ART_Refinishing_Guide_v2.1.pdfDownload - Mirka

SOP - Clearcoat Small Area Finishing
• Remove dirt nibs, runs or sags in clear coats
• Match original paint surface texture
1. SAND 2. FINESSE
Microstar P1500
FM-608-1500
MR-3 Sander
913G Backup Pad
9133 Interface Pad
Sand with 1500 grit (dry) using moderate speed.
The clear should “powder” when sanding. If you can
not produce dust, then it is not dry enough to sand.
Sanding too early risks producing “pills” which will
damage the surface.
Microstar was designed to remove runs, dust nibs,
excess orange peel or other surface defects in
painted surfaces or gelcoat prior to polishing.
Abralon® 3000
#8A-203-3000
MR-3 Sander
913G Backup Pad
Refine sand scratches using 3000 grit
Abralon with a 50% overlap pattern (wet).
Spray the pad and surface with clean
water. If too much is used, it will be
evident by water “slinging” from the
pad, and the abrasive will float over the
surface with reduced cutting action.
3” GRIP DISCS Grit Wt. Qty Per Pkg List Price/Pkg
Microstar 3” Film-Backed Grip Disc
FM-608-1500 1500 FILM 50 $30.22
Polarstar® 3” Film-Backed Grip Disc
FA-608-1500 1500 FILM 50 $30.22
Q.Silver® 3” Grip Disc
2C-608-1500 1500 C 50 $20.58
Abralon® 3” Foam Grip Disc
8A-203-3000 3000 FOAM 20 $40.44
Shop Price/Pkg
$27.20
$27.20
$18.52
$36.40
GOOD BETTER BEST UNIQUE
18