Tannoy Di-Series Loudspeakers brochure - Canford Audio
Tannoy Di-Series Loudspeakers brochure - Canford Audio
Tannoy Di-Series Loudspeakers brochure - Canford Audio
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPECIFICATIONS<br />
ICT TM MODELS<br />
<strong>Di</strong>5<br />
<strong>Di</strong>6<br />
SYSTEM<br />
Frequency Response (-3dB) (1) 90Hz - 25kHz 75Hz - 22kHz<br />
Frequency Range (-10dB) (1) 80Hz - 30kHz 55Hz - 24kHz<br />
System Sensitivity (1W @1m) (2) 88dB 90dB<br />
1W = 2.45V for 6 Ohms<br />
<strong>Di</strong>spersion 90 90<br />
Degrees conical -6dB<br />
Low Frequency Driver 1x 110mm (4.50”) 1x 165mm (6.50”)<br />
Mineral loaded polypropylene<br />
High Frequency Driver ICT TM ICT TM<br />
Crossover 7kHz 7kHz<br />
Inductively Coupled ICT<br />
<strong>Di</strong>rectivity Factor (Q) 1kHz to 10kHz 5.3 averaged 10.5 averaged<br />
<strong>Di</strong>rectivity Index (DI) 1kHz to 10kHz 6.6 averaged 8.4 averaged<br />
Rated Maximum SPL (2) Average 105dB 107dB<br />
Peak 111dB 113dB<br />
Power Handling Average 50W 60W<br />
Programme 100W 120W<br />
Peak 200W 240W<br />
Recommended Amplifier Power 100W @ 6 Ohms 120W @ 6 Ohms<br />
Nominal Impedance 6 Ohms 6 Ohms<br />
<strong>Di</strong>stortion 10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic (6.0V) 2nd Harmonic 3rd Harmonic<br />
250Hz 2.00% 0.26% 1.86% 0.12%<br />
1kHz 0.53% 0.19% 1.17% 0.54%<br />
10kHz 2.50% 0.35% 1.10% 0.04%<br />
<strong>Di</strong>stortion 1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic (1.9V) 2nd Harmonic 3rd Harmonic<br />
250Hz 0.65% 0.09% 0.70% 0.14%<br />
1kHz 0.144% 0.11% 0.45% 0.39%<br />
10kHz 0.52% 0.298% 0.25% 0.065%<br />
CONSTRUCTION<br />
Enclosure<br />
Weather resistant high impact polystyrene (HIPS), IP64 to EN60529 (IEC529)<br />
Grille<br />
Steel, with weather resistant coating<br />
Finish<br />
Textured black or white paint with matching rubber trims<br />
Factory fitted custom trim colours available to special order<br />
Connectors<br />
Removable locking Euroblock type connector<br />
with screw terminals and "loop through" facility<br />
Fittings<br />
1 x socket for K-Ball bracket and 2 x M8 yoke bracket inserts<br />
Supplied Accessory<br />
Yoke bracket<br />
<strong>Di</strong>mensions 240.7 x 155.0 x 162.0mm 357.5 x 230.0 x 223.2mm<br />
9.47 x 6.10 x 6.38” 14.08 x 9.05 x 8.79”<br />
Weight 2.2kg (4.85lbs) 3.7kg (8.15lbs)<br />
TRANSFORMER VERSIONS <strong>Di</strong>5t <strong>Di</strong>6t<br />
Specifications as above except:<br />
Transformer Taps 70V 30W / 15W / 7.5W / 3.75W / OFF 60W / 30W / 15W / 7.5W / OFF<br />
Rotary switch & Low Impedance operation & Low Impedance operation<br />
mounted under trim<br />
100V 30W / 15W / 7.5W / OFF & 60W / 30W /15W / OFF &<br />
Low Impedance operation<br />
Low Impedance operation<br />
* Rated Maximum SPL (2) Average 103dB (using 30W transformer tap) 107dB (using 60W transformer tap)<br />
Weight 2.7kg (5.94lbs) 5.0kg (11.02lbs)<br />
*<br />
See Passive models above for max SPL figures on low impedance settings.<br />
Notes:<br />
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber<br />
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber<br />
A full range of measurements, performance data, and Ease TM Data can be downloaded from www.tannoy.com<br />
<strong>Tannoy</strong> operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications,<br />
which <strong>Tannoy</strong> reserves the right to alter without prior notice.
Change language