a current specification sheet and capacity chart - Ogie's Lift Truck ...

JCB LOADALL | 531-70, 535-140 HiViz, 550-140, 550-170 SPEC
TOOLCARRIER
TELESCOPIC
HANDLERS

JCB LOADALL | 531-70
MAX. PAYLOAD:
MAX. LIFT HEIGHT:
6000lbs (2722kg)
23ft (7.0 meters)
JCB LOADALL | 531-70
STATIC DIMENSIONS
Machine model 531-70
ft-in (m)
A Overall height 8-2 (2.49)
B Overall width (over tires)* 7-4 (2.23)
C Inside width of cab 3-1 (0.94)
D Front track 5-11 (1.81)
E Wheelbase 9-0 (2.75)
F Overall length to front tires 14-4 (4.38)
*Dependant upon tire specified.
Machine model 531-70
ft-in (m)
G Overall length to front carriage 16-4 (4.99)
H Ground clearance 1-4 (0.40)
Outside turn radius (over tires) 12-2 (3.70)
Weight lb (kg) 15215 (6900)
Tires 15.5/80-24
Helping You Get
the Job Done!

JCB LOADALL |
535-140 HiViz
MAX. PAYLOAD:
MAX. LIFT HEIGHT:
8000lb (3175kg)
45ft 2in (13.78 meters)
A
C
JCB LOADALL | 535-140 HiViz
H
D
J
E
K
B
G
F
STATIC DIMENSIONS
Machine model
535-140 HiViz
ft-in (m)
A Overall height 8-6 (2.59)
B Overall width (over tires)* 7-9 (2.35)
C Inside width of cab 3-1 (0.94)
D Front track 6-3 (1.90)
E Wheelbase 9-0 (2.75)
F Overall length to front tires 15-7 (4.74)
G Overall length to front carriage 20-5 (6.23)
H Ground clearance 1-4 (0.40)
J Front wheel center to carriage 6-11 (2.11)
Machine model
535-140 HiViz
ft-in (m)
K Rear wheel center to rear face 4-6 (1.37)
Overall width with stabilizers fully deployed 8-5 (2.57)
Outside turn radius (over tires) 12-4 (3.75)
Bucket roll back angle @ ground level degrees 37
Bucket dump angle @ boom fully raised degrees 12.5
Weight lb (kg) 23986 (10880)
Tires 15.5/80-24
*Dependent upon tire specified.
Helping You Get
the Job Done!

JCB LOADALLS | 550-140
MAX. PAYLOAD:
MAX. LIFT HEIGHT:
10000lbs (4535kg)
44ft 3in (13.5 meters)
A
C
140
JCB LOADALLS | 550-140
H
D
E
B
F
G
STATIC DIMENSIONS
Machine model 550-140
ft-in (m)
A Overall height 8-6 (2.59)
B Overall width (over tires)* 7-9 (2.35)
C Inside width of cab 3-1 (0.94)
D Front track 6-3 (1.90)
E Wheelbase 9-6 (2.90)
F Overall length to front tires 17-0 (5.18)
*Dependant upon tire specified.
Machine model 550-140
ft-in (m)
G Overall length to front carriage 20-6 (6.25)
H Ground clearance 1-4 (0.40)
Outside turn radius (over tires) 13-5 (4.10)
Weight lb (kg) 23934 (10858)
Tires 15.5-25
Helping You Get
the Job Done!

JCB LOADALLS | 550-170
MAX. PAYLOAD:
MAX. LIFT HEIGHT:
10000lbs (4535kg)
54ft 9in (16.7 meters)
A
C
JCB LOADALLS | 550-170
H
D
E
B
G
F
STATIC DIMENSIONS
Machine model 550-170
ft-in (m)
A Overall height 8-10 (2.69)
B Overall width (over tires)* 8-0 (2.44)
C Inside width of cab 3-1 (0.94)
D Front track 6-3 (1.90)
E Wheelbase 9-0 (2.75)
F Overall length to front tires 16-8 (5.08)
*Dependant upon tire specified.
Machine model 550-170
ft-in (m)
G Overall length to front carriage 20-10 (6.36)
H Ground clearance 1-4 (0.40)
Outside turn radius (over tires) 13-5 (4.1)
Weight lb (kg) 26810 (12160)
Tires
17.5-25 16PR
Helping You Get
the Job Done!

JCB LOADALLS | 531-70
JCB LOADALLS | 531-70
Chassis Levelling (Sway)
With stabilizers retracted (Sway angle ±9°)
LIFT PERFORMANCE – 531-70 SWAY FRAME
Maximum lift capacity lb (kg) 6000 (2722)
Lift capacity to full height lb (kg) 6000 (2722)
Lift capacity at full reach lb (kg) 3000 (1250)
Lift height ft-in (m) 23-0 (7.0)
Reach at maximum lift height ft-in (m) 2-0 (0.61)
Maximum forward reach ft-in (m) 12-2 (3.84)
Complies with stability test ASME B56.6
Helping You Get
the Job Done!

0
0
JCB LOADALLS | 535-140 HiViz
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
14
13
12
11
10
9
8
7
6
5
8,000 lbs
7,000 lbs
6,000 lbs
5,000 lbs
4,000 lbs
20°
30°
40°
50°
60°
70°
74°
7
6
5
4
3
2
1
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
13
12
11
10
9
8
7
6
5
5,000 lbs
4,000 lbs
3,000 lbs
2,000 lbs
20°
30°
40°
50°
60°
69°
7
6
5
4
3
2
1
6,000 lbs
7,000 lbs
JCB LOADALLS | 535-140 HiViz
4
4
12
3,000 lbs
12
1,000 lbs
8,000 lbs
10
8
3
10°
10
8
3
10°
6
4
2
2,000 lbs
24"
6
4
2
500 lbs
24"
1
1
2
0
0°
2
0
0°
2
2
-4°
1
11
10
9
8
7
6
5
4
3
2
1
0
Metres
1
12
11
10
9
8
7
6
5
4
3
2
1
0
Metres
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Feet
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Feet
Chassis Leveling (Sway)
With stabilizers retracted (Sway angle ±9°)
LIFT PERFORMANCE – STABILIZERS EXTENDED
With Stabilizers Extended
Maximum lift capacity lb (kg) 8000 (3629)
Lift capacity to full height lb (kg) 7000 (3175)
Lift capacity at full reach lb (kg) 2000 (907)
Lift height ft-in (m) 45-2 (13.78)
Reach at maximum lift height ft-in (m) 3-0 (0.93)
Maximum forward reach ft-in (m) 31-6 (9.60)
Reach with 1 ton load ft-in (m) 31-6 (9.60)
Placing height ft-in (m) 43-8 (13.30)
Complies with stability test ASME B56.6
LIFT PERFORMANCE – STABILIZERS RETRACTED
With Stabilizers Retracted
Maximum lift capacity lb (kg) 8000 (3629)
Lift capacity to full height lb (kg) 3000 (1361)
Lift capacity at full reach lb (kg) 500 (227)
Lift height ft-in (m) 44-2 (13.47)
Reach at maximum lift height ft-in (m) 6-4 (1.94)
Maximum forward reach ft-in (m) 31-10 (9.70)
Reach with 1 ton load ft-in (m) 21-8 (6.61)
Placing Height ft-in (m) 42-9 (13.02)
Complies with stability test ASME B56.6
Helping You Get
the Job Done!

JCB LOADALLS | 550-140
48
42
36
30
24
18
12
6
0
3
69 o
7
0 o 5
4
2
1
0
20 o
10
24”
2,500 lbs
4,000 lbs
6,000 lbs
8,000 lbs
10,000 lbs
48
42
36
30
24
18
12
6
0
3
69 o
7
0 o 5
4
2
1
0
20 o
10
24”
1,250 lbs
2,500 lbs
4,000 lbs
6,000 lbs
8,000 lbs
10,000 lbs
JCB LOADALLS | 550-140
36
30
24
18
12
6
0 FT
36
30
24
18
12
6
0 FT
Chassis Levelling (Sway)
With stabilisers retracted (Sway angle ±9°)
LIFT PERFORMANCE – 550-140 STABILIZERS DOWN
With Stabilizers Down
Maximum lift capacity lb (kg) 10000 (4535)
Lift capacity to full height lb (kg) 10000 (4535)
Lift capacity at full reach lb (kg) 2500 (1133)
Lift height ft-in (m) 44-3 (13.50)
Reach at maximum lift height ft-in (m) 5-6 (1.71)
Maximum forward reach ft-in (m) 30-8 (9.39)
Complies with stability test ASME B56.6
LIFT PERFORMANCE – 550-140 STABILIZERS UP
With Stabilizers Up
Maximum lift capacity lb (kg) 10000 (4535)
Lift capacity to full height lb (kg) 6000 (2721)
Lift capacity at full reach lb (kg) 1250 (567)
Lift height ft-in (m) 44-3 (13.50)
Reach at maximum lift height ft-in (m) 5-6 (1.71)
Maximum forward reach ft-in (m) 30-8 (9.39)
Complies with stability test ASME B56.6
Helping You Get
the Job Done!

JCB LOADALLS | 550-170
54
48
42
36
30
24
18
12
6
0
18
15
12
9
6
3
73 o
70 o
60 o
50 o
40 o
30 o
20 o
10 o
0 o
-1 o
0
1,000 lb
2,000 lb
3,000 lb
4,000 lb
5,000 lb
6,000 lb
8,000 lb
10,000 lb
24"
10
9
8
7
6
5
4
3
2
1
0
54
48
42
36
30
24
18
12
6
0
18
15
12
9
6
3
0
30 o
20 o
10 o
0 o -4 o
40 o
0 lb
70 o
60 o
50 o
500 lb
1,000 lb
2,000 lb
3,000 lb
4,000 lb
6,000 lb
8,000 lb
10,000 lb
24"
6
5
4
3
2
1
0
0
JCB LOADALLS | 550-170
0.5
12
9
6
3
0
Metres
0.5
12
9
6
3
0
Metres
42
36
30
24
18
12
6
0
Feet
42
36
30
24
18
12
6
0
Feet
Chassis Levelling (Sway)
With stabilizers retracted (Sway angle ±9°)
LIFT PERFORMANCE – 550-170 STABILIZERS DOWN
With Stabilizers Down
Maximum lift capacity lb (kg) 10000 (4535)
Lift capacity to full height lb (kg) 5000 (2269)
Lift capacity at full reach lb (kg) 1000 (453)
Maximum lift height ft-in (m) 54-9 (16.70)
Reach at maximum lift height ft-in (m) 6-8 (2.03)
Maximum forward reach ft-in (m) 41-5 (12.60)
Placing Height ft-in (m) 53-2 (16.20)
Complies with stability test ASME B56.6
LIFT PERFORMANCE – 550-170 STABILIZERS UP
With Stabilizers Retracted
Maximum lift capacity lb (kg) 10000 (4535)
Lift capacity to maximum lift height lb (kg) 3000 (1361)
Lift capacity at full reach lb (kg) 0 (0)
Maximum lift height ft-in (m) 42-10 (13.06)
Reach at maximum lift height ft-in (m) 7-0 (2.13)
Maximum forward reach ft-in (m) 30-0 (9.14)
Placing Height ft-in (m) 35-9 (10.90)
Complies with stability test ASME B56.6
Helping You Get
the Job Done!

JCB LOADALLS | 531-70, 535-140 HiViz, 550-140, 550-170
ENGINE - JCB DIESELMAX
Latest technology and advanced design provides low fuel consumption, reduced noise, high torque and power output,
total reliability and minimal maintenance.
Two-stage, dry type air filter with primary and safety elements. EPA Tier III emissions compliant.
Machine Model 531-70 535-140 HiViz/550-140/550-170
Displacement in 3 (ltr) 269 (4.4) 269 (4.4)
No. of cylinders 4 4
Aspiration Turbo Turbo
Power rating
Power @ 2200rpm HP (kW) 85 (63.0) 100 (74.2)
Torque rating
Torque @ 1200rpm lbf ft (Nm) 267 (362)
Torque @ 1300rpm lbf ft (Nm) 324 (440)
TRANSMISSION
JCB powershift transmission incorporating torque converter, bevel box and a 4 speed powershift gearbox in one
resiliently mounted unit.
A combined steering column mounted switch incorporating directional control and 4 forward and 4 reverse
powershift gears.
Travel speed 16 mph (25kph), optional 20.5 mph (33kph). For 531-70, 17 mph (28kph), 20 mph (32kph) with 2/4 WD
Front and rear drive axles: JCB epicyclic hub reduction drive/steer axles with Max-Trac torque proportioning differentials.
Permanent 4 wheel drive.
BRAKES
Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-immersed multi-disc type on front and rear axle.
Parking brake: Hand operated disc brake on output of gearbox.
Boom is manufactured from high tensile steel.
Low maintenance, hard wearing pads.
JCB Q-fit self-levelling carriage with lever operated pin locking accepts pallet forks and a wide range of attachments.
One boom end auxiliary hydraulic service fitted as standard.
Fitted to carriage tilt, telescopic and boom lift cylinders.
BOOM AND CARRIAGE
SAFETY CHECK VALVES
JCB LOADALLS | 531-70, 535-140 HiViz, 550-140, 550-170
Helping You Get
the Job Done!

JCB LOADALLS | 531-70, 535-140 HiViz, 550-140, 550-170
SERVICE CAPACITIES
Machine Model 531-70 535-140/550-140 550-170
Fuel tank US gal (liters) 39.1 (148) 33 (125) 33 (125)
Hydraulic tank US gal (liters) 29.9 (113) 34.6 (131) 39.6 (150)
Coolant US gal (liters) 6.1 (23) 6.1 (23) 6.1 (23)
STEERING
Hydrostatic power steering. (531-70 comes w/ power track rods on both axles)
Three steer mode options: front wheel steer; all wheel steer; crab steer: operated from in the cab by a selection lever.
OPTIONS AND ACCESSORIES
Options: Front and rear working lights, industrial tires, electrical 2/4WD select, radio kit, air conditioning, air suspension
seat, delux cab trim, windshield and roof guard.
Attachments: Contact your local dealer for details of the comprehensive range.
HYDRAULICS
ELECTRICS
12 v negative earth. 850 CCA battery. 95 amp alternator. Full road lighting. Reversing light. Direction indicators. Hazard
warning. Reverse alarm.
Quiet safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round. Laminated roof
screen. Roof bars, front, rear and roof screen wiper/washer and heater/screen defroster. Opening rear window.
Audio-visual warning system for coolant temperature, engine oil pressure, air cleaner, battery charge, transmission oil,
water in fuel temperature and pressure. Hourmeter and road speed indicator. Engine temperature, fuel gauge and
inclinometer.
Adjustable steer column with stalk bar powershift change and forward reverse shuttle. Throttle and brake pedal.
Adjustable suspension seat with adjacent mechanically activated park brake. Includes leveling inclinometer. Safety canopy as
above but with side glass and roof glass only (screen wiper and heater/screen defroster not applicable).
Two stage gear pump with suction strainer and filter. 531-170 535-140 550-140 550-170
Operating system pressure psi (bar) 3550 (241) 3770 (260) 3500 (241) 3770 (260)
Pump flow US gal/min (ltrs/min) 21.6 (82) 29 (110) 29 (110)
Hydraulic Cycle Times Seconds Seconds Seconds Seconds
Boom raise 7.2 9.9 14.2
Boom lower 5.4 7.6 11.9
Extend 6.8 22.3 22.3
Retract 5.0 18.6 18.6
Bucket dump 3.5 2.2 2.4 4.7
Bucket crowd 2.9 2.9 3.2 5.1
Boom raise and extend 41.8
Boom lower and retract 33
CAB
JCB LOADALLS | 531-70, 535-140 HiViz, 550-140, 550-170
Helping You Get
the Job Done!

JCB | HEAVY TELESCOPIC HANDLERS
A GLOBAL COMMITMENT TO QUALITY
JCB’s total commitment to its products and customers has helped it grow from a one-man
business into one of the world’s largest manufacturers of backhoe loaders, crawler
excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks,
rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors.
By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in the world.
By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.
And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the
best customer support in the industry.
Through setting the standards by which others are judged, JCB has become one of the world’s
most impressive success stories.
JCB TELESCOPIC HANDLERS | 531-70, 535-140, 550-140, 550-17
2201
JCB Headquarters Savannah, 2000 Bamford Blvd., Pooler, GA 31322. Tel: 912.447.2000. Fax: 912.447.2299. www.jcb.com
JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.
Helping You Get
the Job Done!