NUdE2 rEAr ShOCk - Bicykle scott

speedster technology
Addict Tube
Ratio 1:1
plasma tube
ratio 1:3 UCI rules
F01 Aero Technology
Ratio 3:2
F01 Aero Technology
Optimized NACA profiles maximize aerodynamic efficiency
at lower air speeds. The trailing edge is removed from a typical
airfoil to produce tubes that are UCI compliant. The
resulting shape is stiffer and lighter than a full aero tube and
more aerodynamic than a round tube.
Aero Alloy Frame
Tube profile has up to a 20% increase in aerodynamic performance
over an equivalent round tube. Also an average
5% decrease in power output over a stage.
Aero fork
Similar shape and aerodynamic performance as the Foil
fork but with a hybrid carbon/alloy construction. Aero
profiles were also used for carbon fork legs.
SPEEDSTER 2010
SPEEDSTER 2013
Stiffness and Stress
Around a 6% increase in BB stiffness due to the use of
FO1 tube profiles. Local peak stresses are also reduced.
Internal Cable Routing
Clean look and increased aerodynamic performance.
Internal Down Tube routing with integrated guide at the
BB and cable stops at the Head Tube. Top Tube cable
routing uses a uninterrupted full length cable outer.
2013 BIKES 114 ACCESSORIES