Pipe clamps - Ghanaibandtech.com

Fire protection
Data
MÜPROFLAM fire intumescent
sealant
Application areas:
Bulkheading of individual pipes in single penetrations through walls and ceilings according to
piping system guideline LAR 03/2000.
Description Material Pipe outside diameter
max. RA [mm]
Minimum building
element thickness
Bmin [mm]
Annular gap width
max. r
[mm]
Non-combustible piping
e. g. steel, copper, castings
≤ 160 ≥ 80 ≤ 15
Combustible piping e. g. PE, PB, PVC ≤ 32
Electric cables
Mounting instructions:
The annular gap around the individual pipes must be be completely closed off in each case with MÜPROFLAM
fire intumescent sealant. In the case of fire, the MÜPROFLAM fire intumescent sealant prevents spreading of fire,
smoke and gases through the gaps in the penetrations.
Please note that in piping with bulkheading, it is to be ensured that in the region of the penetrations, the isolating
bulkhead must be of non-flammable building material (melting point > 1,000 °C).
The individual pipes may be led
through solid walls and ceilings of
e.g. concrete or porous concrete
The use in lightweight partition walls
using vertical post construction must
have a surrounding pipe of noncombustible
material. The surrounding
pipe is puttied in place using a
non-inflammable mortar
Note:
All bulkheads must rigorously meet the local implementation conditions according to the piping system guidelines
e. g. regarding the spacing to be maintained between pipes etc.
2/6
© – A concept for progress and quality
07/09