Photovoltaic Catalogue 2010 - Aleta.hr

The energy of the sun,
converted by Eaton
PV inverter
Grid-connected inverter range from 1500 W up to 4600 W
Eaton offers a complete range of monophase inverters from 1500 W up to 4600 W, to serve the
individual requirements of each PV-system. This range is suitable for mono- and polycrystalline
PV-arrays up to 40m². The maintenance-free inverters are highly reliable and easy to install. The
embedded LCD display makes them easy to operate and service. A compact, sleek and modern
design makes the Eaton inverters unique. Compared to similar products of the same size, the
Eaton inverter’s power capacity is higher. The Maximum Power Point Tracking function yields
optimum conversion efficiency. What’s more, a no-fan design combined with natural convection
cooling assures a particularly silent operation and keeps the device clean.
Further features are:
Standard RS-232
Embedded ENS that complies
with VDE 0126-1-1/DK5940
Indoor use
The IP43 – ISG series is
suitable for indoor use. Exposure
to rain, moisture, water
or direct sunlight is not recommended
(direct sunlight will
increase internal temperatures,
thus reducing efficiency).
Outdoor use
The IP65 – ISG series is
suitable for indoor and outdoor
use. Exposure to direct sunlight
is also not recommended
(direct sunlight increases
internal temperatures, thus
reducing efficiency).
Specifications
All inverters are designed for
ambient temperatures within
the specified range (-20 to
+55 °C). For optimum operation,
an ambient temperature
within the range of 0 to
+40 °C is recommended.
The AC grid voltage has to be
between 190 and 256 V and
50 Hz (Italy 260 VAC).
4 EATON CORPORATION Power inverters/DC and AC switchgear series