx.KT 1156714.xxx.KC 1066714.xxx.KE 1066714.xxx.KN 1066714.xxx.KT 1066720.xxx 536721.xxx 536722.xxx 536724.xxx 536725.xxx 536727.xxx 536728.xxx 526729.xxx 536732.xxx 526733.xxx 526733S.xxx 526734.xxx 526735.xxx 536735S.xxx 536737.xxx 1356738.xxx 1356738S.xxx 1356739.xxx 1356743.xxx 1356743S.xxx 1356748.xxx.A 496749.xxx.A 496750.xxx 526751.xxx 526754.xxx 1356755.xxx 135, 1726755.xxx.001 135, 1726755.xxx.002 135, 1726755.xxx.003 135, 1726756.xxx 526757.xxx 1356760.xxx 526760S.xxx 526761.xxx 1356762.xxx 526763.xxx.KC 85, 966763.xxx.KE 85, 966763.xxx.KN 85, 966763.xxx.KT 85, 966764.xxx 526765.xxx.KC 986765.xxx.KE 986765.xxx.KN 986765.xxx.KT 986767.xxx.KC 926767.xxx.KE 926767.xxx.KN 926767.xxx.KP 926767.xxx.KT 926768.xxx 1356774.xxx.KC 936774.xxx.KE 936774.xxx.KN 936774.xxx.KT 936789.xxx.KC 1096789.xxx.KE 1096789.xxx.KN 1096789.xxx.KP 1096789.xxx.KT 1096790.xxx.KC 1086790.xxx.KE 1086790.xxx.KN 1086790.xxx.KP 1086790.xxx.KT 1086791.xxx.KC 896791.xxx.KE 896791.xxx.KN 896791.xxx.KT 896793.xxx.KC 906793.xxx.KE 906793.xxx.KN 906793.xxx.KP 906793.xxx.KT 906794.xxx.KC 1006794.xxx.KE 1006794.xxx.KN 1006794.xxx.KT 1006795.xxx.KC 946795.xxx.KE 946795.xxx.KN 946795.xxx.KT 946796.xxx.KC 876796.xxx.KE 876796.xxx.KN 876796.xxx.KP 876796.xxx.KT 876797.xxx.KC 886797.xxx.KE 886797.xxx.KN 886797.xxx.KP 886797.xxx.KT 886798.xxx.KC 1016798.xxx.KE 1016798.xxx.KN 1016798.xxx.KP 1016798.xxx.KT 1016800.xxx.0004 1316800.xxx.0084 1316800.xxx.Suffix 1216802.xxx.Suffix 1216810.xxx.0004 1316810.xxx.0084 1316810.xxx.Suffix 1226812.xxx.Suffix 1226830.xxx.Suffix 1226832.xxx.Suffix 1226845.xxx.Suffix 1276847.xxx.Suffix 1276850.xxx 1286855.xxx.0004 1316855.xxx.0084 1316855.xxx.Suffix 1276857.xxx.Suffix 1276860.xxx 1286897.xxx 1316922.xxx.DBLC 1026922.xxx.ENFD 1026922.xxx.ENTR 1026922.xxx.FD 1026922.xxx.RDM(LDM) 1026931.xxx.ENFD 1036931.xxx.RDBL(LDBL) 1036931.xxx.RENT(LENT) 1036931.xxx.RFD(LFD) 1036933.xxx.DBLC 1076933.xxx.ENFD 1076933.xxx.ENTR 1076933.xxx.FD 1076933.xxx.RDM(LDM) 1076938.xxx.DBLC 1046938.xxx.ENFD 1046938.xxx.ENTR 1046938.xxx.FD 1046938.xxx.RDM(LDM) 1046939.xxx.DBLC 1106939.xxx.ENFD 1106939.xxx.ENTR 1106939.xxx.FD 1106939.xxx.RDM(LDM) 1106940.xxx.DBLC 1036940.xxx.ENTR 1036940.xxx.FD 1036940.xxx.RDM(LDM) 1036942.xxx.DBLC 1056942.xxx.ENFD 1056942.xxx.ENTR 1056942.xxx.FD 1056942.xxx.RDM(LDM) 1056944.xxx.DBLC 1066944.xxx.ENFD 1066944.xxx.ENTR 1066944.xxx.FD 1066948.xxx.ENFD 1076948.xxx.RDBL(LDBL) 1076948.xxx.RENT(LENT) 1076948.xxx.RFD(LFD) 1076950.xxx.ENFD 1086950.xxx.RDBL(LDBL) 1086950.xxx.RENT(LENT) 1086950.xxx.RFD(LFD) 1086951.xxx.DBLC 896951.xxx.ENFD 896951.xxx.ENTR 896951.xxx.FD 896952.xxx.ENFD 1096952.xxx.RDBL(LDBL) 1096952.xxx.RENT(LENT) 1096952.xxx.RFD(LFD) 1096953.xxx.R(L) 1036953.xxx.RDM(LDM) 1036956.xxx 1076956.xxx.DM 1076961.xxx.DBLC 1086961.xxx.DM 1086961.xxx.ENFD 1086961.xxx.ENTR 1086961.xxx.FD 1086962.xxx.DBLC 1096962.xxx.DM 1096962.xxx.ENFD 1096962.xxx.ENTR 1096962.xxx.FD 1096963.xxx.ENFD 1106963.xxx.RDBL(LDBL) 1106963.xxx.RENT(LENT) 1106963.xxx.RFD(LFD) 1106966.xxx.ENFD 1126966.xxx.RDBL(LDBL) 1126966.xxx.RENT(LENT) 1126966.xxx.RFD(LFD) 1126973.xxx.DBLC 1136973.xxx.ENFD 1136973.xxx.ENTR 1136973.xxx.FD 1136973.xxx.RDM(LDM) 1136974.xxx.DBLC 1126974.xxx.ENFD 1126974.xxx.ENTR 1126974.xxx.FD 1126974.xxx.RDM(LDM) 1126975.xxx 866975.xxx.DM 866975.xxx.KC 866975.xxx.KE 866975.xxx.KN 866975.xxx.KP 866975.xxx.KT 866976.xxx.ENFD 1146976.xxx.RDBL(LDBL) 1146976.xxx.RENT(LENT) 1146976.xxx.RFD(LFD) 1146980.xxx.KC 1026980.xxx.KE 1026980.xxx.KN 1026980.xxx.KT 1026986.xxx.KC 1056986.xxx.KE 1056986.xxx.KN 1056986.xxx.KT 1056988.xxx.KC 1036988.xxx.KE 1036988.xxx.KN 1036988.xxx.KT 1036991.xxx.KC 1106991.xxx.KE 1106991.xxx.KN 1106991.xxx.KP 1106991.xxx.KT 1106993.xxx.KC 1076993.xxx.KE 1076993.xxx.KN 1076993.xxx.KT 1076996.xxx.KC 1046996.xxx.KE 1046996.xxx.KN 1046996.xxx.KT 1046999.xxx.ENFD 1156999.xxx.RDBL(LDBL) 1156999.xxx.RENT(LENT) 1156999.xxx.RFD(LFD) 1158000.849.STR3 1828000.xxx.RSTR 1828000.xxx.STR 1828011.028.0025 1428011.039.0023 1428011.039.0027 1428011.109.0022 1428011.xxx 1778011.xxx.0020 1828011.xxx.0021 1828011.xxx.0031 1828011.xxx.KD12 1828021.xxx 1778030.xxx.0003 1828030.xxx.0005 1828030.xxx.0510 1828031.xxx 1778031.xxx.KD12 1828031.xxx.KD22 1828031.xxx.SH18 1828031.xxx.TP11 1828040.xxx.0004 1828040.xxx.0006 1828040.xxx.0510 1828041.xxx 1778052.xxx.00045 1828053.028.TP1 1428053.028.TP2 1428053.028.TP3 1428053.028.TP4 1428053.xxx.TP115 1828053.xxx.TP215 1828053.xxx.TP325 1828053.xxx.TP425 1828053.xxx.TP525 1828080.xxx 1838090.xxx 1838097.xxx 1838098.xxx.DC03 1838098.xxx.TP03 1838105.xxx 1408105.xxx.7TOP 1418105.xxx.8TOP 1418105.xxx.GD 1418105.xxx.R510/L510 1418105.xxx.R7LK(L7LK) 1418105.xxx.R8LK(L8LK) 1418105.xxx.REPL 1418106, 8107.xxx 1418106.xxx.CVR 1418106.xxx.E24 1418106.xxx.E48 1418107.xxx.CVR 1418107.xxx.E24 1418107.xxx.E48 1418201.xxx.DB 1838208.xxx.DB 1838212.xxx 1788213.xxx 1788231.xxx 1788231.xxx.PAT 1788232.xxx 178

INDEXNUMERICAL8237.xxx 1788237.xxx.0510 1828238.xxx 1788241.xxx 1778241.xxx.PAT 1778242.xxx 1778244.xxx 1768244.xxx.PAT 1768244S.xxx 1768244S.xxx.PAT 1768252.xxx 1798252.xxx.AC1 1758253.xxx 1798254.xxx 1798255.xxx 1798285.xxx 1798285.xxx.AC1 1758286.xxx 1798297.xxx 1838300.009.0065 1348300.009.0066 1348300.109.005 1348300.509.004 1368300.509.AR 1348300.509.EMHT 1348300.509.STD 1348300.xxx 1358313.329.TPH1 134, 1428313.329.TPH2 134, 1428313.509.008 137, 1428313.509.009 137, 1428314.xxx 135, 1728320.009.101 1428320.009.102 1428320.009.103 1428320.009.202 1428320.009.203 1428320.009.204 1428320.009.205 1428320.009.206 1428320.009.207 1428320.009.208 1428320.009.209 1428320.152.300 1428320.152.301 1428320.152.302 1428320.152.303 1428320.152.304 1428320.152.305 1428320.152.306 1428320.152.307 1428320.152.308 1428320.152.309 1428320.152.401 1428321.xxx 1338321.xxx.DBL 1338322.xxx 1338322.xxx.DBL 1338323.xxx 1338323.xxx.DBL 1338324.xxx 1338324.xxx.DBL 1338325.xxx 1338325.xxx.DBL 1338326.xxx 1338326.xxx.DBL 1338327.xxx 1338327.xxx.DBL 1338328.xxx 1338328.xxx.DBL 1338329.xxx 1338329.xxx.DBL 1338330.xxx 1338330.xxx.DBL 1338333.009.007 1428333.009.010 1428333.xxx 1378333.xxx.H 1378440.xxx.001 1338440.xxx.002 1338440.xxx.003 1338440.xxx.004 1338440.xxx.005 1338440.xxx.006 1338441.xxx 1348442.xxx 1348443.xxx 1348444.xxx 1348471.000 1428472.000 1428472.000.001 1428472.000.002 1428472.000.003 1428472.000.004 1428472.000.006 1428474.000 568474.000.000 1428475.000.001 1428480.000 56, 57, 1428481.000.001 56, 1428484.000 1428488E.000.A 658488E.000.B 658488E.000.C 658488E.000.D 658490.xxx.RCS 2078498.000 1348530.xxx.Suffix 1268535.xxx.Suffix 1268540.xxx.Suffix 1268545.xxx.Suffix 1268555.xxx 1288560.xxx 1288570.xxx 1438570.xxx.ADAP 1438571.xxx 1438575.xxx 1438580.xxx 1438581.xxx 1438585.xxx 1438586.xxx 1438590.xxx 1438591.xxx 1438595.xxx 1438596.xxx 1439935.999 1429940.000.A 14285305.xxx.DBLC 6985305.xxx.ENTR 6985305.xxx.FD 6985305.xxx.RDBL(.LDBL) 6985305.xxx.RENT(.LENT) 6985305.xxx.RFD(.LFD) 6985315.xxx.DBLC 7085315.xxx.ENTR 7085315.xxx.FD 7085315.xxx.RDBL(.LDBL) 7085315.xxx.RENT(.LENT) 7085315.xxx.RFD(.LFD) 7085320.xxx.DBLC 6985320.xxx.ENTR 6985320.xxx.FD 6985320.xxx.RDBL(.LDBL) 6985320.xxx.RENT(.LENT) 6985320.xxx.RFD(.LFD) 6985325.xxx.DBLC 7185325.xxx.ENTR 7185325.xxx.FD 7185325.xxx.RDBL(.LDBL) 7185325.xxx.RENT(.LENT) 7185325.xxx.RFD(.LFD) 7185327.xxx.DBLC 7185327.xxx.ENTR 7185327.xxx.FD 7185327.xxx.RDBL(.LDBL) 7185327.xxx.RENT(.LENT) 7185327.xxx.RFD(.LFD) 7185335.xxx.DBLC 7085335.xxx.ENTR 7085335.xxx.FD 7085337.xxx.ENTR 7685337.xxx.FD 7685337.xxx.RENT(.LENT) 7685337.xxx.RFD(.LFD) 7685340.xxx.ENTR 7685340.xxx.FD 7685340.xxx.RENT(.LENT) 7685340.xxx.RFD(.LFD) 7685345.xxx.2DC 8185345.xxx.2DCR(.2DCL) 8185345.xxx.2ENT 8185345.xxx.2FD 8185345.xxx.2RFD(.2LFD) 8185345.xxx.2RH(.2LH) 818535.xxx.Suffix 12685350.xxx.ENTR 7385350.xxx.FD 7385350.xxx.RENT(.LENT) 7385350.xxx.RFD(.LFD) 7385352.xxx.ENTR 7985352.xxx.FD 7985352.xxx.RENT(.LENT) 7985352.xxx.RFD(.LFD) 7985353.xxx.ACRH(.ACLH)85354.xxx.ENTR 7885354.xxx.FD 7885354.xxx.RENT(.LENT) 7885354.xxx.RFD(.LFD) 7885355.xxx.ENTR 7485355.xxx.FD 7485355.xxx.RENT(.LENT) 7485355.xxx.RFD(.LFD) 7485360.xxx.ENTR 7585360.xxx.FD 7585365.xxx.2DC 8085365.xxx.2DCR(.2DCL) 8085365.xxx.2ENT 8085365.xxx.2FD 8085365.xxx.2RFD(.2LFD) 8085365.xxx.2RH(.2LH) 8085370.xxx.DBLC 7385370.xxx.ENTR 7385370.xxx.FD 7385375.xxx.DBLC 7485375.xxx.ENTR 7485375.xxx.FD 7485380.xxx.DBLC 7585380.xxx.ENTR 7585380.xxx.FD 7585385.xxx.2DCR(.2DCL) 8185385.xxx.2RFD(.2LFD) 8185385.xxx.2RH(.2LH) 8185386.xxx.ACRH(.ACLH) 17585386.xxx.RDBL(.LDBL) 7285386.xxx.RENT(.LENT) 7285386.xxx.RFD(.LFD) 7285387.xxx.RENT(.LENT) 8085387.xxx.RFD(.LFD) 8090670.xxx.CD 18790671.xxx.CD 18790672.xxx.CD 18790673.xxx.CD 18790674.xxx.CD 18790675.xxx.CD 18790676.xxx.CD 18790677.xxx.CD 18790678.xxx.CD 18790679.xxx.CD 187ACT1 150ACT2 152ACT3 154ACT4 156ACT5 158ACT6 160ACT7 164ACT8 166AIN1 150AIN2 152AIN3 154AIN4 156AIN5 158AIN6 160FD1 150FD2 152FD3 154FD4 156FD5 158FD6 160FD7 164FD8 166FDP1 150FDP2 152FDP3 154FDP4 156FDP5 158FDP6 160FDP7 164FDP8 166FWHAP 153FWHAX 153G6010.xxx.Suffix 124G6055.xxx.Suffix 124G6060.xxx.Suffix 124G6065.xxx.Suffix 124G6075.xxx.Suffix 124G6077.xxx.Suffix 124G6085.xxx.Suffix 124G6090.xxx.Suffix 124G6110.xxx.Suffix 124G6130.xxx.Suffix 124G6140.xxx.Suffix 124G6150.xxx.Suffix 124G6160.xxx.Suffix 124G6310.xxx.Suffix 124G6318.xxx.Suffix 124G6330.xxx.Suffix 124G6340.xxx.Suffix 124G6350.xxx.Suffix 124G6355.xxx.Suffix 124G6360.xxx.Suffix 124G6361.xxx.Suffix 124G6365.xxx.Suffix 124G6375.xxx.Suffix 124G6377.xxx.Suffix 124G6385.xxx.Suffix 124G6390.xxx.Suffix 124K001.xxx.IMR 18K001.xxx.MR 18K002.xxx.IMR 18K002.xxx.MR 18K003.xxx.IMR 18K003.xxx.MR 18K004.xxx.IMR 18K004.xxx.MR 18K005.xxx.IMR 19K005.xxx.MR 19K006.xxx.IMR 19K006.xxx.MR 19KC1 150KC3 154KC4 156KC5 158KC6 160KC7 164KC8 166KCA2 152KCT1 150KCT4 156KCT7 164KCT8 166KNI1 150KNI2 152KNI3 154KNI4 156KNI5 158KNI6 160KNI7 164KNI8 166KNIR1 150KNIR2 152KNIR3 154KNIR4 156KNIR5 158KNIR6 160KNIR7 164KNIR8 166KNO1 150KNO2 152KNO3 154KNO4 156KNO5 158KNO6 160KNO7 164KNO8 166KNOR1 150KNOR2 152KNOR4 156KNOR3 154KNOR5 158KNOR6 160KNOR7 164KNOR8 166KT3 154KT5 158KT6 160227

INDEXNUMERICALKTA2 152L002.xxx.MR 27L002.xxx.RMR(.LMR) 27L004.xxx.MR 27L004.xxx.RMR(.LMR) 27L005.xxx.MR 28L005.xxx.RMR(.LMR) 28L006.xxx.MR 28L006.xxx.RMR(.LMR) 28L014.xxx.MR 28L014.xxx.MRPN 28L014.xxx.RMR(.LMR) 28L015.xxx.MR 28L015.xxx.MRPN 28L015.xxx.RMR(.LMR) 28L016.xxx.MR 28L016.xxx.MRPN 28L016.xxx.RMR(.LMR) 28L017.xxx.MR 29L017.xxx.MRPN 29L017.xxx.RMR(.LMR) 29L018.xxx.MR 29L018.xxx.MRPN 29L018.xxx.RMR(.LMR) 29M502.xxx.ENTR 116M502.xxx.FD 116M502.xxx.LENT(.RENT) 116M502.xxx.LFD(.RFD) 116M504.xxx.ENTR 116M504.xxx.FD 116M504.xxx.LENT(.RENT) 116M504.xxx.LFD(.RFD) 116M512.xxx.ENTR 116M512.xxx.FD 116M512.xxx.LENT(.RENT) 116M512.xxx.LFD(.RFD) 116M514.xxx.ENTR 116M514.xxx.FD 116M514.xxx.LENT(.RENT) 116M514.xxx.LFD(.RFD) 116M516.xxx.BB30(.BB75) 117M516.xxx.BBFD 117M516.xxx.LENT(.RENT) 117M516.xxx.LFD(.RFD) 117M522.xxx.BB30(.BB75) 117M522.xxx.BBFD 117M522.xxx.ENTR 117M522.xxx.FD 117M522.xxx.LENT(.RENT) 117M522.xxx.LFD(.RFD) 117MP000.000.AINS 151MP000.000.AINT 151MP000.000.FDPTP 151MP000.000.FDPTQ 151MP000.xxx.ACTA 155MP000.xxx.ACTB 155MP000.xxx.ACTC 155MP000.xxx.ACTD 157MP000.xxx.ACTE 157MP000.xxx.ACTF 157MP000.xxx.ACTG 157MP000.xxx.ACTI 157MP000.xxx.PATJ 157MP000.xxx.PATK 157MP000.xxx.PATL 157MP000.xxx.PATM 157MP000.xxx.PATO 157PAT1 150PAT2 152PAT3 154PAT4 156PAT5 158PAT6 160PAT7 164PAT8 166PKT3 154PKT5 158PKT6 160R001.xxx.FD 35R001.xxx.IDM 35R001.xxx.IPS 35R001.xxx.IPV 35R001.xxx.PV 35R002.xxx.FD 35R002.xxx.IDM 35R002.xxx.IPS 35R002.xxx.IPV 35R002.xxx.PS 35R002.xxx.PV 35R003.xxx.FD 35R003.xxx.IDM 35R003.xxx.IPS 35R003.xxx.IPV 35R003.xxx.PS 35R003.xxx.PV 35R004.xxx.FD 35R004.xxx.IDM 35R004.xxx.IPS 35R004.xxx.IPV 35R004.xxx.PS 35R004.xxx.PV 35R005.xxx.FD 35R005.xxx.IDM 35R005.xxx.IPS 35R005.xxx.IPV 35R005.xxx.PS 35R005.xxx.PV 35R006.xxx.FD 35R006.xxx.IDM 35R006.xxx.IPS 35R006.xxx.IPV 35R006.xxx.PS 35R006.xxx.PV 35R007.xxx.FD 36R007.xxx.IDM 36R007.xxx.IPS 36R007.xxx.IPV 36R007.xxx.PS 36R007.xxx.PV 36R008.xxx.FD 36R008.xxx.IDM 36R008.xxx.IPS 36R008.xxx.IPV 36R008.xxx.PS 36R008.xxx.PV 36R009.xxx.FD 36R009.xxx.IDM 36R009.xxx.IPS 36R009.xxx.IPV 36R009.xxx.PS 36R009.xxx.PV 36R010.xxx.FD 36R010.xxx.IDM 36R010.xxx.IPS 36R010.xxx.IPV 36R010.xxx.PS 36R010.xxx.PV 36R011.xxx.FD 36R011.xxx.IDM 36R011.xxx.IPS 36R011.xxx.IPV 36R011.xxx.PS 36R011.xxx.PV 36R012.xxx.FD 36R012.xxx.IDM 36R012.xxx.IPS 36R012.xxx.IPV 36R012.xxx.PS 36R012.xxx.PV 36R016.xxx.FD 37R016.xxx.IDM 37R016.xxx.IPS 37R016.xxx.IPV 37R016.xxx.PS 37R016.xxx.PV 37R017.xxx.FD 37R017.xxx.IDM 37R017.xxx.IPS 37R017.xxx.IPV 37R017.xxx.PS 37R017.xxx.PV 37R018.xxx.FD 37R018.xxx.IDM 37R018.xxx.IPS 37R018.xxx.PS 37R025.xxx.FD 37R025.XXX.IDM 37R025.xxx.IPS 37R025.XXX.PS 37R025.xxx.PV 37R025.xxx.RPV(.LPV) 37R026.XXX.FD 37R026.xxx.IDM 37R026.xxx.IPS 37R026.xxx.IPV 37R026.xxx.PS 37R026.xxx.PV 37R027.xxx.FD 38R027.xxx.IDM 38R027.xxx.IPS 38R027.xxx.IPV 38R027.xxx.PS 38R027.xxx.PV 38R028.xxx.FD 38R028.xxx.IDM 38R028.xxx.IPS 38R028.xxx.PS 38R028.xxx.PV 38R028.xxx.RPV(.LPV) 38R029.xxx.EGRK 38R029.xxx.EGRL 38R029.xxx.ENTR 38R029.xxx.FD 38R029.xxx.IDM 38R029.xxx.IPS 38R029.xxx.PS 38R029.xxx.PV 38R029.xxx.RPV(.LPV) 38R030.xxx.FD 38R030.xxx.IDM 38R030.xxx.IPS 38R030.xxx.IPV 38R030.xxx.PS 38R030.xxx.PV 38R031.xxx.FD 38R031.xxx.IDM 38R031.xxx.IPS 38R031.xxx.PS 38R031.xxx.PV 38R031.xxx.RPV(.LPV) 38R032.xxx.EGRK 38R032.xxx.EGRL 38R032.xxx.ENTR 38R032.xxx.FD 38R032.xxx.IDM 38R032.xxx.IPS 38R032.xxx.PS 38R032.xxx.PV 38R032.xxx.RPV(.LPV) 38R033.xxx.FD 39R033.xxx.IDM 39R033.xxx.IPS 39R033.xxx.IPV 39R033.xxx.PS 39R033.xxx.PV 39R034.xxx.FD 39R034.xxx.IDM 39R034.xxx.IPS 39R034.xxx.PS 39R034.xxx.PV 39R034.xxx.RPV(.LPV) 39R035.xxx.EGRK 39R035.xxx.EGRL 39R035.xxx.ENTR 39R035.xxx.FD 39R035.xxx.IDM 39R035.xxx.IPS 39R035.xxx.PS 39R035.xxx.PV 39R035.xxx.RPV(.LPV) 39R036.xxx.FD 39R036.xxx.IDM 39R036.xxx.IPS 39R036.xxx.IPV 39R036.xxx.PS 39R036.xxx.PV 39R037.xxx.FD 39R037.xxx.IDM 39R037.xxx.IPS 39R037.xxx.PS 39R037.xxx.PV 39R037.xxx.RPV(.LPV) 39R038.xxx.ENTR 39R038.xxx.FD 39R038.xxx.IDM 39R038.xxx.IPS 39R038.xxx.PS 39R038.xxx.PV 39R038.xxx.RPV(.LPV) 39R039.xxx.FD 40R039.xxx.IDM 40R039.xxx.IPS 40R039.xxx.IPV 40R039.xxx.PS 40R039.xxx.PV 40R040.xxx.FD 40R040.xxx.IDM 40R040.xxx.IPS 40R040.xxx.PS 40R040.xxx.PV 40R040.xxx.RPV(.LPV) 40R041.xxx.EGRK 40R041.xxx.EGRL 40R041.xxx.ENTR 40R041.xxx.FD 40R041.xxx.IDM 40R041.xxx.IPS 40R041.xxx.PS 40R041.xxx.PV 40R041.xxx.RPV(.LPV) 40R042.xxx.FD 40R042.xxx.IDM 40R042.xxx.IPS 40R042.xxx.IPV 40R042.xxx.PS 40R042.xxx.PV 40R043.xxx.FD 40R043.xxx.IDM 40R043.xxx.IPS 40R043.xxx.PS 40R043.xxx.PV 40R043.xxx.RPV(.LPV) 40R044.xxx.ENTR 40R044.xxx.FD 40R044.xxx.IDM 40R044.xxx.IPS 40R044.xxx.PS 40R044.xxx.PV 40R044.xxx.RPV(.LPV) 40TK001.xxx 53TK002.xxx 53TK003.xxx 53TK004.xxx 53TK005.xxx 53U5510.xxx 47U8201.xxx.DB 176U8202.xxx.DB 176U8208.xxx.DB 176U8209.xxx.DB 176

INDEXALPHABETICALNUMERICALALPHABETICAL INDEXPAGEAmerican Cylinder – See Multi–PointArmored Fronts 131Blocking Rings 133Communicating Door Kit 64Cremone Bolt 140Back PlatesEdinburgh 220Cabinet Pull Base 220Knob 220Bell ButtonsBeaded 186Oval 187Rectangular 187Round 186Victorian 187Casement Fastenersw/Mortise Strike 192, 193w/Rim Strike 192, 193w/Surface Strike 192, 193CylindersKey Blanks 138Lock Trim Thickness Index 132Mortise Cylinders (Single & Double) 133Cylinders - Accessories5–pin Cylinder Spring Covers 1346–pin Cylinder Spring Covers 134Adams Rite Cam 134Cylinder Springs 134Emhart Cam 134Mortise Lock Turn Piece Cylinders 134Residential Trim Marking Template Doors 134Rim Cylinder Tailpieces 134Standard Cam 134Cylinders – C-Keyway Table 133Cylinders – Cylinder Trim/CollarsBeaded Cylinder Collar 135Blocking Rings 135Colonial Cylinder Collar 135Compression Cylinder Collar 135Contemporary Round Collar 135Contemporary Round Stainless 135Contemporary Square Collar 135Contemporary Square Stainless 135Cylinder Collar 135Cylinder Lock Cover Plate 135Dummy Cylinder 135European Mortise Cylinder Collars 69Lakeshore Cylinder Collar 135Oval Cylinder Collar 135Square Cylinder Collar 135Wrought Cylinder Collar 135Cylinders - Rim Cylinders 137DeadboltsArched 179Bethpage 178Contemporary 176, 177Soho 179Squared 179Tahoe 178Traditional 177, 178Deadbolts - Accessories 183Deadbolts - Conversion Kits 180Deadbolts - Components ComponentsBethpage Turn Piece 182Contemporary Inside Cylinder Collar 182Contemporary Outside Cylinder Collar 182Contemporary Turn Piece Assembly 182Cyl. And Tail Piece–Egress Handlesets 182Cylinder Cap Tool 182Cylinder Tail Piece 182Cyl. Threaded Sleeve–Mounting Dbl Cyl.Deadbolt182Double Cylinder For Handlesets &Deadbolts182Pan Head Thru–Bolt 182Traditional Inside Cylinder Collar 182Traditional Outside Cylinder Collar 182Traditional Turn Piece Assembly 182Tumbler Springs 182Turn Piece Tail Piece, Older Style Handleset 182Deadbolts - Latches 183Deadbolts - StrikesDust Box 182Radius Corner Deadbolt Strike 182Standard Security Deadbolt Strike 182Deadbolts - Thick Door KitsFor New Mechanics 181For Original Mechanics 181Deadbolts - Trim Rings & CollarsCylinder Collar Spacers 183Double Cylinder Conv. Kit 183Single Cylinder Conv. Kit 183Trim Rings 183Door GuardsChain 188Security 188Door StopsBase Mounted Door Bumpers 203Concave Wall Bumpers 203Convex Wall Bumpers 203Floor Bumper 202Half Dome Door Bumper 202Lever Door Holder 203Riser for Dome Bumper 202Universal Floor Bumper 202Dust BoxesFor Deadbolt Latch 182For Interior Tubular Lock (for 5510 Latch) 48For Mortise Lock 131Emergency Release Trim & Backplates 54Edge Pulls 191Entrance Trim (Mortise & Tubular)Ashton 80Atlanta 99Baltimore 92Barclay 111Bethpage Sectional 71Bethpage 76Bethpage (Mortise) 117Bismark 105Blakely 75Boston 88Boulder 78Boulder ¾ (Mortise) 116Boulder ¾ 78Boulder (Mortise) 116Bristol (Tubular) 72Bristol 110Bristol Lever 110Bristol Sectional 83Buckingham 75Canterbury 69Chicago 96Cody 79Cody ¾ (Mortise) 116Cody ¾ 79Cody (Mortise) 116Concord 100Dallas 103Denver 103Detroit 95Devonshire 77Edinburgh 109Edinburgh Sectional 82Edinburgh (Oval) 82Fenwick 109Georgetown 91Glennon 74Hamilton 89Houston 113Kensington 108Kensington 84Kensington ¾ (Tubular) 77Lakeshore 112Lakeshore Lever 112Lakewood 102Lancaster 88Landon 81Lexington 94Logan 70Madison 69Manchester 73Minneapolis 114Mobile 104Monterey 97Nantucket 73Nashville 90New York 95Pasadena 106Reading 98Richland 115Richmond 93San Diego 85San Francisco 86Soho 72Soho ¾ 80Soho Two-Point 81Soho (Mortise) 117Springfield 101Stanford 89Stonegate 74Tahoe Sectional 71Tahoe 76Tremont 87Trenton 98Versailles 107Victoria 107Westminster 108229

INDEXALPHABETICALEntrance Trim (Mortise & Tubular)(continued)Williamsburg 91Wilmington 94Flush Bolts & StrikesDustproof Strike 194Flush Bolts 194Rabbeted Guide 194Rabbeted Strike 194Flush Rings 190Garden/Gliding Door TrimBoulder 144Cody 145Concord 144Exterior Locking Cylinder Housing 145Hamilton 144Springfield 145HingesBall Bearing 208Cabinet 209Radius Corner 207Replacement Screws & Pins 205Square Corner 206How to Order & InstallationEssentials 4Dummy 6Passage 7Privacy 8House Numbers 187Installation ToolsAligning Bushing 56Aligning Tool & Bushing 56Socket Wrench 56Spanner Tool 56Keying - Kits & ComponentsBottom Pins 142Top Pins 142Master Pins 142Adams Rite Cams 142Cam mounting screws 142Cap 142Cap tool 142Cylinder plug follower 142Finish demonstrator 142Hotel pin 142Key gauge 142Large keying kit for all (C )keying 142Mounting plate 142Mounting screws 142Small keying kit for keying (C) cylindersalike142Spacer 142Spring covers 142Springs 142Standard cams 142Stile–right template 142Tailpiece 142Tumbler springs 142Tweezers 142Washer 142Keyless Entry - ElectronicsSoho Deadbolt 175Soho Sectional Handleset Kit 175Boulder Deadbolt 175Boulder Sectional Handleset Kit 175Kickplates 175Knobs - CabinetColonial 215Couture 215Crystal 212, 213Deco 214Decorative 216Dominion 214Edinburgh 214Melon 214Ornamental 215, 216Oval 215Ring Deco 213Rope 215Severin Fayerman Collection 213, 214Spherical 216Knobs - Interior A La Carte5000 125001 125005 125009 125011 125013 135015 135020 135023 135024.xxx.MR(.IMR) 135025 145030 145031 145041 145045 145050 155055 155055S 195057 155060 155061S 195063 155064 165065 165066 165067 165068 165069 175073 175077 Bethpage 175080 Filmore 17K001 18K002 18K003 18K004 18K005 19K006 19Knobs - Interior TubularPre-Configured Sets5015 Classic 415020 Colonial 415025 Egg 415041 Contemporary 425077 Bethpage 425080 Filmore 42Knobs - Tubular Keyed EntryBethpage (5237/5238/5239/5241) 45Classic (5205/5206/5208/5209) 44Colonial (5210/5211/5213/5214) 44Contemporary (5215/5216/5218/5219) 44Egg (5225/5226/5228/5229) 44Tahoe (5220/5221/5223/5224) 44Knockers“S” 185Colonial 185Colonial w/ Observascope 185French 185Imperial 186Observ-O-Scope (doors

INDEXALPHABETICALLevers - Interior A La Carte (continued)5168S 295170S 295172S 295173S 305177S 305190 255190E 665440V Colonial 265445V Classic 265447V Bethpage 265452V 265455V Wave 265460V Contemporary 275465V Tahoe 275485V Soho 27L002 27L004 27L005 28L006 28L014 28L015 28L016 28L017 29L018 29Levers - Interior TubularPre-Configured Sets5440V Colonial 425445V Classic 425447V Bethpage 435452V Bevertail 435455V Wave 435460V Contemporary 435485V Soho 43Levers - Tubular Keyed EntryBethpage (5237/5238/5239/5241) 45Classic (5245/5246/5248/5249) 45Tahoe (5265/5266/5268/5269) 46Wave (5255/5256/5258/5259) 46Misc - Replacement Parts 139Mortise - Bolts 51Mortise - Deadlocks 128Mortise - EuropeanHow to Order 65, 168Configuration 7 (72mm CTC) 164Configuration 8 (85mm CTC) 166Sectional Trims 64Mortise Locks - AccessoriesStrikes 130Armored Fronts 131Mortise Locks - Electrical 129Mortise Locks - Entrance Function 122Mortise Locks - Grade 1,Light Duty Commercial124Mortise Locks - Interior, Heavy Duty 127Mortise Locks - Interior, Small Case 126Multi-PointConfiguration 1 (Profile Cylinder BelowHandle – 8 ½” CTC)150Configuration 2 (American CylinderAbove Handle – 8 ½” CTC)152Configuration 3 (American CylBelow Handle – 8 ³⁄8” CTC)154Configuration 4 (Profile CylinderBelow Handle – 7 7 ⁄8” CTC)156Configuration 5 (American CylAbove/Below Handle – 7 9 ⁄16” CTC)158Configuration 6 (American CylinderAbove Handle – 7 ¼” CTC)160Pre-Drilled Door Accessories2 ¹⁄8” Pre-Drilled Door Adaptor 55Dummy Insert & Filler Plate 55Closet Spindles 55PrivacyButton - Knob Strength 46Button - Lever Strength 46Button Extender 46Pull Plates 197PullsAtlanta 198Bristol 199Concord 199Contemporary 198Edinburgh 199Empire 198Hamilton 199Kensington/Victoria 201Lancaster/Charleston/Plymouth 200Lexington 199Monterey 201New York/Princeton/Richland 198Pasadena 200Pitcher 200Renssalear 200Richmond 198Ring Pull 201San Diego 198Springfield 200Tahoe 201Tremont 198Trenton 201Utility 198Pulls - Appliance 221Pulls - CabinetArch 219Colonial 219Contour 218Couture Collection 217Crystal 216Cup 217Deco 218Dominion 219Edinburgh 219Melon Cup 218Oval 218Satin Crystal 216Severin Fayerman Collection 217Spindle 218Wire 219Push PlatesArched 196Bristol 197Nashville 196Rounded 196San Francisco 197Scalloped 196Square Edge 196Rim LocksAccessories 172Entrance, Special Function 170Passage, Privacy, Entrance 169Rim Cylinders 137Standards & Specifications 168Trim 171Roller & Ball CatchesAdjustable Ball Catch 191Adjustable Roller Catch 191Roller Latch 191Sash Locks & PullsFlush Pull 192Sash Lift 192Sash Lock 192Rossettes5002 305003 305004 315006 315010 315016 325016E 685017 305017E 685019 325021 325027 325027E 685028 335032 315032E 685035 335038 335042 345046 315047 345048 305053 325056 345056E 685058 345059 345062 325070 315075 335076 335078 335119 325123 315127 335129 335134 335139 315142 345145 325146 315147 345148 305149 315151 315153 32231

INDEXALPHABETICALRossettes (continued)5155 335156 335157 335158 345159 345160 345032S 415033S 415034S 415133S 415139S 41R001 35R002 35R003 35R004 35R005 35R006 35R007 36R008 36R009 36R010 36R011 36R012 36R016 37R017 37R018 37R025 37R026 37R027 38R028 38R029 38R030 38R031 38R032 38R033 39R034 39R035 39R036 39R037 39R038 39R039 40R040 40R041 40R042 40R043 40R044 40Sliding Door Locks 143Spare PartsRose Retainers 56Screw Bases 55Screw Covers 55Set Screw 56Trim Plates 56SpindlesCloset Spindles 55Dummy Spindles 49Broached Straight Spindles 50Broached Straight Spindles - 8mm square 67Broached Swivel Spindles 50Broached Half Spindles 50Transitional Straight Spindles 50Transitional Swivel Spindles 50Transitional Half Spindles 50StrikesAngle 188ASA Extended Lip - Mortise 130ASA Straight & Curved Lip - Mortise 130ASA Strike - Tubular 48Combination Privacy Strike - Tubular 48Deadlock - Mortise 131Extended Full Lip Strike - Tubular 48Extended T Strike - Tubular 48Full Lip Strike - Tubular 48Heavy Duty Angle 188Mortise 188Rabbeted Door - Mortise 131Surface 188T-Strike - Tubular 48Universal 188Surface Bolts 189SwitchplatesBeveled Edge 209, 210Colonial 210, 211Rope 211Thin & Thick Door KitsThick Door Mortise Kits 118Thin Steel Door Mortise Kits 119Thin Steel Door Tubular Kits 119Tools & Accessories 142Tubular Entrance Sets -See Entrance TrimTubular Deadbolts - See DeadboltsTubular Keyed Entry Levers-See Levers - Tubular Keyed EntryTubular Keyed Entry Knobs -See Knobs - Tubular Keyed EntryTurn Knobs 44Turn Pieces 44UL Kits - Passage & Privacy Tubular 47

NOTES233

INDEXNOTES

INDEXNOTES235

CONDITIONS OF SALETERMS: 2%/25 Days, Net/30SHIPMENTS: U.S. customers - F.O.B. Charlotte, NC or Reading, Pa. Full freight allowed onpurchase orders of $1,000 net invoice value, sent through routing of our selection. Delivery ismade to curb or dock side only. Freight allowed shipments to Alaska will be prepaid to Seattle,to Hawaii will be prepaid to San Fransisco, and to Puerto Rico will be prepaid to Miami. Upondelivery to the transportation company, shipments become the property of the purchasers, whoassume full risk for loss or damage in transit.International Customers - Orders of $1,000 net invoice value will ship FCA to city specified onthe commercial invoice. Orders of less than $1,000 net value will ship EXW. Exceptions will besubject to the INCO terms stated on the commercial invoice. Candian customers should contacttheir sales reps for variations to these terms.CLAIMS: All claims, whether referring to errors in prices, or in filling orders or for defectivegoods, must be submitted IN WRITING within 30 days after receipt of shipment. Tracing of alllost shipments must be submitted IN WRITING within 30 days or the liability and risk is placedon the purchasers. All issued documents by a carrier confirming receipt of a shipment must behonored by the purchasers.RETURNED GOODS: Returned goods will not be accepted unless authorized in writing byBaldwin within 120 days of invoice date. A minimum 25% handling charge and freight will becharged on all stock items returned in original condition. Special and custom products are notreturnable for credit. An 80% handling charge will be imposed on products damaged. No creditwill be given for items returned without written authorization, nor will the items be returned tothe customer. Authorized returns become void after a period of 30 days from issue date of theReturned Goods Authorization. All credit returns must be shipped to us, FREIGHT PREPAID.ORDERS: Orders of less than $250.00 net will automatically incur a $15.00 surcharge. Mostorders for stock items will be shipped within four (4) weeks from receipt of order. To expeditecustomer orders, items unavailable from stock at time of shipment will be back-ordered unlessotherwise noted by customer. Quantities of a particular item will be rounded to the next full boxquantity without incurring any obligations for credit. We reserve the right to decline the whole orpart of orders in which the price, finishes or quantity of goods is not satisfactory to us. We reservethe right to discontinue items or change specifications at any time without notice and withoutincurring any obligations. The corporation cannot be liable for extended delivery dates whichmay result in the cancellation of an order.CANCELLATIONS: While Baldwin will attempt to comply with customer’s written change ordersand/or cancellations, we cannot guarantee that they can be accomplished before shipment.Appropriate handling charges on returns will be exercised if the order has been shipped beforeprocessing a change order request. All requests must be submitted in writing.PRICES: The price list in effect on the date customer order is received will determine billingprice. Orders requiring delivery in excess of three (3) months will be billed at prices in effect attime of shipment, unless quoted to the contrary in writing by our company.Orders being held by Baldwin because of account credit status may be repriced to the price ineffect the day the order is released by the Baldwin Credit Department.SPECIFICATIONS: Packing, weights, measurements, and design are subject to changewithout notice.SPECIAL FABRICATION: Items of Special Manufacture are not cancelable after a period of72 hours from receipt of an order. A cancellation of this nature will result in a penalty charge equalto the total expenses incurred on the product. Delivery on orders of special fabrication cannot beguaranteed due to variables beyond our control. The corporation cannot be liable for extendeddeliveries on special orders and consequently, are not cancelable.Limited Lifetime Mechanical Warranty: Baldwin warrants that each Baldwin product shallbe free of mechanical defect for the original purchaser for as long as you own your home.Limited Lifetime Finish Warranty: The Baldwin Lifetime Finish uses advanced finishingtechnology (physical vapor deposition) to create a finish highly resistant to the effects of weatherand normal wear and tear. The Limited Lifetime Finish Warranty on Lifetime Finish productscovers the original purchaser for as long as you own your home.Limited Finish Warranty: The finish on Baldwin products (excluding Lifetime Finishand living finish products) is protected by a durable topcoat designed to maintain the beautyand quality of the Baldwin product. The Baldwin Limited Finish Warranty covers the originalpurchaser for five years from date of purchase for interior use and one year for exterior use.Living Finishes: Due to the nature of Baldwin living finish products, they will wear over timeand may already have begun the process before reaching your home. No fi nish warrantyis offered on living finish products, which are designed to age and improve over time. Livingfinishes include raw brass, oil rubbed bronze, stainless steel, and other non-lacquered or non-PVD finishes.IMPORTANT! You must install Baldwin strikeplate or your warranty is void.Except as expressly provided in this warranty to the contrary, (a) BALDWIN MAKES NO, ANDDISCLAIMS ALL, WARRANTIES, REPRESENTATIONS AND GUARANTEES (WHETHEREXPRESS, IMPLIED OR STATUTORY), INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND (b)BALDWIN SHALL NOT BE OBLIGATED OR LIABLE FOR LABOR OR OTHER COSTS RELATEDTO INSTALLATION, REPAIR OR REPLACEMENT OR FOR LOSS OF, OR DAMAGE TO, ANYMATERIAL WHICH IS NOT SOLD BY BALDWIN. IN NO EVENT SHALL THE DURATION OF ANYIMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSEBE LONGER THAN the lifetime of the applicable product or for as long as the original purchaserowns the product. This warranty is the only express warranty provided by Baldwin. No employee,representative or agent nor any other person has authority to assume or incur on behalf of Baldwinany obligation or liability in place of or in addition to this warranty.Each of Baldwin’s direct customers shall receive any claims and take delivery of any allegedlydefective Baldwin products from the consumers and shall communicate and otherwise cooperatein a reasonable manner with Baldwin concerning the administration, processing and remedyingof such claims, including, but not limited to, delivering repaired or replacement Baldwin productsor, in the appropriate case, purchase price refunds to consumers. Please Note: The limitedwarranty on all locks or latches is void if used in combination with knobs, levers or trim of otherthan those manufactured by Baldwin and designated for use with the applicable locks or latches.STANDARDS OF EXCELLENCE: Baldwin Hardware Corporation has produced a rangeof products in accordance to the HIGHEST AMERICAN STANDARDS OF QUALITY ANDEXCELLENCE. All brass products are manufactured from the finest quality brass obtainable;however, these products are susceptible to indentation and imperfections due to the malleabilityof the material and the elements of human intervention when crafting the product. Although ourinternal safeguards protect us against shipping products of unacceptable quality, an imperfectionor surface blemish may be considered the highest Quality Standard obtainable on a particularproduct. Baldwin is committed to producing each item to the most stringent guidelines andquality of human ability and excellence; however, all final decisions of Quality remain exclusivelyin the authorization of the Corporation. While Baldwin makes every effort to provide an accurateprice list, we are not responsible for errors and/or omissions which may appear. Customers willbe invoiced the actual price on all orders.

INTERIOR & ENTRANCE HARDWARESPINDLES0509 - 0516 Broached Straight Spindles – PASSAGEItem # Description Size0509.004 Broached straight 3˝0510.004 Broached straight 3.5˝0511.004 Broached straight 4˝0512.004 Broached straight 4.5˝0513.004 Broached straight 5˝0514.004 Broached straight 5.5˝0515.004 Broached straight 6˝0516.004 Broached straight 7˝$120509 - 0516 Broached Swivel Spindles – PRIVACYItem # Description Size0519.004 Broached swivel 3˝0520.004 Broached swivel 3.5˝0521.004 Broached swivel 4.5˝0522.004 Broached swivel 4˝0523.004 Broached swivel 5˝0524.004 Broached swivel 5.5˝0525.004 Broached swivel 6.5˝$160530 - 0533 Broached Half Spindles – FRONT DOOR(thumbpiece to knob or lever)Item # Description Size0530.004 Broached half 2.375˝0531.004 Broached half 2.875˝0532.004 Broached half 3.375˝0533.004 Broached half 2.25˝0539.004 Broached half 2.625˝$12> For mounting all current Estate knobs and levers to thumbpiece of handlesets> Included with all ‘set’ ordersSPINDLE CHART & KEYDoorThicknessLock TrimThicknessSpindle1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝HalfSpindle SpindleHalfSpindle SpindleHalfSpindle SpindleHalfSpindle SpindleHalfSpindleA – .0625˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝B – .0937˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝C – .125˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝D – .1875˝ 3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝ 5˝ 2.375˝E – .25˝Estate Roses3.5˝ 2.25˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5˝ 2.875˝F – .3125˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5˝ 2.375˝ 5˝ 2.875˝G – .375˝ 4˝ 2.25˝ 4.5˝ 2.25˝ 5˝ 2.375˝ 5.5˝ 2.875˝ 5.5˝ 2.875˝H – .435˝ 4.5˝ 2.25˝ 4.5˝ 2.375˝ 5˝ 2.375˝ 5.5˝ 2.625˝ 5.5˝ 2.875˝I – .56˝ 5˝ 2.25˝ 5˝ 2.375˝ 5.5˝ 2.625˝ 6˝ 2.625˝ 6˝ 2.875˝J – .75˝ 5˝ 2.625˝ 5.5˝ 2.875˝ 5.5˝ 2.875˝ 6˝ 2.875˝ 6˝ 2.875˝.A SUFFIX TRANSITIONAL SPINDLES (OLD STYLE):For use with all discontinued Estate threaded knobs & levers,as well as all current Estate knobs and leversTransitional Straight Spindles – PassageItem # Description Size0509.004.A Transitional straight 3˝0510.004.A Transitional straight 3.5˝0511.004.A Transitional straight 4˝0512.004.A Transitional straight 4.5˝0513.004.A Transitional straight 5˝0514.004.A Transitional straight 5.5˝0515.004.A Transitional straight 6˝0516.004.A Transitional straight 7˝Transitional Swivel Spindles – PrivacyItem # Description Size0519.004.A Transitional swivel 3˝0520.004.A Transitional swivel 3.5˝0521.004.A Transitional swivel 4.5˝0522.004.A Transitional swivel 4˝0524.004.A Transitional swivel 5˝0525.004.A Transitional swivel 6.5˝Transitional Half Spindles – Front Door (thumbpiece to knob or lever)Item # Description Size0530.004.A Transitional half 2.375˝0531.004.A Transitional half 2.875˝0532.004.A Transitional half 3.375˝0533.004.A Transitional half 2.25˝$17$21$17Questions? Please call Customer Service:TEL: 800.437.7448 8AM – 5PM EST FAX: 800.255.9785

CYLINDERSC KEYWAY TABLESingle Cylinder – C KeywayDoorThicknessLock TrimThicknessA – .0625˝B – .0937˝C – .125˝D – .1875˝E – .25˝F – .3125˝G – .375˝H – .435˝H1 – .53˝I – .56˝J – .75˝CylinderLength1˝8321.xxx1˝8321.xxx1˝8321.xxx1˝8321.xxx1˝8321.xxx1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.5˝8325.xxx1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝BlockingRing.1875˝8440.xxx.5.1562˝8440.xxx.4.125˝8440.xxx.3————————CylinderLength1˝8321.xxx1˝8321.xxx1.125˝8322.xxx1.125˝8322.xxx1.25˝8323.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxx1.5˝8325.xxx1.5˝8325.xxx1.625˝8326.xxxBlockingRing———————————CylinderLength1.125˝8322.xxx1.125˝8322.xxx1.125˝8322.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxx1.625˝8326.xxx1.625˝8326.xxx1.75˝8327.xxxBlockingRing———————————CylinderLength1.25˝8323.xxx1.25˝8323.xxx1.25˝8323.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxx1.5˝8325.xxx1.625˝8326.xxx1.75˝8327.xxx1.75˝8327.xxx2˝8328.xxxBlockingRing——————————.125˝8440.xxx.3CylinderLength1.375˝8324.xxx1.375˝8324.xxx1.375˝8324.xxx1.5˝8325.xxx1.5˝8325.xxx1.625˝8326.xxx1.625˝8326.xxx1.75˝8327.xxx2˝8328.xxx2˝8328.xxx2˝8328.xxxBlockingRing———————————Item # Description8321.xxx 1˝ Mortise Cyl.8322.xxx 1.125˝ Mortise Cyl.8323.xxx 1.25˝ Mortise Cyl.8324.xxx 1.375˝ Mortise Cyl.8325.xxx 1.5˝ Mortise Cyl.8326.xxx 1.625˝ Mortise Cyl.8327.xxx 1.75˝ Mortise Cyl.8328.xxx 2˝ Mortise Cyl.8329.xxx 2.25˝ Mortise Cyl.8330.xxx 2.5˝ Mortise Cyl.031, 033, 040,050, 060, 102,112, 150, 151,152, 190, 260, 264NOTE: When ordering cylinders forG-SERIES MORTISE LOCKS, use this chart,but add a suffix ‘.EMHT’ to the end of the Item #.(same price as standard C keyway cylinders)EXAMPLE:Lifetime Polished Brass 1.25˝ cylinder for G-series mortise8323.003.EMHT8321-8330003055056$50 $55$110 115Double Cylinder - C KeywayDoorThicknessLock TrimThicknessA – .0625˝B – .0937˝C – .125˝D – .1875˝E – .25˝F – .3125˝G – .375˝H – .435˝I – .5625˝J – .75˝F –.3125˝ExteriorK – .875˝ExteriorCylinderLength1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1.125˝8322.xxx.DBL1.125˝8322.xxx.DBL1.5˝8325.xxx.DBL1˝8321.xxx1.5˝8325.xxx1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝BlockingRing.2812˝+8440.xxx.7.25˝+8440.xxx.6.2187˝+8440.xxx.6.1526˝+8440.xxx.4.1875˝8440.xxx.5.0625˝8440.xxx.1—.0625˝8440.xxx.1.0937˝+8440.xxx.2.0937˝+8440.xxx.2——CylinderLength1˝8321.xxx.DBL1˝8321.xxx.DBL1˝8321.xxx.DBL1.125˝8322.xxx.DBL1.125˝8322.xxx.DBL1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL1.5˝8325.xxx.DBL1.625˝8326.xxx.DBL1.125˝8322.xxx1.75˝8327.xxxBlockingRing.1875˝8440.xxx.5.125˝8440.xxx.3.0625˝8440.xxx.1.093˝+8440.xxx.2.0625˝8440.xxx.1.093˝+8440.xxx.2.0625˝8440.xxx.1—.0625˝8440.xxx.1.0625˝8440.xxx.1——CylinderLengthBlockingRing1˝8321.xxx.DBL —1.125˝8322.xxx.DBL1.125˝8322.xxx.DBL.0625˝8440.xxx.1.0625˝8440.xxx.11.125˝8322.xxx.DBL —1.25˝8323.xxx.DBL.0625˝8440.xxx.11.25˝8323.xxx.DBL —1.375˝8324.xxx.DBL1.5˝8325.xxx.DBL1.5˝8325.xxx.DBL1.75˝8327.xxx.DBL1.25˝8323.xxx2˝8328.xxx.0625˝8440.xxx.1.0625˝+8440.xxx.1.0625˝8440.xxx.1.0625˝8440.xxx.1—.125˝8440.xxx.3CylinderLengthBlockingRing1.125˝8322.xxx.DBL —1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL1.25˝8323.xxx.DBL1.375˝8324.xxx.DBL1.375˝8324.xxx.DBL1.5˝8325.xxx.DBL1.5˝8325.xxx.DBL1.625˝8326.xxx.DBL2˝8328.xxx.DBL1.375˝8324.xxx2˝8328.xxx0625˝8440.xxx.1.0625˝8440.xxx.1—.0625˝8440.xxx.1—.0625˝8440.xxx.1—.156˝+8440.xxx.4.156˝+8440.xxx.4——CylinderLengthBlockingRing1.25˝8323.xxx.DBL —1.375˝8324.xxx.DBL1.375˝8324.xxx.DBL1.375˝8324.xxx.DBL1.5˝8325.xxx.DBL1.5˝8325.xxx.DBL1.625˝8326.xxx.DBL1.625˝8326.xxx.DBL2˝8328.xxx.DBL2˝8328.xxx.DBL1.5˝8325.xxx2.25˝8329.xxx0625˝8440.xxx.1.0625˝8440.xxx.1—.0625˝8440.xxx.1—.0625˝8440.xxx.1—.0625˝8440.xxx.1.0625˝8440.xxx.1—.125˝440.xxx.3+Two Blocking Rings RequiredItem # Description8321.xxx.DBL 1˝ Double Cyl.8322.xxx.DBL 1.125˝ Double Cyl.8323.xxx.DBL 1.25˝ Double Cyl.8324.xxx.DBL 1.375˝ Double Cyl.8325.xxx.DBL 1.5˝ Double Cyl.8326.xxx.DBL 1.625˝ Mortise Cyl.8327.xxx.DBL 1.75˝ Mortise Cyl.8328.xxx.DBL 2˝ Mortise Cyl.8329.xxx.DBL 2.25˝ Mortise Cyl.8330.xxx.DBL 2.5˝ Mortise Cyl.Blocking RingsItem # Description8440.xxx.001 .0625˝ – ¹⁄16˝ B.R.8440.xxx.002 .0937˝ – ³⁄32˝ B.R.8440.xxx.003 .125˝ – ¹⁄8˝ B.R.8440.xxx.004 .1562˝ – 5 ⁄32˝ B.R.8440.xxx.005 .1875˝ – ³⁄16˝ B.R.8440.xxx.006 .25˝ – ¼˝ B.R.8440031, 033,040, 050,060, 102,112, 150,151, 152,190, 260,264003055056$100 $110220 230031, 033,040, 050,060, 102,112, 150,151, 152, 003190, 260, 055264 056$15 $20*Cylinders NOT available in Distressed finishes,non-distressed equivalents: 402=102, 412=112, 452=152Questions? Please call Customer Service:TEL: 800.437.7448 8AM – 5PM EST FAX: 800.255.9785

ENTR ANCE SETSHOW TO ORDERSTEP 1STEP 2PICK YOUR HANDLESET TRIM, W/ KNOB OR LEVER:PICK YOUR MORTISE BOXSuffix* Minus Strike*Right hand .R .RDTLeft hand .L .LDTRight hand Reverse bevel .RR .RRDTLeft hand Reverse bevel .LR .LRDTRight hand Lever Strength .RLS .RLSDTLeft hand Lever Strength .LLS .LLSDTRight hand Reverse bevel Lever Strength .RRLS . RRLSDTLeft hand Reverse bevel Lever Strength .LRLS . LRLSDTRight hand Reverse bevel Lever Strength .RRB1 —with 1˝ FrontLeft hand Reverse bevel Lever Strengthwith 1˝ Front.LRB1 —Backset Door Thickness FunctionMortiseBoxHANDLESET X KNOB HANDLESET X LEVER KNOB X KNOB LEVER X LEVERHandingPartNumberHandingPartNumberPartNumberPartNumber2.75˝ 1.75˝ and up Residential Entrance 6020 R 6020.xxx.R RLS 6020.xxx.RLS 6001.xxx.R 6001.xxx.RLSL 6020.xxx.L LLS 6020.xxx.LLS 6001.xxx.L 6001.xxx.LLSRR 6020.xxx.RR RRLS 6020.xxx.RRLS 6001.xxx.RR 6001.xxx.RRLSLR 6020.xxx.LR LRLS 6020.xxx.LRLS 6001.xxx.LR 6001.xxx.LRLS2.75˝ 1.75˝ and up Residential Entrance 6021 R 6021.xxx.R RLS 6021.xxx.RLS 6075.xxx.R 6075.xxx.RLSEmergency Egress L 6021.xxx.L LLS 6021.xxx.LLS 6075.xxx.L 6075.xxx.LLSRR 6021.xxx.RR RRLS 6021.xxx.RRLS 6075.xxx.RR 6075.xxx.RRLSLR 6021.xxx.LR LRLS 6021.xxx.LRLS 6075.xxx.LR 6075.xxx.LRLS2.75˝ 1.75˝ and up Entrance Back-to-Back 6025 - - - - - -2.5˝ 1.375 /1.75 and up Residential Entrance 6320 R 6320.xxx.R RLS 6320.xxx.RLS 6301.xxx.R 6301.xxx.RLSL 6320.xxx.L LLS 6320.xxx.LLS 6301.xxx.L 6301.xxx.LLSRR 6320.xxx.RR RRLS 6320.xxx.RRLS 6301.xxx.RR 6301.xxx.RRLSLR 6320.xxx.LR LRLS 6320.xxx.LRLS 6301.xxx.LR 6301.xxx.LRLS2.5˝ 1.375/1.75 and up Residential Entrance 6321 R 6321.xxx.R RLS 6321.xxx.RLS 6375.xxx.R 6375.xxx.RLSEmergency Egress L 6321.xxx.L LLS 6321.xxx.LLS 6375.xxx.L 6375.xxx.LLSRR 6321.xxx.RR RRLS 6321.xxx.RRLS 6375.xxx.RR 6375.xxx.RRLSLR 6321.xxx.LR LRLS 6321.xxx.LRLS 6375.xxx.LR 6375.xxx.LRLS2.5˝ 1.375/1.75 and up Entrance Back-to-Back 6325 - - - - - -STEP 3PICK YOUR CYLINDER (SEE INSIDE FLAP FOR CYLINDER TABLE)IF YOUR DOOR IS NOT 1.75˝ THICK, ALSO REQUIRED:STEP 4STEP 5STEP 6SPINDLE (SEE CHART)THICK DOOR KIT (DOORS OVER 1.75˝ AND UP TO 2.25˝ THICK)EXTENDED LIP STRIKEASA Strikes - Extended Lip6037, 6038, 60396338, 6339Lip to Center length determined by the following formula:Door thickness ÷ 2 + .375˝ (10mm) = Lip to Center lengthRound to closest size031, 033,034, 040, 050060, 102, 112150, 151, 152190, 260, 2646037, 6038, 6039, 6338, 6339.xxx – EXTENDED LIP STRIKES (HANDED)> Use with locks installed on special door/frame conditions> Supplied with a curved lip only> ALWAYS SPECIFY HAND OF DOOR AND REQUIRED LENGTH> Note: Reverse bevel doors use opposite hand for strike selection (ie. Right hand reverse bevel use left handstrike.)> Lip to Center lengths:.R158 or .L158 – 1.625˝ (41mm).R178 or .L178 – 1.875˝ (48mm).R214 or .L214 – 2.25˝ (57mm).R300 or .L300 – 3˝ (76mm)003055056Item # Function6037.xxx.XXXX 2.75˝ backset latch, deadbolt, aux latch6038.xxx.XXXX 2.75˝ backset latch only6039.xxx.XXXX 2.75˝ backset latch, deadbolt$65 $706338.xxx.XXXX 1.5,˝ 2,˝ 2.5˝ backset latch only6339.xxx.XXXX 1.5,˝ 2,˝ 2.5˝ backset latch, deadbolt.XXXX indicates Extended Lip to Center size = .R158, .L158, .R178, .L178, .R214, .L214, .R300, .L300*Strikes NOT available in Distressed finishes, non-distressed equivalents402=102, 412=112, 452=152

19701 DA VINCI . LAKE FOREST . CALIFORNIA 92610800.437.7448BALDWINHARDWARE.COM©2013 BALDWIN HARDWARE CORP. Lake Forest, CA USA. 18740-B