2. Occupational safety / Security - Wenk Lab Tec

More documents

Recommendations

Info

2. Occupational safety / Security Transport/Trolleys GENERAL CATALOGUE EDITION 17 1 1 Laboratory trolleys Hard-wearing, sturdy, PE-HD construction resists chemicals and routine knocks and scratches in use, ensuring a long working life. Advantages: - stable and high load bearing capacity - high density polyethylene - long life - easy to assemble without screws - not electrically conductive - legs and bases can be recycled -easy to clean - top tray has integral handles -hygienic Langkavel Type Colour Description Width Length Height PK Cat. No. mm mm mm WT 26 WT 34 WT 42 Cabinet beige beige beige beige 2 trays 3 trays 3 trays suitable for WT 460 460 460 460 610 610 610 610 660 860 1060 660 1 1 1 1 9.148 200 9.148 212 9.148 216 9.148 203 26, 34 and 42 Further colours available on request. 2 2 Bowl trolleys Trolley - Blue-grey solid rubber (non-marking) tyres - Welded frame for 85 or 100 litres platic bowls - Dimensions frame (L x W x H): approx. 750 x 490 x 720mm - Height with red bowl approx. 760mm, with white bowl approx. 840mm - 4 swivel castors with 75mm diam. - ball bearing mounted - powder coated Bowl, red -PE-LD - 85 litres - Overall Dimensions (L x W x H): approx. 780 x 530 x 350mm Bowl, white -PE-LD - Tapering sides - 100 litres - Overall Dimensions (L x W x H): approx. 895 x 530 x 375mm NEW! Gorr GmbH & CO.KG Description Colour Width Length Height PK Cat. No. mm mm mm Trolley Bowl Bowl black-silver red white 750 780 895 490 630 530 720 350 375 1 1 1 9.148 300 9.148 301 9.148 302 3 3 Trolley, Multiboy Practical trolley for safe transport in the laboratory. Stable, two tier, steel frame with push-handle and 4 castors (2 of which can be locked). With 600 x 400mm top shelf and transport box on bottom shelf (capacity 23 litres). Dimensions (WxDxH): Height above ground, bottom tray: Height above ground, top tray: Castor Ø: Capacity: 410 x 660 x 820mm 130mm 500mm 75mm top shelf: 25kg base shelf: 50kg Type PK Cat. No. Multiboy 1 9.733 670 Trolley, Multiboy, trays Waterproof plastic tray bottom for the Unilab "Multiboy" trolley. Both sides coated in 4mm (400x600mm) thick melamine resin. Type PK Cat. No. 230 Trolley, Multiboy, trays 1 9.733 672 E & OE. www.wenk-labtec.com
GENERAL CATALOGUE EDITION 17 2. Occupational safety / Security Transport/Trolleys-Radiation protection/Radiation shielding Trolley, Multiboy, accessories Transport boxes for the Unilab "Multiboy" trolley. Dimensions (WxDxH): 400 x 600 x 110mm (approx. 23-litre capacity) and 400 x 600 x 330mm (approx. 60-litre capacity). Capacity PK Cat. No. L 23.0 60.0 1 1 9.733 668 9.733 669 1 Trolleys, stainless steel Strong, welded chrome-nickel steel shelves. The shelves have raised profile edges. With four 125mm, swivelling, antistatic castors, two of which have locks. Other sizes available on request. 1 Type Width Depth Height PK Cat. No. mm mm mm MSW 8 x 5/2 - 2 shelves MSW 8 x 5/3 - 3 Shelves 900 900 600 600 950 950 1 1 9.148 101 9.148 104 Beta radiation shielding Beta radiation shielding protects against low energy Beta rays. They reduce the radiation exposure when using isotopes such as 32P, 14C or 35S to values below the designated limit. It is proven that protection equipment made of acrylic with a density of 1.15g/cm³ and a material thickness of 6.9mm effectively stops Beta particle radiation. These products have a thickness of minimum approx. 10mm and therefore offer the best protection against low-level Beta radiation. Label "Caution: Radioactive material" in German supplied with every article. Warning: Acrylic does not provide protection against x-rays or gamma radiation. 2 Benchtop beta shield Made of transparent plexiglass. With angled top. Firm and stable. One-piece construction. 10 mm thick. Large base prevents radioactive substances from reaching the benchtop and transmitting radiation downwards through the work surface. Other sizes and models available on request. 2 Width Depth Height PK Cat. No. mm mm mm 350 460 290 300 500 610 1 1 9.194 300 9.194 305 Benchtop beta shield, U-shaped Made of transparent plexiglass, 10 mm thick. Self-supporting, can be used both as beta safety shield and waste container safety shield and protection hood for work with dangerous reagents. Can be used together with product numbers 9.194 300 and 9.194 305 to provide excellent all-round protection. Width Depth Height PK Cat. No. mm mm mm 360 470 190 250 500 610 1 1 9.194 310 9.194 311 3 3 Beta test tube racks Constructed from a solid block of transparent Plexiglas, with lid. Provide maximum protection when handling high activity solutions. Array format 4 x 6 = 24 wells. Dimensions (Lx W): 150 x 110mm For Width Length Height PK Cat. No. tubes ml mm mm mm 0.5 0.7 1.5 0.7 / 1.5 / 2.0 110 110 110 110 150 150 150 150 40 40 60 60 1 1 1 1 9.194 335 9.194 336 9.194 337 9.194 338 E & OE. www.wenk-labtec.com 231
Page 1 and 2:
GENERAL CATALOGUE EDITION 17 2. Occ
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14: GENERAL CATALOGUE EDITION 17 2. Occ
Page 23 and 24: KIMTECH SCIENCE* Gloves. All-round
Page 27 and 28: GENERAL CATALOGUE EDITION 17 1 Biog
Page 29 and 30: GENERAL CATALOGUE EDITION 17 Gloves
Page 37 and 38: GENERAL CATALOGUE EDITION 17 1 Prot
Page 39 and 40: GENERAL CATALOGUE EDITION 17 1 Heat
Page 51 and 52: GENERAL CATALOGUE EDITION 17 Refill
Page 63: GENERAL CATALOGUE EDITION 17 2. Occ
Page 87: GENERAL CATALOGUE EDITION 17 Access
show all

2. Occupational safety / Security - Wenk Lab Tec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?