cuaengineer - the School of Engineering - The Catholic University of ...

cuaengineer
■ Lade, P.V., “Soil Constitutive Modeling for Engineers:
Fundamentals, Evaluations and Calibration,”
two-day short course presented for
ASCE in Las Vegas, Nev., Jan. 2008.
■ Lade, P.V., “Analysis and Prediction of Shear
Banding Under 3D Conditions in Granular Materials,”
presented at Department of Civil and
Environmental Engineering, Louisiana State
University, Baton Rouge, La., Feb. 18, 2008.
■ Lade, P.V., “Soil Constitutive Modeling for Engineers:
Fundamentals, Evaluations and Calibration,”
two-day short course presented for
ASCE in Denver, Colo., May 2008.
■ Lade, P.V., “Soil Constitutive Modeling for
Engineers: Fundamentals, Evaluations and
Calibration,” two-day short course presented
at ExxonMobil Research and Engineering,
Annandale, N.J., Oct. 2008.
■ Lade, P.V., “Assessment of test data for
selection of 3-D failure criterion for sand,”
Haythornthwaite Distinguished Lecture
presented at Department of Civil and
Environmental Engineering, Temple University,
Philadelphia, Pa., Nov. 2008.
■ Lade, P.V., “Failure Criterion for Cross-
Anisotropic Soils,” Journal of Geotechnical
and Geoenvironmental Engineering, ASCE,
Vol. 134, No. 1, pp. 117-124, 2008.
■ Lade, P.V., Nam, J. and Hong, W.P., “Shear
Banding and Cross-Anisotropic Behavior
Observed in laboratory Sand Tests with
Stress Rotation,” Canadian Geotechnical
Journal, Vol. 45, No. 1, pp. 74-84, 2008.
■ Gdela, K., Pietruszczak, S., Lade, P.V., and
Tsopelas, P., “On Colles’ Fracture: An Experimental
Study Involving Structural and Material
Testing,” Journal of Applied Mechanics, Vol.
75, pp. 031002-1-10, May 2008.
■ Wood, F.M., Yamamuro, J.A., and Lade, P.V.,
“Effect of Depositional Method on the
Undrained Response of Silty Sand,” Canadian
Geotechnical Journal, Vol. 45, No 11, pp.
1525-1537, Nov. 2008.
■ Yamamuro, J.A., Wood, F.M., and Lade, P.V.,
“Effect of Depositional Method on the
Microstructure of Silty Sand,” Canadian
Geotechnical Journal, Vol. 45, No. 11,
pp.1538-1555, Nov. 2008.
■ Lade, P.V., Nam, J. and Hong, W.P., “Interpretation
of strains in torsion shear tests,” Computers
and Geotechnics, Vol. 36, No. 1-2, pp.
211-225, Jan./March 2009.
■ Lucko, G., “A new paradigm for modeling,
analysis, and optimization of linear scheduling
method,” invited lecture, Department of Civil
and Environmental Engineering, University of
Maryland, College Park, Md., 2009.
■ Lucko, G., “Calculating float in linear schedules
with singularity functions,” 2008 Winter
Simulation Conference, Miami, Fla., 2008.
■ Lucko, G., Benjamin, P. C., and Madden, M. G.,
“Harnessing the power of simulation in the
project management/decision support aspects
of the construction industry,” 2008 Winter
Simulation Conference, Miami, Fla., 2008.
■ Lucko, G., “Analysis of linear schedules with
singularity functions versus critical path
method,” 2008 5th Project Management
Institute College of Scheduling Annual
Conference, Chicago, Ill., 2008.
■ Lucko, G., and Rojas, E.M., “Research validation
in the construction domain,” Proceedings
of the 2009 Construction Research Congress,
Seattle, Wash., 2009, pp. 1449-1458.
■ Lucko, G., and Mitchell, Z.W., “Preparation of
incongruous economic datasets for regression
analysis,” Proceedings of the 2009 Construction
Research Congress, Seattle, Wash., 2009, pp.
1115-1124.
■ Lucko, G., and Peña Orozco, A., “Calculating
float in linear schedules with singularity functions,”
Proceedings of the 2008 Winter Simulation
Conference, Miami, Fla., 2008, pp.
2512-2518.
■ Lucko, G., Benjamin, P. C., and Madden, M. G.,
“Harnessing the power of simulation in the
project management/decision support aspects
of the construction industry,” Proceedings of
the 2008 Winter Simulation Conference,
Miami, Fla., 2008, pp. 2479-2487.
■ Lucko, G., “Analysis of linear schedules with
singularity functions versus critical path
method,” invited paper (peer-reviewed),
Proceedings of the 2008 5th Project Management
Institute College of Scheduling Annual
Conference, Chicago, Ill., 2008.
■ Lucko, G., and Rojas, E.M., “Research validation
in the construction domain: challenges and
opportunities,” invited technical paper (peerreviewed),
in print, Special Issue on Research
Methodologies in Construction Engineering
and Management, Journal of Construction
Engineering and Management, 2009.
■ Lucko, G., and Peña Orozco, A.A., “Float types
in linear schedule analysis with singularity
functions,” in print, Journal of Construction
Engineering and Management, May 2009.
■ Lucko, G., “Productivity Scheduling Method:
Linear Schedule Analysis with Singularity
Functions,” Journal of Construction Engineering
and Management, Vol. 135, No. 9, pp. 246-253,
April 2009.
■ Brennan, D., Lum, P.S., Gilmore, B., Tran, B.,
Taub, E., and Uswatte, G., “Developing a platform
for home-based upper extremity stroke
rehabilitation,” Platform presentation at the
14th Annual International Meeting and Exposition
of the American Telemedicine Association,
Las Vegas N.V., 2009.
■ Metzger, A., Lum, P.S., Schabowky, C., Holley,
R., Monroe, B., and Dromerick, A., “Upper
extremity amputees adapt to their prostheses
during reaching movements, but exhibit
abnormalities with their intact arm,” in Proc.
22 | cuaengineer