Automatic Model Exhaust Fan - Yoton.com

Automatic Model with Internal Thermo-activated Shutters
Application
For both commercial & domestic applications including
kitchens, offices, factories and shops.
Features
- Aesthetics design in high gloss flame retardant ABS
- Unique clamps to fix fan from inside the buildings to
suit high rise apartments installation
- Quiet and Efficient
- Maintenance free motor with thermal fuse protection
- Complete with window fixing kit
- Inbuilt thermal actuator shutter of silent operation
- Optional P.I.R. sensor
- Optional delay timer
- Optional humidity control switch
- BEAB & CE approved
- Complies with IEC 60335-2-80:2002 + A1 : 2004,
EN 60335-1:1994+A1, A11 to A14
- Max. operating temperature: 40 o C
- Suitable for 90% R.H.
- British made
Technical Data Max. Pressure Extract Rate Sound Volume Power Consuming
XF150A-YT 50 p.a. 0.077 m 3 /sec 40 dB(A) 45 watts
WF230A-YT 50 p.a. 0.185 m 3 /sec 53 dB(A) 80 watts
WF300A-YT 60 p.a. 0.283 m 3 /sec 60 dB(A) 120 watts
Dimension (mm) A B C Window Opening
XF150A-YT 205 70 60 184mm ø hole
WF230A-YT 286 125 25 260mm ø hole
WF300A-YT 362 145 29 320mm ø hole

Construction
- Designed to work effectively, the axial flow fans are
quite, efficient and can be wall, ceiling, or window
mounted.
- This series is designed for simple installation, and
has a powerful extract rate.
- Available as single fan units or in kit form, this is
ideally suited to use in domestic and commercial
applications including bathrooms, kitchens, utility
rooms, restaurants, hotels, offices and shops.
- Power is provided by a single phase induction
motor with pre-oiled bearings for a long,
maintenance-free life.
- Comply with the 2006 Building Regulations on
Ventilation (F1)
Electrical
- 220-240V ~ A.C. 50Hz
- A double pole isolating switch, having a contact
separation of at least 3 mm in all poles, must be used
with 3 amp fuse fitted.
- The fan must not be accessible to person using
either the shower or the bath and mounted at
minimum of 1.8 metres from floor.
- These fans are double insulated and do not require
earthing.
- All wirings must comply with current Regulations.
- Installation must be carried out by registered
electrical workers.
AVAILABLE THROUGH
MANROSE MANUFACTURING LTD
8G BEDFORD AVENUE, SLOUGH,
BERKSHIRE SL1 4RA
Telephone: (01753) 691399
Facsimile: (01753) 692294
NOTE: Manrose reserve the right to alter and improve product specification where necessary