Download the Telford Copper Cylinders Brochure

Tristor Renewable
Hot water at mains pressure without a pressurised cylinder!
Thermal stores do not require G3 Building Control Notification and no special qualifications are
required to install the cylinder.
Our popular Tristor is now available in stainless steel, suitable for use with Solar, Underfloor
Heating and a conventional Boiler with an immersion heater for back up.
The Tristor renewable has been developed to utilise the benefits of solar energy. This sealed
system is suitable where the provision for a feed and expansion tank is impractical.
At the heart of the unit is the same Tristor TM technology for proven hot water performance.
• Unique design
• High flow rates
Domestic Hot Out
• Thermostatically blended hot water at 51°c
• High efficiency - low heat loss
1” Boiler Flow
• Easy to install and commission
28mm Connection
• Stylish appearance
Solar Sensor Blind
Pocket
Boiler Stat
Blind Pocket
The position of the tappings will vary
depending on the size and type of store
and heat source(s) to be used in addition
to solar.
Dimensions are quoted in mm for
guidance only.
Telford Specialise in producing bespoke
cylinders to meet any requirements for more
info please call our technical department.
Capacity (ltr) Height Diameter
200 1750 510
280 2000 555
Dimensions are for use as guideline only.
Under Floor
Flow 1”
Boiler Return 2
3Kw Immersion
Heater
22mm Solar Flow
Solar Sensor
Blind Pocket
28mm Connection
Domestic Cold
Mains Inlet
Solar Return
1” Return
Under Floor
Return
32
Final.indd 32 1/6/09 15:19:4