Download PDF - Hill Residential Systems

Lutron® shading solutions | product guide 

Sivoia® QS 

Sivoia® QS Wireless 

Sivoia QED®

Lutron® shading solutions product guide | table of contents 

Transforming daylight.......................................02 

Drapery track 

Sealed battens.............................................87 

Sivoia QS Wireless wiring overview................122 

Product line.....................................................03 

System selection process................................48 

The Gallery Collection 

Power panel wiring diagram........................123 

Innovations in daylight control..........................04 

System overview.............................................50 

Fabric specs matrix......................................88 

Power panel...............................................124 

Electronic Drive Unit (EDU)...............................05 

Mounting options.............................................53 

Fabric rules...................................................90 

Lutron supplied cable.................................125 

Shade Configuration Tool (SCT).......................06 

System installation...........................................54 

The Avant CollectionTM 

Sivoia QED wiring overview............................126 

Curved drapery track.......................................55 


Individual transformers................................127 

Roller shades 

Track splicing...................................................56 

Fabric rules...................................................94 

Power panel...............................................128 


Manual open feature........................................57 

Customer’s own material spec process........95 


Roller shade overview......................................10 

Pinch pleat drapery panels..............................58 

Stocking categories......................................96 


roller 20TM.........................................................12 

Ripplefold drapery panels................................59 

roller 64TM.........................................................14 

Finished drapery panels...................................60 

Controls 

Integration with A/V and lighting systems 

roller 100TM / roller 150TM / roller 200CW............16 

Cornices..........................................................61 

seeTouch® keypads.........................................98 

Single room...................................................132 

Angled coupler................................................22 

System capacities...........................................62 

Engraving options..........................................100 

Whole home..................................................133 

WIDR tube option............................................23 

Control technology overview..........................101 

Whole building...............................................134 

roller 225TM.......................................................24 

Kirbé® vertical drapery system 

Sivoia® QS controls 

Third party integration....................................135 

Large pocket...................................................26 


seeTouch® QS keypads..............................102 

Custom pocket................................................27 

System components.......................................68 

GRAFIK Eye® QS........................................103 

Specification 

Cable guided shades.......................................28 

Sivoia QS Wireless controls 

The Lutron difference.....................................136 

Manual shades................................................29 

Roman shades 

Sivoia QS Wireless keypads.......................104 

Applications.....................................................30 


RF remote control options..........................106 

Fabric quick reference guide............................72 

RadioRA® 2 integration...............................108 

HyperionTM solar-adaptive shading 

Woven wood quick reference guide.................74 

Sivoia QED® controls 

Commercial total light control..........................32 

seeTouch keypads......................................109 


NEW Venetian blinds 

IR remote controls......................................110 

System components.......................................34 


Lutron® dimmers............................................112 

Example..........................................................36 

Dimensions......................................................78 

Lutron accessories........................................114 

Tensioned shades 

Fabric selection 

Wiring 


Fabric selection chart......................................80 

Sivoia QS wiring overview..............................116 


Fabric overview...............................................81 


Mounting options.............................................42 

The Classico Collection 

QS Link power supply................................119 

Measuring instructions.....................................44 


Power panel...............................................120 

Stocking categories......................................84 


Fabric rules...................................................85 

Bottom bars.................................................86 

Cover photo © Christopher Barrett: Johnson Controls, Inc., featuring Sivoia® QS roller shades, Quantum® total light 

control management, HyperionTM solar adaptive shading 

Lutron | 01

Lutron® shading solutions | transforming daylight 

Lutron® shading solutions | product line 

Lutron has been the world’s leading manufacturer of lighting control systems for 

50 years. Lutron has opened up a new world of possibilities by seamlessly and easily 

integrating electric and daylight control systems with a focus on innovation, world-class 

engineering, and customer service. Lutron blends technology with design and 

environmental sensitivity to provide the ideal solution for any specification. 

Applications 


• Inside, recessed, and outside surface mounting options 

• Light blocking fascia eliminates gaps around fabric when closed 

• Pre-assembled shipping available to make installation more convenient 

(for shades up to 30 sq. ft.) 

Kirbé® vertical drapery system 

• Exclusive to Lutron – an industry first 

• Elimination of “stackback” with a rolling pleated fabric that rises out of view 

• Offered in several sheer colors and styles 

• Pair with a roller 64TM or roller 100TM shade for total blackout capability 

Commercial 

Increase comfort and productivity in any work 

environment: Sheer shades preserve views while 

cutting glare and thermal heat gain. Blackout 

shades block daylight at the touch of a button 

for A/V presentations and privacy. 

Lutron shading solutions product line 

Residential 

A Lutron shading system allows a homeowner 

to have control of daylight at the touch of a 

button. Enhance any room in your home with 

ultra-quiet operation. 

Roman shades with CERUS® safety technology 

• The same elegant movement and precise control as Lutron roller shades 

• The elegance of decorative pleats and flat or soft folds 

• Choose from a broad selection of natural woven woods and exclusive 

designer fabrics that have been selected to complement the Lutron 

Satin Colors® line of dimmers and lighting controls 

• Eliminates cords which may present a safety hazard to small children 

• Customer’s Own Material (COM) fabrics available 

Controllable roller shades 

• Ultra-quiet operation 

• Uniform, precision movement of multiple shades 

• Minimal, symmetrical light gaps 

• Convenient one-touch control from elegant keypads and 

intuitive handheld remotes 

• Wired and/or wireless controls 

• Manual shades also available 

Drapery track systems and finished draperies 

• Quiet, precise control of drapery 

• Left-, right-, and center-draw drapery 

• Single or dual drapery tracks available 

• Straight and custom-curved tracks 

• COM fabrics available 

NEW Venetian blinds with Intelligent Tilt AlignmentTM 

• Adjust position of blinds without affecting the angle of slats 

• Maintains uniform tilt and lift positions across multiple blinds 

• With more than 50 paints and stains, 14 aluminum choices and an array 

of decorative tapes and valance styles to select from, Lutron Venetian 

blinds can be customized to your room’s design 

• Blinds adjust to a pre-determined height and tilt angle when a preset 

is recalled 

• Multiple presets can be defined for the same blind or group of blinds 

• Venetian blind controls offer tilt adjustment buttons for precise positioning 

• Range of tilt can be adjusted from full tilt in either direction down to a 

fixed tilt angle 

Cornices 

• Available in four shapes and traditional straight style 

• Custom sizes to fit every application 

• Available in a wide variety of Lutron and Customer’s Own Material (COM) fabrics 

02 | Lutron 

Lutron | 03

Lutron® shading solutions | innovations in daylight control 

Lutron® shading solutions | Electronic Drive Unit (EDU) 

Electronic Drive Unit (Sivoia® QS shown) 

(operates roller shades, Roman shades, Kirbé® vertical drapery systems, and tensioned shades.) 

Communications circuit 

• Addresses, programs, and 

reconfigures the system from 

any system component: the EDU 

mounted in the ceiling, keypad 

installed in the wall or a handheld 

remote control 

• Eliminates the need for external 

“group controllers,” simplifying 

programming and future changes 

to the system 

Hall effect sensors 

• Measures motor position 

to ensure shades move 

in unison and in 

precise alignment 

• Digitally sets and 

stores limits 

Protection against 

electrostatic discharge 

Provides safe, controlled 

discharge of potentially 

damaging static created by 

shade fabric 

Quality and performance 

The Lutron family of quiet electronic drives 

offers convenience at the touch of a button. 

Lutron quiet electronic drive technology provides 

near-silent performance, operating shades smoothly 

and in precise alignment. 

Ultra-quiet electronic drive 

The Lutron quiet electronic drive operates roller 

shades, draperies and blinds at a near-silent level 

rated at 38 dBA at 3 ft (1 m) (roller 20 operates at 

44 dBA). 

Intelligent control 

The Lutron electronic drive unit (EDU) 

optimizes roller shade, skylight shade, drapery 

and blinds adjustment by offering programmable 

presets. Save and recall preset levels from an 

intuitive keypad. Additionally, shades will move 

smoothly, in unison, and with exact alignment. 

seeTouch® keypad (not shown actual size) 

Simplified installation 

The system can be configured and reprogrammed 

at the point of control without any rewiring, without 

access to the EDU, and without the use of a group 

controller. The mounting brackets allow an installer 

to adjust the shade’s level, projection, and side-toside 

position, all after the shade has been installed. 

Integration of daylight and electric light 

Lutron lighting control systems work together with 

controllable shading systems to offer complete 

control of all the light in any space. Adjust shades, 

draperies, and blinds as lights dim or brighten to 

generate light levels for any mood or activity. 

Microprocessor 

• Provides smooth, consistent shade 

movement. Shades align and track together. 

• Eliminates audible starts and stops 

• Stores precise, user-defined preset levels 

for each keypad 

Drapery track 

Electronic Drive Unit 

For additional drapery track 

information, see page 48. 

Back of circuit board 

Gear-motor 

• Features precision design to ensure 

ultra-quiet operation 

Electronic drive circuit 

• Variable-speed motor 

drive ensures silent, 

accurate control 

10-year power failure memory 

Records motor movements to ensure that position 

is accurately saved even if the EDU is active when 

power is interrupted 

Drapery track EDU internal components are similar to that 

of a roller shade – reconfigured to fit into a slim profile 

drapery motor while maintaining the quiet precision of 

Lutron controllable shades. 

04 | Lutron Lutron | 05

Lutron® shading solutions | Shade Configuration Tool (SCT) 

Lutron® shading solutions | roller shades 

Shade Configuration Tool (SCT) software 

This customer-acclaimed tool helps you accurately 

and quickly layout jobs, create project details for 

sign-offs, and create professional-looking 

proposals for customers. SCT checks design 

rules as you go, ensuring that the shading system 

you design can be built to your specifications. 

SCT features 

• Addition of new products: 

Lutron continues to introduce new window system 

product innovations. New products are available 

within the SCT tool for easy quoting and ordering. 

• Submittal engine 

Create job-specific submittals automatically within 

the SCT. The submittal engine includes detailed 

section views, elevations, wiring diagrams and 

more. Customizable reports ensure that all 

submittals contain only the information that 

is needed. 

• Smart Submit 

Revised interface for electronic quotes and 

orders. This system will feature greater emphasis 

on automated quoting and ordering to minimize 

lead-times while creating a more intuitive 

experience for the user. 

• Addition of various marketing materials: 

- Lineal samples 

- Demo cases 

- Fabric samples 

- Literature 

06 | Lutron 

Lutron | 07

Lutron® | roller shade system selection process 

Determine how 

roller shade 

will be installed 

Determine which control 

technology will be used 

Take 

system 

measurements 

Specify 

drive location 

for pre-wiring 

Specify 

fabric 

roll detail 

Specify 

fabric 

Specify 

lineal 

requirements 

Choose one: 

p Inside mount 

p Outside mount 

Choose one: 

p Wall mount 

p Ceiling mount 

p Jamb mount 

p Pocket mount 

(Recessed) 

p Fascia mount 

p Sivoia® QS 

- Best for whole home, commercial 

spaces and lighting integration 

systems 

p Sivoia® QS Wireless 

- Best for single room and whole 

home systems, integration with 

RadioRA® 2 systems 

p Sivoia QED® 

- Best for use with HomeWorks® 

Illumination systems 

* See page 101 for control technology 

overview matrix. 

Roller shade size = 

system width ______ x 

system height _______ 

(bracket to bracket 

measured width) 

Operator required: 

p roller 20TM 

For shades up to 

20 sq. ft. (1.86 sq. m) 

p roller 64TM 


64 sq. ft. (5.95 sq. m) 

p roller 100TM 


100 sq. ft. (9.29 sq. m) 


(QS and QS Wireless only) 


150 sq. ft. (13.9 sq. m) 

p roller 200CWTM 


200 sq. ft. (18.58 sq. m) 

(gradual shade movement) 

p Left drive 

p Right drive 

p TBD 

Specify wiring topology 

p Individual transformers 

(recommended for 

installations requiring 

local wiring) 

p Power panel 


installations requiring 

centralized wiring) 

p Regular 

(standard) 

p Reverse 


applications where 

objects such as 

handles or levers 

protrude from the 

window and may 

interfere with 

shade travel) 

p Cable-guided 

p TBD 

glass 

glass 

p SheerShade® 

Fabrics feature open 

weaves, so sunlight is 

filtered while preserving 

the view 

p Dim-out 

These fabrics permit 

some light, but are 

not open weaves, so 

the view is limited to 

shapes and shadows 

p Blackout 

These fabrics prevent 

all light from passing 

through the material 

Bottom bar* 

p Architectural half 

p Architectural exposed 

p Sealed 

p Exposed 

p Round 

p Cable-guided 

* Some fabrics limit 

bottom bar selection 

p Fascia and top 

back cover 

p Fascia only 

p Pocket with flap 

p Flap and 

hanger only 

p Top back 

cover only 

p No top treatment 

p TBD 

Blackout options 

p Side channels 

p Sill angle 

Metal color 

p Bronze 

p White 

p Clear Anodized 

p Black 



225 sq. ft. (20.9 sq. m) 

For control options, 

see page 98. 

Maximum allowable shade size may vary based on fabric selection. Contact 

Shading Quotes or use SCT for actual shade dimensions based on fabric type. 


Lutron® | roller shade overview 

NEW 

NEW 

Illustrations to 

scale - not 

actual size 

roller 20TM - page 12 roller 64TM - page 14 roller 100TM - page 16 

roller 150TM - page 16 


roller 200CW - page 16 roller 225TM - page 24 

WIDR tube option 

- page 23 

Application 

A slim profile and narrow 

width ideal for shallow 

residential window frames 

Ideal for small- to 

medium-sized windows 

Designed for windows 

approximately 10 ft. 

(3048 mm) wide. Allows 

coupling capability for up 

to 6 fabric panels. 

Designed for tall and 

coupled shades, when 

the reduced speed of a 

200CW is undesirable. 

Allows coupling 

capability for up to 

6 fabric panels. 

Features slow, gradual 

movement for large 

shades and coupling 

capability for up to 

6 fabric panels 

(shades move 5 feet 

[1524 mm] in 1 minute - 

recommended for 

commercial projects only) 

Provides a heavy-duty 

bracket and higher torque 

for much larger 

applications such as 

atriums or multi-story 

windows 

Compatible with 

roller 100TM, roller 150, 

and roller 200CW 

systems: 

Designed to reduce 

deflection for windows 

up to 15 ft. (4572 mm) 

wide 

Sound level 44dBA 38 dBA 38 dBA 38 dBA 38 dBA 38 dBA n/a 

Tube size 

(diameter of 

tube only - no 

shade fabric) 

1.25 in. 

(32 mm) 

1.625 in. 

(41 mm) 

2.56 in. 

(65 mm) 

2.56 in. 

(65 mm) 

2.56 in. 

(65 mm) 

3.75 in. 

(95 mm) 

3.0625 in. 

(78 mm) 

Lutronprovided 

pocket size 

3.5 in. d x 3.5 in. h 

(89 mm d x 89 mm h) 

3.5 in. d x 3.5 in. h 

(89 mm d x 89 mm h) 

4.75 in. d x 5.0 in. h 

(121 mm d x 127 mm h) 

4.75 in. d x 5.0 in. h 

(121 mm d x 127 mm h) 

4.75 in. d x 5.0 in. h 

121 mm d x 127 mm h) 

7 in. d x 7 in. h 

(178 mm d x 178 mm h) 

4.75 in. d x 5.0 in. h 

(121 mm d x 127 mm h) 

Dual pocket 

size (page 26) 

6 in. d x 9 in. h 

(152 mm d x 229 mm h) 

6 in. d x 9 in. h 

(152 mm d x 229 mm h) 

7 in. d x 11 in. h 

(178 mm d x 279 mm h) 

7 in. d x 11 in. h 

(178 mm d x 279 mm h) 

7 in. d x 11 in. h 

(178 mm d x 279 mm h) 

8 in. d x 14 in. h 

(203 mm d x 356 mm h) 

7 in. d x 11 in. h 

(178 mm d x 279 mm h) 

Typical 

maximum 

shade size* 

20 sq. ft. 

(1.86 sq. m) 

64 sq. ft. 

(5.95 sq. m) 

100 sq. ft. 

(9.29 sq. m) 

150 sq. ft. 

(14 sq. m) 

200 sq. ft. 

(18.6 sq. m) up to 6 

shades, 200 sq. ft. total 

225 sq. ft. 

(20.9 sq. m) 

100 sq. ft. 

(9.29 sq. m) 

Minimum 

bracket-tobracket 

width 

18.5 in. 

(470 mm) 

18.5 in. 

(470 mm) 

24 in. 

(610 mm) 

24 in. 

(610 mm) 

26.5 in. 

(610 mm) 

31.75 in. 

(806 mm) 

24-26.5 in. 

(610-673 mm) depending 

on operator chosen 

Maximum 

bracket-tobracket 

width 

79.5 in. 

(1981 mm) 

97.5 in. 

(2438 mm) 

125 in.** 

(3048 mm) 

125 in.** 

(3048 mm) 

125 in.** per panel 

(4572 mm) 

190 in. 

(5486 mm) 

180 in. 

(4572 mm) 

* Maximum allowable shade size may vary based on fabric selection. Contact 


**WIDR tube option allows for extra wide shades 


oller 20 | dimensions 

roller 20 | brackets 

roller 20 | fascia and pockets 

roller 20 | blackout 

System dimensions 

The roller 20 system utilizes a 1.25 in. 

(32 mm) roller tube to operate up to 

20 sq. ft (1.86 sq. m) of fabric.* 

A 

Front view 

B 

Universal bracket design 

• One-piece bracket for simple installation 

- Same bracket for left and right side of roller tube 

- Same bracket for ceiling, wall, and jamb mount 

• Roller tube installs with simple, 

spring-loaded design 

Standard snap-on end cap 

Provide a clean look for a system 

installed without fascia or top box. 

Available in white. 

Fascia 

roller 20 can be installed with a top/back cover 

and fascia for a clean, minimal look. Square and 

round fascia and pockets are available in white, 

black, bronze, and anodized aluminum. Custom 

colors also available. 

Square fascia 

Round fascia 

top back cover 

Blackout configuration 

Lutron® offers side channels in a width of 1.5 in., 

2.5 in. or 3.5 in. (38, 64 or 89 mm) to facilitate 

blackout conditions. 

M 

M 

Side view 

N O Front view O 

Dimensions 

F 

E 

Dual-mount roller system 

Install two fabric panels over the same 

window with this compact bracket. 

J 

Fascia end caps 

glass side 

2.75 in. (70 m) 

M 3.5 in. (89 mm) 

1.0 in. (25 mm) 

2.5 in. (64 mm)** 

(**2.5 in. is standard, but 1.5 in (38 mm) 

and 3.5 in. (89 mm) are also available.) 

H 

D 

C 

Dimensions 

0.75 in. (19 mm) symmetrical, minimum 

18.5 in. (470 mm) minimum 

2.5 in. (64 mm) 


1.65 in. (42 mm) 

1.25 in. (32 mm) 

K 

Dimensions 

5.15 in. (131 mm) 

3.5 in. (89 mm) 

9 in. (229 mm) 

6 in. (152 mm) 

1.0 in. (25 mm) 

G 

I 

glass side 

Lutron-provided pocket dimensions 

roller 20 will never require more than 3.5 in. height 

x 3.5 in. (89 mm x 89 mm) depth for installation. 

ceiling 

ML 

ML 

glass 

Side view 

x 2 

Optional side 

channel 

Fabric 

Sill angle 

Sill 

Install side 

channels backto-back 

at wide 

center mullions. 

1 in. 

(25 mm) 

The sill angle 

completes 

the blackout by 

stopping light leaks 

below the shade. 






roller 64 | fascia and pockets 



The roller 64 system utilizes a 1.67 in. 

(42 mm) roller tube to operate up to 

64 sq. ft. (5.95 sq. m) of fabric.* 

A 

Front view 

B 

Universal bracket design 

• One-piece bracket for simple installation 

- Same bracket for left and right side of roller tube 

- Same bracket for ceiling, wall, and jamb mount 

• Roller tube installs with simple, 

spring-loaded design 

Standard snap-on end cap 

Provide a clean look for a system 

installed without fascia or top box. 

Available in white. 

Fascia 

roller 64 can be installed with a top/back cover 

and fascia for a clean, minimal look. Square and 

round fascia and pockets are available in white, 

black, bronze, and anodized aluminum. Custom 

colors also available. 


Lutron® offers side channels in a width 1.5 in., 

2.5 in. or 3.5 in. (38, 64 or 89 mm) to 

facilitate blackout conditions. 

L 

L 

Side view 

Square fascia 


Round fascia 


M N Front view N 

D 

F 

Top view 

E 

Dual-mount roller system 

Install two fabric panels over the same window 

with this compact bracket system. 

Fascia end caps 

glass side 

Dimensions 

3.5 in. (89 mm) 

M 1 in. (25 mm) 

2.5 in. (64 mm)** 



J 

D 

C 

Dimensions 



3.0 in. (76 mm) maximum 


2.17 in. (55 mm) 

1.67 in. (42 mm) 

H 

K 

Dimensions 

6.0 in. (152 mm) 

3.9 in. (99 mm) 

9.0 in. (229 mm) 

6.0 in. (152 mm) 

1.0 in. (25 mm) 

G 

I 

glass 

Lutron-provided pocket dimensions 

roller 64 will never require more than 3.5 in. height 

x 3.5 in. depth (89 mm x 89 mm) for installation. 

ceiling 

L 

L 

glass 

Side view 

x 2 

Optional side 

channel 

Fabric 

Sill angle 

Sill 

Install side 


at wide 


1 in. 

(25 mm) 


completes 







oller 100 | roller 150 | roller 200CW 


These three systems utilize a 2.5 in. (64 mm) roller 

tube as well as identical brackets. 

Bracket design benefits 

Brackets employ a two-piece design to maximize 

ease and flexibility of installation. 

Wall mount 

G 

F 

Dimensions 

4.43 in. (112 mm) 


The roller 100 operates up to 100 sq ft. 

(9.29 sq. m) of fabric.* The roller 150 operates up 

to 150 sq ft. (14 sq. m) of fabric.* This has more 

torque than the roller 100. The roller 200CW 

operates up to 200 sq ft. (18.6 sq. m) of fabric. 

Shades move slowly and are best suited for open 

office spaces or common areas. 

Proprietary bracket designs for various 

applications include: 

• Wall mount 

• Ceiling mount 

• Jamb mount 

Wall mount 

Note: shown 

as regular roll 

Note: The roller 200CW moves at approximately 

1 in./second (depending on fabric selection), which 

is very slow even though it is the same size tube 

as the roller 100. The roller 100 can not move at 

that slow of a speed, so there can be no Intelligent 

Hembar AlignmentTM between the two. 

A 

B 

Ceiling mount 

Ceiling mount 

H 

I 

L 

J 

K 

Dimensions 

4 in. (102 mm) maximum 

3.29 in. (84 mm) 

0.15 in. (4 mm) 


4.4 in. (112 mm) 

Front view 

D 

C 

Jamb mount 

Top view 

M 

E 

C 

Dimensions 


24 in. (610 mm) (minimum system width) 

26.5 (673 mm) for roller 200CW 

4 in. (102 mm) maximum 

4.43 in. (112 mm) 

1.13 in. (29 mm) maximum projection 

Jamb mount 

O 

Dimensions 

M 5.12 in. (130 mm) maximum 

4.44 in. (113 mm) 


Note: 

Fabric projection adjustable 0.5 in. (13 mm) 


customer service or use SCT for actual shade dimensions based on fabric type. 



fascia and pockets 

pocket dimensions 

Bracket features 

Shade centering and leveling 

A benefit of the two-piece bracket design is the 

ability to laterally adjust the roller shade after 

installation to ensure a centered mounting. 

Roller shade can also be leveled easily without 

re-mounting the bracket. 

Dual-mount bracket 

A common roller shade application is the 

use of two fabrics on one window, typically 

a sheer and a blackout. Fabric unrolls 

closest to glass. The dual mount uses 

a two-piece bracket. 

Fascia and top back covers 

Lutron® roller shades can be installed within fascia 

and top back covers. This two-piece enclosure 

both conceals the product and affords accessibility 

for adjustment and maintenance. Square 

and curved fascia and pockets are available in 

white, black, bronze, and anodized aluminum. 

Custom colors also available. 

Pocket dimensions 

Pockets are available for roller 100TM, 

roller 150TM, and roller 200CW systems. The 

pocket mount uses a two-piece bracket. 

Level 

adjustment 

T 

P 

Add side channels and sill angles to achieve 

blackout conditions with opaque fabrics. 

Fascia 

Top back cover 

S 

Q 

Optional 

end cap 

V 

Lateral adjustment 

R 

glass 

Projection adjustment 

The bracket allows for projection adjustment 

of the roller tube during and after installation. 

Dimensions 

P 6.5 in. (165 mm) 

11 in. (279 mm) 

1 in. (25 mm) 

8.22 in. (209 mm) 

T 7 in. (178 mm) 

Fascia and top/back cover with 

side channel and sill angle (page 20) 

The fascia mount uses a two-piece bracket. 

U 

U 

ceiling 

Lutron® pocket dimensions 

V 

W 

4.75 in. (121 mm) 

5 in. (127 mm) 

W 

glass 

Projection 

adjustment 

screws 

Up to 0.5 in. (13 mm) 

projection adjustment 

Dimensions 

U 4.2 in. (107 mm) 

Note: Fascia and top back cover can be used 

independently of each other. 




Lutron® offers side channels in a width of 1.5 in., 

2.5 in. or 3.5 in. (38, 64 or 89 mm) to facilitate 


NEW: In-line coupled roller system 

Up to six shade panels can be coupled, 

allowing for the entire assembly to be powered 

by a single electronic drive unit (EDU). 

Coupling sub-brackets 

Wall mount coupling sub-bracket 

Fascia mount coupling sub-bracket 

S 

TH 

Side view 

Dimensions 

2.0 in. (51 mm) 

3.0 in. (76 mm) 

Dimensions 

6.16 in. (156 mm) 

4.04 in. (103 mm) 

U 

Dimensions 

T 

U 

V 

4.75 in. (121 mm) 

5 in. (127 mm 

1 in. (25 mm) 

2.5 in. (64 mm)** 


shown including 

side channels 



V 

Side view 

V 

x 2 

Optional side 

channel 

Fabric 

Sill angle 

Sill 

V 

V 

Front view 

Install side 


at wide 

center mullions 

1 in. 

(25 mm) 

V 


completes 




• Simple installation - no pins needed 

• Increased efficiency by operating multiple shades 

with one EDU 

• Offers 1.5 in. (38 mm) minimum light gap 

between panels 

• Can be assembled with any bracket configuration 

(see page 21) 

• Offers phase adjustment, which allows the 

bottom bars to be aligned after installation 

• Allows precise bottom bar alignment 

Note: Drive side minimum width for a coupled 

shade is 25.5 in. (648 mm) 

Coupling adjustment 

Use an allen key to align bottom bars 

while shades are in place. Use set screws 

to adjust alignment. 

Ceiling mount coupling sub-bracket 

(Top view) 

Dimensions 

2.0 in. (51 mm) 

3.08 in. (78 mm) 

Jamb mount coupling sub-bracket 

Dimensions 

3.31 in. (84 mm) 

4.22 in. (107 mm) 

Pocket mount coupling sub-bracket 

Dimensions 

8.48 in. (216 mm) 

4.17 in. (106 mm) 

Universal dual narrow sub-bracket 

Dimensions 

3.75 in. (90 mm) 

8.25 in. (209 mm) 


NEW | angled coupler 

NEW | WIDR tube option 

45˚ 

Allows up to 45˚ angle 

Angled coupler 

Removes need for multiple shade drives in angled 

applications – resulting in significant cost reduction. 

Allows up to 45˚ angle between coupled shades 

(22.5˚ maximum each side of the coupler bracket). 

One size fits all angles, 0˚-15˚ or 0˚-45˚. 

Ultra-quiet low-drag coupler components allow 

up to three shades per roller 100TM, roller 150TM or 

roller 200CW system. 

Angled coupler parameters: 

• Ceiling- and pocket-mount capable 

• Maximum angle: 45˚ (22.5˚ each side) 

• Maximum number of panels: 3 

(per roller 100, roller 150TM or roller 200CW) 

• Minimum drive side panel width: 25.5 in. (648 mm) 

• Minimum non-drive side panel width: 14 in. (356 mm) 

Angled coupler template 

Measuring template for angled shades ensures precise 

and easy installation (Lutron template MUST be used 

when providing measurements) 

Plastic angled coupler templates can be ordered 

through Customer Service: 

• 0˚-15˚ Narrow Angle Coupler Template (P/N 045315) 

• 0˚-45˚ Wide Angle Coupler Template (P/N 045318) 

regular roll 

reverse roll 

0˚-45˚ Angled coupler 

Shade 

angle 

(total) 

Regular roll 

light gap 

Reverse roll 

light gap 

0˚ 1 5/16 in. (33 mm) 1 5/16 in. (33 mm) 

2˚ 1 5/16 in. (33 mm) 1 1/4 in. (32 mm) 

4˚ 1 5/16 in. (33 mm) 1 1/4 in. (32 mm) 

6˚ 1 3/8 in. (35 mm) 1 1/4 in. (32 mm) 

8˚ 1 3/8 in. (35 mm) 1 3/16 in. (30 mm) 

10˚ 1 7/16 in. (35 mm) 1 3/16 in. (30 mm) 

12˚ 1 7/16 in. (35 mm) 1 3/16 in. (30 mm) 

14˚ 1 7/16 in. (35 mm) 1 1/8 in. (29 mm) 

16˚ 1 1/2 in. (38 mm) 1 1/8 in. (29 mm) 

18˚ 1 1/2 in. (38 mm) 1 1/8 in. (29 mm) 

20˚ 1 1/2 in. (38 mm) 1 1/16 in. (29 mm) 

22˚ 1 9/16 in. (40 mm) 1 1/16 in. (29 mm) 

24˚ 1 9/16 in. (40 mm) 1 1/16 in. (29 mm) 

26˚ 1 5/8 in. (41 mm) 1 in. (25 mm) 

28˚ 1 5/8 in. (41 mm) 1 in. (25 mm) 

30˚ 1 11/16 in. (43 mm) 1 in. (25 mm) 

32˚ 1 11/16 in. (43 mm) 1 in. (25 mm) 

34˚ 1 11/16 in. (43 mm) 15/16 in. (24 mm) 

36˚ 1 3/4 in. (44 mm) 15/16 in. (24 mm) 

38˚ 1 3/4 in. (44 mm) 15/16 in. (24 mm) 

40˚ 1 3/4 in. (44 mm) 7/8 in. (22 mm) 

42˚ 1 13/16 in. (46 mm) 7/8 in. (22 mm) 

44˚ 1 13/16 in. (46 mm) 7/8 in. (22 mm) 

45˚ 1 13/16 in. (46 mm) 13/16 in. (21 mm) 

0˚-15˚ Angled coupler 

(use where possible to minimize light gaps) 

Shade 

angle 

(total) 

Regular roll 

light gap 

Reverse roll 

light gap 

0˚ 7/8 in. (22 mm) 7/8 in. (22 mm) 

2˚ 7/8 in. (22 mm) 13/16 in. (21 mm) 

4˚ 7/8 in. (22 mm) 13/16 in. (21 mm) 

6˚ 15/16 in. (24 mm) 13/16 in. (21 mm) 

8˚ 15/16 in. (24 mm) 3/4 in. (19 mm) 

10˚ 1 in. (25 mm) 3/4 in. (19 mm) 

12˚ 1 in. (25 mm) 3/4 in. (19 mm) 

14˚ 1 in. (25 mm) 11/16 in. (17 mm) 

15˚ 1 in. (25 mm) 11/16 in. (17 mm) 

With Integrated Deflection Reduction (WIDR) 

Longer window span for roller 100TM, roller 150TM and 

roller 200CW shades: 

• Allows for shades up to 180 in. (4572 mm) wide with 

minimal deflection 

• Reduced waves and V’s in fabrics 

• Utilizes all existing roller 100 bracket and top-treatment options 

• Utilizes coupling systems for extra wide coupled shades 

• Tube diameter = 3.0 in. (78 mm) vs. standard roller 100 

= 2.5 in. (63.5 mm) 

WIDR tube has a larger and stronger cross-section to prevent 

deflection over standard tube options. It allows for wider shades 

to be mounted in residential- and commercial-sized pockets, 

while maintaining the quiet precision of Lutron® electronic 

drive technology. 

Dimensions: 

• Tube diameter: 3.0 in. (78 mm) 

• Pocket size: 4.75 in. x 5.00 in. 

(121 mm x 127 mm) standard pocket 

• Typical max. size: 100 sq.ft. (9.29 sq. m) 

• Min. bracket to bracket width: 24 in. (610 mm) 

• Max. bracket to bracket width: 180 in. (4572 mm) 

WIDR tube parameters: 

• Widest shade: 180 in. w (4572 mm) 

• Longest shade: 180 in. h (4572 mm) 

• Typical shade: 144 in. w x 100 in. h 

(3658 mm x 2539 mm) 

• Minimum system width: 24 in. w x 24 in. h 

(610 mm x 610 mm) 

* Note: Some top treatments may be unavailable. 

Tube cross-section 

(not actual size) 

standard tube 

WIDR tube 




roller 225 | pockets 



The roller 225 provides a heavy-duty bracket 

and higher torque for much larger applications 

such as atriums or multi-story windows. 

The roller 225 system: 

• Utilizes a 3.75 in. (95 mm) diameter tube 

• Employs heavy duty brackets designed for 

larger systems 

Pocket installation* 

Lutron® recommends a 7 in. x 7 in. 

(178 mm x 178 mm) pocket for 

recessed installations. 

Blackout configuration (pocket only) 

Lutron offers side channels in a width of 

2.5 in. or 3.5 in. (64 or 89 mm) to facilitate 


I 

J 

A 

JH 

Front view 

B 

roller 225 

bracket assembly 

I 

Side view 

C 

Top view 

C 

C 

Dual-mount bracket 

A common roller shade application is the 

use of two fabrics on one window, typically 

a sheer and a blackout. Fabric unrolls 

closest to glass. The dual mount uses 

a two-piece bracket. 

Dimensions 

7 in. (178 mm) 

glass 

Dual pocket installation* 

Lutron recommends an 8 in. x 14 in. (203 mm x 

356 mm) pocket for recessed dual installations. 

K 

Dimensions 

7 in. (178 mm) 

1 in. (25 mm) 

2.5 in. (64 mm) 

3.5 in. (89 mm) 

L 

Front view 

L 


shown including 

side channels. 

E 

D 

x 2 

Install side 


at wide 


1 in. 

(25 mm) 

Dimensions 


31.62 in. (803 mm) typical minimum 

6 in. (152 mm) 


projection into room 

5.25 in. (133 mm) 

GLASS/ WALL SIDE 

Dimensions 

7.07 in. (180 mm) 

7.61 in. (193 mm) 

11.48 in. (192 mm) 

glass 

* Pocket available. See pages 26-27. 

Side view 

Optional side 

channel 

Fabric 

Sill angle 

Sill 


completes 





Lutron® | large pocket 

Lutron® | custom pocket 

Large pocket is available in the following sizes for all dual applications (for use 

with Lutron dual pocket brackets) and large single applications. Available with 

splice bar, flap, hanger, air vents, and ceiling tile support. 

6 in. w x 9 in. h 

(152 mm x 178 mm) 

for dual roller 20TM 

and dual roller 64TM 

applications 

7 in. w x 11 in. h 

(178 mm x 279 mm) 

for dual roller 100TM, 

dual roller 150TM, and 

dual roller 200CW 

applications 

Custom pockets are available in a wide variety of 

user-specified sizes for any application. 

All custom and dual pockets are available with splice bar 

(allows for multiple pocket alignment), integrated air vents, 

tile support (for ceiling tile integration), and flap and hanger 

(3 flap sizes available). 

All custom and dual pockets are 0.06 in (1 mm) thick. 

Note: 

Pocket size (Linear dimension) cannot exceed 46 in. 

(1,168 mm) [2X+Y]. 

Maximum length = 120 in. (3048 mm) 

T 

T 

T 

8 in. w x 14 in. h 

(203 mm x 356 mm) 

for dual roller 225 

applications 

7 in. w x 7 in. h 

(178 mm x 178 mm) 

for single roller 225TM 

applications 

Optional flap and hanger 

Flap sizes available: 

2 in. (51 mm) 

3 in. (76 mm) 

5 in. (127 mm) 

12 in. w x 6 in. h 

(305 mm x 152 mm) for horizontal 

dual roller 100TM, dual roller 150TM, 

and dual roller 200CW applications 

(dual flap available) 

Optional splice bar 

for multiple pocket alignment 

Optional air vents 

24 sq. in. per linear foot 

(1,548 sq. cm) 

tile support 

ceiling tile 

Optional tile support 

for integration with ceiling tile 


NEW | cable guided shades 

Lutron® | manual shades 

Cable guided shades allow shading with angled windows 

and management of shade “sway” within areas of high 

velocity airflow. 

• Allows for up to 20˚ angles (positive and negative) 

• Maximum shade height of 20 ft. (6096 mm) 

• For use with architectural bottom bars or 

oval hembars 

• Retrofit kit available for existing shades with 

architectural bottom bar 

• Compatible with wall, ceiling and jamb recessed brackets 

• Cable thickness: 2 sizes available 

• Marine-grade stainless steel turnbuckle and stainless steel 

cable mounting brackets 

• Cables are nylon-coated galvanized steel with stainless 

steel threaded ends 

Lutron is ready to address all of your commercial shading needs. Roller clutch 

manual shades allow for one-name specification on projects that incorporate 

motorized shading but also require manual solutions. 

Each size refers to pounds of fabric weight. Clutch system allows for minimal effort 

when lifting heavy fabric panels and shades remain at desired positions. 

Multiple tube sizes are available to manage 

deflection in wide shades: 

• 1 in. (25 mm) steel tube: Available with V8 

• 1.375 in. (35mm) steel tube: Availiable with V16 and V24 

• 1.75 in (44 mm) steel tube: Available with V16 and V24 

• 2 in (51 mm) aluminum tube: Available with V16 and V24 

• 2.5 in (64 mm) aluminum tube: Available with V24 with spring assist 

Compatible with fascia and pocket mount applications. 

Chain tensioner device standard. 

Clutch size 

V8 

V16 

V24 

V24 with spring assist 

Capacity 

8 lbs. 

16 lbs 

24 lbs 

30 lbs. 

20˚ 

20˚ 

V8 V16 V24 

Spring 

Assist 


oller shades | applications 

Lutron® shading solutions | HyperionTM 

Small- to medium-sized windows 

pages 12 and 14 

roller 20TM and roller 64TM have small 

tube diameters that make them the 

perfect solution for small- to medium-sized 

windows. Control daylight and create 

privacy in the office or at home. 

Curtain walls - page 16 

Couple up to 6 shades as a single group 

with a single Electronic Drive Unit (EDU) with 

roller 200CW or roller 150TM. 

Wide windows - page 23 

WIDR tube option designed to minimize 

deflection for wide windows with average height. 

Optional tube size for roller 100, roller 150, 

and roller 200CW 

Floor-to-ceiling windows - page 16 

roller 100TM is designed for larger windows, 

such as those in floor-to-ceiling applications. 

These windows are often found in offices 

and condominiums. Preserve the view while 

increasing productivity. 

Multi-story windows - page 24 

roller 225TM provides a heavy-duty bracket and 

higher torque for much larger applications. Add 

precision control of daylight in atriums, lobbies, 

and in areas with multi-story windows. 

Note: Roller tubes not shown actual size. 

30 | Lutron 

Lutron | 31

Lutron® | commercial total light control 

Lutron® | HyperionTM overview 

Total light control solutions 

Basic standalone 

solutions 

Single-space 

solutions 

Small area solutions 

These solutions operate independent of one another. 

They are the simplest and lowest-cost way to start 

saving energy today. 

These solutions add the ability to control several lights 

together by occupancy sensors, daylight sensors, and 

infrared or radio-frequency remote controls. 

For more advanced and scalable light and shade 

control, use Lutron QS components to build wired or 

wireless minisystems. 

Products* 

Maestro® occupancy 

sensor 

Maestro WirelessTM 

dimmer, PicoTM, 

Radio Powr SavrTM 

daylight sensor, 

Radio Powr Savr 

occupancy sensor, 

Plug-in lamp dimmer, 

Sivoia® QS shades 

GRAFIK Eye® QS, 

EcoSystem® ballast, 

Sivoia QS shades 

What is Hyperion 

Hyperion is an automated shading system that 

adjusts Sivoia® QS shades throughout the day 

based on the sun’s position. It maximizes 

functional daylight in a space while minimizing 

glare and solar heat gain to create a comfortable 

work environment. 

Seasonal solar variation: 

The position of the earth relative to the sun 

changes throughout the year. Consequently, 

the sun will be in a different position at noon on 

June 21st than it is at noon on December 21st. 

Hyperion effectively manages daylight entering 

the space by incrementally changing the shade 

adjustment schedule of each façade on a daily 

basis, maximizing comfort and productivity. 

Hyperion can function as a stand-alone system 

or as a key feature of the Quantum® Total Light 

Management system. 

What are the benefits 

Increase comfort and productivity 

Preferred light levels and automated shade control 

are conducive to a productive work environment 

Create a more flexible space 

Shade groups easily re-configure to allow for 

flexible use of a space without rewiring. Each 

group can be tuned to meet specific 

daylight needs 

Save electricity and protect 

the environment 

Reduce greenhouse emissions by eliminating 

unnecessary energy use 

Save money 

Lower operating costs with Hyperion’s 

minimal maintenance requirements and through 

electricity savings with daylight harvesting, and 

reduced HVAC costs 

Entire floor solutions 

These mini-systems can be easily expanded at 

any time to control multiple rooms or larger spaces 

and are suitable for both new construction and 

retrofit solutions. 

QS devices can easily be linked across multiple 

rooms—up to an entire floor—to provide significant 

yearly savings from ongoing reduced energy costs, 

increased lamp life, and lower maintenance costs. 

This highly scalable solution can be easily 

reconfigured, with no need for rewiring. 

Energi Savr NodeTM QS, 

seeTouch® QS keypad, 


How does Hyperion work with Quantum 

Quantum is a lighting control system that has 

the ability to manage total light levels in response 

to available daylight. By combining Hyperion’s 

effective daylight management with Quantum’s 

daylight harvesting capabilities, electric light usage 

can be lowered to conserve electricity every day. 

Example: 

A 50,000 sq. ft. commercial building 

spends about $45,000 each year on 

lighting energy. 

Much of that money is wasted due to ineffective 

light control. Through the optimization of electric 

light and daylight, Quantum and Hyperion can cut 

lighting costs by 60% or more while greatly 

improving the visual environment. 

Entire building 

or campus solutions 

Quantum® manages both daylight and electric light 

by integrating light and shade control devices. With 

Quantum, facility managers can maximize energy 

efficiency, comfort, and productivity, as well as 

configure, monitor, analyze, and report on the light in 

an entire building—all from a central location. 

Quantum hub, 

Quantum GreenGlance, 

Hyperion system, 


* For more information on Lutron lighting control and total light control products, visit www.lutron.com. 


HyperionTM | system components 

Quantum® components 

Sivoia® QS 

daylight controls 

Lutron® fabrics 

seeTouch ® QS 

wall keypads 

Key components 

Hyperion solar-adaptive shading is powered by the 

Quantum Total Light Management system. 

Electronic Drive Unit (EDU) 

Through Hyperion, Quantum uses Sivoia® QS 

shades to create a dynamic shading system for 

the entire building. 

The Hyperion shading system is set up, tuned and 

controlled using Q-AdminTM software. 

Quantum’s BACnet® capabilities also allow a 

building automation system to control and monitor 

the shades. 

Works with Lutron dimming ballasts to maximize 

usable daylight and minimize electric lighting load. 

Q-Admin software 

• Used on PC to control and monitor Quantum 

Sivoia QS roller shades 

• Reduce glare and solar heat gain 

for increased productivity, comfort, 

and energy savings while preserving 

views 

• Electronic Drive Unit (EDU)quietly 

controls shades with ultra-precise 

alignment 

Quantum hub 

• Connects all Quantum system 

components and powers Hyperion 

For reliable daylight control that enhances a 

room’s décor, Lutron provides a superior 

selection of roller shade fabrics. 

Categories: 

• Sheer: daylight is filtered while preserving view 

• Dim-out: permits some light, but view is limited 

to shapes and shadows 

• Blackout: prevents all light from passing 

through the material. Combine with side 

channels, top treatments, and other 

components for a complete light seal, 

when necessary. 

Fabrics are available for any application and 

every price range. 

See pages 80-87 for details. 

Wall keypads 

• Select a preferred light level 

for every task, and adjust 

shades quietly at the touch 

of a button 

• Use of local keypads can 

provide occupants with the 

ability to override the Hyperion 

schedule and further reduce 

glare as needed 

QS Smart Panel Power Supply 

• Provides low voltage power to shades and accessories 

(Optional) Cloudy Day Sensor 

• Enables an override to Hyperion 

shade movement when a cloudy 

day condition is present. 


HyperionTM | example 

Lutron® shading solutions | tensioned shades 

June 21st | 11:00 a.m. 

HyperionTM automatically positions 

shades to let useful daylight into the 

space. Lights near windows dim to 

save energy. 

December 21st | 11:00 a.m. 

Shades remain partially closed to 

block harsh low-angled winter sun. 

Lights near windows remain bright 

to maintain preferred light levels. 


Lutron® | tensioned shade system selection process 

Determine how 

tensioned shade 


Take 

system 

measurements (page 44) 

Specify 

drive location 

for pre-wiring 

Specify fabric 

roll detail 

Specify fabric 

Specify lineal 

requirements 

Mounting options (page 41) 

p Inside mount 

p Recessed mount 

p Surface mount 

Angle of installation (page 40) 

= _________________ degrees 

Tensioned shade system size 

System width = ____________ 

System length = _____________ 

(System includes frame 

and shade.) 

Typical maximum system size 

is 70 sq. ft (6.5 sq. m).* 

_________________ 

Meet in the middle skylight 

(custom) 

System width = ____________ 

System height = _____________ 

Typical maximum system size 

is 140 sq. ft (13 sq. m).* 

p Left drive 

p Right drive 

p TBD 

Specify wiring topology 

p Individual transformers 

(recommended for installations 

requiring local wiring) 

p Power panel 

(recommended for installations 

requiring centralized wiring) 

Fabric drop 

p Regular 

glass 

Roller location 

p Top (shade closes 

from top to bottom) 

p Bottom (shade closes 

from bottom to top) 

p Sheer 

These fabrics feature open 

weaves, so sunlight is 

filtered while preserving 

the view 

p Dim-out 

These fabrics permit 

some light, but are not 

open weaves, so the view 

is limited to shapes and 

shadows 

p Blackout 

These fabrics prevent all 

light from passing through 

the material 

Frame and fascia 

metal color: 

p Clear anodized 

p White 

p Custom: 

_________________ 

Assembly: 

p Pre-assembled** 

(ships as a complete 

product) 

p Customer 

assembled (ships 

as components) 

Note: To ensure system 

stability, only fiberglassbased 

fabrics are available. 

Refer to the SCT or contact 

Customer Service for details. 

See page 98 for 

control options. 

For details, refer to 

P/N 367-1530. 

* Maximum system size may vary based on fabric selection. Contact Shade Quotes or 

use the SCT for actual system size dimensions based on fabric type. 

** Available for shade sizes up to 30 sq. ft (2.8 sq. m) 


tensioned shade | system overview 

tensioned shade | mounting options 

Angles of installation 

Lutron tensioned shades allow 

for flexible installation at any angle 

between -135º and 135º with 

consistent aesthetic results. Shade 

can close from top to bottom, or 

from the bottom up, with fabric 

unrolling closest to the window. 

Angled shades 

135° 

Angled shades 

90° 

Angled shades/ 

Skylight shades 

45° 

Skylight 

shades 

0° 

Mounting options 

Lutron tensioned shades can be installed inside of, recessed into, or on 

the surface* of the skylight or window opening. 

Skylight cross-section 

Inside mount 

(standard) 

Recessed inside mount 

(new construction) 

Surface mount (ceiling)* 

(ideal for retrofit) 

-135° 

Bottom-up shades 

-90° 


-45° 

Skylight shades/ 


ceiling 

Skylight and window room view 

Inside mount Recessed inside mount Surface mount (ceiling)* Meet in middle 

System parameters 

This chart illustrates dimensions of the 

tensioned shade system. System contains 

frame and shade. 

2 ft. (610 mm) 

3 ft. 

(914 mm) 

Drive side (top) 

Minimum system size: 

2 ft. wide x 3 ft. long (610 mm x 914 mm) 

Maximum width: 8 ft. (2438 mm) 

Maximum height: 12 ft. (7315 mm) 

Maximum sq. ft.: approx. 70 sq. ft. (6.5 sq. m) 

(140 sq. ft. (13 sq. m) for meet-in-the-middle shades) 

Frame thickness: 

Drive side: 4.65 in. (118 mm) 

Non-drive sides: 2.25 in. (57 mm) 

Note: Tensioned shade dimension limitations 

are a function of fabric selection and 

application angle. Please consult the SCT 

or Shading Quotes for details. 

8 ft. (2438 mm) 

12 ft. 

(3658 mm) 

Frame specifications 

System is concealed within its 

frame. Frame thickness and depth 

remain the same regardless of 

system size. Pre-assembled 

shipping available*.* Available in white 

and anodized aluminum. 

4.75 in. 

(121 mm) 

4.75 in 

(XX mm) 

Drive side Side 

4.65 

4.65 inin. 

(118 (XX mm) mm) 

2.25 in in. 

(57 (XX mm) 

2.25 in. 

(57 

(XX mm) 

* Surface mount recommended for skylight applications only 

** For shade sizes up to 30 sq. ft. (2.8 sq. m) 


tensioned shade | mounting options 

Mounting options 

Cross-section 


Inside mount 

glass 

Inside mount 

glass 

2.25 in. 

(57 mm) 

4.75 in. 

(121 mm) 

4.6 in. 

(118 mm) 

4.75 in. (121 mm) 

Recessed mount 

glass 

Recessed mount 

4.6 in. 

(118 mm) 

2.25 in. 

(57 mm) 

4.6 in. 

(118 mm) 

glass 

2.25 in. 

(57 mm) 

4.6 in. 

(118 mm) 

Surface mount (ceiling)* 

glass 

4.75 in. (121 mm) 

4.6 in. 

(118 mm) 

2.25 in. 

(57 mm) 

* Surface mount is only applicable with skylight applications. 


tensioned shade | measuring instructions 


Measuring for inside mount tensioned shades 

Recessed mount measuring instructions 

1 

Measure the opening width at each end and the center ( 1 2 3 ), where the 

frame will be mounted. 

Section view of shade width 

Section view of shade length 

NOTE: For sloped ceilings, mount the roller at the top of the opening. 

2 

Measure the opening length at each end and the center ( 4 5 6 ), where the 

frame will be mounted. 

3 

4 

Measure each diagonal ( 7 8 ) dimension of the opening. 

Order the shade using the following formula to make sure the frame fits 

in the opening. 

Frame Width = (Minimum measured width) - (Maximum diagonal-Minimum diagonal) 

2 

Frame Length = (Minimum measured length) - (Maximum diagonal-Minimum diagonal) 

2 

Example: Skylight well measuring 

A 

A 

B 

C 

Dimensions 

2.24 in. (57 mm) 

Opening width 

Frame width 

(= + 4.5 in. [114 mm]) 

D 

F 

G 

Dimensions 

4.65 in. (118 mm) 

2.24 in. (57 mm) 

Opening length 

Frame length 

(= + 6.9 in. [175 mm]) 

E 

D 

1 

28 in. (711 mm) 

Width of skylight well 

For this opening, order a tensioned shade 

with the following dimensions: 

Surface mount measuring instructions 

5 

38.2 in. (971 mm) 

Frame Width = 

28 in. - (47.75 in. - 47.25 in.) = 27.75 in. 

2 

Section view of shade width 


4 

38.5 in. (978 mm) 

Length of 

skylight well 

2 

28 in. (714 mm) 

6 

38.2 in. 

(971 mm) 

Frame Length = 

38.2 in. - (47.75 in. - 47.25 in.) = 37.95 in. 

2 

8 

47.25 in 

(1200 mm) 

7 

3 

28 in. (714 mm) 

47.75 in. 

(1213 mm) 

A 

A 

B 

C 

Dimensions 

2.24 in. (57 mm) 

Opening width 

Frame width 

(= + 4.5 in. [114 mm]) 

D 

F 

G 

Dimensions 

4.65 in. (118 mm) 

2.24 in. (57 mm) 


Frame length 

(= + 6.9 in. [175 mm]) 

E 



Lutron® shading solutions | drapery track 

Inside mount measuring instructions 

Dimensions 

4.65 in. (118 mm) 

2.24 in. (57 mm) 


Frame length 

( = for inside mount) 

glass 


Pocket/recessed mount 

measuring instructions 


Dimensions 

4.65 in. (118 mm) 

2.24 in. (57 mm) 


Frame length 

(= + 6.9 in. [175 mm]) 

glass 

46 | Lutron 

Lutron | 47

Lutron® | drapery track system selection process 

Determine how 

drapery track 


Take 

system 

measurements 

Determine 

capacity 

Specify 

track requirements 

Specify 

optional features 

Specify 

fabric 

Mounting conditions 

p Wall mount 

p Ceiling mount 

p Recessed mount 

Track shape (page 55) 

p Straight 

p Curve 

p Bend 

Track type (page 54) 

p Single 

p Dual 

p Tandem 

p Dual/Tandem 

Track length* † (inches) 

= __________________ 

* Estimated opening 

size is approximately 2/3 of 

length left or right stack of track split-draw center stack 

system width 

system width 

† 

Estimated stack back is 

each stack 

= approx 1/6 

(system width) 

stack= 1/3 

approximately (system width) 1/3 of length 

of track 

left or right stack 

system width 

Left or right stack** 

stack = 

approx. stack= approx 1/3 1/3 


width 

Drapery weight (lbs.) 

= __________________ 

System measurements 

will determine required 

drapery capacity 

System capacity (page 62)* 

p D105 (105 lbs.) 

p D145 (145 lbs.) 

p D175 (175 lbs.) 

system width 


split-draw center stack 

* Capacities each stack required depend 

= approx 1/6 

upon drape weight, track shape 


(bend radius), and track length 

Pleat style 

p Pinch pleat 

p Ripplefold 

Fullness 

(Ripplefold only) 

p 80% 

p 100% 

p 120% 

Track metal color 

(bracket color to match) 

p Bronze 

p Clear anodized 

p White 

p Custom 

Track splicing (page 56) 

p One splice 

(ships in 2 sections) 

- required for track over 

18 ft. (5486 mm) 

p Two splices 

(ships in 3 sections) 

p Manual open carrier* 

(page 57) 

Available in pinch pleat 

or ripplefold 

* Manual open carrier 

operates on drapery panels 

weighing up to 70 lbs. 


control options. 

p Avant CollectionTM 

(Soft fabrics only - woven 

woods not applicable. 


more information.) 

p COM (Customer's 

Own Material) 

(see page 95 for 

more information) 

Draw type 

__________________ 

p Center draw 

p Right draw 

left or right stack 

system width 

split-draw center stack 

system width 

Split-draw center stack 

p Left draw 

Drive side 

stack= approx 1/3 


each stack 

= approx 1/6 


p Right 

p Left 

each stack = approx. 

1/6 system width 

** Refer to Shade Configuration 

Tool (SCT) for exact opening 

size and stack back 


drapery track | system overview 

System overview 

• 

Provide privacy with elegant draperies of any 

fabric and color (including customer-supplied) 

• 

One-touch control of individual or groups of 

draperies for fully-open, fully-closed, or 

movement to preset positions 

• 

Integrates seamlessly with other Lutron systems 

• 

Patented technology eliminates noise 

in tracks 

• 

Left-draw, right-draw, split-draw and 

curved systems available 

Brackets 

Drapery track systems can be mounted to the 

wall or to the ceiling. The track is predrilled 

with mounting holes for recessed mount 

applications. Holes are spaced at 16 in. 

(406 mm) intervals from the track center. 

Ceiling mount bracket 

Ceiling mount bracket - recessed with wood screw 

1.5 in. wood screw 

Structural member 

Recessed mounting bracket 

Recessed pocket 

Drapery track 

Pocket 

2 in. (51 mm) 

1.1 in. 

(28 mm) 

1.1625 in. 

(29.5 mm) 

1.0625 in.* (27 mm) 

pocket depth 

1.25 in. 

(32 mm) 

2 in. (51 mm) 

minimum pocket width 

3.3 in. 

(84 mm) 

2.06 in. 

(52 mm) 

Ceiling mount bracket exploded view 

Ceiling mount bracket - recessed with drywall anchor 

3 in. drywall anchor screw 

8.88 in. 

(226 mm) 

10.63 in. 

(270 mm) 

Drywall 

Drywall anchor 

0.5 in. (13 mm) hole 

Recessed mounting bracket 

Recessed 16 in (406 mm) pocket 

16 in (406 mm) 

18 ¾ 8 in (467 mm) 

Drapery track 

7 ¼ in (184 mm) 

7 ¾ 8 in (187 mm) 

1.0625 in.* (27 mm) 

pocket depth 

2 in. (51 mm) 

minimum pocket width 

* 1.0625 in. (27 mm) depth provides complete concealment of the track using 

recessed brackets while maintaining proper clearance for the drapery. 


drapery track | system overview 

drapery track | mounting options 

Wall mount bracket (side view) 

4.25 to 6.75 in. 

(108 to 172 mm) 

Straight track mounting options 

Specify left draw, right draw, or center 

draw drapery track options. 

Track configuration 

Track width (application dependent 

18 ft. [5486 mm] maximum)* 

Left draw/left-mounted EDU 

1.2 in. 

(31 mm) 

1.625 in. 

(41 mm) 

10.6 in. 

(270 mm) 

8.89 in. 

(226 mm) 

wall 

1.25 in. 

(32 mm) 

Dual wall mount bracket (minimum extension) 9.6 in. (248 mm) 

3.3 in. (84 mm) 

4.6 in. 

(117.5 mm) 

4.6 in. 

(117.5 mm) 

3.5 in. (89 mm) 

3.5 in. (89 mm) 

9.6 in. (248 mm) 

9 in. (229 mm) 

1.2 in. 

(31 mm) 

1.2 in. 

(31 mm) 

1.7 in. 

(43 mm) 

1.7 in. 

(43 mm) 

Right draw/right-mounted EDU 



wall 

9 in. (229 mm) 

Split-draw, left- or right-mounted EDU 



Dual wall mount bracket (maximum extension) 

12.1 in. (311.2 mm) 

12.1 in. (311.2 mm) 

4.6 in. 

(117.5 mm) 

4.6 in. 

(117.5 mm) 

6 in. (152.4 mm) 

6 in. (152.4 mm) 

1.2 in. 

(31 mm) 

1.2 in. 

(31 mm) 

1.7 in. 

(43 mm) 

1.7 in. 

(43 mm) 

Tandem draw, left- and right-mounted EDUs 

Track width (application dependent) 

36 ft. [10.97 m] maximum, 60 ft. [18.3 m] with splice) 

wall 

11.5 in. (292.1 mm) 

11.5 in. (292.1 mm) 

Note: Valance and drapery not included 

* 30 ft. (762 mm) maximum with splice. Varies by pleat style. 


drapery track | system installation 

drapery track | curved 

Single drapery track system 

Maintain enough clearance between the drapery track and the inside face of 

the top treatment or ceiling recess to allow the fabric to move freely. 

(wall mount shown) 

Dual drapery track system 

Lutron® drapery tracks can be used for a combination 

sheer/blackout treatment. 

Dimensions* 

11.25 in. (286 mm) 

3.5 in. (89 mm) 

2.5 in. (64 mm) 

1 in. (25 mm) 

Dimensions* 

11.25 in. (286 mm) 

3.5 in. (89 mm) 

2.5 in. (64 mm) 

1 in. (25 mm) 

5.5 in. (140 mm) 

Lutron® curved drapery tracks 

In addition to straight tracks, Lutron offers its 

ultra-quiet drapery system for curved 

applications. The system provides the same 

smooth movement, all preset capabilities, 

and robust performance. 

• 

Curved tracks are available in a standard arc or by 

custom specifications 

- Standard arc: 90° bend with 20 in. (0.5 m) radius 

- Custom: up to 90° bends are possible; curved 

radius must be greater than 20 in. (0.5 m) 

• 

Center draw and single draw versions are available. 

See charts on pages 62-64 for weight capacities 

of single-bend, drapery track systems. Please 

contact Shading Quotes with specific requests. 

Curve 

D105, D145, or D175* 

Order process: 

1. Contact your Lutron Customer Service 

representative to initiate a job request, and 

receive a quote along with a custom job number. 

2. Your representative will provide you with detailed 

instructions for laying out an exact template of 

the track. 

www.lutron.com/RequestFormPDF/custom_ 

curved_drapery_requestform.pdf 

3. Upon order, ship the project template to 

our factory along with your custom job number. 

4. Your track order will be processed, and your 

custom-curved track will ship after production. 

Note: Standard 90°, single-bend curved tracks 

are available in the SCT. 


Single, tandem drapery track system 

The accuracy of movement and speed control of the drapery track 

system allows two independent systems to be used to create a 

center draw drape. 

Dimensions* 

11.25 in. (286 mm) 

3.5 in. (89 mm) 

2.5 in. (64 mm) 

1 in. (25 mm) 

Bend 

D105, D145, or D175* 

Double bend system can be created 

with tandem single-bend systems. 

Double curve** 

D145 or D175* 


Corner application 

Drapery tracks can be used in corner applications. 

Double curve tracks will typically incorporate a splice 

along a middle straight section for ease of shipping. 

Double bend** 

D145 or D175* 

Double bend tracks will typically incorporate a 

splice along the middle straight section for ease 

of shipping. 

splice 

splice 

* Measurements listed are minimums. 

Note: Drapery tracks utilize an external EDU 

* D175 is QS and QS Wireless only. 

** Requires 16 in. (406 mm) straight section 


drapery track | track splicing 

drapery track | manual open feature 

Track splicing is available on finished systems and is 

a convenient solution for the shipment and installation 

of long drapery tracks. 

Spliced drapery tracks are shipped from the factory in 

multiple sections (two equal sections with one track 

splice, or three equal sections with two track splices) 

and are easily reconnected at the installation site 

using a splice bar. 

Benefits: 

• Track maintains quiet operation 

• Splice bar allows track to be easily reconnected 

and ensures a virtually invisible seam 

• Allows for: 

- Longer standard track lengths - up to 30 ft. 

(9,144 mm), up to 60 ft. (18,288 mm) for 

spliced, tandem systems 

- Shorter packaging and easier transportation of 

the tracks into and within the installation site 

The drapery track system is available with a manual 

open carrier*. When manual force is applied to the 

drapery, the master carrier releases, allowing the 

drapery to open. 

The patented Lutron® spring release system is 

field-adjustable to customize the amount of force 

necessary to manually open the drapery. 

Benefits: 

• Open draperies during a power loss for access to 

daylight and the outside 

• Prevent damage to the system if a user attempts 

to pull open the drapery, not realizing that the track 

is motorized 

• Available for pinch pleat or ripplefold 

1. Track arrives in equal sections with a splice bar and Allen wrench. 

Pinch pleat carrier shown: 

Engaged: Master carrier hanger bar is connected to master carrier latch plate. 

Master carrier 

latch plate 


hanger bar 

Drapery track 

2. Sections slide together and are secured with splice bar. 

Disengaged: When the drapery is manually opened, master carrier hanger bar 

releases from master carrier latch plate. 


latch plate 


hanger bar 

3. Tightening splice bar screws aligns and joins the two track pieces. Track is spliced 

together and ready for installation. 

To re-engage: Manually re-engage the drapery by pulling it back to the closed 

position, or press the “Open” button on the drapery control for 

automatic re-engagement. 

* Manual open carrier operates on drape fabric panels weighing up to 70 lbs (31.7 kg). 


drapery track | pinch pleat drapery panels 

drapery track | ripplefold drapery panels 

Pinch pleat drapery hook assembly 

Pinch pleat style is named for the pleated look created by pinched 

gatherings of the fabric at the top of the drapery. Pins on the back of the 

drapery are simply looped through the carriers on the track when installed. 

For the best system performance, a drapery hook setting of 0.5 in. (13 mm) 

from the top of the drapery should be used. This allows the system to 

operate with minimal noise. 

Top of drapery panel 

Ripplefold drapery tape assembly 

Ripplefold pleat style is named for the soft, consistent ripples created by the 

drapery as it hangs from the track. It offers an elegant, contemporary look — 

ideal for both residential and commercial settings. 

• Drapery is constructed with snap tape (Graber® is required) that allows the 

drapery to be snapped directly to auxiliary carriers on the track 

• Fullness of the drapery is determined by the spacing of the carriers in the 

track. The higher the fullness factor, the more full the draperies appear. 

Lutron® ripplefold tracks are available in 3 fullness factors: 80%, 100%, 120% 

80% 100% 120% 

0.50 in. 

(13 mm) 

Drapery fabric return 

(pinch pleat drapery shown) 

drapery panel 

4.5 in. (114 mm) 

minimum for wall 

mount bracket 

9.5 in. (241 mm) 

minimum for dual 

mount bracket 

Top of tape = drapery panel top 

wall 


drapery track | finished drapery panels 

drapery | cornices 

Lutron® now offers finished drapery panels for use on 

our electronically controlled drapery track. 

Specifying a drapery solution just got easier now 

that all components are available from Lutron – your 

single source. 

Drapery panels may be made with fabrics from the 

Avant CollectionTM or with customer’s own material. 

Cornices may be used on Kirbé® vertical drapery 

systems, traditional drapery systems, as well as Lutron 

roller shades. They afford flexibility as they permit 

outside mounts for shading systems with no need for 

construction of pockets. 

Clean lines of a straight cornice lend themselves to a 

contemporary or transitional space. Select a shaped 

cornice for traditional décor. 

Customer’s Own Material (COM) 

COM may be used to create Roman shades, drapery 

panels, and cornices. Contact Customer Service for 

more information on submitting COM for testing and 

approval. 

Process for evaluating COM fabrics for 

Lutron Shading Products 

1. Build a quote in the SCT for the product you 

require, selecting any standard fabric as 

a placeholder. 

2. In the SCT notes field, please include: 

a. Fabric name 

b. Color 

c. Pattern vertical repeat (inches) 

d. Roll width (inches) 

e. The related line item number 

f. Fabric weight (oz/sq. yd.) + thickness 

3. Submit your quote using the Lutron eQuote feature. 

Straight cornice 

Shape A 

Shape B 

Shape C 

12 in. (305 mm) 

typical 

Lutron will respond to your quote request and will 

provide you with an estimate of the price to complete 

your shades, the dimensions of the fabric that will be 

required for evaluation, and shipping details. Please 

note that the price provided is only an estimate, and 

is contingent upon our engineering evaluation of your 

fabric once submitted. 

Shape D 

Cornices are composed of a .75 in. (19mm) thick fabric 

wrapped board with foam padding. Only soft fabrics 

from the Avant CollectionTM are compatible with cornices. 


drapery track | D105 system capacities 

drapery track | D145 system capacities 

Lutron® | D105 pinch pleat system capacity 

System width 

Straight track 

Curved track, 

1 bend 

24 in. to 32 in. (610 mm to 813 mm) 20 lbs (9.1 kg) N/A (track too short) 

32 in. to 44 in. (813 mm to 1118 mm) 30 lbs (13.6 kg) 30 lbs (13.6 kg) 












Notes for all drive systems: 

• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other draperies 

can have a fullness ratio up to 2.5:1 

• Curved radius to be 20 in. (0.5 m) or greater 


System width 


Curved track, 

1 bend 

Curved track, 

2 bends 

24 in. to 32 in. (610 mm to 813 mm) 20 lbs (9.1 kg) N/A N/A 

32 in. to 44 in. (813 mm to 1118 mm) 30 lbs (13.6 kg) 30 lbs (13.6 kg) N/A 


56 in. to 68 in. (1422 mm to 1727 mm) 55 lbs (24.9 kg) 55 lbs (24.9 kg) 40 lbs. (18.1 kg) 

68 in. to 84 in. (1727 mm to 2134 mm) 65 lbs (29.5. kg) 65 lbs (29.5 kg) 45 lbs. (20.4 kg) 

84 in. to 108 in. (2134 mm to 2743 mm) 80 lbs (36.3 kg) 80 lbs (36.3 kg) 50 lbs (22.7 kg) 



180 in. to 216 in. (4572 mm to 5486 mm) 135 lbs (61.2 kg) 95 lbs (43 kg) 55 lbs (24.9 kg) 





Notes for all drive systems: 

• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other draperies can have 

a fullness ratio up to 2.5:1 


Lutron | D105 ripplefold system capacity 

System width 


24 in. to 32 in. (610 mm to 813 mm) 30 lbs (13.6 kg) 







10 lbs (4.5 kg) for 80% fullness 

180 in. to 216 in. (4572 mm to 5486 mm) 10 lbs (4.5 kg) for 100% fullness 

n/a (capacity limit) for 120% fullness 


System width 












For curved ripplefold systems, please contact the shading solutions service team at 1.888.LUTRON1 

For curved ripplefold systems, please contact the shading solutions service team at 1.888.LUTRON1 


drapery track | D175 (QS and QS Wireless only) system capacities 

Lutron® shading solutions | Kirbé® vertical drapery system 


System width 


Curved track, 

1 bend 

Curved track, 

2 bends 

24 in. to 32 in. (610 mm to 813 mm) 20 lbs (9.1 kg) N/A N/A 





84 in. to 108 in. (2134 mm to 2743 mm) 80 lbs (36.3 kg) 80 lbs (36.3 kg) 70 lbs (31.8 kg 








Notes: 

• A pinch pleat fullness ratio of 3:1 is allowable for sheer draperies only. All other 

draperies can have a fullness ratio up to 2.5:1 



System width 









132 in. to 168 in. (3353 to 4267 mm) 165 lbs (74.8 kg) 





50 lbs (22.7 kg) for 80% 

324 in. to 360 in. (8230 mm to 9144 mm) 50 lbs (22.7 kg) for 100% 

N/A (capacity limit) for 120% 

64 | Lutron 

For curved ripplefold systems, please contact the shading 

solutions service team at 1.888.LUTRON1 

Lutron | 65

Kirbé® vertical drapery system | overview 

Kirbé® vertical drapery system example installation 

A 

Dimensions 

B 

8 in. (203 mm) minimum cornice depth 

5.58 in. (142 mm) 

12 in. (305 mm) recommended 

cornice height 

F 

0.75 in. (19 mm) 

0.27 in. (7 mm) 

C 

7.56 in. (192 mm) wood blocking 

Max rollup = Ø3 in. (Ø76 mm) 

Hembar (Ø4 in. roller 100) 

E 

G 

36 in. (914 mm) minimum height 

10 ft. (3048 mm) maximum height 

H 

1.5 in. (38 mm) minimum light gap 

24 in. (610 mm) minimum width 

12 ft. (3658 mm) maximum width 

Glass (typical) 

D 

Cornices must be ordered 2 in. 

(51 mm) larger than Kirbé width 

L 

K 

C 

An industry first – this entirely new type of window 

treatment smoothly moves the drapery up and out 

of the way at the touch of a button. The Kirbé 

vertical drapery system captivates with its unique 

and unexpected motion. 

Optional roller 64TM or roller 100TM integrate 

seamlessly with the standard Kirbé brackets to 

allow for complete privacy and additional light 

blocking capability. 

I 

J 

Kirbé is currently offered with sheer and privacy 

fabrics from the Avant CollectionTM that range from 

traditional neutrals to bold shimmering patterns. 

Custom printing is also available. 

Finish off the look of your Kirbé with a Lutron® 

cornice (see page 61). 

Kirbé is also available with manual clutch 

uptake system. 


Kirbé® vertical drapery system | system components 

Lutron® shading solutions | Roman shades 

Kirbé eliminates “stackback” – the mass of 

fabric left when a traditional drapery is opened. 

The Kirbé vertical drapery system features a 

number of innovations that make rolling 

pleated fabric in a window treatment possible. 

Header mechanism 

Reliably and delicately smooths and pleats 

fabric as it is taken into and let out of the 

mechanism. 

Perma-pleat bottom barTM 

Weights fabric and maintains a smooth and 

even pleat to keep drape uniform. 


With optional 

roller shade 


Perma-pleat bottom bar 

Header mechanism with Kirbé fabric 

68 | Lutron 

Lutron | 69

Roman shades | overview 

Lutron® Roman shades with CERUS® safety technology 

A revolutionary design in Roman shades; the Cord Eliminating Roman Uptake System (CERUS) eliminates 

lifting cords associated with normal Roman shade construction and creates an industry first for safer shades 

with silent and smoother operation. The drives used in Lutron Roman shades have specific hardware to 

ensure smooth motion on a Roman shade, which has different loading than a roller shade. Roller 64TM and 

roller 100TM drives are available, depending on the size of the Roman shade. 

Lutron Roman shades are offered in four styles: 

Woven woods only available for Flat style 

Flat Hobbled Knife Casual 

CERUS Fabrication kit 

The CERUS fabrication kit is comprised of components that a local workroom can affix to a Roman 

shade fabric panel. The primary components of the kit are the CERUS bands. Note: The CERUS Roman 

shade fabrication kit is only offered to qualified Lutron shade providers. This solution is a standard line 

item in the Shade Configuration Tool, versions 7.0 and higher. 

Roman shade dimensions 

In order to expand Roman shades sizes, a 2-on-1 and 3-on-1 headrail system has been developed. This 

allows for multiple fabric/woven woods panels to be attached to one headrail with the ability to custom 

place each panel. This allows consideration of window mullions, hardware, etc. There is a minimum light 

gap requirement of at least 0.5 in. between woven woods panels; there is no requirement for soft fabrics. 

1-on-1 system 

Fabric panel in a 2-on-1 

or 3-on-1 system 

2-on-1 system 

3-on-1 system 

Maximum Dimensions* 

Soft Fabrics 

102 in. w x 120 in. h 

(2591 mm x 3048 mm) 

144 in. w x 120 in. h 

(3658 mm x 3048 mm) 

* Minimum dimensions for all panels and systems = 25 in. w x 24 in. h (mm x mm) 

Headrail and Drive Configurations 

Woven Woods 

Roll width x 120 in. h 

(Roll width x 3048 mm) 

144 in. w x 120 in. h 

(3658 mm x 3048 mm) 

About CERUS safety technology 

Eliminating cords from the traditional construction of Roman shades has four 

major advantages: 

Improved reliability 

With the elimination of cords, the Roman shade will never become tangled, 

ensuring the shade will work perfectly every time. 

Superior performance 

CERUS also allows for a smoother, more even travel of the shade, since a cord 

is not stacking and slipping as it rolls. Additionally, Lutron electronic drive units for 

Roman shades have upgraded software for enhanced precision movement. 

Quiet operation 

Lifting cords slip and stack as the shade rolls, creating a noticeable noise that 

can be amplified if the cords become entangled. By replacing these cords with 

CERUS bands, these issues are eliminated, allowing your near-silent electronic 

drive unit (38 dBA at 3 ft.) to maintain quiet operation as to not disrupt a space. 

CERUS uptake band 

Headrail depth 2.5 in. (64 mm) 3 in. (76 mm) 4.5 in. (114 mm) 5 in. (127 mm) 

Front control 

roller 64 • • • 

roller 100 

• 

roller 150 

• 

Manual clutch V8 • • • 

Manual clutch V16 • • 

Manual clutch V24 

• 

Back control 

roller 64 • • • • 

roller 100 • • 

roller 150 • • 

Manual clutch V8 • • • • 

Manual clutch V16 • • • • 

Manual clutch V24 • • 

Advanced safety 

CERUS safety technology allows for a safer Roman shade system by utilizing 

uptake bands in place of exposed inner cords. Inner cords may pose a 

strangulation hazard to small children. 

For more information, visit www.windowcoverings.org 

Fabric selection 

Roman shades can be made using soft fabrics or woven woods from the Avant CollectionTM, 

or with a customer’s own material (see page 95 for details on COM approval process). 


Roman shades | fabric quick reference guide 

Fabric Name 

Fabric 

Composition 

Weave 

Usable Roll 

Width 

Fabric Information 

oz/yd² 

Weight 

Price Group 

Railroading 

Roman Shade 

Pleat Styles 

Avant Collection Shading Solutions 

Drapery Accessories Fabric Care 

Sheer 

Dalton* 100% Polyester Plain w/ injected yarns 118 in (2997 mm) 3.41 G l* l l l Medium l 

New Batiste* 100% Polyester Plain 118 in (2997 mm) 2.19 A l* l l l Medium l 

Touch* 100% Polyester Plain w/ injected yarns 106 in (2692 mm) 1.36 F l* l l Medium l l 

Non-Sheer 

Acaulis 99% Polyester, 1% Lurex Jacquard 54 in (1372 mm) 6.42 20 l l l l Medium l 

Aveeno 100% Polyester Jacquard 56 in (1422 mm) 6.17 9 l l l l l l Medium l 

Bangkok 100% Polyester Plain w/ injected yarns 54 in (1372 mm) 5.23 14 l l l l l l l Medium l 

Bangle 55% Polyester, 45% Nylon Embroidered 57 in (1448 mm) 4.05 15 l l l l l l High l 

Cana 

65% Polyester, 

35% Cotton 

Pile-Velvet 54 in (1372 mm) 10.07 16 l l l l l l Medium l l 

Chateau 100% Polyester Embroidered 57 in (1448 mm) 4.51 13 l l l l l l High l 

Chic 100% Polyester Plain-Ribbed 54 in (1372 mm) 8.00 8 l l l l l Medium l 

Demeter 

50% Polyester, 

50% Acrylic 

Jacquard 58 in (1473 mm) 4.70 10 l l l l Medium l 

Eris 100% Silk Plain 54 in (1372 mm) 2.79 25 l l l l l l High l 

Fausta 

55% Linen, 

45% Rayon 

Plain with printing 54 in (1372 mm) 10.66 16 l l l l l l l High l 

Hermes 100% Silk Plain 54 in (1372 mm) 2.79 25 l l l l l l High l 

Honduras 

100% Polyester with 

100% Rayon Embroidery 

Plain with embroidery 55 in (1397 mm) 4.42 19 l l l l l l l Medium l 

Jameson 100% Polyester Jacquard-plain 54 in (1372 mm) 9.60 15 l l l l l l l Low l l 

Nevis 100% Polyester Jacquard 54 in (1372 mm) 4.33 13 l l l l Medium l 

Paddock 

Shawl 

100% Cotton Sateen 54 in (1372 mm) 7.60 14 l l l l l l High l l 

Ragen 100% Polyester Jacquard 60 in (1524 mm) 3.81 12 l l l l l l Medium l 

Suspicion 100% Polyester Faux silk - plain weave 58 in (1473 mm) 5.69 11 l l l l l l High l 

Tendril 

NEW 

100% Polyester Jacquard 118 in (2997 mm) 9.01 G l* l l l l Low l l 

Torrey Pines 

60% Cotton, 

40% Polyester 

Jacquard-Satin 54 in (1372 mm) 13.50 16 l l l l l l Medium l l 

Fire Resistant 

Hobbled 

Knife 

Flat 

Casual 

Kirbé vertical 

drapery system 

Drapery 

Panels 

Cornices 

Wrinkle 

Susceptibility 

Steaming 

Permissible 

Steaming Not 

Recomended 

Wrinkle 

Remover Spray 

* These fabrics are railroaded by default, giving Dalton and Touch a vertically striped pattern. 

72 | Lutron 

Lutron | 73

Roman shades | woven wood quick reference guide 

Lutron® shading solutions | Venetian blinds 

Material Name 

Material Content 

Usable Roll 

Width 

Price Group 

Weight 

oz/yd² (g/m²) 

Edge Binding 

Horizontal 

Pattern* 

Material Color 

Change 

Thread Color 

Change 

Performance 

Considerations 

Angel River Reeds/Thread 96 in (2438 mm) 3 28.57 (968) l 

Aris Reeds/Yarn 96 in (2438 mm) 2 29.2 (1590) l Lighter Lighter 

Bacopa Bamboo/Reeds 96 in (2438 mm) 2 46.89 (1590) l Lighter 

Batang Reeds 96 in (2438 mm) 1 28.31 (960) l 

Batang - White Reeds (Painted) 96 in (2438 mm) 1 28.31 (960) l 

Beijing Grass 96 in (2438 mm) 4 13.33 (452) l Lighter Lighter 

Bengali Reeds/Yarn 72 in (1829 mm) 6 24.77 (840) l 

Cheras Reeds/Copper wire 96 in (2438 mm) 6 28.31 (960) l l Lighter Lighter 

Dynasty - Teak Bamboo 120 in (3048 mm) 1 39.61 (1343) l Lighter Lighter 

Dynasty - Walnut Bamboo 120 in (3048 mm) 1 27.93 (947) l Lighter Lighter 

Gentle Orchid Reeds/Grass 96 in (2438 mm) 6 12.97 (440) l Lighter 

Ha Tien Bamboo 96 in (2438 mm) 4 66.96 (2270) Lighter 

Hanoi Reeds/Twine 96 in (2438 mm) 4 23 (780) l l Darker 

Hunan Reeds/Bamboo 96 in (2438 mm) 3 44.436 (1507) l l Lighter 

Jambu Bamboo/Reeds/Thread 96 in (2438 mm) 2 27.43 (930) l l Lighter Lighter 

Jilin Reeds/Thread 96 in (2438 mm) 3 29.2 (990) l Darker 

Juba Reeds/Twine/Bamboo 96 in (2438 mm) 5 32.44 (1100) l l Lighter Lighter 

Kaede Reeds/Grass/Yarn 96 in (2438 mm) 3 28.31 (960) l l Lighter Lighter 

Madras - Jute Reeds/Twine 96 in (2438 mm) 2 31.1 (1054) l Darker Lighter 

Madras - Oak Reeds 96 in (2438 mm) 3 43.8 (1485) l Lighter Lighter 

Mohave Reeds/Twine 96 in (2438 mm) 6 27.43 (930) Req'd l Lighter Lighter 

Nepal Bamboo/Reeds/Yarn 96 in (2438 mm) 1 51.41 (1743) l l Darker Lighter 

Rucca Reeds/Bamboo/Twine 96 in (2438 mm) 4 35.25 (1195) l l Lighter Lighter 

Sapporo Wood 96 in (2438 mm) 1 26.354 (893) l 

Sapporo - White Wood (Painted) 96 in (2438 mm) 1 29.2 (990) l 

Sasarido - Ebony Grass 96 in (2438 mm) 6 16.51 (560) l Lighter Lighter 

Sasarido - Umber Grass 96 in (2438 mm) 6 19.17 (650) l Lighter Lighter 

Satria Reeds/Yarn 96 in (2438 mm) 4 18.29 (620) l Lighter Lighter 

Sibu Reeds/Fabric 82 in (2083 mm) 2 24.18 (820) l l Darker 

Steffe Grass 96 in (2438 mm) 6 13.27 (450) l Lighter Lighter 

Sumo Bamboo/Reeds 96 in (2438 mm) 2 28.31 (960) l Lighter Lighter 

Taipei Twisted grass/Reeds 96 in (2438 mm) 1 41.22 (1398) l l Lighter 

Taishan Twine/Bamboo 96 in (2438 mm) 5 26.54 (900) l l Darker Lighter 

Waja Thread/Reeds 96 in (2438 mm) 4 28.31 (1299) l l Lighter Lighter 

Zhen Twine/Reeds 96 in (2438 mm) 1 31.42 (1065) l l Darker Lighter 

* These woven woods have a distinct horizontal pattern. Due to variations in the material and weaving process, 

74 | Lutron the pattern cannot be expected to line up when Romans of the same material are mounted next to each other. 

Lutron | 75

Venetian blinds with independent tilt and lift | overview 

Lutron Innovation 

Independent control of tilt and lift 

• Adjust position of blinds without affecting 

the angle of slats 

Precision control for groups of blinds 

• Lutron technology maintains uniform tilt and lift 

positions across multiple blinds 

• Blinds maintain Intelligent Hembar AlignmentTM, 

which has become the hallmark of Lutron shades 

Recall presets 

• Blinds adjust to a pre-determined height and 

tilt angle when a preset is recalled 

• Multiple presets can be defined for the same 

blind or group of blinds 

Fine-tune light and privacy levels 

• Venetian blind controls offer tilt adjustment 

buttons for precise positioning 

• Range of tilt can be adjusted from full tilt in either 

direction down to a fixed tilt angle 

Style 

With more than 50 paints and stains, 14 aluminum choices and an array of decorative tapes and 

valance styles to select from, Lutron Venetian blinds can be customized to your room’s design. 

Venetian blinds are an attractive and effective 

way to ensure privacy, while still allowing daylight 

to filter into a space. 

Lutron exclusive independent tilt and lift maintains 

uniform tilt and lift positions between blinds and 

combines smooth, quiet motion with separate control 

of tilt and lift for the ultimate in style 

and convenience. 

Venetian color and finish options 

Lutron® offers a variety of colors and finishes. 

Custom color matching is available for the 

Elite Collection only. Contact Customer 

Service for details. 

Decorative tapes (optional) 

Cover operational cords, adding a 

colorful accent to Venetian blinds 

76 | Lutron Lutron | 77 

Note: Venetian blinds are available in Sivoia® QS or Sivoia QS WIreless systems only

Venetian blinds | dimensions 

Lutron® shading solutions | fabric selection 

Example dimensions 

Dimensions 

Wood blocking 

3.55 in. (90 mm) 

2.52 in. (64 mm) 

A 

C 

B 

3.75 in. (95 mm) 

Finished ceiling 

Wood slats shown 

2 in. (50 mm) 

D 

E 

Glazing (typical) 

24 in. (610 mm) 

minimum width of headrail 

12 in. (305 mm) 

minimum blind height 

1.63 in. (41 mm) 

optional tape 

F 

G 

H 

I 

D 

J 

F 

K 

78 | Lutron 

Lutron | 79

Lutron® shading solutions | fabric selection 

Lutron® shading solutions | fabric overview 

Product type Fabric collection* Fabric options Additional options 

Roller shades 


Drapery track 

Kirbé® vertical 

drapery system 

Roman shades 

with CERUS® 

safety technology 

Classico CollectionTM 

Gallery Collection 

Classico Collection** 

Sheer Bottom bar style N/A 

Dim-out Bottom bar style N/A 

Blackout 

Sheer 

Dim-out 

Bottom bar style 


(ABB style required) 


(ABB style required) 

Sill angle 

Side channel 

N/A 

N/A 

Sheer Frame color N/A 

Dim-out Frame color N/A 

Blackout Frame color N/A 

Avant CollectionTM 

Pinch pleat Liner options 

Soft fabrics 

COM (see page 95) Ripplefold Liner options 

Avant Collection 

Avant Collection 

COM (see page 95) 

Sheer and 

privacy fabrics 

Soft fabrics 

Woven woods 

Optional roller 64TM 

or roller 100TM 

blackout shade 

Hobbled style 

Knife style 

Flat style 

Casual style 

Flat style 

Cornice Avant Collection Soft fabrics Shape N/A 

Venetian blinds 

with Intelligent 

Hembar AlignmentTM 

Venetian binder 

Cornice styles 

Liner options 

Liner options 

Liner options 

Liner options 

Liner options 

Edge binding 

Wood slats Valance Decorative tape 

Aluminum N/A N/A 

* See fabric matrices on pages 72-74, 82-83, 88-89 and 92-93 for more information 

** Select fabrics available for tensioned shades - visit www.lutron.com for more information, or 

consult the tensioned shade sell sheet (P/N 367-1530), also available online. 

Choosing the right fabric is critical to a successful 

shading project. Fabric selection is determined by 

evaluating the orientation of each elevation and 

the designer’s objectives. 

Before specifying fabric, follow these steps: 

Consider the application 

• Commercial or residential 

• Multi-purpose or dedicated function rooms 

• Day, night, or all-hours use 

• What types of activities will occur in the space 

• Will an aesthetic match be important inside or 

outside the building 

Prioritize needs 

Based on the application, determine priorities: 

• Control glare inside (reduce reflections 

on computer monitors, TVs, etc.) 

• Maintain view through shades 

• Protect interiors from fading 

• Reduce solar heat gain 

• Achieve a particular aesthetic (inside or outside) 

• Reduce environmental impact by selecting a 

sustainable fabric 

• Create privacy 

• Create a darkened room 

If a space is multi-purpose or several priorities 

are equally important, consider a dual-mount 

application with two fabrics on the same window 

(typically a sheer coupled with a dim-out 

or blackout). 

Sustainability 

Often fabrics are manufatured with chemicals to 

make them durable. Lutron sustainable fabrics 

reduce or remove many of these chemicals in order 

to improve indoor air quality. Others are made 

from recycled content in order to protect the 

environment. Refer to the matrices on pages 

82, 88, and 92 to find which fabrics are either 

PVC-free, recycled, GREENGUARD®, Cradle to 

Cradle Certified CM , or Oeko-Tex® Standard 100 

certified material. 

Choose a collection: 

Lutron offers multiple fabric collections tailored 

to each product family. 

The Classico CollectionTM 

For larger roller shade applications, durable and 

long-lasting fabrics are a necessity. The Classico 

Collection by Lutron includes wide roll widths, 

fire-rated materials, and an array of 

sustainable options. 

The Gallery Collection 

The Gallery Collection by Lutron offers a variety of 

color, texture, and pattern to accent any residential 

décor. Add beauty to traditional roller shades with 

interesting patterns, intricate weaves, sophisticated 

suedes, or colorful linens. 

The Avant CollectionTM 

Featuring woven woods, sheers, and soft fabrics, 

the Avant Collection offers over 100 contemporary 

and traditional materials for Kirbé® vertical drapery 

systems, cornices, finished drapery systems, and 

Roman shades with CERUS® safety technology. 

Venetian Blinds 

With a variety of 2 in. slat options in hardwoods 

(genuine, stained, and painted) and aluminums, as 

well as the option for custom color matching, there 

is a style option to enhance any room. Choose from 

one of our four wooden valances for a finished look, 

and accent the blinds by adding decorative tapes. 

The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license 

through the GREENGUARD Environmental Institute. Cradle to Cradle CertifiedCM is a certification mark of MBDC. 


fabric | The Classico Collection by Lutron® 

Fabric Name 

Usable 

Roll Width 

Openness 

Factor(s) (%) 

Sheer – SheerShade® – Maintain view while reducing glare and solar heat gain 

Railroading 

Seaming 

PVC-free 

An updated version of this chart is available for download at www.lutron.com/fabrics 

Greenscreen Revive**** 116 in. (2946 mm) 1, 3, 5 l l l l l l 

SheerLiteTM 96 in. (2438 mm) 3, 5 l l l l l 

Value Select 2 96 in. (2438 mm) 8 l l l l l 

Basketweave 90 4 96 in. (2438 mm) 1, 3, 5, 10 l l l l l l l l 

Basketweave MS 2 96 in. (2438 mm) 3, 5 l l l l l l l 

Basketweave ES*** 3 96 in. (2438 mm) 1, 3, 5, 10 l l l l l l 

Basketweave NT 96 in. (2438 mm) 10 l l l l l l 

Basketweave 4000 4 96 in. (2438 mm) 3, 5, 10 l l l l l 

Basketweave 3000 94 in. (2388 mm) 14 l l l l 

Basketweave 2000 4 94 in. (2388 mm) 5, 10 l l l l 

Basketweave TS 94 in. (2388 mm) 1, 3 l l l l l l l 

Basketweave Eco* 96 in. (2438 mm) 3, 5 l l l l 

Sheer – Designer – Add style while reducing glare and solar heat gain 

Vela 116 in. (2946 mm) 3 l l l l l l l 

MS Designer 2 96 in. (2438 mm) 3, 5 l l l l l l 

Jacquard** 96 in. (2438 mm) 5, 7, 10 l l 

Cinq 116 in. (2946 mm) >20 l l l l 

Opac 116 in. (2946 mm) >20 l l l l 

Proton (Trevira CSTM) 1 80 in. (2032 mm) >10 l l l l 

Sheer – Dual-Sided – Maintain outside view and reduce heat gain with a light-colored backing for solar reflectance 

Discontinued - Value Select 3 1 96 in. (2438 mm) 3, 5 l l l l l 

Basketweave 27 96 in. (2438 mm) 1, 3, 5, 10 l l l l l 

Basketweave ST 96 in. (2438 mm) 5 l l l l l 

NEW Basketweave Silver 92 in. (2337 mm) 4 l l l l l 

Dim-Out – Translucent – Reduce view to shapes and shadows 

Value Select 1 96 in. (2438 mm) 1 l l l l l 

Basketweave 94 in. (2388 mm) 1 l l l l l 

Translucent P 76 in. (1930 mm) 1 l l l l l l l l 

Dim-Out – Privacy – Allow light to penetrate through fabric without view of shapes and shadows 

Obion 76 in. (1930 mm)

.75 .75 .75" 

.75" 

.75 .75" 

Lutron® | The Classico Collection stocking categories 

Lutron® | The Classico Collection fabric rules 

Category 1: Stocked 

Completed shades are available for shipping 

within 15 business days from receipt of order, 

and within 10 business days if a Speed-E-order 

is placed. 

Category 2: Premium 

Completed shades are available for shipping within 

20 business days from receipt of order. 

Please note that the following sampling information 

applies to both stocked and premium fabrics: 

• Memo sample requests will be processed within 48 

to 72 hours. Refer to the SCT under marketing 

materials for model numbers or call your Lutron 

Customer Service representative for assistance. 

• Fabric binder cards are available for these 

fabrics. Binder update kits will be provided FREE 

of charge to those who have registered their 

fabric binders. If your fabric binder has not been 

registered, please visit www.lutron.com/binders 

to register. In September 2011, individual binder 

cards will be available to purchase for $5.00 dealer 

cost. Refer to the SCT under marketing materials 

for model numbers or call your Lutron Customer 

Service representative for assistance. 

Category 3: Custom 

• Completed shades are available for shipping within 

30 business days from receipt of order, subject 

to availability. 

• Memo samples are to be provided by the fabric 

supplier. Contact your Lutron Customer Service 

representative to process these samples. 

• Fabric binder cards will not be available 

for custom fabrics. 

Railroading 

Railroading fabric is an option for applications 

requiring shades wider than the usable roll width. 

Railroading rotates the fabric 90 degrees from its 

typical orientation. If the fabric has a distinct pattern, 

please note that this pattern will also be rotated 

90 degrees, thereby altering the final appearance 

of the shade. 

Standard shade 

For applications 

that are narrower 

than the usable 

roll width 

Seaming/Welding 

Some fabrics can be seamed/welded together in 

order to increase the size of a railroaded shade 

beyond its fabric roll width. This technique is used 

to achieve long, wide shades. If a fabric has a 

distinct pattern, aligning the pattern during seaming 

may alter the final appearance of the shade. 

Railroaded and seamed shade 

Railroaded shade 

For applications that are 

wider than the usable 

roll width 

Seam/weld 

For applications that require a 

railroaded shade and a length that 

exceeds the usable roll width 


oller shades | bottom bars 

roller shades | sealed battens 

The Lutron® bottom bar offers a clean aesthetic at the 

base of the shade. It is available in sealed, half-wrap or 

exposed styles. 

Light-blocking wool pile is available for blackout shades with 

1 inch exposed bottom bar. Optional side channels are also 

available for a complete light seal in blackout applications. 

The bottom bar is available in white, anodized aluminum, 

black, or bronze. The endcaps are white, gray, black, or 

bronze, and coordinate with the exposed bottom bar color or 

with the fabric on half-wrap bars. (Gallery Collection fabrics 

use half-wrap architectural bottom bar and 1 inch exposed 

bottom bar only.) 

Facing room 

Half wrap architectural 

Side view 

Sealed battens 

For shades that are very tall or very wide, 

horizontal battens can be seamed into the 

fabric to provide stability and help ensure the 

best performance. (For use with Classico 

Collection fabrics only.) Refer to the Shade 

Aesthetics Basics guide (Application Note #15) 

for more information. 

Sealed batten 

Examples: 

Facing room 

Sealed (2 sizes available) 

Side view 

Facing room 

Exposed architectural 

Side view 

Facing room Side view Facing room Side view 

Oval 

1 inch exposed 

(For use with cable guided shades.) 

Tall shade with battens 

(shown: approximately 16 ft. tall) 

Wide shade with batten 

(shown: approximately 15 ft. wide) 


fabric | The Gallery Collection by Lutron® 


Fabric Name 

Usable 

Roll Width 

Openness 

Factor(s) (%) 

Railroading 

Seaming 

PVC-free 

Sheer – Sculpted – Bring light into a room through unique patterns created by fiber-etching 

Bali (White) 84 in. (2134 mm) 6 l l 

Bali (Black) 84 in. (2134 mm) 4 l l 

Fine Line 156 in. (3963 mm) >20 l l l l 

Nest 77 in. (1956 mm) >25 l l l 

Discontinued - Nuage 116 in. (2946 mm) 5 l l l 

Pixel R 76 in. (1930mm) >20 l l l l l l 

Snow Drops 77 in. (1956 mm) >15 l l l 

Thin Line Floral 77 in. (1956 mm) 3 l l l 

Vector R 76 in. (1930 mm) 6 l l l l l l 

Sheer – Texture – Add depth with these three-dimensional weaves 

3 Weaves 77 in. (1956 mm) 6 l l l 

Bali (Linen) 84 in. (2134 mm) 5 l l 

Basketweave (White) 85 in. (2159 mm) 9 l l l l 

Basketweave (Linen) 85 in. (2159 mm) >10 l l l l 

Burlap 50 in. (1270 mm) † 9 l l l 

Discontinued - Clew 64 in. (1626 mm) 2 l l l 

Crosshatch (White) 50 in. (1270 mm) † 9 l l l l 

Crosshatch (Natural) 50 in. (1270 mm) † 1 l l l l 

Light Linen 77 in. (1956 mm) 1 l l l 

Plain Linen 77 in. (1956 mm) 3 l l l 

Scratch (White) 77 in. (1956 mm) 20 l l l l 

Scratch (Beige) 77 in. (1956 mm) 1 l l l l 

Sheer – Metallic – Coordinate finishes in a room with woven metallic accents 

Kago 70 in. (1778 mm) 12 l l 

Plains 70 in. (1778 mm) 7 l l 

Sugi 70 in. (1778 mm) 7 l l l 

GREENGUARD® 

Certified (US) 

Oeko-Tex® 

Standard 100 

Certified (Europe) 

NFPA 701 

Fire Rated 

(US) 

M1 Fire Rated 

(Europe) 

Stocked 

(Category 1) 

Premium 

(Category 2) 

Custom 

(Category 3) 

Dim-Out – Translucent – Reduce view to shapes and shadows 

Boxstitch* 70 in. (1778 mm) 1 l l l 

Singing in the Rain* 68 in. (1727 mm)

.75 .75 .75" 

.75" 

.75 .75" 

Lutron® | The Gallery Collection fabric rules 

Maximum heights/widths 

Fabric maximum height and width limits are 

156 in. (3963 mm), with the exception of Singing 

in the Rain, which has maximum limits of 120 in. 

(3048 mm), and Fine Line, which has maximum 

limits of 78 in. (1981 mm) high. 

Bottom bar options 

This collection can only use architectural bottom 

bars. Architectural bottom bars are available as 

exposed or half wrapped. Bottom bar colors: 

White, anodized aluminum, black, and bronze. 

Endcaps coordinate with the selected fabric. 

Railroading 

Railroading fabric is an option for applications requiring shades 

wider than the usable roll width. Railroading rotates the fabric 

90 degrees from its typical orientation. If the fabric has a distinct 

pattern, please note that this pattern will also be rotated 

90 degrees, thereby altering the final appearance of the shade. 

Boxstitch, Kago, Plains, and Sugi cannot be railroaded. 

Standard shade 

Railroaded shade 

Solar properties 

A complete listing of solar performance metrics 

is available online at www.lutron.com/fabrics. 

Fire ratings 

Basketweave, Boxstitch, Kago, Montana, Pixel R, 

Plains, Sugi and Vector R fabrics are fire retardant 

according to US Standard NFPA 701. All others are 

not currently rated. 

For applications 

that are narrower 

than the usable 

roll width 

For applications that are 

wider than the usable 

roll width 

Lead time 

All fabrics in The Gallery Collection have a 

Premium stocking level. Completed shades are 

manufactured and available for shipment within 

20 business days of order receipt. (Boxstitch and 

Singing in the Rain are exceptions: they have a 

Custom Stocking level and a 30-day leadtime.) 

Horizontal patterns 

Several fabrics in the Gallery Collection display 

a distinct horizontal pattern. Due to variations in 

the shade material and wearing process, these 

patterns may not match perfectly across 

adjacent shades. 

Seaming/Welding 

Some fabrics can be seamed/welded together in order to 

increase the size of a railroaded shade beyond its fabric roll 

width. This technique is used to achieve long, wide shades. 

If a fabric has a distinct pattern, aligning the pattern during 

seaming may alter the final appearance of the shade. 

Montana and Sugi can be seamed. 

Railroaded and seamed shade 

Seam/weld 

For applications that require a railroaded shade and a 

length that exceeds the usable roll width 


fabric | The Avant CollectionTM by Lutron® 


Pattern Fiber Content Available 

Colors 

Sheers - for use with drapery or Kirbé® vertical drapery system 

Roll Width 

Master Cut* 

Suggested 

Fire 

Retardant 

New Batiste 100% Polyester 5 118 in. (2997 mm) l 

Touch 100% Polyester 2 106 in. (2692 mm) 

Dalton 100% Polyester 4 118 in. (2997 mm) l 

Discontinued - Oasis* 100% Polyester 3 118 in. (2997 mm) l 

Soft fabrics - for use with drapery, cornices, and Roman shades with CERUS® safety technology 

Acaulis 

99% Polyester 

4 54 in. (1372 mm) 

1% Lurex 

l 

Aveeno 100% Polyester 3 56 in. (1422 mm) l 

Bangkok 

100% Inherent FR Polyester 

12 54 in. (1372 mm) 

l 

Bangle 

55% Polyester 

6 57.75 in. (1467 mm) 

45% Nylon 

l 

Cana 

65% Polyester 

4 54 in. (1372 mm) 

35% Cotton 

l 

Chateau 100% Polyester 3 57.5 in. (1461 mm) l 

Chic 100% Polyester 4 54 in. (1372 mm) l 

Demeter 

50% Polyester 

4 58 in. (1473 mm) 

50% Acrylic 

Eris 100% Silk 2 54 in. (1372 mm) 

Fausta 

55% Linen 

4 54 in. (1372 mm) 

45% Rayon 

l 

Hermes 100% Silk 1 54 in. (1372 mm) 

Honduras 

100% Polyester 2 55 in. (1397 mm) 

with 100% Rayon Embroidery 

l 

Jameson 100% Polyester 2 54 in. (1372 mm) l 

Nevis 100% Polyester 3 54 in. (1372 mm) 

Paddock Shawl 100% Cotton 3 54 in. (1372 mm) l 

Ragen 100% Polyester 6 60 in. (1524 mm) l 

Suspicion 100% Polyester 9 58 in. (1473 mm) 

Tendril 100% Polyester 118 in. (2997 mm) l 

Torrey Pines 60% Cotton 

40% Polyester 

2 54 in. (1372 mm) 

Pattern Roll Width Edge binding 

available 

Master Cut 

Suggested 

Woven woods - for use with Roman shades with CERUS® safety technology 

Angel River 96 in. (2438 mm) l l 

Aris 96 in. (2438 mm) l l 

Bacopa 96 in. (2438 mm) l 

Batang 96 in. (2438 mm) l l 

Beijing 96 in. (2438 mm) l l 

Bengali 72 in. (1829 mm) l l 

Cheras 96 in. (2438 mm) l l 

Dynasty 120 in. (3048 mm) l l 

Gentle Orchid 96 in. (2438 mm) l l 

Ha Tien 96 in. (2438 mm) l l 

Hanoi 96 in. (2438 mm) l l 

Hunan 96 in. (2438 mm) l l 

Jambu 96 in. (2438 mm) l l 

Jilin 96 in. (2438 mm) l l 

Juba 96 in. (2438 mm) l l 

Kaede 96 in. (2438 mm) l l 

Madras 96 in. (2438 mm) l 

Mohave 96 in. (2438 mm) required l 

Nepal 96 in. (2438 mm) l l 

Rucca 96 in. (2438 mm) l l 

Sapporo 96 in. (2438 mm) l l 

Sasarido 96 in. (2438 mm) l l 

Satria 96 in. (2438 mm) l l 

Sibu 82 in. (2083 mm) l l 

Steffe 96 in. (2438 mm) l l 

Sumo 96 in. (2438 mm) l 

Taipei 96 in. (2438 mm) l l 

Taishan 96 in. (2438 mm) l l 

Waja 96 in. (2438 mm) l l 

Zhen 96 in. (2438 mm) l l 

* Master cut samples are large samples, available through the SCT or Customer Service. 

Completed shades are manufactured and available for shipment within 

30 business days of order receipt. 


Lutron® | The Avant CollectionTM fabric rules 

Lutron® | Customer’s own material (COM) spec process 

The following details can aid in ordering and 

installing The Avant Collection window treatments. 

Privacy 

Please note that some materials have open 

weaves. Although they may block outside views 

during the day, at night they may not provide 

sufficient privacy. To achieve privacy for the 

KirbeTM vertical drapery system, pair with the 

optional roller shade feature. For woven wood 

Roman shades, use a fabric lining. 

Roman shades 

Soft fabric Romans must be lined. Woven wood 

Roman shades do not require lining. 

Fabric relaxation 

Soft fabrics have not experienced gravity. 

They have been stored on a roll until made into 

a drapery or Roman shade. It is natural for fabrics 

to “relax” and sometimes lengthen over time. When 

measuring for drapery length, please allow proper 

clearances for sills and floors. Lining drapery adds 

structure and can minimize relaxation. 

Woven woods are a natural and sometimes heavy 

shading material. These materials may relax over 

time as well. 

Consolidating orders 

Fabric and woven wood samples aid in material 

selection. Fabric runs and woven wood dye lots are 

subject to subtle variation. When ordering multiple 

shades for a room or home, it is best to place 

the entire order at one time, as opposed to 

breaking up the order. This will ensure consistent 

color across all shades on a project. 

Customer’s Own Material (COM) 

COM may be used to create Roman shades, drapery 

panels, and cornices. Contact Customer Service for 

more information on submitting COM for testing and 

approval. 

Process for evaluating COM fabrics for 

Lutron Shading Products 

1. Build a quote in the SCT for the product you 

require, selecting any standard fabric as 

a placeholder. 

2. In the SCT notes field, please include: 

a. Fabric name 

b. Color 

c. Pattern vertical repeat (inches) 

d. Roll width (inches) 

e. The related line item number 

f. Fabric weight (oz./sq. yd.) + thickness 

3. Submit your quote using the Lutron eQuote feature. 

Lutron will respond to your quote request in 4 days or 

fewer. and will provide you with an estimate of the price 

to complete your shades, the dimensions of the fabric 

that will be required for evaluation, and shipping details. 

Please note that the price provided is only an estimate, 

and is contingent upon our engineering 

evaluation of your fabric once submitted. 

Custom printing 

Custom printing is available on select Avant 

Collection soft fabrics. Please contact customer 

service for more information. 


fabric | stocking categories 

Lutron® shading solutions | controls 

Stocking Categories 

Lutron® roller shade fabrics have been divided into 

three stocking categories. This stocking program 

allows us to offer a wider variety of fabrics for 

your use. To determine which are stocked, 

premium, or custom, please refer to the matrices 

in this chapter. Please review the categories below 

for fabric availability information and 

product support. 

Category 1 – Stocked 

• Completed shades are available for shipping 

within 15 business days from receipt of order, 

and within 10 business days if a Speed-e order 

is placed. 

Category 3 – Custom 

• Completed shades are available for shipping in 

a minimum of 30 business days from receipt of 

order - subject to availability. 

• Memo samples are to be provided by the fabric 

supplier. Contact your Lutron customer service 

representative to process these samples. Once an 

order has been placed, fabric samples will 

be shipped directly to you from the fabric supplier. 

• Fabric Binder Cards will NOT be available for 

custom fabrics. 

Category 2 – Premium 

• Completed shades are available for shipping within 

20 business days from receipt of order. 

Please note that the following sampling 

information applies to both Category 1 

and Category 2 fabrics only: 

• Memo Samples will be processed within 48 to 

72 hours. Refer to the SCT under “Marketing 

Materials” for model numbers or call your 

Lutron customer service representative 

for assistance. 

• Fabric binders are available for these fabrics. 

Refer to the SCT under “Marketing Materials” 

- Classico Collection (FAB-BINDER-SET) 

- Gallery Collection (GALLERY-BNDR-SET) 

- Avant Collection (AVANT-BINDER) 

or call your Lutron customer service representative 

for assistance. 

Please visit www.lutron.com/binders to 

register your binder in order to receive FREE 

binder update kits in the future. 

96 | Lutron 

Lutron | 97

Lutron® controls | seeTouch® keypads 

Lutron seeTouch keypads work with Sivoia QED® and Sivoia® QS systems 

to control Lutron shading solutions and lights. Keypads are available with 

standard or custom engraving in a wide selection of colors and finishes. 

Lutron controls are available in many different button configurations offered in three 

distinct wallplate styles: 

seeTouch keypad operation: 

• Open button allows shade or drapery to move 

to its open limit 

• Presets allow user to select preferred 

settings for shading solutions 

• Close button allows shade or drapery to return 

to its closed limit 

• Raise/lower buttons allow for fine-tuning shade 

or drapery position 

• Not shown: Group buttons allow individually 

selected groups of shades to move in concert 

Lutron keypads are programmable and can be 

customized for every installation. 

Designer (insert) 

2.94 in. w x 4.69 in. h 

(75 mm x 119 mm) 

Architectural (insert) 

2.75 in. w x 4.625 in. h 

(70 mm x 118 mm) 

Architectural (non-insert) 

seeTouch 

(QS shown - Architectural non-insert) 

Insert style allows for a combination of lighting 

and shading controls. Interchangeable 

faceplates allow for flexible installations with 

multiple ganged controls. Any Lutron 120V 

dimmers and low voltage keypads may be 

mounted in a common backbox. 

Non-insert, architectural style offers an elegant 

solution best suited for a standalone shade control. 

Lutron controls are also available with custom engraving options (see page 100). 

seeTouch keypads are available in over 40 colors and finishes including metals. 

See the “Colors of Lutron” brochure (P/N 367-949) for more information. 


seeTouch® keypads | engraving options 

Lutron® | control technology overview 

All Lutron® keypads can be 

custom engraved 

Engraving for tabletop keypads is now offered 

within the Shade Configuration Tool, allowing 

for quick and easy customization. 

Sivoia® QS Sivoia® QS Wireless Sivoia QED® 

RS232/ethernet interface l l 

New procedure for engraving:* 

• Select a keypad in the Shade Configuration 

Quantum® integration 

l 

Tool (SCT) 

• Within the customization, select 

“Custom Engraving” option 

• Select position of text and text case 

• Click on the image of the keypad shown 

and enter text on buttons as desired 

• Add the customized keypad to your order 

* Note: Custom engraving within SCT available 

with limited selection of products. 

RadioRA® 2 tabletop keypad 

RadioRA® 2 integration 

GRAFIK Eye® QS integration l l 

HomeWorks® Illumination 

integration 

l 

l 

HomeWorks® QS integration l l 

Contact closure interfaces l l l 

Low voltage power l l l 

Individual power supplies l l l 

Multiple output power supplies l l l 

Lutron quiet electronic drive l l l 

Intelligent hembar alignmentTM l l l 

l = Available 

seeTouch® designer keypad 

(Sivoia QED-style shown) 

Standard features of all control technologies 


Sivoia® QS | seeTouch® QS keypads 

Lutron® shading solutions | GRAFIK Eye® QS 

seeTouch QS keypads control shading solutions and 

lights. All keypads are available with standard or 

custom engraving in a variety of colors and finishes. 

Architectural style only (insert and non-insert). 

Color and finish ordering sample: 

QSWS2-3BRT-(I/N)-45-E01 

Include I for insert style OR 

Include N for non-insert style 

Include color code (45) to specify color/finish. 

GRAFIK Eye QS wall units control shades, drapery, and lights. All keypads are available with 

standard or custom engraving in a variety of colors and finishes. 

QSWS2-2BRL-N- 

WH-E01 

Two button keypad 

with raise/lower 

QSWS2-3BRL-N- 

WH-E01 

Three button keypad 


QSWS2-5BRL-N- 

WH-E01 

Five button keypad 


QSWS2-1RLD-N- 

WH-E01 

Three-group, 

two button keypad 


QSWS2-1RLD-N- 

WH-E02 

Three-group, 

two button keypad 


Venetian Keypads 

QSWKI-2TD-WH-E01 

Dual two button 

keypad with tilt adjust 

QSWS2-2RLD-N- 

WH-E02 


with raise/lower for 

dual shades 

QSWS2-3BRLIR-I-XX-E01 

Three button keypad with tilt 

adjust and infrared reception 

QSWS2-3BD-N- 

WH-E01 


for dual shades 

Sivoia QS components 

QSWS2-3BRLIR-N- 

WH-E01 


with raise/lower and 

infrared reception 

QSE-IR-WH 

Remote infrared eye for Sivoia QS 

lights and shades 

• Receives remote IR signal from handheld 

infrared remote controls 

• Allows simple integration to A/V 

equipment with QS devices via QS Link 

• Available in white (WH) 

A. Scene control 

• 4 scenes and off 

• Backlit, engravable buttons 

• Easy to change in the field 

B. Shade control 

• Open, preset, close 

• Raise/lower 

• Available with none, 1, 2, or 3 

shade group keypad controls 

C. Light control 

• 3, 4, or 6 zones 

(standard 120V model) 

• 6, 8, or 16 zones 

(EcoSystem® model) 

D. Astronomic timeclock 

• Scheduling to meet 

energy codes 

• Includes “after-hours” mode 

E. Information display 

• Energy savings 

• Lighting levels 

• Timeclock information 

F. Infrared receiver 

• Allows wireless connectivity 

to handheld infrared remote 

G. NEW RF tranceiver 

• Allows wireless connectivity 

to other RF devices 

NEW Wireless RF 

connections to: 

• Sivoia® QS Wireless shades 

• Radio Powr SavrTM occupancy/ 

vacancy sensor 

• Pico® wireless keypads 

Wired connections to: 

• Sivoia QS shades 

• Occupancy/vacancy sensors 

• seeTouch® QS wall keypads 

• RS-232/Ethernet interfaces 

• Power modules 

EcoSystem low voltage 

connections to: 

• 

EcoSystem, Hi-lume® 3D 

ballasts, and/or Hi-lume LED 

drivers (64 maximum) 

• Daylight sensors 

• Occupancy/vacancy sensors 

For a complete guide on keypad options with model numbers, please refer to the 

seeTouch QS wallstation specification submittal at www.lutron.com/SivoiaQS 

For more information on GRAFIK Eye QS, visit www.lutron.com/GrafikEyeQS 


Sivoia® QS Wireless | seeTouch® QS wireless keypads 

seeTouch QS wireless keypads control shading 

solutions and lights. All keypads are available with 

standard or custom engraving in a variety of colors 

and finishes. Designer insert style only. 


QSW4-3BRLT-45-E01 

Include color code (45) to specify color/finish. 

Sivoia® QS Wireless and RadioRA® 2 compatible keypads (scene controls) 

Sivoia QS Wireless keypads 

QSWK4-3BR-WH-E01 



QSWK4-5RI-WH- 

E01 



and infrared reception 

QSWK4-2RD-WH-E01 




QSWK4-2RD-WH-EGN 


for lights and shades 


QSWK4-2BR-WH-E01 



QSWK4-3RI-WH-E01 




QSWK4-5BR-WH- 

E01 



Sivoia QS Wireless tabletop keypads (shade controls) 

QSWK4-3BD-WH-E01 



QSWK4-3BD-WH-EGN* 


for lights and shades 

QSWK4-7B-WH-NST* 

Seven button keypad 

QSWK4-6BR-WH- 

NST* 

Six button keypad 


QSW4-T5S-WH-E01* 

Five button 

tabletop keypad 



Ten button 




Fifteen button 



Sivoia QS Wireless and RadioRA 2 compatible tabletop keypads 

Sivoia QS Wireless components 

RF receiver 

Remote RF receiver for Sivoia QS Wireless shades 

• Receives remote RF signal from handheld remote controls 

• Available in white (WH) 

• 7.18 in. x 0.84 in. (182 mm x 21 mm) 

QSW4-T5R-WH-NST* 

Five button 



QSW4-T10R-WH-NST* 

Ten button 



SQA-2DN-XX-E01* 

Fifteen button 



* Require use of main repeater 


Sivoia® QS Wireless | RF remote controls 

0.31 in. 

(8 mm) 

2.6 in. 

(66 mm) 

The Pico® wireless control is available in a 

variety of colors to coordinate with any décor. 

Note: The “Favorite” button is silver on 

White/Gray Pico only. All other offerings have 

uniform button colors. 

Dimensions of Pico® control and tabletop pedestal 

Easy reconfiguration for use as a handheld control, wall-mount control, 

or tabletop control* using the optional pedestal or wall mount kit. 

1.30 in. 

(33 mm) 

Pico controls are now available with QSM.* 

Pico Model Number: 

PJ- aaaa -G bb - c dd 

aaaa 

bb 

c 

dd 

Button Configuration Code 

Color Code 

Button Marking Type Code 

Button Marking Code 

aaaa 

Button Configuration Code 

2 Button...................................2B 

2 Button with Raise/Lower.......2BRL 

3 Button...................................3B 

3 Button with Raise/Lower.......3BRL 

bb 

Gloss Color 

Code 

White........................................WH 

Black........................................BL 

Ivory.........................................IV 

Light Almond............................LA 

White / Gray.............................WG 

(Top and Raise buttons are White; Preset, 

Lower, and Bottom buttons are Gray) 

c 

Button Marking Type Options Code 

Text .................................................T 

Icons ...............................................I 

For more information, see 369-453. 

PJ-3BRL-GWH-T02 

dd 

Button Marking Options Code 

Light.........................................01 

Shade ......................................02 

Shade 1 ...................................05 

Shade 2 ...................................06 

Screen .....................................07 

Drape ......................................08 

Blackout ..................................09 

Sheer ......................................10 

Blind ........................................13 

Power ......................................14 

Custom bases for Pico 

Customize your Pico tabletop control with 

white or black gloss color bases. 

* Pico controls are also compatible with QS wired 

shades using QS Link. This allows for seamless 

reconfiguration of controls without rewiring. 

0.31 in. 

(8 mm) 

Wall-mount configuration: 

1.46 in. 

Claro® wallplate, Pico control, and wallplate adapter (37 mm) for Pico 

2.95 in. 

(75 mm) 

1 2 3 4 

1.77 in. (45 mm) 

* Dual pedestal also available. 

2.6 in. 

(66 mm) 

Wallplate adapter and wallplate sold separately. 

1.77 in. (45 mm) 

2.95 in. 

(75 mm) 

1.46 in. 

(37 mm) 

2.94 in. w x 4.69 in. h 

(75 mm x 119 mm) 


Lutron® | RadioRA® 2 integration 

Sivoia QED® controls | seeTouch® keypads 

RadioRA 2 is a wireless light control system that provides convenient 

and intuitive control of lights, shades, audio-visual devices, and 

temperature in a in a single room or throughout the whole home. 

It installs easily, programs quickly and operates reliably with 

Clear ConnectTM RF Technology. All Sivoia® QS Wireless shades and 

devices are compatible with RadioRA 2. 

• Start with any area and simply add components at any time to 

grow the system from a single room to whole home – scales from 

2 to 100 devices 

• Works directly with Sivoia QS Wireless shades and draperies, 

seeTouch keypads control Lutron® shading solutions 

and lights. All keypads are available with standard or 

custom engraving in a variety of colors and finishes. 

Designer and architectural styles (insert and 

non-insert) available. 


SQ(A/D)-2(I/N)-XX-E01 

Include A for architectural style OR 

Include D for designer style 

Include I for insert style OR 

Include N for non-insert style 

Include color code (XX) to specify color/finish. 

GRAFIK Eye® QS Wireless and Radio Power SavrTM 

occupancy/vacancy sensors 

• Control from remotes, home automation systems, mobile devices, 

and more – all in one repeater 

• Provides open integration with any device capable of sending 

and/or receiving RS232 or IP commands to control lights and shades 

• Intuitive and simple PC-based or button-press programming 

SQD-2I-XX-E01 


insert style shown 

SQA-3N-XX-E01 


non-insert style shown 

SQA-2RN-XX-E01 






Components 

SQA-4EN-XX-E01 

Four button keypad 






SQA-2DN-XX-E01 

Four button keypad 

for dual shades or 

two group applications 

SQA-3DN-XX-E01 

Six button keypad 

for dual shades or 

two group applications 

Main repeater 

• Provides open integration with other systems 

and devices with PC programming 

• Included astronomic timeclock allows system 

control based on time of day as well as 

sunrise/sunset 

Auxiliary repeater 

• Extends system RF range in larger applications, 

outdoor spaces, and between buildings 

• Can be used wirelessly within the home, or wired 

to another repeater to span long distances 

Sivoia QED components 

SV-IR-EXT-10 

10 ft. (3 m) extension cable for Sivoia QED 

• 5 extensions maximum 

SV-IR-WH 

Remote infrared eye for Sivoia QED 

• Receives remote IR signal from any Sivoia QED 

handheld infrared remote controls 

• Available in white (WH) and royal plum (RP) 


Lutron® | IR remote controls 

Lutron® | IR remote controls 

Lutron infrared transmitters control single or dual groups of window treatments, as well as light 

and shade groups in rooms with integrated systems. The transmitters operate with Sivoia® QS, 

Sivoia® QS Wireless, and Sivoia QED® systems, and feature a clean and simple aesthetic. Labels 

shown are standard. 

Convenience 

Choose from a variety of hand-held remotes. Lutron electronic drive units offer 

built-in infrared reception. 

Classic style 

SVIT-WH (as shown) 

• 

Open, Close, Raise/Lower 

• Dimensions: 

Width: 1.5 in. (38 mm) 

Length: 4.6 in. (117 mm) 

Depth: 0.65 in. (17 mm) 

Single shade group 

• 

Open, Close, Raise/Lower 

Favorite preset button 

SVIT-SH-WH (as shown) 

• Shade 

SVIT-DR-WH 

• Drapery 

SVQ-3PIT-WH 

Three preset hand-held 

infrared remote 

• Offers open/close, three 

programmable presets and 

fine-tune raise/lower control 

• Can control one shade or a 

group of shades together 

• Dimensions: 

Width: 1.5 in. (38 mm) 

Length: 5.69 in. (145 mm) 

Depth: 0.88 in. (22 mm) 

SVQ-4GD-OCIT-WH 

Multi-function hand-held 

infrared remote - 

Sivoia QED only 

• Designed specifically to control 

both individual and groups 

of shades 

• Ideal for dual-mounted shades 

(to control two shades on the 

same window) 

2 shade groups 

• 

Group 1: Open, Close, 

Raise/Lower, 


• 

Group 2: Open, Close, 

Raise/Lower, 


SVIT-SC-BL-WH (as shown) 

• Screen 

• Blackout 

SVIT-SR-BL-WH 

• Sheer 

• Blackout 

SVIT-SH-DR-WH 

• Shade 

• Drapery 

SVIT-SH-SH-WH 

• Shade 1 

• Shade 2 

(Custom labelling available.) 

Shade and lighting control 

Shades: Open, Close, 

Raise/Lower, 


Light: On, Off, Raise/Lower, 


SVIT-GRX-DR-WH 

• 

Light (GRAFIK Eye® lighting) 

• 

Drapery (Sivoia drapery) 

SVIT-GRX-SH-WH (as shown) 

• 

Light (GRAFIK Eye lighting) 

• 

Shades (Sivoia shades) 

SVIT-MIR-SH-WH 

• 

Light (Maestro® IR lighting) 

• 

Shade (Sivoia shades) 

SVIT-MIR-DR-WH 

• 

Light (Maestro® IR lighting) 

• 

Drapery (Sivoia drapery) 

(Custom labelling available.) 


Lutron® dimmers | seamless coordination 

Complement your design using the colors of Lutron for a coordinated look 

throughout your space. Lutron dimmers and accessories come in a variety 

of styles and finishes and add ambiance, convenience, and energy savings. 

See the “Colors of Lutron” brochure (P/N 367-949) for more information. 

Lutron dimmers 

Available in Designer Gloss or Satin Colors® finishes: 

Multiple devices with line and low-voltage can be mounted under 

a common wallplate using a standard barrier backbox (see Lutron® 

Application Note #213 at www.lutron.com/applicationnotes). 

Wallplate configurations 

2-gang Satin Colors® wallplate with Maestro® and shade keypad 

Maestro® Diva® LyneoTM Lx Skylark® 

Abella® Ceana® Ariadni® 

Wallplate configurations 

2-gang gloss wallplate with Abella® and shade keypad 

Architectural Matte and Architectural Metal finishes: 

Vierti® Nova Ta® Nova® Vareo® 


Lutron® accessories | seamless coordination 

Lutron® shading solutions | wiring 

Lutron accessories 

Available in Designer Gloss, Satin Colors®, Architectural Matte, or Architectural Metal finishes: 

GFCI Dimmable receptacle receptacle 6-port jack 

phone jack cable jack 1-6 gang designer 

opening wallplates 

1-6 gang traditional 

opening wallplates 

114 | Lutron 

Lutron | 115

Sivoia® QS | wiring overview 

System Wiring Overview: QS Smart Panel Power Supply 

One shade/drapery per output with individual power supply 

Sivoia® QS shade/drapery 

Sivoia QS 

roller shade 

Sivoia QS 

drapery track 

Sivoia QS 


Refer to wire length chart 

on page 116 for wire gauge 

and distance requirements 

4 conductor wire length, 

gauge and number of 

shades or draperies 

varies. Refer to QS 

Power Supply Panel 

Wiring Guide below. 

MUX 

MUX 

Com 

MUX 

QSPS-P1-1-50 

MUX 

+24 VDC 

Com 

QSPS-P1-10-60 

10 Output Smart Panel power supply 

QS Link Wiring 

The following link rules must be observed for proper operation: 

1. Use only cable with at least one twisted/shielded pair for communications (MUX and MUX). 

2. Total length of wire in entire system must be less than 2,000 ft (609 m). 

Sivoia QS Power Supply Panel Wiring Guidelines 

Maximum devices per one output 

Maximum distance per one output based on wire gauge 

Shades + Controls 

12 AWG (4 mm 2 ) 

QSH-CBL-L-500 

QSH-CBLP-L-500 

16 AWG (1.5 mm 2 ) 

QSH-CBL-M-500 

QSH-CBLP-M-500 

18 AWG (1 mm 2 ) 

GRX-CBL-346S-500 

Example: One shade/drapery per power panel output 

Sivoia QS shade/drapery 

Sivoia QS shade/drapery 




120 V~ 

60 Hz 

None 

1 Sivoia QS shade/ 

drapery* drive unit 

2 Sivoia QS roller 64TM, ≤ 

30 sq ft. (2.75 sq m) each 

3 Sivoia QS roller 64, ≤ 


2 Sivoia QS roller 100TM, ≤ 


Up to 8 seeTouch® 

QS keypads 

Up to 1 seeTouch 

QS keypad 

1200 ft. (350 m) 500 ft (150 m) 300 ft (90 m) 

500 ft. (150 m) 200 ft. (60 m) 100 ft. (30 m) 

None 200 ft. (60 m) 75 ft. (20 m) 50 ft. (15 m) 

Sivoia QS Individual Power Supply Wiring Guidelines 

1 Sivoia QS 

shade/drapery* 

None 250 ft. (75 m) 100 ft. (30 m) 50 ft. (15 m) 

None 

Up to 8 seeTouch 

QS keypads** 

1200 ft. (350 m) 500 ft. (150 m) 300 ft. (75 m) 

* roller 20TM, roller 64, roller 100, roller 150TM, roller 200CW, roller 225TM, D105, D145, D175, 

tensioned shades, Kirbé®, Roman shades, Venetian blinds 

** 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E) 

seeTouch® QS 

keypad 

QSPS-P1-10-60 


Sivoia® QS 

power options | power panel wiring diagram 

Sivoia® QS 

power options | QS Link power supply 

Sivoia QS with GRAFIK Eye® QS system wiring 

Smart Panel Power Supply, single shade per output 

Individual QS power supply 

QSPS-P1-1-50 

The power supply may be surface mounted by using the mounting tabs 

if desired. Unplug line voltage cable of the power supply before wiring 

low voltage terminal blocks. Line voltage cable included. 

Sivoia QS 

shade/drapery 

120 V~ 

60 Hz 

120 V~ 

60 Hz 

Parts 

1.2 in. 

(31 mm) 

2.77 in. 

(70 mm) 

3-pin connector: Communication 

to additional Power supplies 

4-pin connector: Power and 

Communication to QS shade 

or keypads 

4.03 in. 

(102 mm) 

Line voltage input 

Mounting tabs 

QSPS-P1-10-60 

10 Output Smart 

Panel power supply 

MUX 

MUX 

Com 

MUX 

MUX 

24V --- 

Com 




100 Devices 

per link max. 

100 Zones 

QSPS-P1-10-60 

10 Output Smart Panel 

power supply 

To other 

QS Controls 

MUX 

MUX 

Com 

MUX 

MUX 

24V --- 

Com 

Individual QS J-Box Power Supply 

QSPS-J-1-50 

The power supply is designed to be mounted on a junction box in a remote location away from occupants. 

Parts 

seeTouch® QS 

keypads 

GRAFIK Eye® QS 

Occupancy 

sensor 

COM 

24 

MUX 

MUX 

COM 

MUX 

MUX 

Maximum devices powered 

Total wire length 

(104 mm) 

of link (B) 

from one QSPS-1-50 

4.3 in based on wire gauge 

(109 mm) 

1.4 in 

Maximum devices powered 

Total wire length #18 of link AWG (B) (1 mm 

#12 AWG #16 AWG 

2 ) 

(36 mm) 

Shadesfrom one QSPS-1-50 Controls 

(4 mm 2 ) (1.5 based mmon 2 Black 

wire gauge GRX-CBL- 

Green ) White 

346S-500 

#18 AWG (1 mm 

#12 AWG #16 AWG 

2 ) 

1 Sivoia Shades QS 

None 

Controls 250 ft. 100 ft. 

50 GRX-CBL- ft. 

shade 

(75 

(4 

m) 

mm 2 ) 

(30 

(1.5 

m) 

mm 2 ) 

Ground 

Hot/Live (17 (100-240 346S-500 m) V~ 50/60 Hz) 

Neutral 

1 Sivoia QS Up to 8 

250 ft. 100 ft. 

None 1200 ft. 500 ft. 

300 

50 

ft. 

ft. 

None shade seeTouch® QS 

(350 

(75 

m) 

m) 

(150 

(30 

m) 

m) 

(75 

(17 

m) 

m) 

keypads* 

Up to 8 

1200 ft. 500 ft. 

300 ft. 

* 2 seeTouch None QS keypads seeTouch® may be QS exchanged for 1 control interface (QSE-CI-NWK-E) 

(350 m) (150 m) (75 m) 

keypads* 

4.1 in 

3-pin connector 

Communication to 

additional Power supplies 

4-pin connector 

Power and Communication 

to QS shade or keypads 

Line voltage input 

100-240 V~ 50/60 Hz 

Mounting location 

* 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E) 


Sivoia® QS 

power options | power panel 

A 

A 

Sivoia® QS 

power | Lutron® supplied cable 

.35 in (9 mm) (white) 

QSPS-P1-10-60 

B 

B 

D 

D 

Sivoia QS cable 

Lutron offers two types of twisted/shielded QS cable which incorporate both power and communications 

into the same bundle. 

16 AWG (1.5 mm²) (black) 

12 AWG (4 mm²) (black) 

16 AWG (1.5 mm²) (red) 

12 AWG (4 mm²) (red) 

C 

C 

22 AWG (0.50 mm²) (violet) 

22 AWG (0.50 mm²) (gray) 

22 AWG (0.50 mm²) (violet) 

22 AWG (0.50 mm²) (gray) 

22 AWG (0.50 mm²) Drain 

.35 in (9 mm) (white) 


.45 in (11.5 mm) (white) 

with cover 

without cover 

QSH-CBL-M-500 Cable 

QSH-CBL-L-500 Cable 

Dimensions 

10.3 in. (262 mm) 

9.5 in. (241 mm) 

17.5 in. (445 mm) 

3.9 in. (99 mm) 

The Sivoia QS power panel uses 

8A. Maximum of one (1) power 

panel per 15A circuit, two (2) panels 

per 20A circuit. 

Lutron® recommends using 

high magnetic circuit breakers for 

power panels. 

120 V~ 

Description 

• Non-plenum rated cable for use with Sivoia QS 

(Plenum cable: QSH-CBLP-M-500) 

Specifications 

• Listed as cable type CL3 

• Available 12 AWG in (4500 mm²) ft. (150 (black) m) spools 

• Five conductors: 

- Common – 16 AWG 12 AWG (1.5(4 mm²) mm²) (red) 

- Power – 16 AWG (1.5 mm²) 

- MUX Data – 22 AWG (0.50 mm²) 

- MUX Data – 22 AWG 

22 AWG 

(0.50 

(0.50 

mm²) 

mm²) (violet) 

- Drain Wire – 22 AWG 22 (0.50 AWG mm²) (0.50 mm²) (gray) 

• Total outer jacket diameter: 0.26 in. (6.6 mm) 

• 300V rated 


• PVC sheath, 90°C rated 

• UL/CSA .45 in listed (11.5 mm) (white) 

• ROHS compliant 

Description 

• Non-plenum rated cable for use with Sivoia QS 

(Plenum cable: QSH-CBLP-L-500) 



• Available in 500 ft. (150 m) spools 

• Five conductors: 

- Common – 12 AWG (4 mm²) 

- Power – 12 AWG (4 mm²) 

- MUX Data – 22 AWG (0.50 mm²) 

- MUX Data – 22 AWG (0.50 mm²) 

- Drain Wire – 22 AWG (0.50 mm²) 

• Total outer jacket diameter: 0.45 in. (11.5 mm) 



• UL/CSA listed 


QSPS-P1-10-60 


Sivoia® QS 

Wireless power options | power panel wiring diagram 

Sivoia® QS Wireless | wiring overview 

System Wiring Overview: QS Wireless Power Supply Panel 

Sivoia QS Wireless 

roller shade 


drapery track 



One shade/drapery per output with individual power supply 

Sivoia QS Wireless shade/drapery* 




QSPSY-P1-10-60 

QS Wireless power supply panel 

Maximum devices per per 

one output one output 

Shades/Drapery 

1 Sivoia 1 Sivoia QS QS Wireless Wireless 

shade/drapery* shade/drapery* drive unit 

drive unit 

2 Sivoia QS Wireless roller 64TM, 

≤ 30 sq 2 ft. Sivoia (2.75 QS sq m) each 

Wireless roller 64TM, 

3 Sivoia ≤ QS 30 Wireless sq ft roller 64, 

≤ 20 (2.75 sq ft. sq (1.80 m) each sq m) each 

QS Wireless Power Supply Panel Wiring Guide 

Sivoia QS Wireless Power Supply Panel Wiring Guidelines 

Maximum distance per one output 

Maximum distance per one output based on wire gauge 

based on wire gauge 

16 AWG 16 AWG 

18 AWG 

12 AWG 12 AWG 

18 AWG 

(1.5 mm²) (1.5 mm (1 mm²) 

(4 mm²) (4 mm 2 ) 

2 ) 

(1 mm 

QSHY-CBLP-M-1000 QSHY-CBLP-M-1000 

2 ) 

500 ft 

(150 m) 

2 conductor wire length, 

gauge and number of 

shades or draperies 

varies. Refer to QS 

Wireless Power Supply 

Panel Wiring Guide 

below. 

500 ft. (150 m) 200 200 ft ft. (60 m) 100 100 ft ft. (30 m) 

(60 m) 

(30 m) 

200 ft. (60 m) 75 ft. (20 m) 50 ft. (15 m) 

3 Sivoia QS 

2 Sivoia QS Wireless roller 100TM, 200 ft 

75 ft 

50 ft 

Wireless roller 64, 

≤ 50 sq ft. (4.6 sq m) each (60 m) 

(20 m) 

(15 m) 

≤ 20 sq ft 

Sivoia (1.8 QS sq m) Wireless each Individual Power Supply Wiring Guidelines 

2 Sivoia QS Wireless 

1 Sivoia roller QS 100TM ≤50 sq ft 

250 ft. (75 m) 100 ft. (30 m) 50 ft. (15 m) 

shade/drapery* (4.6 sq m) each 

* roller None20TM, roller 64, roller 100, roller 150TM, 1200 roller ft. 200CW, (350 m) roller 500 225TM, ft. (150 D105, m) D145, D175, 300 ft. (75 m) 

tensioned shades, KirbéTM, Roman shades 

* roller 20TM, roller 64, roller 100, roller 150TM, roller 200CW, roller 225TM, D105, D145, D175, 

tensioned shades, Kirbé®, Roman shades, Venetians blinds 

Pico® wireless 

control 

Battery powered 

(3 V battery included) 

120 V~ 

60 Hz 


seeTouch® keypad 

Example: One shade/drapery per power panel output 



Pico wireless 

control 

Battery powered 

(3 V battery included) 

120 V~ 

60 Hz 


seeTouch keypad 

QSPS-P1-1-50 





120 V~ 

60 Hz 

122 | Lutron Lutron | 123 

*Not limited to shade or drapery

Sivoia® QS 

Wireless power options | power panel 

A 

A 

Sivoia® QS Wireless power | Lutron® supplied cable 

Dimensions 



10.30 in (262 mm) 

B 

B 

9.50 in (241 mm) 

3.90 in 

(99 mm) 

D 

D 

Sivoia QS Wireless cable 

Lutron offers power cable for Sivoia QS Wireless systems. 

16 AWG (1.5 mm²) (black) 

16 AWG (1.5 mm²) (red) 

18.30 in 

(465 mm) 

17.50 in 

(444 Cmm) 

C 

.206 in. (5 mm) (white) 

with cover 

with cover 

Dimensions 

10.3 in. (262 mm) 

9.5 in. (241 mm) 

17.5 in. (445 mm) 

3.9 in. (99 mm) 

The Sivoia QS power panel uses 

8A. Maximum of one (1) power 

panel per 15A circuit, two (2) panels 

per 20A circuit. 

Lutron recommends using 

high magnetic circuit breakers for 

power panels. 

without cover 

without cover 

120 V~ 

QSHY-CBL-M-1000 

Description 

• Non-plenum rated cable for use with 

Sivoia QS Wireless systems 

(Plenum cable: QSHY-CBLP-M-1000) 




• Two conductors: 

- Common – 16 AWG (1.5 mm²) 

- Power – 16 AWG (1.5 mm²) 

• Total outer jacket diameter: 0.206 in. (5 mm) 







Sivoia QED® | wiring overview 

Sivoia QED® 

power and options | individual transformers 

Sivoia QED power panel 

Common components for a Sivoia QED system 

A 

Low voltage 

B 

communication 

and power wiring 

D 

Sivoia QED 

shades/draperies 

C 

SVQ-PS-xx-1-50 

QED plug-in power supply 

xx - 6 ft. line cord (P1, P2, P3) 

SVQ-PS-J-1-50 

QED junction-box power supply 

Dimensions: 

Width: 4.1 in. (104 mm) 

Length: 4.3 in. (109 mm) 

Depth: 1.4 in. (36 mm) 

Infrared remote 

(optional) 

SVQ-10-PNL 

Sivoia QED 

power panel 

Dimensions: 

Width: 2.75 in. (70 mm) 

Length: 4 in. (102 mm) 

Depth: 1.2 in. (31 mm) 

Sivoia QED keypads 

Communication 

wiring 

Wire Type B 

Sivoia QED system wiring details 

• Sivoia QED utilizes 24V~ for power 

• Wiring may be centralized utilizing a Sivoia QED power panel, or individual 

transformers can be installed for a localized wiring scheme 

Individual transformers 

• For smaller projects, or to more easily 

accommodate retrofit applications 

• Choose from a selection of plug-in and 

junction-box transformers to power individual 

Sivoia QED drives 

• See the Sivoia QED technical reference guide 

(P/N 367-592) or visit www.lutron.com 

for more information. 

Sivoia QED power panel 

SVQ-10-PNL 

• Provides power and communication wiring for 

up to 10 Sivoia QED EDUs 

• Utilizes a custom seven-conductor 

combination communication/power cable 

(SVQ-CBL-250) or specify separate power 

and communication wiring. 

• See the Sivoia QED technical reference guide 

(P/N 367-592) or visit www.lutron.com for 

more information 

Sivoia QED 

roller shade 

Wire Type C 

Wiring Type Key 

Type B 

Type C 

Sivoia QED 

keypad 

Sivoia QED 

drapery track 

Sivoia QED 

plug-in transformer 

Comm Link 

4 conductor #18 AWG 

(twisted/shielded) 

Power Supply 

3 conductor #16-20 AWG 

Sivoia QED 

skylight shade 

Notes: 

1. Each transformer powers 1 EDU and 1 keypad 

2. Each 50VA transformer uses .45A. 

Up to 36 50VA transformers per 15A circuit 

3. Each 100VA transformer uses .85A. 

Up to 17 100VA transformers per 15A circuit 

* 1 shade/drapery maximum per 


Sivoia QED® 

A A 

A 

power options | power panel 

Sivoia QED® 

power options | power panel wiring diagram 

A 

SVQ-10-PNL 

BB 

B 

DD 

D 

Wire Type A 

Sivoia QED 

B 

power panel 

120 V~ 

D 

Sivoia QED roller shade 

Wire Type A 

C 

CC 

C 

Sivoia QED skylight shade 

Wire Type A 

Wire Type B 

with cover 

without cover 

Sivoia QED drapery track 

Sivoia QED keypads 

Dimensions 

10.3 in. (262 mm) 

9.5 in. (241 mm) 

17.5 in. (445 mm) 

3.9 in. (99 mm) 

120 V~ 

Wiring Type Key 

Type A 

SVQ-CBL-250 Power and communications 

7 conductors: 

2 #16 AWG Power Supply 

1 #18 AWG Earth Ground 

4 #18 AWG Comm link (twisted/shielded) 

Type B 

Comm Link 

4 conductor #18 AWG (twisted/shielded) 

Notes: 

1. The Sivoia QED power panel powers up to 10 EDUs (1 per output) 

and 10 keypads 

2. The Sivoia QED power panel uses 8A. 

Maximum of one (1) panel per 15A circuit, two (2) panels per 20A circuit 

3. Lutron recommends using high magnetic circuit breakers for 

power panels. 

SVQ-10-PNL 


Sivoia QED® 

power | Lutron® supplied cable 

Lutron® shading solutions | integration 

Sivoia QED cable 

Lutron offers a 7-core cable which incorporates both 

power and communications into the same bundle. 

16 AWG (1.5 mm 2 ) (red/white) 

16 AWG (1.5 mm 2 ) (red) 

18 AWG (1.0 mm 2 ) (green/yellow) 

18 AWG (1.0 mm 2 ) (violet) 

18 AWG (1.0 mm 2 ) (gray) 

18 AWG (1.0 mm 2 ) (yellow) 

22 AWG (0.50 mm 2 ) Drain 

18 AWG (1.0 mm 2 ) (blue) 

.350 in. (9 mm) (white) 

SVQ-CBL-250 

Description 

• Non-plenum rated cable for use with 

Sivoia QED systems 




• Eight conductors: 

- Common – 18 AWG (1.0 mm²) 

- Device Power – 18 AWG (1.0 mm²) 

- MUX Data – 18 AWG (1.0 mm²) 

- MUX Data – 18 AWG (1.0 mm²) 

- 24 VAC –16 AWG (1.5 mm²) 

- 24 VAC –16 AWG (1.5 mm²) 

- Ground – 18 AWG (1.0 mm²) 

- Drain Wire – 22 AWG (0.50 mm²) 

• Total outer jacket diameter: 0.350 in. (9 mm) 




Refer to Sivoia QED Applications 

Note #2 for alternative cable options. 

(www.lutron.com) 

130 | Lutron 

Lutron | 131

Lutron® shading solutions | integration for total light control 

Single room total light control 


Whole home total light control 


Integration GRAFIK Eye® QS GRAFIK Eye QS wireless GRAFIK Eye via interface 

Integration 

NEW in 2011 

HomeWorks® QS 

HomeWorks® QS 

main repeater 

HomeWorks® via interface 

Part number 

Part number 

QSG 

QSGRJ 

SG-SVC 

HQP6-2-120 RR-MAIN-REP-WH HWI-Q96 

Description 

Sivoia QS and GRAFIK Eye 

QS communicate 

seamlessly via the QS 

communications link, 

allowing for scenes 

including both lights 

and shades. 

Sivoia QS Wireless and 

GRAFIK Eye QS Wireless 

communicate seamlessly 

via the QS communications 

link, allowing for scenes 

including both lights 

and shades. 

• Provides communication 

between Sivoia QED 

and GRAFIK 3000 or 

GRAFIK 4000 lighting 

control systems 

• Allow 1 zone on the 

GRAFIK Eye main unit 

for each system 

• Master control - controls 

all Sivoia QED shades/ 

draperies on one link 

Description 

The processor is the 

heart of the system and 

provides intelligence for 

automating lights at 

different times of day. 

HomeWorks QS main 

repeater natively supports 

Sivoia QS wireless shades, 

keypads, and RadioRA 2 

components without 

additional interfaces. 

Allows for up to 200 

devices (maximum, with 

2 repeaters). 

Provides two-way 

communication between 

HomeWorks and 

Sivoia QED systems for 

up to 96 devices. 

For more product integration possibilities, visit www.lutron.com. 


Note: contact closure interfaces are available for all systems. 


Lutron® shading solutions | integration for total light control 

Whole building total light control 

Third party integration 



Integration Quantum® n/a 

GRAFIK 5000TM 

GRAFIK 6000® 

GRAFIK 7000TM 

via interface 

Integration 

RS232 and IP interface 

BACnet communication 

through Quantum® 

processor and 

HomeWorks® QS processor 

RS232 and IP built into 

HomeWorks QS 

main repeater 

Requires PC programming 

Contact Closure Interface 

Part number 

n/a 

Part number 

QP2 

SO-SVC 

HQP6-2-120 HQP6-2-120 SVQ-CCI-8 

Description 

Provides a centralized 

connection point for Lutron® 

EcoSystem®, digital 

ballast modules, Lutron 

power panels, 

GRAFIK Eye® QS, and 

Sivoia QS shades. 

n/a 

• Provides communication 

between Sivoia QED and 

GRAFIK 5000, GRAFIK 

6000, or GRAFIK 7000 

lighting control system 

• Occupies one address on 

wallstation link 

Description 

Provides an access point 

for QS-Based systems 

through RS232 or 

TCP/IP over Ethernet, 

allowing third-party devices 

to control and/or monitor 

a QS system. 

RadioRA 2 main repeater 

natively supports Sivoia QS 

wireless shades, keypads, 

and RadioRA 2 components 

without additional 

interfaces. Allows for up to 

200 devices. 

Contact Closure Input 

Board receives 8 dry 

contact closure inputs and 

sets, presets, programs 

EDUs, and interfaces with 

non-Lutron A/V equipment. 



134 | Lutron 

Lutron | 135

Lutron® | the Lutron difference 

Aesthetics 

Flexibility and performance 

Control 

Installation 

Minimal, symmetrical light gaps 

Lutron roller shade systems offer light gaps 

as low as .75 inch per side. 

Elegant control options 

Lutron controls are designed to match high-end 

working and living spaces and are available in a wide 

variety of colors and finishes, including metals. 

Wide array of fabrics 

Lutron shading systems are available in sheer, 

dimout, and blackout fabrics to suit any function 

or aesthetic need, including many PVC-free 

fabric choices. 

Intelligent hembar alignment 

All shades in a Lutron shading system will track 

together and stop at programmable preset 

positions to within .125 inch. By utilizing intelligent 

hembar alignment, roller 20 , roller 64 , roller 100 , 

roller 150 , and roller 225 shade systems will move 

and track together, even though they use different 

size roller tubes. 

Limits and presets never lost 

Limits and preset shade positions are electronically 

precision-set and locked, providing power failure 

memory for up to 10 years. These limits and presets 

will never slip regardless of age, electrostatic 

discharge, or power failure. 

Sustainable design and LEED 

Lutron solutions can contribute 

to 40 or more of the 110 possible 

points in LEED® NC, CS, or S. 

System warranty and support 

Lutron shading systems come with an 8-year 

limited warranty, plus optional extended service. 

Lutron has factory-employed field service 

engineers throughout the world and is the only 

lighting control or shade systems manufacturer 

in the world with a 24-hour, 7 days a week 

technical support center. 

Ultra-quiet electronic drive 

Lutron® systems are low-voltage and operate at 

a near-silent level - rated at 38 dBA at three feet 

(roller 20 operates at 44 dBA at three feet). Shades 

move smoothly and stop at preset positions with no 

audible clicks. 

Total light control 

Lutron lighting control systems integrate with 

Lutron shading systems, offering intuitive control 

of both electric light and daylight. 

Simple reconfiguration 

Lutron systems can easily be reconfigured, limits 

can be changed, and presets can be reprogrammed 

without rewiring by using the remote, keypad, or 

electronic drive unit (EDU). 

Simplified wiring 

Lutron shading systems do not require any group 

controllers, relays, or line-voltage wiring between 

electronic drive units. Wiring can be simplified by 

using an optional power panel, allowing all system 

wiring to be run to one convenient location. 

About Lutron 

With a full line of shading solutions, Lutron has 

opened a new world of possibilities by seamlessly 

integrating electric and daylight control with a focus 

on innovation, world-class engineering, and customer 

service. For 20 years, Lutron has blended technology 

with design and environmental sensitivity to provide 

the ideal solution for total light control. 


Lutron® has been the world’s leading manufacturer of lighting controls and systems for 

50 years. With the addition of shading solutions, Lutron has opened a new world of 

possibilities by seamlessly integrating electric light and daylight control with a focus on 

innovation, world-class engineering, and customer service. Lutron blends technology with 

design and environmental sensitivity to provide the ideal solution for total light control. 

Lutron proudly offers an extensive line of shading systems and corresponding 

controls that are manufactured in the United States, enabling compliance with the 

Buy American Act and the Buy American provision of the American Recovery and 

Reinvestment Act (ARRA). Visit www.lutron.com/baa for the latest information. 

www.lutron.com/shadingsolutions 

Lutron Electronics Co., Inc. 

7200 Suter Road 

Coopersburg, PA 18036-1299 

U.S.A. 

World Headquarters +1.610.282.3800 

Barcelona I Beijing I Berlin I Hong Kong I London I Madrid I Mexico City I 

Milan I Paris I São Paulo I Shanghai I Singapore I Tokyo 

Technical Support Center 1.800.523.9466 

Customer Service/Quotes 1.888.LUTRON1 

Email: shadingquotes@lutron.com 

shadingcustserv@lutron.com 

© 09/2011 Lutron Electronics Co., Inc. 

P/N 367-1455 REV F

Download PDF - Hill Residential Systems

Transform your PDFs into Flipbooks and boost your revenue!

Delete template?

Save as template ?