DEWE-3020 - DEWETRON Download Center
DEWE-3020 - DEWETRON Download Center
DEWE-3020 - DEWETRON Download Center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
All-In-One<br />
<strong>DEWE</strong>-<strong>3020</strong><br />
Most portable all-in-one instrument<br />
8 isolated DAQP or 16 differential MDAQ analog inputs<br />
Simple expansion to 16 isolated DAQP modules<br />
3 PCI slots for A/D and other cards (1394, ARINC, 1553…)<br />
15.4” TFT wide-screen display with touch-screen<br />
Choose from two models<br />
Add your choice of signal conditioning,<br />
A/D board(s) and software to complete these systems<br />
<strong>DEWE</strong>-<strong>3020</strong> series<br />
Input specifications <strong>DEWE</strong>-<strong>3020</strong> <strong>DEWE</strong>-3021<br />
Slots for DAQ or PAD modules 8 -<br />
Expansion connector for additional 8 channels 1 -<br />
MDAQ input channels - Up to 16<br />
Main system 1)<br />
Total PCI slots 1 full length / 2 half length 3 half length<br />
Hard disk<br />
Data throughput<br />
Power supply<br />
Display<br />
Processor<br />
RAM<br />
Ethernet<br />
1000 GB<br />
Typ. 80 MB/s<br />
95 to 260 V AC<br />
15.4“ TFT wide-screen display with touch-screen, 1280 x 800 pixel<br />
Intel ® Core i5/i7<br />
3 GB<br />
10/100/1000 BaseT<br />
USB interfaces 3<br />
RS-232 interface 1<br />
Storage drive<br />
Internal DVD +/-RW burner<br />
Operating system Microsoft ® WINDOWS ® 7<br />
Dimensions (W x D x H)<br />
377 x 168 x 284 mm (14.8 x 6.6 x 11.2 in.)<br />
Weight Typ. 8.5 kg (18 lb.) Typ. 8 kg (17 lb.)<br />
Environmental specifications<br />
Operating temperature 0 to +50 °C, down to -20 °C with prewarmed unit<br />
Storage temperature -20 to +70 °C<br />
Humidity<br />
Vibration 2)<br />
Shock 2)<br />
1)<br />
Please find current specifications in the latest price list<br />
2)<br />
Tested with Solid State Disk<br />
Additional interfaces and sensors<br />
10 to 80 % non cond., 5 to 95 % rel. humidity<br />
MIL-STD 810F 514.5, procedure I<br />
MIL-STD 810F 516.5, procedure I<br />
Measurements are not limited to just classic analog and digital signals. Please find further detailed information to<br />
expand your system in the chapter “Components”.<br />
Needed to complete the system<br />
<strong>DEWE</strong>-ORION “A/D Boards” offer simultaneous sampled<br />
analog inputs, synchronous digital I/Os, high-performance<br />
counters and high-speed CAN interfaces. DAQP or MDAQ<br />
signal amplifiers and software are needed as well.<br />
Options to expand the system<br />
Add further “Interface Cards” like ARINC-429, 1553,<br />
PCM telemetry, FireWire ® and analog output or special<br />
“Sensors” like synchronized video, industrial encoders<br />
(RIE-360) or GPS.<br />
Software Components Signal Conditioning Front-ends Instruments Dedicated Instruments <strong>DEWE</strong>2<br />
A/D card DAQP/MDAQ<br />
<strong>DEWE</strong>Soft<br />
<strong>DEWE</strong>-30-8-EXP VIDEO FlexRay<br />
www.dewetron.com/dewe-<strong>3020</strong><br />
107
<strong>DEWE</strong>-<strong>3020</strong><br />
<strong>DEWE</strong>-<strong>3020</strong><br />
<strong>DEWE</strong>-<strong>3020</strong><br />
Most flexible model, prepared for DAQP isolated analog input<br />
amplifier modules. DAQP conditioners offer highest bandwidth,<br />
great accuracy, different input ranges and integrated<br />
filters. Besides the single channel modularity – a module easily<br />
can be changed by the user at any time – the main advantage<br />
of these modules is the high galvanic isolation which<br />
ensures safe measurements, high quality results and make<br />
them almost indestructible. See chapter “Signal Conditioning”<br />
for details.<br />
Max. channel count<br />
ANALOG<br />
DIGITAL<br />
8 DAQ modules<br />
I/O card & counter & CAN<br />
<strong>DEWE</strong>-3021<br />
BNC configuration<br />
<strong>DEWE</strong>-3021<br />
Version for sensor input via differential MDAQ analog input<br />
amplifiers. MDAQ modules are available in cost efficient<br />
and space saving 8-channel blocks. See chapter “Signal<br />
Conditioning” for details.<br />
DSUB-9 configuration<br />
Max. channel count<br />
ANALOG<br />
DIGITAL<br />
16 MDAQ channels<br />
I/O card & counter & CAN<br />
Mixed layout<br />
In case a 16 channel <strong>DEWE</strong>-ORION series A/D board is<br />
installed inside the <strong>DEWE</strong>-<strong>3020</strong>, the system can be expanded<br />
to 16 isolated DAQP modules easily. Just add a <strong>DEWE</strong>-30-8-<br />
EXP expansion unit by a convenient single cable connection.<br />
Max. channel count<br />
ANALOG<br />
DIGITAL<br />
16 DAQ modules<br />
I/O card & counter & CAN<br />
<strong>DEWE</strong>-<strong>3020</strong> with <strong>DEWE</strong>-30-8-EXP<br />
(16 DAQP modules in total)<br />
Adding more counters or digital inputs<br />
Especially many automotive applications require multiple<br />
counter inputs, e.g. for connecting wheel pulse transducers.<br />
By choosing a suitable <strong>DEWE</strong>-ORION series A/D board up to<br />
10 counters per card are available. The connectors for attaching<br />
the sensors are placed on the sidepanel near the analog<br />
inputs.<br />
<strong>DEWE</strong>-3021 with<br />
4 encoder inputs<br />
108<br />
www.dewetron.com
All-In-One<br />
System options and upgrades for <strong>DEWE</strong>-<strong>3020</strong> series<br />
Options<br />
FIREWIRE-1394<br />
<strong>3020</strong>-PS-BAT<br />
<strong>3020</strong>-DC-UPS<br />
<strong>3020</strong>-CB8-BNC<br />
<strong>DEWE</strong>-30-8-EXP<br />
Upgrades<br />
HDD-1000-SSD-256<br />
Option <strong>3020</strong>-PS-BAT<br />
Optional battery power supply<br />
This option turns your <strong>DEWE</strong>-<strong>3020</strong> into a fully battery powered instrument. The hotswappable<br />
batteries guarantee continuous operation without an external power<br />
source. The instrument provides 2 slots for BAT-95WH batteries and can be operated<br />
for up to ~3 hours with 2 batteries installed. Since this time depends a lot on<br />
the system configuration a <strong>DEWE</strong>Soft plugin shows the battery status directly in<br />
the software. Also alarm conditions can be set and the battery parameters can be<br />
displayed as additional measurement channels. Operating temperature is limited to<br />
0 .. 45° C when batteries are charged.<br />
Option <strong>3020</strong>-DC-UPS<br />
This option changes the power supply of the instrument to a wide range 10 .. 32 V DC<br />
input with internal UPS battery for approx. 5 minutes. That power supply is ideally<br />
suited for automotive applications as it can handle 12 V DC<br />
as well as 24 V DC<br />
and the<br />
internal battery nicely bridges the voltage drop during start of the engine.<br />
<strong>DEWE</strong>-UPS-300-DC<br />
Description<br />
PCI Firewire IEEE-1394 interface for the <strong>DEWE</strong>-<strong>3020</strong><br />
Battery power supply with UPS function, 18 .. 24 V DC<br />
non-isolated input, incl. external AC adaptor,<br />
2 slots for hot-swappable batteries, 2 batteries for appr. 3 hours operation included<br />
Power supply 10 to 32 V DC<br />
with internal UPS battery and external AC adaptor,<br />
incl. 2 m DC connection cable to banana jacks<br />
Connection block with 8 BNC sockets, for simple signal connection of single-ended channels 8 to 15<br />
of <strong>DEWE</strong>-<strong>3020</strong> systems<br />
<strong>DEWE</strong>-<strong>3020</strong> expansion, 8 additional amplifier slots for CH 8-15,<br />
only one cable for power supply, RS-485 and analog channels, incl. 2 m connection cable<br />
Description<br />
Upgrade to 256 GB flash disk (replaces 1000 GB hard disk),<br />
max. data throughput 40 MB/s<br />
The <strong>DEWE</strong>-UPS-300-DC is an external DC uninterruptible power supply with up to<br />
four internal high capacity batteries. It can be used to power instruments with wide<br />
range DC input for hours. A typical <strong>DEWE</strong>-<strong>3020</strong> with option <strong>3020</strong>-DC-UPS can be<br />
operated for approx. 5 hours using <strong>DEWE</strong>-UPS-300-DC. In addition the batteries are<br />
hot-swappable and so enable you to run the instrument infinitely by changing batteries<br />
every few hours. External battery chargers are available, too. If the <strong>DEWE</strong>-UPS-<br />
300-DC is externally powered it also serves as a multi-battery charger.<br />
Popular accessory, car seat mounting kit for the <strong>DEWE</strong>-<strong>3020</strong> platform<br />
The <strong>3020</strong>-CSMK1 is a welded metal construction and comes with heavy duty straps<br />
for the car seat and the <strong>DEWE</strong>-<strong>3020</strong> itself.<br />
<strong>DEWE</strong>-<strong>3020</strong> with opened<br />
battery compartment<br />
<strong>3020</strong>-DC-UPS<br />
<strong>DEWE</strong>-UPS-300-DC<br />
Software Components Signal Conditioning Front-ends Instruments Dedicated Instruments <strong>DEWE</strong>2<br />
<strong>3020</strong>-CSMK1<br />
109
<strong>DEWE</strong>-<strong>3020</strong><br />
Channel Expansion<br />
Signal conditioning for slow signals is added by connecting EPAD2 series modules<br />
to the systems EPAD interface.<br />
For expanding the number of dynamic channels there some choices:<br />
EPAD2-TH8<br />
Analog cable: Additional A/D boards<br />
are installed into the basic instrument<br />
and external signal conditioning, e.g.<br />
DAQ modules in a <strong>DEWE</strong>-30 chassis,<br />
is connected by means of an analog<br />
signal cable.<br />
analog<br />
<strong>DEWE</strong>-30-16<br />
<strong>DEWE</strong>-30-16<br />
PCI expansion: A PCI-HOST card is<br />
installed into the basic instrument and<br />
external signal conditioning, e.g. DAQ<br />
modules in a <strong>DEWE</strong>-50 chassis, is connected<br />
by means of a PCI cable.<br />
PCI<br />
<strong>DEWE</strong>-50-32<br />
<strong>DEWE</strong>-NET: Several instruments are connected<br />
via Ethernet. Each unit requires<br />
an ORION-SYNC option. For short distances<br />
a sync cable is used if the units<br />
are far from each other a sync interface<br />
like <strong>DEWE</strong>-CLOCK is used.<br />
ethernet<br />
<strong>DEWE</strong>-3021<br />
<strong>3020</strong>-CB8-BNC<br />
and <strong>3020</strong>-CB8-B<br />
connection blocks<br />
PS-BAT<br />
Battery power supply<br />
<strong>DEWE</strong>-30-8-EXP<br />
8 additional amplifier slots<br />
15.4“ touch-screen<br />
The carrying bag is<br />
included as standard<br />
accessory<br />
<strong>DEWE</strong>-31-16<br />
<strong>DEWE</strong>-POWERBOX-12<br />
DC Power distribution box<br />
Optional battery charger<br />
(range: 90 to 260 V AC<br />
)<br />
DVD-BURNER<br />
for data backup to DVD<br />
or CD<br />
Internal 256 GB Solid State<br />
Disk for maximum reliability<br />
<strong>DEWE</strong>TRON GmbH • Parkring 4 • A-8074 Graz-Grambach • Tel (0043) 316 3070 0 • Fax (0043) 316 3070 90 • sales@dewetron.com<br />
110<br />
www.dewetron.com
Change language