Meridian Rotary Shaft Seal - Wind Energy Network

Meridian Rotary Shaft Seal Range
Profile
Operating Range
P (Bar) °C V(m/sec)
>5m/s – 0,1
-40°C - +120°C NBR
-40°C - +170°C HNBR
-30°C - +200°C FPM
25
Standard rotary shaft seal
with reinforced cottonfabric/lastomer
back.
Available in standard sizes
and as a split seal.
>5m/s – 0,1
-40°C - +120°C NBR
-40°C - +170°C HNBR
-30°C - +200°C FPM
25
As per 0198, but with radial
ports and circumferential
groove. Can be fitted back
to back. Available in split
form.
>5m/s – 0,1
-40°C - +120°C NBR
-40°C - +170°C HNBR
-30°C - +200°C FPM
25
Self retaining design.
Does not ordinarily require
a clamping plate.
>5m/s – 0,1
-40°C - +120°C NBR
-40°C - +170°C HNBR
-30°C - +200°C FPM
25
A special moulding process
bonds a 1,5 – 2,5 mm thick
PTFE based membrane on
to the NBR base material.
Running friction is reduced,
thereby increasing journal
life.
0,1 – 5,0+
-40°C - +120°C NBR
-40°C - +170°C HNBR
-30°C - +200°C FPM
25
Rotary shaft seal for high
pressure / high speed
applications. Dependent
upon peripheral velocity,
type 0209 can accept
pressures in excess of 5 bar.
0,1
-40°C - +120°C NBRR
-30°C - +200°C FPM 20
Vee ring type seal, available
in all styles. Suitable for
ensuring water / scale do
not enter bearing
assemblies.
Springs available in Carbon Steel, Stainless Steel, and Monel
Tel: (0113) 252 1061 Fax: (0113) 252 2627
email: tonys@ftlseals.co.uk www.ftlseals.co.uk
Bruntcliffe Avenue, Leeds 27 Business Park, Morley, Leeds LS27 OTG