FIBERGLASS EXHAUST FANS - Green-Tek

FIBERGLASS EXHAUST FANS
Green-Tek is North America’s premium Greenhouse Environmental
Supplier. Our components are designed to cover all aspects of a
good ventilation system. The 12” to 72” fiberglass exhaust fan series
covers a wide range of CFM performance and industry leading air
movement and efficiency. The 72” is a high output and high efficient
exhaust fan. This 72” fan produces an astounding 65,000 CFM and
30 CFM/WATT at 0” static pressure. This large fan is variable speed
with a variable frequency drive and can replace many smaller less
efficient fans. By replacing many smaller fans you can reduce your
installed cost and save on electrical operating and maintenance cost.
The 72” also gives you more CFM per fan size than any other fan.
Less fans means less cost and more light in your greenhouse!
HIGH PERFORMANCE AND INNOVATIVE DESIGN
• Thick and corrosion resistant fiberglass housings with limited
lifetime warranty.
• Industry leading performance and efficiency.
• Totally enclosed, maintenance free, high efficiency motors.
• Shipped fully assembled except for discharge cones and
guards.
• Extremely quiet operation on all speeds.
• Available in white or black fiberglass finishes.
• Automatic belt tensioner on all belt drive fans.
When designing a proper ventilation system you want to transition from
minimum ventilation to maximum ventilation as smoothly as possible.
With our 72” fiberglass fan and our optional variable frequency drives
you can smoothly go from 10,000 CFM to 65,000 CFM making it the
most versatile fan in the market.
• Our 12”, 18”, 24”, 36” and 52” fans have excellent performance and
efficiency.
• Fiberglass housings and cones are stronger and thicker than our
competition.
• Fiberglass is a corrosion resistant and easy to clean surface. Our
fiberglass discharge cones are designed not to stick out as far as
conventional exhaust fans.
• Shorter cones are protected from snow and ice damage by most roof
overhangs. The large cones on our competition work well in
laboratory environments but do not perform as well outdoors, nor
stand up well to the wind blowing against them.
• Our fiberglass fans series is ideal for tunnel or exhaust ventilation in
greenhouse dairy, poultry, swine, factories and warehouses.
• Shutters available in plastic and aluminum.
• 12”, 18”, 24”, 36”, 52” and 72” models available.
• Optional smooth speed adjustment variable frequency drives
for the 72” fan increases belt and motor life.
• 2 year warranty on the motors.
• Lifetime warranty on cast aluminum blades
• One year warranty on all parts.
• Optional inside winter panels available.
• 72” FAN PERFORMANCE INDEPENDENTLY TESTED
www.green-tek.com
Janesville, WI • Visalia, CA
Toll Free: (800) 747-6440
Phone: 608-754-7336 • Fax: 608-754-7334

CFM/ CFM/ CFM/ CFM/ CFM/
Watts CFM Watt CFM Watt CFM Watt CFM Watt CFM Watt
Part# Size Drive HP Volt PH AMP RPM Used 0” SP 0” SP .05” SP .05” SP .10” SP .10” SP .15” SP .15” SP .20” SP .20” SP Shutter
Without Cone
FRP12115230 12” DD 1/10 115/230 1 1.0 1725 100 1,350 11 1,283 10.45 1,218 9.93 1,157 9.43 1,100 8.96 Plastic
FRP12115230AS 12” DD 1/10 115/230 1 1.0 1725 100 1,350 11 1,283 10.45 1,218 9.93 1,157 9.43 1,100 8.96 Alum
FRP18115230 18” DD 1/3 115/230 1 3.5/1.7 1725 275 4,000 13 3,800 12.35 3,610 11.73 3,430 11.15 3,258 10.59 Plastic
FRP18115230AS 18” DD 1/3 115/230 1 3.5/1.7 1725 275 4,000 13 3,800 12.35 3,610 11.73 3,430 11.15 3,258 10.59 Alum
FRP24115230 24” DD 1/2 115/230 1 4.8/2.4 1725 450 6,400 15 6,080 14.25 5,776 13.54 5,487 12.86 5,213 12.22 Plastic
FRP24115230AS 24” DD 1/2 115/230 1 4.8/2.4 1725 450 6,400 15 6,080 14.25 5,776 13.54 5,487 12.86 5,213 12.22 Alum
FRP36115230 36” DD 1/2 115/230 1 6.0/3.0 825 625 11,000 19 10,450 18.05 9,928 17.15 9,431 16.29 8,960 15.48 Plastic
FRP36115230AS 36” DD 1/2 115/230 1 6.0/3.0 825 625 11,000 19 10,450 18.05 9,928 17.15 9,431 16.29 8,960 15.48 Alum
FRP36230460 36” DD 1/2 230/460 3 1.8/0.9 850 625 11,000 19 10,450 18.05 9,928 17.15 9,431 16.29 8,960 15.48 Plastic
FRP36230460AS 36” DD 1/2 230/460 3 1.8/0.9 850 625 11,000 19 10,450 18.05 9,928 17.15 9,431 16.29 8,960 15.48 Alum
With Cone
FRP24115230C 24” DD 1/2 115/230 1 4.8/2.4 1725 450 7,000 17 6,650 16.15 6,318 15.34 6,002 14.58 5,702 13.85 Plastic
FRP24115230CAS 24” DD 1/2 115/230 1 4.8/2.4 1725 450 7,000 17 6,650 16.15 6,318 15.34 6,002 14.58 5,702 13.85 Alum
FRP36115230C 36” DD 1/2 115/230 1 6.0/3.0 825 625 12,300 22 11,685 20.90 11,101 19.86 10,546 18.86 10,018 17.92 Plastic
FRP36115230CAS 36” DD 1/2 115/230 1 6.0/3.0 825 625 12,300 22 11,685 20.90 11,101 19.86 10,546 18.86 10,018 17.92 Alum
FRP36230460C 36” DD 1/2 230/460 3 1.8/0.9 850 625 12,300 22 11,685 20.90 11,101 19.86 10,546 18.86 10,018 17.92 Plastic
FRP36230460CAS 36” DD 1/2 230/460 3 1.8/0.9 850 625 12,300 22 11,685 20.90 11,101 19.86 10,546 18.86 10,018 17.92 Alum
FRP52230C 52” BD 1 230 1 5 600 1200 27,500 25 26,125 23.75 24,819 22.56 23,081 20.98 21,466 19.51 Plastic
FRP52230CAS 52” BD 1 230 1 5 600 1200 27,500 25 26,125 23.75 24,819 22.56 23,081 20.98 21,466 19.51 Alum
FRP52230460C 52” BD 1 230/460 3 3.23/1.62 600 1200 27,500 25 26,125 23.75 24,819 22.56 23,081 20.98 21,466 19.51 Plastic
FRP52230460CAS 52” BD 1 230/460 3 3.23/1.62 600 1200 27,500 25 26,125 23.75 24,819 22.56 23,081 20.98 21,466 19.51 Alum
FRP522302C 52” BD 2 230 1 8 690 1600 34,950 24 33,203 22.80 31,542 21.66 29,334 20.14 27,281 18.73 Plastic
FRP522302CAS 52” BD 2 230 1 8 690 1600 34,950 24 33,203 22.80 31,542 21.66 29,334 20.14 27,281 18.73 Alum
FRP522304602C 52” BD 2 230/460 3 6.64/3.24 690 1600 34,950 24 33,203 22.80 31,542 21.66 29,334 20.14 27,281 18.73 Plastic
FRP522304602CAS 52” BD 2 230/460 3 6.64/3.24 690 1600 34,950 24 33,203 22.80 31,542 21.66 29,334 20.14 27,281 18.73 Alum
FRP72323460 72” BD 3 230/460 3 8.2/4.1 322 2200 65,000 30 57,000 26.00 50,000 23.00 44,000 20.00 39,000 18.00 Plastic
FRP721230 72” BD 3 230 1 13.2 322 2200 65,000 30 57,000 26.00 50,000 23.00 44,000 20.00 39,000 18.00 Plastic
Cone
FRP Rough Spacing
Size Blade Opening Min.
12” 3-Alum 15.25” x 15.25”
18” 3-Alum 25.75” x 25.75”
24” 3-Alum 31.75” x 31.75” 36”
36” 3-Galv 43.75” x 43.75” 48”
52” 3-Cast Alum 58.75” x 58.75” 62.5”
72” 6-Alum 78” x 78” 86”
12” – 36” FEATURES
• Balanced 3 paddle blades.
• Corrosion resistant aluminum base mount.
• Direct drive maintenance free motors.
• Energy efficient.
52” FEATURES
• Balanced 52” heavy duty cast aluminum blade with a Lifetime Warranty.
• Available 1 HP and 2 HP motors.
• Cog (AX) Belt drive with automatic tensioners.
• Hot dipped galvanized motor mount and base.
72” FEATURES
• Balanced 72” heavy duty corrosion resistant 6 paddle aluminum.
• On high speed produces 65,000 CFM and 30 CFM/watt at 0” static
pressure.
• On low speed produces 10,000 CFM and 30 CFM/watt at 0” static
pressure.
• Optional variable frequency drive allows you a smooth speed adjustment
from 300 RPM down to 80 RPM. Fan power consumption reduces with
speed. Make sure you have a minimum shutter opening on low speed
of 1”.
• 72” fan performance independently tested.
TECHNICAL SPECIFICATIONS
• Motor is 3 HP or 2.2KW on high and .3KW on low 230/460, 3 phase VAC.
• Belt drive runs 315 RPM on high and 80 RPM on low.
• Optional variable frequency drive.
• Outside dimensions 77” X 77” X 32”
Call one of our ventilation design engineers for proper sizing of your shutter
exhaust fan or a recommendation of a Green-Tek complete Greenhouse
environmental system.
www.green-tek.com
Janesville, WI • Visalia, CA
Toll Free: (800) 747-6440
Phone: 608-754-7336 • Fax: 608-754-7334