Zack Virtual Brochure

DoveBid
Worldwide
Amsterdam
Atlanta
Austin
Bangkok
Birmingham
Boston
Brussels
Chicago
Dallas
Denver
Detroit
Dublin
Frankfurt
Hartford
Hong Kong
Houston
Lincoln
London
Los Angeles
Melbourne
Mexico City
Minneapolis
New York
Paris
Portland
Sacramento
San Francisco
San Jose
Santa Fe
Seattle
Singapore
St. Louis
Sydney
Tokyo
Toronto
Tucson
2-Day DoveBid ®
On-Location Auction
By order of the Board of Directors, for the benefit of the Secured Creditors of
THE
ZACK
CO.
2 Complete Sheet Metal
Fabricating Facilities
July 16 & 17, 2003 • 10am ET
Flint & Saginaw, Michigan
®
www.industrialauctioneers.org
www.dovebid.com

2-Day On-Location Auction
By order of the Board of Directors,
for the benefit of the Secured Creditors of
THE ZACK COMPANY
July 16 & 17, 2003
Beginning at 10am ET each day
2-Day Preview
July 15 & 16, 2003
9am to 4pm ET and mornings of sale
Auction & Preview Locations
Day 1 • July 16, 2003
4401 Western Road • Flint, Michigan
Day 2 • July 17, 2003
200 Lee Street • Saginaw, Michigan
Directions
To Day 1 • Flint, Michigan Auction &
Preview Location From I-75 North
Proceed on I-75 North to I-475 North
(U.A.W. Freeway) (Exit #111). Proceed on
I-475 North approx. 10 miles to Stewart
Avenue (Exit #9). After exiting expressway,
turn right (east) onto East Stewart Ave. and
proceed to North Dort Highway/MI-54.
Turn right onto North Dort Hwy./MI-54
and proceed approx. 1/2 mile to Richfield
Rd. Turn left (east) and proceed 3/10 mile
to Western Road. Turn left (north) and
proceed approx. 2/10 mile to sale site on
the left. Watch for auction & parking signs.
To Day 2 • Saginaw, Michigan Auction
& Preview Location From the Flint,
Michigan Auction & Preview Location
Proceed back to I-75 North. Proceed on
I-75 North approx. 30 miles to Holland
Road West (Exit 149B). After exiting
expressway, proceed on Holland Rd. West
approx. 5 miles to South Niagara Street.
Turn left (south) and proceed 2/10 mile to
Lee Street. The sale site is located on the
southeast corner of Lee and South Niagara
Streets. Watch for auction & parking signs.
Additional Information
• A buyer’s premium will apply at this sale
• The auction will be conducted in English and
will accept only U.S. currency
2
Auctioneer’s
Note
DoveBid is pleased
to have been
selected by The
Zack Company to
conduct this 2-Day
On-Location
Auction of
2 Complete Sheet
Metal Fabricating
Facilities. The
auction will feature
a wide range of
quality equipment,
including:
• Pacific Hydraulic
Press Brake
• Welty-Way
Notching,
Shearing &
Cut-To-Length
System
• (2) Vicon Dual
Plasma Cutting
Systems (2001)
The On-Location
Auction will be
conducted onsite
only with a preview
of the assets being
held on July 15 &
16, 2003 from
9am to 4pm ET.
Feel free to attend
the preview or visit
our website at
www.dovebid.com
to download the
auction catalog.
Please remember
that assets are sold
as is, where is, and
with all faults when
participating in an
auction. Buyers are
responsible for
removal of assets
and all shipping
and rigging
charges.
Thank you in
advance for your
interest and we
look forward to
seeing you on
auction day.
Day 1 • Flint, Michigan
PACIFIC J-SERIES 225-TON X 16’
HYDRAULIC PRESS BRAKE
DREIS & KRUMP CHICAGO MODEL 510-D
150-TON X 14’ POWER PRESS BRAKE
CINCINNATI MODEL 1810 10’ X 1/4”
POWER SQUARING SHEAR
PRESS BRAKES
1 – PACIFIC J-SERIES 225-TON X 16’ HYDRAULIC
PRESS BRAKE, S/N 9472, Distance Between
Housings 14-1/2’, Fine Tilt Adjustment, Front
Operated Power Back Gage, Cybelec DNC-60-PS
PLC Control, Foot & Palm Button Controls
1 – DREIS & KRUMP CHICAGO 510-D 150-TON X 14’
POWER PRESS BRAKE, S/N P-7813, Bed Length
170”, Distance Between Housings 127”, Motorized
Ram Adjustment, Auto Lubrication
1 – DREIS & KRUMP CHICAGO 10’ POWER PRESS
BRAKE, Bed 8” X 127”, 127” Between Housings
To view a complete asset list, visit our website @ www.dovebid.com

Day 1 • Flint, Michigan Location
GEKA HYDRACROP 70/S
70-TON IRONWORKER
WEBB MODEL 6L 6’2” X 1/2” INITIAL-TYPE
POWER BENDING ROLL
KLING VERTICAL BENDING ROLL
WELTY-WAY NOTCHING, SHEARING & CUT-TO-LENGTH SYSTEM
FECO MODEL 15 ROTO-DIE
HYDRAULIC BENDER
SHEARS
1 – CINCINNATI MODEL 1810 10’ X 1/4” POWER
SQUARING SHEAR, S/N 26895, Table Size 21” X
127”, Throat 18”, Front Operated Power Back Gage,
10’ Squaring Arm, 7-1/2-HP Motor
1 – 12’ POWER SQUARING SHEAR, Bed Size 23” X
152”, Throat 25”, Rear-Oper. Manual Back Gage
NOTCHING &
CUT-TO-LENGTH SYSTEM
1 – WELTY-WAY NOTCHING, SHEARING & CUT-TO-
LENGTH SYSTEM, Consisting of: Sleal Line 60”
5-Station Uncoiling System, S/N 66501; Threading
Ramp, With Entry Rolls; 4-Station Notcher; Pneumatic
Shear, 3-Station Edger System; Lockformer Layout
Stand, With Auxiliary Edger & Stand; Control Console
LION MACHINERY MODEL 1836-0
36” X 18-GA CLEAT FOLDER
IRONWORKERS
1 – GEKA HYDRACROP MODEL
70/S 70-TON HYDRAULIC
IRONWORKER, S/N 6014, 90°
Notcher 10” X 10” X 1/4”
2 – KLING IRONWORKERS,
(1) NO. 4, S/N 466214, With
Capacities: Punch 13/16” to
3/4”, Shearing Plate 1/2”, Flat
Bar 5/8” to 6”, Round Bar
1-3/4”, Square Bar 1-1/2”,
(1) NO. 3, S/N 3375, With
Capacities: Punch 5/8” to 1/2”,
Shear 4” X 4” X 1/4”, Plate 3/8”,
Round Bar 1-3/8”, Square Bar
1-1/4”, Bar 4” X 1/2”
BENDING ROLLS
1 – WEBB MODEL 6L 6’2” X 1/2” INITIAL-TYPE
POWER BENDING ROLL, S/N 56273, Roll
Diameter 9”, Power Drop End, 10-HP Motor
1 – WYSONG & MILES MODEL 860 5’ INITIAL-
TYPE POWER BENDING ROLL, S/N N/A, Roll
Diameter 5”, Manual Drop End, 5-HP Motor,
Allen-Bradley Powerflex Control
1 – LOCKFORMER 4’ INITIAL-TYPE POWER
BENDING ROLL, S/N 88137, Roll Diameter 3”,
Manual Drop End
1 – KLING VERTICAL BENDING ROLL, S/N
390641, Roll Dia. 12”, Roll Width 6”, 10-HP
ROLL FORMERS
1 – LOCKFORMER 14-GA ROLL FORMING
MACHINE
1 – LOCKFORMER 5’ DOUBLE-SIDED ROLL
FORMING MACHINE
CLEAT FOLDER & FORMER
1 – LION MACHINERY 1836-0 36” X 18-GA
CLEAT FOLDER
1 – LOCKFORMER 22-GA CLEAT FORMER
FABRICATING EQUIPMENT
1 – FECO MODEL 15 ROTO-DIE HYDRAULIC
BENDER, S/N 81634, Bed Length 10’, 15-HP
2 – DREIS & KRUMP CHICAGO MODEL 816 8’ X
16-GA HAND BENDING BRAKES
2 – DREIS & KRUMP CHICAGO HAND BOX &
PAN BRAKES, (1) MODEL BPU 412-6 4’ X
12-GA, (1) SIZE L-31 4’
1 – ROTEX 18-STATION HAND C-FRAME PUNCH
1 – MAPLEWOOD D-18 CIRCLE FORMER, 1-HP
1 – LOCKFORMER 18-GA EDGE NIBBLER
3
To schedule an auction, call our Southfield, MI Office • Phone 248.353.8640

Day 1 • Flint, Michigan Location
2001
VICON DUAL TWIN DRIVE AUTOMATED
PLASMA CUTTING SYSTEM
PETERBILT TANDEM-AXLE
DIESEL TRUCK TRACTOR
1985
GMC BRIGADIER TANDEM-AXLE
DIESEL TRUCK TRACTOR
2001 1995 & 1999
MILLER SYNCROWAVE 300
WELDING POWER SOURCE
CHEVROLET SUBURBAN LS 4-DOOR
SPORT UTILITY VEHICLE
CHEVROLET CHEYENNE 2500
& SILVERADO 2500 3/4-TON PICKUP TRUCKS
4
PLASMA CUTTERS
1 – VICON DUAL TWIN DRIVE
AUTOMATED PLASMA CUTTING
SYSTEM, S/N VM1441 (2001),
Work Area 6’ X 20’, Innerlogic Model
SR-100i 100-Amp Power Source,
Thermal Dynamics Drag-Gun
Plasma Cutter With Built-In Air,
High Definition System, Air Tak
Refrigerated Compressed Air
Dryer, Gateway Celeron Personal
Computer, Innerlogic Inova
Precision Arc Voltage Control
6 – THERMAL ARC PLASMA
CUTTING SYSTEMS,
(2) PAK-3XR, S/Ns M50704A13012,
M50703A18301B,
(1) PAK-22, S/N B71610A177023B,
(3) PAK-10, S/Ns E10908A177028J,
(2) S/N N/A
SPOT WELDER
1 – WESTERN ARCTRONICS 30-KVA
ROCKER ARM SPOT WELDER,
Throat 24”
BAND SAWS
1 – MARVEL SERIES 8 MARK I 18”
UNIVERSAL METAL CUTTING
BAND SAW, Table 33” X 42”
1 – WELLSAW MODEL 8 10” X 16”
HORIZONTAL METAL CUTTING
BAND SAW
COLD SAWS
1 – 32” COLD SAW, With Power Vise
1 – TOMAT T350 14” MITER COLD
SAW, S/N 44298 (1998)
1 – BEWO 9” MITER COLD SAW
(44) WELDERS
1 – MILLER SYNCROWAVE 300 300-AMP AC/DC
GAS TUNGSTEN ARC OR SHIELDED ARC
WELDING POWER SOURCE
6 – MILLER MP-30E 300-AMP CP/DC WELDING
POWER SOURCES, Miller S-22A Wire Feed
12 – MILLER SRH-333 300-AMP DC ARC
WELDERS
8 – HOBART RC-300 300-AMP WIRE FEED
WELDERS
5 – AIRCO SQUAREWAVE 300-AMP AC/DC
HELIWELDERS
2 – MILLER DIALARC HF 250-AMP CC AC/DC
WELDING POWER SOURCES (BOTH 1989)
2 – MILLER BOBCAT 225-AMP 8000-WATT
CC/CV AC/DC WELDING GENERATORS
(BOTH 1998), With Onan Performer 16-HP
Gasoline Engine
2 – MILLER AEAD-200LE 200-AMP DC/225-AMP
AC CC AC/DC WELDING GENERATORS
(BOTH 1989), With Onan Performer 18XSL
18-HP Gas-Powered Engine
1 – LINCOLN RANGER 8 200-AMP DC/225-AMP
AC LPG WELDING GENERATOR (1998),
With Kohler Command 20-HP LPG Engine
2 – CANOX C-MARKVIII-2 DC POLYWELD
SYSTEMS
3 – MILLER DC POLYWELD SYSTEMS
MISC. MACHINERY
1 – DURO DYNE FG-1 AUTOMATIC INSERTION
RIVETER
1 – IOWA PRECISION MODEL NS GLUE
APPLICATION MACHINE, With Insulmatic
Controller
1 – BURGMASTER TURRET DRILLING,
TAPPING & BORING MACHINE, Table
21” X 24”, Spindle Speeds 275 to 1355 RPM
PAINT SPRAY BOOTH
1 – FREE-STANDING DRY FILTER PAINT SPRAY
BOOTH, Booth Size 30’W X 6’D X 10’H, Blower
& Exhaust System
TRUCK TRACTORS
1 – 1985 GMC BRIGADIER TANDEM-AXLE DIESEL
TRUCK TRACTOR, V/N 1GDT9C4JXGVS03924,
Detroit Diesel Silver 92 350-HP Diesel Engine,
Fuller Road Ranger 9-Speed Transmission,
GVWR 50,000-Lbs.
1 – 1982 PETERBILT TANDEM-AXLE DIESEL
TRUCK TRACTOR, Caterpillar Diesel Engine,
Eaton Fuller 13-Speed Transmission, GVWR
80,000-Lbs.
(18) TRAILERS
1 – 1978 FONTAINE 45’ TANDEM-AXLE
DROP-DECK TRAILER
1 – 1968 FRUEHAUF FB8-F2-40 40’ TANDEM-AXLE
ALUMINUM VAN BODY STORAGE TRAILER
1 – STRICK MODEL 7400S33NSWG 40’ TANDEM-
AXLE STORAGE TRAILER
1 – BROWN 40’ TANDEM-AXLE STORAGE
TRAILER
12 – ASSORTED TANDEM-AXLE STORAGE
TRAILERS
2 – 10’ X 40” TANDEM-AXLE OFFICE TRAILERS
STAKE TRUCK
1 – 1995 GMC 3500 HD-SL 1-TON SINGLE-AXLE
DIESEL STAKE TRUCK,
V/N 1GDKC34FXRJ524615, 6.5L Turbo Diesel,
Automatic Transmission, 14’ Bed
MINI VAN
1 – 2000 CHEVROLET VENTURE MINI VAN, 3400
SFI V-6, Automatic Transmission
To view a complete asset list, visit our website @ www.dovebid.com

Day 1 • Flint, Michigan Location
BRODERSON CARRY DECK CRANES
PICKUP TRUCKS
3 – CHEVROLET PICKUP TRUCKS, (1)
1999 SILVERADO 2500 3/4-TON, With
5.3L Gas Engine, (1) 1995 CHEYENNE
2500 3/4-TON, With 5.7L Gas Engine,
(1) 1986 CUSTOM DELUXE 10 1/2-TON,
With 4.3L V-6 Gas Engine, All With
Automatic Transmission
1 – 1994 GMC 1500SL 1/2-TON PICKUP
TRUCK, 5.0L Gas Engine, Auto. Trans.
SUVs
2 – CHEVROLET 4-DOOR SPORT UTILITY
VEHICLES, (1) 2001 SUBURBAN LS,
With 5.3L Gas Engine, (1) 1994
SUBURBAN 1500, 5.7L Gas Engine,
Both With Automatic Transmission
ELECTRIC CARTS
1 – TAYLOR & DUNN MODEL B2-48
ELECTRIC CART, S/N 126446
3 – E-Z-GO 4-WHEEL ELECTRIC GOLF
CARTS
CARRY DECK CRANES
4 – BRODERSON CARRY DECK CRANES,
All With Hydraulic Outriggers,
(2) 1C801B 17,000-LB. LPG, S/Ns 893B,
871B, Maximum Boom Extension 30’,
(1) 1C701A 12,000-LB. CAPACITY LPG,
S/N 269B, Max. Boom Extension 36’5”,
(1) 1C70B 12,000-LB. GAS, S/N 386B,
Maximum Boom Extension 36’5”
SIDE LOADER
1 – RAYMOND 76-SL100TF 10,000-LB.
CAP. ELECTRIC NARROW AISLE SIDE
LOADER, S/N 0166, Lift 228”, 36-Volt
FORKLIFTS
1 – CLARK MODEL C500-S100 10,000-LB.
LPG FORKLIFT TRUCK, S/N
685-91-1195-379T, Lift 114”, Solid Tires,
Overhead Guard
1 – LIFT-ALL MODEL FWD-80-D 8000-LB.
4-WHEEL DRIVE DIESEL FORKLIFT
TRUCK, S/N 793937, Lift 12’, Side Shift,
Pneumatic Tires
1 – YALE GLP060TFNUAE085 6000-LB.
CAPACITY LPG FORKLIFT, S/N
E177B16969U (1997), Lift 181”, Side
Shift, Cushion Tires
1 – HYSTER H50XL 5500-LB. CAP. LPG
FORKLIFT TRUCK, S/N AITIB14641G
(1986), Lift 130”, Cushion Tires
RAYMOND 76-SL100TF 10,000-LB. CAP.
ELECTRIC NARROW AISLE SIDE LOADER
AERIAL WORK PLATFORMS
1 – MARK INDUSTRIES MARKLIFT-CH20NEP 800-LB.
CAP. ELECTRIC SCISSOR-LIFT AERIAL WORK
PLATFORM, S/N 244513, Max. Platform Height 20’
1 – STRATO-LIFT KRX 750-LB. ELECTRIC SCISSOR
LIFT AERIAL WORK PLATFORM, Max. Height 20’
AUTOMATIC STORAGE SYSTEM
1 – REMSTAR SHUTTLE 500-1850X863-NT AUTOMATIC
STORAGE SYSTEM, S/N 00.007398/006 (2000),
Maximum Shelf Load 20,000-kG, PLC Control
SHOP & FACTORY
1 – JOY MODEL GOI500S22A1DB TRAILER-MOUNTED
GAS-POWERED AIR COMPRESSOR, S/N 134323
1 – CLEMCO MODEL 1648 30 CF PORTABLE ABRASIVE
BLAST MACHINE, S/N 31366
1 – DAKE 50H 50-TON H-FRAME HYDRAULIC PRESS
1 – RIDGID 500 POWER PIPE THREADER
20 – SECTIONS OF DBL. SIDED CANTILEVER RACKING
Lifts, Tools, Hoists, Ladders, Supplies, Tooling, Laser
Alignment Tool, Fasteners, Drills, Grinders, Etc.
COMPUTER & OFFICE EQUIPMENT
8 – PENTIUM III PERSONAL COMPUTERS, (5) GATEWAY,
(2) HEWLETT-PACKARD VECTRA, (1) KAYAK-XM600
1 – COMPAQ LAPTOP COMPUTER
1 – HEWLETT-PACKARD DESIGNJET 2500CP PLOTTER
5 – HEWLETT-PACKARD LASERJET 2100 PRINTERS
1 – HEWLETT-PACKARD PRINTER/SCANNER/COPIER
1 – ZEBRA Z4000 LABEL PRINTER
1 – CANON PC-921 COPIER
1 – K & E 3036 IMAGING SYSTEM
TV, VCR, Desks, Credenzas, Conference & Office Tables,
Drafting Tables, Chairs, File Cabinets, Etc.
RAW MATERIAL INVENTORY
VERY LARGE QUANTITY OF RAW MATERIAL, Including:
Stainless Steel Stock: Round & Square Bar, Tube;
Galvanized Steel Stock: Sheet, Angle, Flange; Hot-Rolled
Steel Stock: Round, Square & Flat Bar, Angle, Channel,
Tube, Pipe to 20’ Lengths, -Aluminum Stock: Sheet, Round
& Flat Bar, Angle, Channel, I-Beam, Pipe, Extrusions;
Painted Sheet, Structural Steel, Rods, Bolts, Nuts, Washers,
Rivets, Clips, Shims, Fittings, Louvers, Dampers, Etc.
LIFT-ALL FWD-80-D 8000-LB. 4-WHEEL DRIVE
DIESEL-POWERED FORKLIFT TRUCK
VERY LARGE QUANTITY
OF RAW MATERIAL
2000
REMSTAR SHUTTLE
500-1850X863-NT AUTOMATIC
STORAGE SYSTEM
NEED HELP WITH FINANCING
As a courtesy to our buyers, DoveBid can provide contact information
for companies offering leasing and/or financing services.
For details, please visit DoveBid’s Website at www.dovebid.com
or call our customer service department at 800.665.1042
5
To schedule an auction, call our Southfield, MI Office • Phone 248.353.8640

Day 2 • Saginaw, Michigan Location
WYSONG MODEL 150-10
150-TON X 10' POWER PRESS BRAKE
PEXTO MODEL 14-U-10B
10' X 14-GA POWER SQUARING SHEAR
LOWN MODEL B700 6'
INITIAL-TYPE POWER BENDING ROLL
1997
1998
LINCOLN RANGER WELDING GENERATOR
& MILLER SYNCROWAVE WELDER
PLASMA CUTTERS
1 – VICON DUAL TWIN DRIVE AUTOMATED
PLASMA CUTTING SYSTEM, S/N VM1440
(2001), Work Area 5' X 20', Innerlogic SR-100i
100-Amp Power Source, Air Tak Refrigerated
Compressed Air Dryer, Gateway Celeron PC,
Innerlogic Inova Precision Arc Voltage Control
1 – ESAB-HEATH GXAC 600 PLASMA CUTTING
SYSTEM, Work Area 5' X 10', Hypertherm
Maximum 100 Power Supply, S/N 70-3888
1 – THERMAL DYNAMICS CUTMASTER 100
PLASMA CUTTING SYSTEM, S/N EN50192
(2002)
PRESS BRAKES
2 – WYSONG POWER PRESS BRAKES,
(1) MODEL 150-10 150-TON X 10', S/N
PB41-177, With Bed Length 12', (1) 110-10
110-TON X 10', S/N PB48-132, With Bed Length
14' With Left Side Extension, Both With Distance
Between Housings 126", Throat 9", Stroke 3",
Maximum Die Space 12", Slide Adjustment 5",
Motorized Ram Adjustment
1 – DREIS & KRUMP CHICAGO 100-TON X 10'
CAPACITY POWER PRESS BRAKE, Distance
Between Housings 104", Throat 8", Motorized
Ram Adjustment
SHEARS
1 – BERTSCH 10' X 16-GA POWER SQUARING
SHEAR, S/N M-9800, Table 21" X 128", Throat
24", 80" Squaring Arm
3 – PEXTO POWER SQUARING SHEARS, (1)
MODEL 14-U-10B 10' X 14-GA, S/N 655313, With
Table Size 19" X 140", (2) 20" Squaring Arms,
Rear-Operated Manual Back Gage, (2) MODEL
10-U-10B 10' X 10-GA, S/N 700989 With (2) 3'
Squaring Arms, S/N 711101, Both With Table 19"
6 X 148", Front-Operated Power Back Gage
IRONWORKERS
1 – MUBEA KBL SIZE 11 55-TON
UNIVERSAL IRONWORKER,
S/N 783, Capacities: Round Bar
1-3/8", Shear 5" X 1/2"
1 – PEDDINGHAUS MOD. 210/11
44-TON UNIV. IRONWORKER,
S/N F12875, Capacities: Flat
Shear 3" X 5/8" to 6" X 1/2",
Punching 2-3/4" Diameter
BENDING ROLLS
4 – LOWN INITIAL-TYPE POWER
BENDING ROLLS,
(1) MODEL B700 6', S/N BN23,
Capacity 1/4" to 3/16", Roll
Diameter 7", 5-HP Motor,
(1) MODEL B600 5', S/N
B6194, Roll Diameter 6",
(1) MODEL G500 4', S/N 5240,
Capacity 3/16" to 5/32", Roll
Diameter 5", 3-HP Motor,
(1) MODEL B400 4', S/N
B4693, Capacity 12 to 14-Ga,
Roll Diameter 4", 2-HP Motor,
All With Manual Drop End
1 – PEXTO MODEL 416-E 3' X
16-GA INITIAL-TYPE POWER
BENDING ROLL, S/N 3/62, Roll
Dia. 3", Manual Drop End, 2-HP
ROLL FORMERS
2 – LOCKFORMER 20-GA ROLL
FORMING MACHINES
2 – FLAGLER ROLL FORMING
MACHINES, (1) R658 18-GA,
(1) 16-R1062 16-GA
1 – LOCKFORMER 10-STAND
DBL. SIDED ROLL FORMING
MACHINE
TRAILMOBILE 45' TANDEM-AXLE
ALUMINUM VAN BODY TRAILERS
FABRICATING EQUIPMENT
1 – FECO ROTO-DIE MODEL 10 HYDRAULIC
BENDER, Length 10'
3 – DREIS & KRUMP CHICAGO HAND BENDING
BRAKES, (1) SIZE 1016 10' X 16-GA, (1) SIZE
1014 10' X 14-GA, (1) SIZE 516 5' X 16-GA
1 – DREIS & KRUMP CHICAGO SIZE W31 4' HAND
BOX & PAN BRAKE
1 – LOCKFORMER 18-GA AUTO GUIDE FLANGER
1 – NIAGARA 172 20-18-16-GA SHEET FORMER
1 – ENGEL 750-2 EDGE NOTCHING MACHINE
1 – ENGEL 10101-MMP NOTCHING UNIT
1 – PULLMAX TYPE P5 C-FRAME NIBBLER
(15) WELDERS
3 – LINCOLN RANGER 8 225-AMP GAS-POWERED
WELDING GENERATORS (ALL 1997), Kohler
20-HP Gas Engine, (1) Trailer-Mounted
1 – MILLER SYNCROWAVE 351 350-AMP CC AC/DC
WELDING POWER SOURCE (1997), With Miller
Watermate 1A Cooling System
1 – MILLER MP-30 300-AMP CP/DC ARC WELDING
POWER SOURCE, With Wire Feed
1 – MILLER 330A/BP 300-AMP AC/DC GAS
TUNGSTEN ARC WELDING POWER SOURCE
1 – HOBART TG-301 300-AMP ARC WELDER
1 – MILLER MODEL CP-252TS 250-AMP CV/DC
WELDING POWER SOURCE (1996), Wire Feed
6 – MILLER CP-250TS 250-AMP CP/DC ARC
WELDING POWER SOURCES, (1) (1997),
(1) (1991), All With Miller Wire Feed
1 – AIRCO 2.5DTR-224-A 250-AMP CV/DC WIRE
FEED WELDER
SPOT WELDER
1 – REX TYPE FRV-10 10-KVA ROCKER ARM SPOT
WELDER, S/N 5358, Throat 18"
To view a complete asset list, visit our website @ www.dovebid.com

Day 2 • Saginaw, Michigan Location
2002
CHEVROLET SILVERADO 2500HD
3/4-TON PICKUP TRUCK
BAND SAWS
1 – DOALL METALMASTER 36"
VERTICAL CONTOUR METAL
CUTTING BAND SAW, Table 30-1/2"
X 30-1/2", Blade Speeds 50 to 1600
FPM, Blade Welder/Grinder
1 – DOALL C4 9" X 12" HORIZONTAL
METAL CUTTING BAND SAW,
3/4-HP Motor, Coolant System
MISC. MACHINERY
1 – ELLIS 12000 16" VARIABLE SPEED
FLOOR-TYPE DRILL, Table 14" X 16"
1 – GLASS MASTER GROOV-MASTER
E215T GROOVING MACHINE
1 – DURO-DYNE FG-1 AUTOMATED
RIVETER
1 – LOCKFORMER 1C INSULATION
CUTTER, Maximum Width 60"
TRAILERS
2 – TRAILMOBILE 45' TANDEM-AXLE
ALUMINUM VAN BODY TRAILERS,
V/Ns 1PTO1AAH6Y9003726 (1998),
N/A, Swing-Out Doors
1 – FRUEHAUF MODEL FBZ8-F-40 40'
TANDEM-AXLE ALUMINUM VAN
BODY TRAILER, Swing-Out Doors
1 – DORSEY AID-209 32' SINGLE-AXLE
STORAGE TRAILER
1 – SPEED WAGON 6' X 20' TRI-AXLE
EQUIPMENT TRAILER, Ball Hitch,
Hydraulic Brake Actuator
2 – 10' X 40' TANDEM-AXLE OFFICE
TRAILERS
3 – STORAGE TRAILERS
STAKE TRUCKS
1 – 1984 CHEVROLET CUSTOM
DELUXE 30 SINGLE-AXLE STAKE
TRUCK, 5.7L Gas Engine, 4-Speed
Manual Transmission, 12' Bed
1 – 1969 INTERNATIONAL-HARVESTER
LOADSTAR 1700 SINGLE-AXLE
STAKE TRUCK, V-8 Gas Engine,
5-Speed Manual Trans., 16' Wood Bed
PICKUP TRUCKS
2 – CHEVROLET 3/4-TON PICKUP
TRUCKS, (1) 2002 SILVERADO
2500HD, Vortec V-8 Gas Engine, (1)
1995 CHEYENNE 2500, 5.7L Gas
Engine, Both Automatic Transmission
1 – 1996 GMC 1500SL 1/2-TON PICKUP
TRUCK, 5.3L Gas, Automatic Trans.
BRODERSON MODEL RT-200-3A
30,000-LB. CAPACITY DIESEL
ALL WHEEL DRIVE CARRY DECK CRANE
CARRY DECK CRANES
1 – BRODERSON RT-200-3A 30,000-LB. CAP. DIESEL ALL
WHEEL DRIVE CARRY DECK CRANE, Maximum Deck
Cap. Per Side 10,000-Lbs., Maximum Crane Extension
73'6", Hydraulic Outriggers
1 – BRODERSON RTR70B 16,000-LB. CAP. DIESEL CARRY
DECK CRANE, Max. Boom Ext. 45', Hydraulic Outriggers
FORKLIFTS
1 – CLARK CMP-30L 5050-LB. CAPACITY LPG FORKLIFT
TRUCK, Lift 169", Side Shift, Solid Tires, Overhead Guard
1 – CLARK C-500-Y3 5000-LB. CAPACITY GAS-POWERED
FORKLIFT TRUCK, Lift 186", Solid Tires, Overhead Guard
AERIAL WORK PLATFORMS
2 – SIMON MPN-40 500-LB. CAPACITY LPG TELESCOPING
AERIAL WORK PLATFORMS, Maximum Reach 40',
Wisconsin LPG Engine
1 – SIMON 32/21 500-LB. CAP. ELECTRIC TELESCOPING
AERIAL WORK PLATFORM, Maximum Reach 39'
2 – STRATO-LIFT MODEL SRX-20 1000-LB. CAPACITY
ELECTRIC SCISSOR-LIFT AERIAL WORK PLATFORMS,
Maximum Platform Height 20'
SHOP & FACTORY
1 – SPEEDAIRE 3Z745A2 5-HP VERTICAL TANK-MOUNTED
AIR COMPRESSOR
Welders, Bending Brakes, Come-a-Longs, Lifts, Chains,
Scaffolding, Tools, Supplies, Ladders, Tables, Cabinets, Torch
Sets, Racking, Etc.
COMPUTER & OFFICE EQUIPMENT
1 – COMPAQ PROLIANT 1600 NET SERVER
7 – PERSONAL COMPUTERS, (1) COMPAQ DESKPRO
PENTIUM II, (1) GATEWAY CELERON PENTIUM,
(3) GATEWAY 2000 PENTIUM, (2) MSI
2 – HEWLETT-PACKARD LASERJET LASER PRINTERS,
(1) 4000TN, (1) 2100
1 – HEWLETT-PACKARD OFFICEJET
PRINTER/SCANNER/COPIER
1 – CANON CFX-L45001F FAX MACHINE
2 – GTCO CALCOMP SUPER LIII BID SYSTEMS
Dot Matrix Printers, Desks, Office & Drafting Tables, Chairs,
File Cabinets, Etc.
RAW MATERIAL INVENTORY
LARGE QUANTITY OF RAW MATERIALS, Including:
Stainless Steel Stock: Sheet, Round Bar & Flat Bar, Channel,
Angle Iron, T-Iron, Tube; Hot-Rolled, Cold-Rolled & Galvaneal
Steel Sheet Stock; Galvanized Steel Stock: Sheet & Spiral
Pipe; Copper Stock: Sheet & Bar; Aluminum Stock: Sheet &
Flat Bar; Deck Plate, HVAC Pipe, Angle Iron Rings, Collars,
Elbows, Reducers, Insulation Pins, Fasteners, Fittings,
Dampers, Louvers, Plastics, Etc.
CLARK CMP-30L 5050-LB. CAPACITY
LPG FORKLIFT TRUCK
STRATO-LIFT SRX-20 1000-LB. CAP.
ELECTRIC SCISSOR-LIFT
AERIAL WORK PLATFORM
NEED ADVICE FROM
THE BEST
Trust DoveBid Valuation Services for
Your Consulting Needs
Guiding Global 4000 clients
through the complexity of required
financial reporting, tax and
structured finance valuations with
insight and expertise from industry
leading professionals.
For more information, call
800.665.1043
NEED HELP WITH
SHIPPING
As a courtesy to our buyers,
DoveBid can provide contact
information for shipping companies.
For details, please visit DoveBid’s
Website at www.dovebid.com or
call our customer service department
at 800.665.1042.
®
7
To schedule an auction, call our Southfield, MI Office • Phone 248.353.8640

Global Provider of Capital Asset Auction & Valuation Services
Over $3.3 billion sold in 22 asset categories and over $34 billion in assets valued across 15,000 appraisals since 1990.
Auctioneers, Sale Advisors & Appraisers
Worldwide Headquarters
1241 East Hillsdale Boulevard
Foster City, California 94404
650.571.7400 • Fax: 650.572.1502
www.dovebid.com
Customer Service 800.665.1042
®
Presorted
First Class Mail
U.S. Postage
PAID
Detroit, Mich.
Permit No. 1904
Return Service Requested
For further information,
please contact our Southfield, Michigan Office
Phone 248.353.8640
DoveBid On-Location Auction
• Bid live in Flint & Saginaw, Michigan
By order of the Board of Directors,
for the benefit of the Secured Creditors of
THE ZACK COMPANY
2-DAY ON-LOCATION
AUCTION
July 16 & 17, 2003
2 Complete Sheet Metal
Fabricating Facilities
Over 100 upcoming auctions • www.dovebid.com
Industrial Real Estate for Sale or Lease
2 Locations • Thru Private Negotiations Only
Flint, Michigan
• Land Area: 6.74 acres • Building Area: 49,887 sq ft
For further information please contact
Dynamic Realty
Phone 810.238.3900
Saginaw, Michigan
• Land Area: 2 acres • Building Area: 26,807 sq ft
For further information, please contact
Wayne Sexmore • The Miller Group
Phone 989.790.2611
©2003 DOVEBID, ALL RIGHTS RESERVED • PRINTED IN USA • #ZACK4850 • CA Bond# 57BSBAI7624
DoveBid and the DoveBid logo are registered trademarks of DoveBid, Inc.
Complete Terms & Conditions are contained in the Sale Catalog and on the website at www.dovebid.com.
Please review the Terms and Conditions prior to placing bids on any items. Worldwide Headquarters: Foster City, California