LP30 Magnetic Linear Position Sensor - GSNA.com

More documents

Recommendations

Info

LP30 Non Contacting Linear Boom Measurement Non wire Reel Boom Measurement The use of a magnetic strip attached to the boom as it extends allows for elimination of the wire reel version of boom measurement. Typical Reel system failures eliminated with new design •No Stainless Steel wire to break and retract into housing •Elimination of ice on reel and wire caking with ice •Elimination of water ingression into the reel and freeze •Bolt on Magnetic strips- 100% potted in a sealed Aluminum housing. •Sealed Sensor assembly either Analog or J1939 CAN communication. • Sensor range from Magnet ½ inch gap with +/- ½ inch of variation of center of sensor to center of magnet strip . • Zero point feature allows for easy calibration in home condition.
LP30 Magnetic Linear Position Sensor Magnets – Potted and Sealed in a Aluminum Strip Sealed LP30 Boom Magnet Strip The boom magnetic strip comes in 1, 3, and 5 foot lengths . The lengths can be interconnected to achieve a continuous run of magnets. The resolution of boom measurement is ½ the distance between the spacing of the magnets. Currently, ½ inch resolution is standard with 1 inch gap between magnets. Sensor/Strip Installation •Variations of +/- ½ inch vertically allows for extreme boom dynamics. •Allowance of ½ gap of sensor to magnetic strip allows for “slop” in boom tolerances to be inconsequential. • Resolution no dependent on Reel Length. ½” or ¼ Inch as specified. Magnets (Sealed in potting compound) Dual Haul Effect Sensors !!!!!!!!!!!!WARNING!!!!!!!!!!!! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCT AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE This document and other information from GS North America LLC its subsidiaries and authorized distributors provide product and/or system options for further investigations by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure, and review the information concerning the products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by GS North America LLC and its subsidiaries at any time without notice
Page 1: OVERVIEW LP30 Magnetic Linear Posit

LP30 Magnetic Linear Position Sensor - GSNA.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?