Peavey_Catalog
Peavey_Catalog
Peavey_Catalog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The best of both<br />
worlds<br />
Incredible all-tube tone with<br />
light weight<br />
Optical Compressor The<br />
VB-3 also features an all-tube<br />
optical compressor that uses<br />
a unique “feed-forward” design<br />
that is positioned between<br />
the two EQ sections. The<br />
compressor is highly sensitive<br />
and activated from the first<br />
tube stage so it can produce a<br />
wide range of compression.<br />
“Revolutionary.” That’s not our opinion. It’s what the gear experts at Bass<br />
Player magazine said about the VB-3, the groundbreaking all-tube bass<br />
amplifier from <strong>Peavey</strong>.<br />
The music industry had written off tube bass amps as having peaked<br />
decades ago. They accepted that tube amps were going to be extremely<br />
heavy and cumbersome, and either sacrificed their backs for the sake of<br />
tone or switched to solid-state technology. No longer.<br />
The VB-3 delivers 300 watts of earth-shaking low end with richly harmonic,<br />
all-tube tone at an astonishing 37 lbs. No, we didn’t leave off the third digit.<br />
But we did leave behind a ton of weight.<br />
The dual-channel VB-3 combines 3x12AX7 and 2x12AT7 preamp tubes with<br />
8xEL34 power tubes to give players tons of tone with uncharacteristically<br />
tight response for an all-tube amp. But it takes a lot of power to push<br />
those low frequencies, and that usually means heavy power transformers.<br />
Our innovative design utilizes a lightweight, world-compatible, switch-mode<br />
power supply—the first ever in a tube bass amp. Weight problem solved.<br />
Now you can have the best of both worlds: the unmatched tone of 13<br />
tubes and unbelievably light weight, plus a wealth of pro features such<br />
as 9-band EQ, semi-parametric EQ, optical compressor, overdrive and<br />
patented Resonance and Presence. The <strong>Peavey</strong> VB-3 is the rebirth of the<br />
tube bass amplifier.<br />
Graphic EQ Dial virtually<br />
any EQ curve imaginable with<br />
our vintage, three-band active/<br />
mid-cut EQ with adjustable midfrequency<br />
(200, 450, 600 or<br />
800 Hz), or combine it with the<br />
nine-band, constant-Q graphic<br />
equalizer—tuned to optimized<br />
bass guitar frequencies, with<br />
each band providing 15 dB of<br />
cut and boost.<br />
Speaker Damping<br />
<strong>Peavey</strong>’s patented<br />
Resonance and Presence<br />
controls adjust the damping<br />
factors at the low and high<br />
ends respectively, and are<br />
useful in dialing in tones for<br />
particular styles, including<br />
“tight” sounds that are not<br />
normally associated with<br />
tube amplifiers.<br />
VB-810<br />
Enclosure<br />
Voiced to match<br />
the VB-3 tube bass<br />
amplifier, the VB-<br />
810 bass enclosure<br />
features eight<br />
custom-designed<br />
10” ceramic-magnet<br />
loudspeakers in<br />
four tone chambers,<br />
and can be<br />
operated in stereo<br />
or mono modes with<br />
800 watts power<br />
handling.<br />
Call Toll Free @ 866-443-2333<br />
Bass Amplifiers<br />
85