tuscany cushion double glider assembly instructions item ... - Big Lots
tuscany cushion double glider assembly instructions item ... - Big Lots
tuscany cushion double glider assembly instructions item ... - Big Lots
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TUSCANY CUSHION DOUBLE GLIDER<br />
ASSEMBLY INSTRUCTIONS<br />
ITEM# SC-J-250-1ENDG<br />
1) Remove all parts from the carton and lay them out on a flat surface, please count the components first,<br />
there are:<br />
a) 2 arms (A)<br />
b) 1 seat (B)<br />
c) 1 back (C)<br />
d) 1 support base with 4 gliding plates attached (D)<br />
e) 2 <strong>cushion</strong>s (E)<br />
f) 1 accessory bag which consists of : 6 short bolts (Fa) plus 1 spare,6 long bolts (Fb) plus 1 spare, 4<br />
nuts (Fc), 16 metal washers (Fd) plus 1 spare, 4 plastic washers (Fe), 1 Allen wrench (Ff), 1 Hex<br />
wrench (Fg), 1 <strong>assembly</strong> <strong>instructions</strong> sheet (Fh).<br />
2) Attach the arm (A) to the seat (B). Insert a long bolt (Fb) from outside through a metal washer (Fd),<br />
through arm (A) and secure into the front crossbar of seat (B). Then insert a short bolt (Fa) from outside<br />
through a metal washer (Fd), through the hole of the arm (A) and secure into the rear crossbar of the<br />
seat (B). Do not tighten. Repeat procedure for the other side.<br />
3) Attach the back (C) to the arm (A), for each hole inserting a short bolt (Fa) from outside through a metal<br />
washer (Fd), through the hole of the arm (A) and secure into the back (C). Do not tighten. Repeat<br />
procedure for the other side. Tighten all bolts.
Change language