Hager 2012 Master Revision List - Access Hardware Supply

Hager 2012 Price Book Master List of Revisions
This document serves as a tracking method for revisions made to Hager’s 2012 Price Book. Revisions are made to the PDF files of the
2012 Price Book online and indicated on this document. Quartlery reminders are sent out to refer to this document in an effort to keep
your Price Book up-tp-date. Please contact Hager Customer Service with any questions. For printing, if you are printing an odd number
page, print that page plus the following page and select double sided printing. If you are printing an even number page, print that page
plus the page before it and select double sided printing. 3-hole drill and replace pages in your binder.
Page Description of Revision
Number
Architectural Hinges
Date of
Revision
44 Revised pricing for 1191 5” x 4” 08/06/2012
58 Replaced image of 1251 08/06/2012
59 Replaced image of 1252 08/06/2012
85 Corrected price for ECBB1101 4-1/2 x 4-1/2 US15 and US26 to 40.80 04/04/2012
Residential Hinges
All Ensured that all stock numbers are six-digits 04/04/2012
Roton
3 Removed 780-110 and 780-110HD from Fully Concealed with Stud 08/06/2012
4 Revised paragraph under Special Lengths 08/06/2012
12 Added column G to table 08/06/2012
13 Removed ETW option from 780-110 and 780-110HD 08/06/2012
Trim
3 Added a note in parenthesis in sentence under Crating Charges 04/17/2012
4 Under Tactile Warning, second bullet, changed 3” to 2-1/2” 08/06/2012
7 Corrected black header for products 190S-198S, fifth column, to read “US10B, US19, US9” 04/04/2012
7 Corrected black header for products 204S and 214S, columns 3-6, to read “Clear Plastic,” “Black,” “Brown,” and 04/04/2012
“Grey.”
7 Corrected gauge of 198S to .038 04/20/2012
7 Revised all pricing for 193S and 194S 04/26/2012
8 Move 220S to page 8 and corrected black header for products 220S-224S, fifth column, to read “US10B, US19, US9” 04/04/2012
7-8 Revised footer to read “U/M is price per hundred square inches” 04/04/2012
8 Revised all pricing for 223S and 224S and cleaned up Options section at the bottom of page 04/26/2012
20 Corrected projection for 15P to 3/16” (5 mm) 04/04/2012
20 Updated image for 16N 04/04/2012
25 Corrected projection for 25B to 3/16” (5 mm) 04/04/2012
34 Corrected price of 34J 4” x 16” US32 to be $107.05 04/20/2012
63 Removed “Handing required” from 170D 08/06/2012
66 Replaced image of 181K 04/17/2012
71 Revised 185G US32D finish to “US32D w/ tape” 04/04/2012
71 Revised fasteners for 185G and removed note about #6 x 1” screws 08/06/2012
82 Corrected fire rating note to read for wood doors for 294D 04/20/2012
83 Corrected fire rating note to read for metal doors for 295M and corrected description of 295W to read Wood Doors 04/20/2012
83 Revised fasteners for 296W 08/06/2012
www.hagerco.com
1

Hager 2012 Price Book Master List of Revisions
85 Revised pricing for 300D, 30-1/2”, US26D to $52.35 08/06/2012
91 Corrected case quantity for 327W to 20 04/04/2012
89-91 Re-ordered products 324W-330M to be in numerical order 04/04/2012
92 Deleted “Deadlock” from 336C and “161 Door Prep” from 336D 08/06/2012
116 Updated image of 974P and added Pull Diameter and Base Diameter 04/17/2012
116 Revised 970P to include pricing for 36” or less and over 36” and added “Handing required” 08/06/2012
117 Updated image of 974B and added Pull Diameter and Base Diameter 04/17/2012
129 Corrected pricing for 2630 to 3.70 for all finishes 04/04/2012
135 Corrected pricing for 1758 to 8.45 for all finishes and pricing for 1759 to 16.15 for all finishes 04/04/2012
Thresholds & Weatherstripping
7 Switched images for 414S and 415S 04/10/2012
15 Corrected pricing for 599S, MIL finish, S insert to 13.00 04/04/2012
16 Changed GLD finish to MIB finish for 602S, 603S, 604S, and 608S 08/06/2012
36 Added pricing for MIL finish for 837 04/20/2012
41 Corrected pricing for 885S and 891S to reflect F insert 04/04/2012
Sliding Door Hardware
Locks
6 Corrected pricing for 9892 to 46.35 and pricing for 9893 to 86.80 04/04/2012
12 Corrected Length and 2012 List for 9885-72 and 9885-96 08/06/2012
14 Corrected pricing for 9894 to 38.75 04/04/2012
18 Corrected pricing for 9632 to 28.95 04/04/2012
20 Corrected pricing for 9801 track - all lengths 04/04/2012
21 Corrected pricing for 9895 to 42.55 04/04/2012
24 Deleted product 9112 04/04/2012
26 Corrected pricing for 9129 to 74.00 04/04/2012
29 Deleted 9571 08/06/2012
33 Corrected pricing for 9821 71” to 33.70 04/04/2012
37 Corrected pricing for 9264 to be $33.00 04/20/2012
18, 24,
28, 48
Revised dimensions of 3935 to read 1-5/16” x 4-7/8” (33 mm x 124 mm) 08/06/2012
20 Corrected William lever to read August lever 04/26/2012
40 3800 Series Deadlock - note about finishes having extended lead times - removed US32D 08/06/2012
57 For 3902, revised contents of box 08/06/2012
Door Controls
7 Added Painted Metal Cover option for 5962 08/06/2012
Exit Devices
1 Corrected spelling of Hex Key for Dogging under Accessories, 4600 Series Grade 2 Narrow Stile 04/04/2012
4 Added Delayed Egress (DE) to Electric Modifications 08/06/2012
5 Updated 4500 Series How to Order 08/06/2012
www.hagerco.com
2

Hager 2012 Price Book Master List of Revisions
6 Updated 4600 Series and 4600 Series Trim How to Order 08/06/2012
7 Updated 4700 Series Trim How to Order 08/06/2012
8 Added Quick Ship items 04/04/2012
8 Corrected stock number for 4501 36” US32D to 015241 04/13/2012
9 Added Quick Ship items 04/04/2012
9 Removed Severe Windstorm Rating from 4501 SVR 08/06/2012
19 Revised 3976 L cam to read standard cam for 4601 RIM 08/06/2012
23 Added Quick Ship items 04/04/2012
25 Corrected Function for 47NL to be 03 - Key retracts latchbolt 08/06/2012
26 Added Apollo knob option for 47KE 08/06/2012
27 Added Apollo knob option for 47KN 08/06/2012
33 Changed 4900NK to 4900U Non-Keyed Removable Mullion Set 08/06/2012
34 Changed 4900KR to 4900T Keyed Removable Mullion Set 08/06/2012
Electrified Products
2 Added note to 2908 - “Batteries sold separately” 08/06/2012
2 2915 - Changed 120 users to 500 users 08/06/2012
2 2916 - Changed 480 users to 500 users 08/06/2012
3 2928 SC - Changed US32D finish to ALM finish 08/06/2012
4 Added part numbers for options at bottom of page 08/06/2012
7 2958 - Changed from Surface mount - double to Surface mount - single 08/06/2012
8 2977 - Changed from adjustable 1-40 seconds to adjustable 1-35 seconds 08/06/2012
8 Added 2-679-0612 08/06/2012
Index
14 Deleted product 9112 04/04/2012
www.hagerco.com
3