T H E P R O F E S S IO N A L S C H O IC E - Dr. Schulze GmbH

Dr. Schulze GmbH
THE PROFESSIONAL´S CHOICE
Eazy Saw - rail guided handsaw
The rail guided Eazy Saw is 100% safe and can cut up to 21 cm in concrete
and brickwork without fatiguing the operator! For smaller projects the
Eazy Saw is the perfect alternative for petrol cut off saws, chain- and ring
saws.
Version 08/10
Dr. Schulze GmbH
Diamond tools and machines
Factory I
Bollenberg 10, D-57234 Wilnsdorf
Tel. +49 (0) 27 37 59 53-0 - Fax +49 (0) 27 37 59 53-3
www.dr-schulze.de
www.diamondtools.ru
info@dr-schulze.de
Profi-Center Meissner Maschinen
Stahlstraße 16, D-57234 Wilnsdorf
Tel. +49 (0) 27 37 22 95-0 - Fax +49 (0) 27 37 22 95-15
Factory II
Wilhelm-Fressel-Straße 5, D-21337 Lüneburg
Tel. +49 (0) 41 31 5 10 58 - Fax +49 (0) 41 31 5 09 46
Factory III
Straße D Nr. 3, D-39245 Gommern
Tel. +49 (0) 3 92 00 5 00 68 - Fax +49 (0) 3 92 00 5 00 69
Dr. Schulze-POLSKA Sp. z o.o.
ul. Rymarska 10, PL-70-702 Szczecin
Tel. +48 (0) 91 4 60 68 80 - Fax +48 (0) 91 4 60 68 83
www.schulze.pl
centrala@schulze.pl
Technical details
Max. saw blade Ø 350 - 450 - 540 mm
Max. cutting depth 11 - 16,5 - 21 cm
Motor
2,2 kW / 230 V
Rotation speed 2700 min -1
Bore
30 mm
Weight: - motor unit 14,6 kg
- rail 1,3 m 6,6 kg
- rail 2,3 m 9,9 kg
Water consumption 1 l/min
Price per piece, ex works. Our general conditions are valid.
For articles marked with the conditions for machines are valid.

Saw unit
The saw unit is equipped with a patented hinge system
which fits the carriage on the guide rail. By turning the handle
the hinge is secured and prevents the saw blade to jump out
of the cut. The hinge is extremely rigid which squeezes the
saw blade to move in the cut almost without friction on the
blade centre. The cutting performance will therefore increase!
The cutting depth regulation is integrated in the saw unit and
can easily be pre-set.
Cutting process
From the start position on the guide
rail the saw blade is pushed into the
wall up to a depth of 3-5 cm. After
that the machine is tilted backwards
and lowered about 10 cm on the rail.
From this position the saw blade is
pushed in the wall again. This process
is called plunge cutting. The first saw
blade is ø 350 mm and can reach a
cutting depth of 11 cm. After this saw
blades of ø 450 and ø 540 mm can be
mounted (in the cut).
Guide rails
The guide rails are made of high strength aluminium and are
mounted on the wall with anchors. The double spirit level, integrated
in the end stop of the rail, assures a prefect straight
cut. Rails are available with 1,3 meter or 2,3 meter length. The
carriage is mounted on the rails with slide bushes which can
easily be exchanged.
Special adapter plates are available for mounting the rail on
uneven or rough walls.
Blade guard
The blade guard is made of aluminium sheet material
and has an ergonomically rubber grip. The unique “spraycontrol”
system prevents cooling water to spray from the
cut in each position. Additional handles can be mounted
on both sides of the guard for optimum ease of use
during horizontal cutting.
Price per piece, ex works. Our general conditions are valid.
For articles marked with the conditions for machines are valid.

Triple safety for the operator
The special design of the hinge prevents
the sawblade from “jumping”out of the cut.
This increases the safety for the operator.
The special slipping clutch inside the motor
protects the gearbox and the operator when
the saw blade is jammed. The machine is
equipped with a personal residual current
device (PRCD) and “zero-voltage” cut off.
To avoid overload situations, a thermal relay
is integrated in the motor housing.
Water cooling
The cooling water is supplied to the saw
blade via the hollow shaft in the gearbox.
The saw blade segments are therefore
cooled efficiently with a minimum of water.
With a needle valve the cooling water can
be regulated with great precision. The water
indirectly also reduces the temperature
of the gearbox which has a positive effect
on the lifetime of the motor.
Eazy Saw - saw blades
A special set of extra thin saw blades
is designed for the Eazy Saw to cut in
concrete and brickwork.
These are available in:
Ø350 x T=2,8 mm
Ø450 x T=2,8 mm
Ø540 x T=2,6 mm
By using these saw blades
the maximum cutting
production of the
Eazy Saw is assured.
Price per piece, ex works. Our general conditions are valid.
For articles marked with the conditions for machines are valid.

Guide rail couplers
For perfect straight long cuts just connect the various guide
rails with a set of aluminium couplers.
Eazy Saw with flush cut guard
Safe and easy flush cutting up to 21 cm depth. The outer
brush prevents excessive water spray.
Transport cases
Heavy duty boxes for trouble free storage and transportation
of the Eazy Saw unit and guide rails.
Corner drill
To prevent overcuts on corners just
click the Corner Drill on the Eazy Saw
guide rail and drill holes up to Ø 80 mm.
The column swivels in the baseplate to
drill holes on or within the cutting line.
Eazy Saw
Saw unit 2200 W / 230 V / Ø 540 mm blade guard 2.360,00 €
Guide rail L= 1,3 meter
with carriage and rubber end pieces
770,00 €
Guide rail L= 2,3 meter
with carriage and rubber end pieces
920,00 €
Accessories
Guide rail couplers 99,00 €
Transport case for saw unit 135,00 €
Transport case for rail L=1,3 meter 99,00 €
Transport case for rail L=2,3 meter 135,00 €
Conversion kit flush cut guard Ø 540 mm 690,00 €
Corner drill – max. Ø 90 mm (without drilling-motor) 999,00 €
Eazy Saw - saw blades – concrete + brickwork – wet cutting
Ø 350 x 2,8 x 10 mm 398,00 €
Ø 450 x 2,8 x 10 mm 675,00 €
Ø 540 x 2,6 x 10 mm 745,00 €
Price per piece, ex works. Our general conditions are valid.
For articles marked with the conditions for machines are valid.