The applicability of soil density measurements ... - Geo-Engineering

sity measurements. The measured porosity change depends on the instrument location
and is a function of the penetration distance. This support the sensitivity of the location
of the friction sleeve as found in previous research, e.g. DeJong and Frost 2002.
Regardless of the loose or dense initial conditions the soil near the probe loosened
significantly during monotonic jacking.
REFERENCES
Been, K., Crooks, A. Becker, D.E. and Jeffries, M.G. (1986). The cone penetration
test in sands: part I, state parameter interpretation. Géotechnique, 36(2), pp. 239-249.
Bustamante, M. and Gianeselli, L. (1982). Pile Bearing capacity prediction by means
of static penetrometer, Proc. 2nd European Symposium on penetration testing, Amsterdam,
pp. 493-500.
DeRuiter, J. and Beringen, F.L. (1979). Pile Foundations for Large North Sea Structures.
Marine Geotechnology, 3(3), pp. 267-314.
DeJong, J.T. and Frost, J.D. (2002). A Multisleeve Friction Attachment for the Cone
Penetrometer. Geotechnical Testing Journal, 25(2), pp 111–127.
Dijkstra, J. (2009), On the Modelling of Pile Installation, PhD Thesis Delft University
of Technology.
Eiksund, G.R. (1994), Dynamic testing of piles, PhD Thesis NTNU, Trondheim.
Eslami, A. and Fellenius, B.H. (1997). Piezo-friction-cone penetrometer testing in
soft clays. Canadian Geotechnical Journal, 34(6), pp. 886-904.
Jamiolkowski, M., Ghionna, V.N., Lancellotta, R. and Pasqualini, E. (1988). New
correlations of penetration tests for desing practice, Proc. 1st Intl. Symposium on
Penetration Testing, Orlando, pp. 263-296.
Karthikeyan, M., Tan, S.M., Mimura, M.,Yoshimura, M. and Tee, C.R.. (2007).
Moisture Measurement by Neutron Moisture Cone Penetrometer: Design and Application.
Soils & Foundations, 47(1), pp. 109-117.
Ruygrok, P.A. (1977). Density measurement with the aid of nuclear radiation. LGMmededelingen,
18(2/3), pp. 70-73.
Schmertmann, J.H..(1978). Guidelines for Cone Penetration Test: Performance and
Design, FHWA-TS-209.
Shibata, T., Mimura, M., Shrivastava, A.K., and Nobuyama, M. (1992). Moisture
Measurement by Neutron Moisture Cone Penetrometer: Design and Application.
Soils & Foundations, 32(4), pp. 58-67.
Teferra, A.(1974).Beziehungen zeischen Reibungswinkel, Lagerungsdichte und
Sondierwiderständen nichtbindiger Böden mit verschiedener Kornverteilung, PhD
Thesis Technischen Hochschule Aachen.
Telford, W. and Geldart, L. (1990). Applied Geophysics Second Edition. Cambridge
University Press, Cambridge.
Vlasblom, A. (1977). Electrical density measurements. LGM-mededelingen, 18(2/3),
pp. 69-70.