Peavey_Catalog

Legendary reliability and power
for touring companies and
installations
CS ®
POWER AMPS
Building on the reputation of the world-famous Peavey CS ® 800, the CS Series is the global standard
bearer for workhorse reliability. Over the years, these amps have benefited from many of Peavey’s
most popular audio innovations, including our exclusive DDT compression/anti-clipping protection.
With its 2RU design and high power ratings, this latest evolution of the CS Series is leaner, louder
and lighter than ever.
CS ® 4080 HZ
The Standard for Subwoofer AmpLIFICATION.
With a thundering 2,040 watts per channel at 4 ohms, this is
a seriously powerful subwoofer amplifier! Ideal for live sound
reinforcement, DJs and houses of worship. Features include
two temperature-dependent, variable-speed fans, exclusive DDT
speaker protection and our free extended five-year warranty.
CS ® 4000
The CS 4000 embodies the power and durability of the CS tradition
and was nominated for a prestigious TEC Award. Power
ratings for this model include 1,350 watts per channel at 4
ohms and 4,000 watts at 4 ohms bridged.
CS ® 3000
Boasting top power of 3,100 watts at 4 ohms bridged, this highpowered
CS amplifier is versatile enough to handle low-frequency
duty or the mid-range on a high-performance enclosure like the
Versarray 112. Rated for 1,065 watts per channel at 4 ohms.
CS ® 2000
This workhorse amplifier has all of the features that the CS
Series is known for, like exclusive DDT speaker protection
and dual, temperature-dependent cooling fans—plus our 5-year
extended warranty. Rated for 2,150 watts at 4 ohms bridged
and 760 watts per channel at 4 ohms.
CS ® 1400
The most economical member of the CS family is a versatile
amplifier that provides 1,400 watts at 4 ohms bridged and 500
watts per channel at 4 ohms.
Thermal Protection
The internal fans will keep the amplifier operating
well within its intended temperature
range under all normal conditions.
DC Voltage Protection
If an amplifier channel detects DC voltage
or subsonic frequencies at its output terminals,
the output triac crowbar circuitry will
activate immediately to prevent speaker
damage.
Turn-On/Turn-Off Protection
Upon powering up, the amplifier stays in
Protect mode, muting the input signal for
approximately four seconds while the
power supplies charge, then stabilizes
when power is removed.
“Just when I was about
to give up hope for power
amplifier sanity, Peavey
Electronics comes up with
a value-priced amplifier,
perfectly made to handle
4-ohm subwoofer loads
in stereo ... there should
be nothing stopping any
sound company from
buying truckloads of
these amps for road and
install usage.”
— Front of House
38 Power Amplifiers
Visit Us Online www.peavey.com