tuscany cushion double glider assembly instructions item ... - Big Lots
tuscany cushion double glider assembly instructions item ... - Big Lots
tuscany cushion double glider assembly instructions item ... - Big Lots
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TUSCANY CUSHION DOUBLE GLIDER<br />
ASSEMBLY INSTRUCTIONS<br />
ITEM# SC-J-250-1ENDG<br />
QUESTIONS, PROBLEMS, MISSING PARTS WITH THIS PRODUCT DO NOT RETURN<br />
TO YOUR RETAILER, PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT 9:00<br />
A.M. TO 5:00 P.M. EASTERN STANDARD TIME MONDAY THROUGH FRIDAY PHONE# 1-<br />
800-229-0730
TUSCANY CUSHION DOUBLE GLIDER<br />
ASSEMBLY INSTRUCTIONS<br />
ITEM# SC-J-250-1ENDG<br />
1) Remove all parts from the carton and lay them out on a flat surface, please count the components first,<br />
there are:<br />
a) 2 arms (A)<br />
b) 1 seat (B)<br />
c) 1 back (C)<br />
d) 1 support base with 4 gliding plates attached (D)<br />
e) 2 <strong>cushion</strong>s (E)<br />
f) 1 accessory bag which consists of : 6 short bolts (Fa) plus 1 spare,6 long bolts (Fb) plus 1 spare, 4<br />
nuts (Fc), 16 metal washers (Fd) plus 1 spare, 4 plastic washers (Fe), 1 Allen wrench (Ff), 1 Hex<br />
wrench (Fg), 1 <strong>assembly</strong> <strong>instructions</strong> sheet (Fh).<br />
2) Attach the arm (A) to the seat (B). Insert a long bolt (Fb) from outside through a metal washer (Fd),<br />
through arm (A) and secure into the front crossbar of seat (B). Then insert a short bolt (Fa) from outside<br />
through a metal washer (Fd), through the hole of the arm (A) and secure into the rear crossbar of the<br />
seat (B). Do not tighten. Repeat procedure for the other side.<br />
3) Attach the back (C) to the arm (A), for each hole inserting a short bolt (Fa) from outside through a metal<br />
washer (Fd), through the hole of the arm (A) and secure into the back (C). Do not tighten. Repeat<br />
procedure for the other side. Tighten all bolts.
TUSCANY CUSHION DOUBLE GLIDER<br />
ASSEMBLY INSTRUCTIONS<br />
ITEM# SC-J-250-1ENDG<br />
4) Attach the fame to the support base (D). Insert a long bolt (Fb) from outside through a metal washer<br />
(Fd), through the arm (A), through a plastic washer (Fe), through the gliding plate of the support base<br />
(D), through another metal washer (Fd) and secure with a nut (Fc), do not tighten. Repeat procedure for<br />
another hole and the other side.<br />
5) Tighten all bolts and nuts by using Allen and hex wrenches (Ff, Fg) provided.<br />
6) Place the <strong>cushion</strong>s (E) onto the frame and fasten the Velcro straps.<br />
Your <strong>double</strong> <strong>glider</strong> is now ready for use!<br />
NUMARK INDUSTRIES COMPANY LTD.,<br />
PRINTED IN CHINA