P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

More documents

Recommendations

Info

6.2 Enable Print Server’s TCP/IP Support The default configuration of the print server is with TCP/IP support enabled. Anyway, you can configure the print server to enable TCP/IP support using the configuration program. 39 AirLive P-203N User’s Manual
6.3 Setup Print Server’s IP Address The print server must have a unique IP address in order to be recognized by the network. You can set up the IP address on the various Unix systems using any one of the following methods: 1. DHCP (Dynamic Host Configuration Protocol) 2. BOOTP (Bootstrap Protocol) The print server will use the last three methods to obtain its IP address automatically if its IP address is configured as Auto (0.0.0.0). 6.3.1 DHCP There are many Unix systems that support DHCP protocol, and the procedures to configure the DHCP server database are different. This manual does not describe the DHCP server configuration on the Unix systems. It is highly recommended that the DHCP server should be located on the same network as the print server. 6.3.2 BOOTP If you have the BOOTP daemon, bootpd, running on your UNIX system that is accessible by the print server, you can use the BOOTP protocol to set up the IP address of the print server. We recommend that the BOOTP server should be located on the same subnet as the print server. If you use Network Information Services (NIS) in your system, you may need to rebuild the NIS map with the BOOTP services before doing the following BOOTP configuration. To rebuild the NIS map, please refer to your system documentation. To configure the IP address data for the BOOTP server, you will need to log in the host of BOOTP server as the superuser (root). Perform the following steps to add address entries, 1. Optionally, assign a name corresponding to the print server’s IP address. You can add this address to the /etc/hosts file, by adding a line such as: 40 AirLive P-203N User’s Manual
Page 1 and 2: P-203N 3 Ports Wired Print Server U
Page 3 and 4: CONTENTS 1. INTRODUCTION 1.1 PRODUC
Page 5 and 6: 8.5.2 Upgrade......................
Page 7 and 8: 1.2 Product Package This package co
Page 9 and 10: Because print server supports IPX/S
Page 11 and 12: UNIX (include HP/UX, SCO Unix, SunO
Page 13 and 14: NetWare Network (see below) 8 AirLi
Page 15 and 16: Chapter 13 In Windows XP SP2, you m
Page 17 and 18: 2. Hardware Installation 1. Unpack
Page 19 and 20: 3.2 Install Print Server driver and
Page 21 and 22: 6.The Print Server windows utilitie
Page 23 and 24: 3.3 Print Server Utilities After Pr
Page 25 and 26: Please be aware that Network Ports
Page 27 and 28: 22 AirLive P-203N User’s Manual
Page 29 and 30: Step5. Choose the suitable “Print
Page 31 and 32: Step9. You have added the printer t
Page 33 and 34: 4.1 System Architecture In Windows
Page 35 and 36: 4.3 User Installation and Setup Aft
Page 37 and 38: 5.1 System Architecture We implemen
Page 39 and 40: 5.2 NetWare 3.x/4.x/5.x Installatio
Page 41 and 42: 14. Select Queues Serviced by Print
Page 43: 6.1 Introduction The print server i
Page 47 and 48: 6.4 Verify Print Server’s IP Addr
Page 49 and 50: :rm=203.66.191.186:\ :rp=lpt1:\ :lf
Page 51 and 52: 7.2 Search for All Available Print
Page 53 and 54: 7.4 Setup the Print Server Click
Page 55 and 56: 7.6 TCP/IP Configuration Double Cli
Page 57 and 58: 7.7 Netware Print Server Configurat
Page 59 and 60: 7.9 Bonjour Configuration Bonjour t
Page 61 and 62: 7.11 SMB Configuration SMB Group Na
Page 63 and 64: Note that before you upgrade the fi
Page 65 and 66: Step 2: Select to enable required p
Page 67 and 68: 62 AirLive P-203N User’s Manual
Page 69 and 70: 8. Web Management 64 AirLive P-203N
Page 71 and 72: 8.2 Login You may use any Web Brows
Page 73 and 74: 8.3.2 Printer The Print Server can
Page 75 and 76: 8.3.4 SMB This page lists the SMB g
Page 77 and 78: 8.3.7 AppleTalk This page lists App
Page 79 and 80: 8.4.1.1 Admin Password It allows yo
Page 81 and 82: 8.4.2 TCP/IP You can configure the
Page 83 and 84: 8.4.4 SNMP The print server support
Page 85 and 86: 8.4.6 AppleTalk AppleTalk is a data
Page 87 and 88: 8.4.8 Save Settings You can click t
Page 89 and 90: 8.5.2 Upgrade You can upgrade new f
Page 91 and 92: 8.5.4 Restore System To apply the s
Page 93 and 94: 9.2 Login Execute the Telnet client
Page 95 and 96:
applezone printertype1 SMBDG SNMPC
Page 97 and 98:
SNMPC SNMPL port1 DHCPS DHCP applet
Page 99 and 100:
get argument ipconfig reboot exit 9
Page 101 and 102:
10.2 System Setup 10.2.1 Print Serv
Page 103 and 104:
of the URL is http://192.168.3.66:6
Page 105 and 106:
100 AirLive P-203N User’s Manual
Page 107 and 108:
Step4. Click “Add” to add the n
Page 109 and 110:
Step7. successfully. You can print
Page 111 and 112:
Step1. Click “Yes” on the above
Page 113 and 114:
Step4. The “Windows Firewall” s
Page 115 and 116:
13. Windows XP SP2 Setup In Windows
Page 117 and 118:
Step4. Select “Exceptions” tab
Page 119:
Step8. Click “Ok”. You have com
show all

P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?