Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8801 SE Electrified<br />
Panic Bar<br />
Dummy Panic Bar<br />
8099M1-Single Switch<br />
8099M2-Dual Switch<br />
$226.20 ea.<br />
$269.12 ea.<br />
For remote control access or access control with an Adams Rite 8000<br />
Series exit device. A 24 volt motor enclosed in pushbar retracts latch<br />
mechanism of exit device. Motor draws only 300 milliamps while operating<br />
and offers enough torque to overcome most door load situations. The<br />
motor draws current only when actually operating so electrical dogging<br />
can be achieved with no current draw other than that in the unlocking<br />
cycle. Operation is with simple push button, card reader, key pad or other<br />
switch. Switch can be momentary, allowing automatic relocking of device<br />
or “maintained”, to allow electrical dogging.Motor operation has no<br />
effect on mechanical exit function of device Motorized devices can<br />
require 1 to 4 seconds for the complete unlocking cycle. Requires a<br />
minimum of 4 wires available at door for installation. Ideal for electrical<br />
dogging or low frequency access control. Specify by adding “SE”<br />
after exit device model number.<br />
EXAMPLE: 8611SE<br />
Exit Device Outside trims<br />
Features:<br />
$537.08 ea.<br />
Electric latch retraction<br />
♦ All models fit all Adams Rite Exit Device types<br />
Dummy pushbar with no latch mechanism but has switch<br />
activation, single or dual switch. Most common application<br />
is in conjunction with a maglock where bar is pushed<br />
to turn off magnet and allow exit from building. Dual<br />
switch version allows redundancy where required by code<br />
or the operation of a signal device along with maglock.<br />
Specify door type(Aluminum or Wood) and width when<br />
ordering. Available in all exit device finishes. The 8099 is<br />
also available as a non-operating dummy for doors not<br />
requiring an exit device but where matching trim is<br />
desired. Specify door type, opening width and type of exit<br />
device to be matched.<br />
8066<br />
3083<br />
♦ Models 3083 and 8066 feature an innovative clutch that<br />
protects locked lever against upward or downward pull<br />
♦ All lever models meet ADA guidelines and California Title 19<br />
♦ All models ANSI/BHMA Grade 1<br />
Exit Device<br />
Cylinder Hole<br />
1 SVR 3 Mortise 5 Inset CVR 3 with cylinder hole<br />
6 CVR 7 Rim 9 None 9 without cylinder hole<br />
3081-33-US3<br />
Escutcheon-8650 Required to mount any make standard<br />
Mortise cylinder, with MS cam, on the<br />
outside of door. Also required when<br />
specifying CVR devices with a cylinder.<br />
Specify finish being matched when<br />
ordering<br />
$32.40 ea.<br />
Exit Device<br />
00 Mortise or CVR<br />
01 Rim or SVR<br />
Finish<br />
$134.40 ea.<br />
$234.00 ea.<br />
CVR is Concealed Vertical Rod<br />
SVR is Surface Vertical Rod<br />
Door Handle<br />
8066-01-08-US3<br />
07 All Non-rated CVR, SVR, LHR Rim,<br />
LHR Mortise<br />
08 All Non-rated RHR Rim, LHR Mortise<br />
628 Satin Aluminum US9 Bright Bronze<br />
313 Bronze Anodized US10 Satin Bronze<br />
335 Black Anodized 10B “Oil-Rubbed” Bronze<br />
US3 Bright Brass US32 Satin Stainless<br />
US4 Satin Brass<br />
41