Pipe clamps - Ghanaibandtech.com

Fire protection
Overview of fire protection products for
pipe penetrations
Product
Area of application
MÜPROFLAM fire
intumescent pipe collar
Isolation of combustible
piping
MÜPROFLAM fire
intumescent sealant
Intumescent fire protection
sealant for the bulkheading
of combustible
and and non-combustible
pipes and for single flammable
cables
MypoTHERM ® caoutchouc
Bulkheading of insulated
heating system pipes and
hot water pipes
MypoTHERM ® caoutchouc
for chilled water
Bulkheading of insulated
cold water pipes
Fire resistance duration R90 R90 R60–R120 R90–R120
Building material class B2 acc. to DIN 4102 B1 acc. to DIN 4102 B1 acc. to DIN 4102
Combustible pipes Pipe outer diameter
32 – 160 mm
Wall thickness
1.8 – 6.2 mm
Pipe outer diameter
≤ 32 mm
Copper piping
Steel, stainless steel
piping
Cast pipe
Pipe outer diameter
≤ 160 mm
Pipe outer diameter
≤ 160 mm
Pipe outer diameter
≤ 160 mm
Pipe outer diameter
≤ 48 mm
Pipe outer diameter
≤ 48 mm
Pipe outer diameter
≤ 48 mm
Pipe outer diameter
≤ 42 mm
Pipe outer diameter
≤ 76 mm
Pipe outer diameter
≤ 76 mm
Insulation Acc. to LAR 03/2000 9 – 38 mm 13 – 32 mm
Ceiling penetration Thickness ≥ 150 mm Thickness ≥ 80 mm Thickness ≥ 150 mm Thickness ≥ 150 mm
Wall penetration Thickness ≥ 100 mm Thickness ≥ 80 mm Thickness ≥ 150 mm Thickness ≥ 150 mm
Light partition wall Thickness ≥ 100 mm Thickness ≥ 80 mm
Supplementary products Plugs, anchors or threaded
rods with washers and
Mineral wool melting
point
Mortar
MG 2, 2a or 3
Mortar
MG 2, 2a or 3
nuts
Ts > 1,000 °C
Verification, specification Z-19.11-1668 LAR 03/2000, previously P-3487/0239-MPA BS P-3487/0239-MPA BS
MLAR 03/2000
Documentation Nameplate
Declaration of conformity
Declaration of conformity Declaration of conformity
Remarks
Annular gap width
≤ 15 mm
Keep to the distance
specifications in LAR
03/2000
Gap between adjacent
insulations, A ≥ 200 mm
Observe the fire resistance
specifications in the
test certificate
Gap between adjacent
insulations, A ≥ 100 mm
Observe the fire resistance
specifications in the
test certificate
2/2
© – A concept for progress and quality
07/09