SMT8585-05H03 LF - BeStar Acoustic Components
SMT8585-05H03 LF - BeStar Acoustic Components
SMT8585-05H03 LF - BeStar Acoustic Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPECIFICATION<br />
FOR ELECTRO-MAGNET TRANSDUCER<br />
TOTAL PAGE 08 www.be-star.com RoHS<br />
Customer<br />
Model Name<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
Customer P/N<br />
Product No.<br />
050229<br />
Date<br />
20 Mar. 09<br />
Issue No.<br />
BS/TET01.568A<br />
Page<br />
01 of 08<br />
Issue Date<br />
09/03/20<br />
Approval:<br />
1.Characteristics<br />
2.Dimension<br />
3.Reliability Test<br />
4.Surface Mounting Condition<br />
5.Soldering Pattern<br />
6.Tape on Reel Packing<br />
7.Notice<br />
8.History change record<br />
Drawn by<br />
Checked by<br />
Approved by<br />
Customer approved<br />
魏 奉 玲<br />
徐 波<br />
陶 红 仲<br />
BESTAR ELECTRONICS INDUSTRY CO.,LTD<br />
No.199 HuangHe West Road.New district,ChangZhou,JiangSu Province,P.R.China<br />
Tel: +86 519 88222567 Fax: +86 519 88222551<br />
E-mail:wu@be-star.com http://www.be-star.com
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
H<br />
G<br />
F<br />
E<br />
D<br />
6 5 4 3 2 1<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
1. Characteristics<br />
1.1 Features<br />
1. SMD;thinner , smaller size<br />
2. High S.P.L.; and clear sound<br />
3. Reflowable;RoHS complant<br />
4. Tape & Reel supply<br />
5. Minimum quantity (one reel): 1000 pcs.<br />
1.2 Electrical and Mechanical Characteristics<br />
No. Item Specifications<br />
1 Rated Voltage 5Vo-p<br />
2 Operating Voltage 4...6 Vo-p<br />
3 Current Max.80mA<br />
4 Sound Output (at 10cm) Min.85dB<br />
5 Rated Frequency 2731Hz<br />
6 Coil Resistance 32± 5 ohm<br />
7 Operating Temp. -40...+85°C<br />
8 Storage Temp. -40...+85°C<br />
9 Weight Max 0.5g<br />
※Current/Sound Output:value applying rated voltage<br />
1.3 Test method:<br />
1.31.Recommended Circuit<br />
(2731Hz,1/2 duty,square wave)<br />
the following are examples of externally driven circuits.<br />
1.32.Standard text Fixture<br />
No reaction in space with in 400mm in all direction<br />
H<br />
G<br />
F<br />
E<br />
D<br />
C<br />
Square<br />
signal<br />
generator<br />
red<br />
black<br />
1.0K<br />
Ec+<br />
8050 buzzer<br />
400mm<br />
Sounder<br />
100mm<br />
C<br />
B<br />
B<br />
A<br />
Date:<br />
09/03/20<br />
Drawn by:<br />
魏 奉 玲<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Checked by:<br />
Approved by:<br />
徐 波<br />
陶 红 仲<br />
6 5 4<br />
www.be-star.com wu@be-star.com<br />
3 2<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
Transducer<br />
DRG NO: BS/TET01.568A Page:2 of 8<br />
1<br />
A
6 5 4 3 2 1<br />
H<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
1.4 Frequency Response(Square wave 5Vo-p 10cm)<br />
H<br />
100<br />
G<br />
G<br />
90<br />
F<br />
Sound Pressure Level (dB)<br />
80<br />
F<br />
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
E<br />
D<br />
70<br />
60<br />
200 400 500 600 700 800 900 1000 2000 3000<br />
2.Dimension<br />
4-1.6<br />
+<br />
3.0<br />
4000 5000<br />
Frequency (Hz)<br />
8.5<br />
E<br />
D<br />
C<br />
8.5<br />
C<br />
Tolerance: 0.2mm<br />
B<br />
B<br />
Date:<br />
Drawn by:<br />
09/03/20<br />
魏 奉 玲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Checked by:<br />
Approved by:<br />
徐 波<br />
陶 红 仲<br />
Transducer<br />
A<br />
6<br />
5<br />
www.be-star.com wu@be-star.com<br />
4 3<br />
DRG NO: BS/TET01.568A<br />
2<br />
Page:3 of 8<br />
1
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
H<br />
G<br />
F<br />
E<br />
D<br />
C<br />
B<br />
6 5 4 3 2<br />
1<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
3.Reliability Test<br />
3.1 High temp. storage life test<br />
Temperature<br />
+85°C<br />
Duration<br />
240hrs<br />
3.2 Low temp. storage life test<br />
Temperature<br />
-40°C<br />
Duration<br />
240hrs<br />
3.3 Life test in normal temperature<br />
Power supply<br />
Rated voltage<br />
Duration<br />
96hrs<br />
3.4 Temperature shock test<br />
Cycles 14<br />
-40 C<br />
30min<br />
+25 C<br />
15min<br />
3.5 Humidity cycle test<br />
Cycles 10<br />
25 C 90-95% RH<br />
+85 C<br />
30min<br />
+25 C<br />
15min<br />
65 C 90-95% RH<br />
10h 1h 12h 1h<br />
3.6 High temp. life test<br />
Temperature<br />
+85°C<br />
Duration<br />
96hrs<br />
3.7 Low temp. life test<br />
Temperature<br />
-20°C<br />
Duration<br />
96hrs<br />
All these tests above should be measured after leaving normal temperature for 4hrs.<br />
3.8 Vibration Test<br />
Vibration Frequency<br />
50~100~50Hz<br />
Time<br />
15min<br />
Acceleration<br />
5g<br />
Direction<br />
x.y &z 2h (total 6hrs)<br />
3.9 Drop test<br />
Height<br />
150cm(drop to concrete floor)<br />
Direction<br />
one time in each 6 planes(total of 6 times)<br />
3.10Solderability<br />
Temperature of soldering pot 250°C ± 5<br />
Duration<br />
2 ± 0.5sec<br />
3.11Pin lead strength<br />
Force<br />
10N<br />
Duration<br />
10 ± 1sec<br />
Notice: All specification must be satisfied in this condition except SPL. SPL shall be 83dB or more.<br />
H<br />
G<br />
F<br />
E<br />
D<br />
C<br />
B<br />
Date:<br />
Drawn by:<br />
09/03/20<br />
魏 奉 玲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Checked by:<br />
Approved by:<br />
徐 波<br />
陶 红 仲<br />
Transducer<br />
A<br />
6<br />
5 4<br />
DRG NO: BS/TET01.568A<br />
www.be-star.com wu@be-star.com<br />
3 2<br />
Page:4 of 8<br />
1
6 5 4 3 2 1<br />
H<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
4.Surface Mounting Condition<br />
H<br />
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
G<br />
F<br />
E<br />
D<br />
C<br />
In automated mounting of The SMD Sound Transducers on printed circuit boards,any bending,expanding and<br />
pulling forces or shocks against the SMD Sound Transducers shall be kept minimum to preven them from<br />
electrical failures and mechanical damages of the devices.<br />
Soldering(Reflow)<br />
(1)Solderings of The SMD Sound Transducers shall conform to the soldering conditions in the individual<br />
specifications.<br />
(2)The SMD Sound Transducers are designed for"Reflow Solderings"<br />
(3)In the reflow solderings,too high soldering temperatures and too large tempearture gradient such as rapid<br />
heating or cooling may cause electrical failures and mechanical damages of the devices.<br />
Follwing soldering conditions are recommend;Refer to Fig.1<br />
Temperature [ ℃]<br />
300<br />
250<br />
200<br />
150<br />
100<br />
50<br />
0<br />
Temperature profile for a lead-free reflow process<br />
min.190℃<br />
ramp up to<br />
150℃<br />
min.3k/s<br />
0 50 100<br />
min.300s<br />
min.110s<br />
Fig. 1 Recommended soldering Temperature-Time profile (Reflow soldering)<br />
2.1<br />
T(solid)min.217℃<br />
150 200 250 300 350<br />
time [s]<br />
5.0<br />
max.260 ℃<br />
2.1<br />
min.40s<br />
max.90s<br />
max.255℃<br />
ramp down<br />
from T(solid)<br />
min.6k/s<br />
Notice: All specification must be satisfied in this condition except SPL. SPL shall be 83dB or more.<br />
5.Soldering Pattern<br />
400<br />
G<br />
F<br />
E<br />
D<br />
C<br />
4-R1.0<br />
5.0<br />
2.1<br />
B<br />
2.1<br />
B<br />
4-Solder Pads<br />
Date:<br />
Drawn by:<br />
09/03/20<br />
魏 奉 玲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Checked by:<br />
Approved by:<br />
徐 波<br />
陶 红 仲<br />
Transducer<br />
A<br />
6 5<br />
4<br />
www.be-star.com wu@be-star.com<br />
3 2<br />
DRG NO: BS/TET01.568A<br />
Page:5 of 8<br />
1
6 5 4 3 2 1<br />
H<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
6. Tape on Reel Packing<br />
6.1 packing drawing<br />
Dimensions of carrier tape<br />
H<br />
G<br />
4.0 0.1<br />
2.0 0.1<br />
0<br />
1.5 +0.1<br />
B<br />
1.75±0.1<br />
7.5±0.1<br />
B-B<br />
G<br />
F<br />
A<br />
A<br />
16 0.3<br />
9.0±0.1<br />
F<br />
0.3 0.05<br />
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
E<br />
D<br />
C<br />
9.0 0.1<br />
A-A<br />
Dimensions of reel<br />
13 0.2<br />
Max. 5°c<br />
12.0 0.1<br />
3.2 0.1<br />
22.4Max.<br />
330 Max<br />
Diameter<br />
B<br />
Min. 1.5<br />
The cover film peel strength force 0.1-0.7N<br />
The cover film peel speed 300mm/min.<br />
<strong>Components</strong><br />
Cover Film<br />
E<br />
D<br />
C<br />
240~280<br />
B<br />
1.6±0.2<br />
16.4<br />
100 0.5<br />
Empty<br />
Trailer160-200<br />
400-560 Leader<br />
B<br />
Date:<br />
Drawn by:<br />
09/03/20<br />
魏 奉 玲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Checked by:<br />
Approved by:<br />
徐 波<br />
陶 红 仲<br />
Transducer<br />
A<br />
6<br />
5<br />
4<br />
www.be-star.com wu@be-star.com<br />
3<br />
DRG NO: BS/TET01.568A<br />
2<br />
Page:6 of 8<br />
1
6 5 4 3 2 1<br />
H<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
H<br />
label about order info<br />
G<br />
G<br />
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
F<br />
E<br />
D<br />
C<br />
B<br />
6.2 packing quantity<br />
6.2.1 1000pcs/reel<br />
6.2.2 5reels/carton<br />
6.2.3 5000 pcs/carton in total<br />
6.2.4 carton size 38x28x37cm<br />
6.2.5 12cartons/tray<br />
6.2.6 tray size 85x77x74cm<br />
7.Notice<br />
7.1 The products mustn't be washed<br />
7.2 Storage Condition<br />
The products should be stored in the room ,where the temperature/humidity is stable. And<br />
avoid such places where there are large temperature changes. Please store the products at<br />
the following conditions:<br />
Temperature: -10 to + 40 C Humidity: 15 to 85% R.H.<br />
7.3 Expire Date on Storage<br />
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a<br />
sealed and an unopened package. Please use the products within six months after deliveried.<br />
If you store the products for a long time (more than six months), use carefully because the<br />
products may be degraded in the solderability and/or rusty.Please confirm solderability and<br />
characteristics for the products regularly.<br />
7.4 Notice on Product Storage<br />
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic<br />
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be d-<br />
egraded in the solderability due to the storage in a chemical atmosphere.<br />
(2) Please use the products immediately after the package is opened, because the characteristics<br />
may be reduced at quality, and/or be degraded in the solderability due to storage under<br />
the poor condition.<br />
F<br />
E<br />
D<br />
C<br />
B<br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Date:<br />
Drawn by:<br />
Checked by:<br />
Approved by:<br />
09/03/20<br />
魏 奉 玲<br />
徐 波<br />
陶 红 仲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
Transducer<br />
A<br />
6<br />
5<br />
4<br />
www.be-star.com wu@be-star.com<br />
DRG NO: BS/TET01.568A Page:7 of 8<br />
3 2<br />
1
6 5 4 3<br />
2<br />
1<br />
H<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
8. History change record<br />
H<br />
version<br />
No.<br />
Before<br />
Change Items<br />
After<br />
Date Drawn Approved<br />
G A<br />
09/03/20 魏 奉 玲 陶 红 仲<br />
G<br />
F<br />
F<br />
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.<br />
and shall not be used in whole or in part without its written content<br />
E<br />
D<br />
E<br />
D<br />
C<br />
C<br />
B<br />
B<br />
A<br />
A<br />
Rev.<br />
09/03/20<br />
Date<br />
魏 奉 玲<br />
Drawn<br />
Note<br />
Date:<br />
Drawn by:<br />
Checked by:<br />
Approved by:<br />
09/03/20<br />
魏 奉 玲<br />
徐 波<br />
陶 红 仲<br />
<strong>SMT8585</strong>-<strong>05H03</strong> <strong>LF</strong><br />
Transducer<br />
A<br />
6<br />
5<br />
4<br />
www.be-star.com wu@be-star.com<br />
3<br />
DRG NO: BS/TET01.568A Page:8 of 8<br />
2 1