A Division of Advanced Protection Technologies, Inc. - Tecno ...

ALARM
A Division of Advanced Protection Technologies, Inc.
Main Zone Protector
TE/1C40
The surgeassure TM TE/1C40 shields motor-driven appliances
in residential and light commercial applications against
electrical power surge damage from entering through the
main electrical service panel.
Multiple MOV technology with thermal disconnect to prevent
catastrophic failure.
Two LED lights indicate protection status. An audible alarm
alerts you when protection is disrupted.
Unique Ground Status Monitoring Circuit provides notifi cation
if excessive Neutral-Ground voltage is present, a red indicator
light will fl ash and the audible alarm will activate.
Major household electrical and electronic equipment are
covered against surge damage for 10 years when a TE/1C40
is installed by a licensed electrician.
If the TE/1C40 surge protector is damaged during the fi rst 10
years of ownership surgeassure TM will replace it free of charge!
INSTALLATION: SEE TE/1C40 USER’S MANUAL
N
A
B
BREAKER
G
• Use closest breaker to SPD
• Locate SPD close to
intended breaker
• Keep Leads Short as Possible
• Avoid Sharp Bends
• Rotate SPD such
that LED indicator is
most visible
• Outdoor installation requires
appropriate weather sealing at
nipple (sealing conduit, etc.)
FEATURES AND BENEFITS
• UL 1449 3rd Edition listed Type 2 Surge
Protective Device
• Rated for single phase panels up to 400 Amps
• Installation flexibility
• Audible Alarm
• Internal diagnostics keep you informed
• Ground Status Monitoring
• 10 Year product warranty
TECHNICAL SPECIFICATIONS
AC SURGE PROTECTION
Thermal Fusing
Yes
Catastrophic Surge Circuit Yes
Spike Capacity
40,000 Amps
Line Voltage
120/240 1 Phase 50/60 Hz
Initial Clamping Level
700V
Rated Voltage
150V
Response Time