Traffic Route I Residential Street/Area I Tunnel & Underpass I ... - Indal
Traffic Route I Residential Street/Area I Tunnel & Underpass I ... - Indal
Traffic Route I Residential Street/Area I Tunnel & Underpass I ... - Indal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Stela<br />
<strong>Traffic</strong> <strong>Route</strong> I <strong>Residential</strong> <strong>Street</strong>/<strong>Area</strong> I <strong>Tunnel</strong> & <strong>Underpass</strong> I City Centre I Architectural & Landscape<br />
Sports Lighting I Large Outdoor Industrial <strong>Area</strong> I Agricultural <strong>Area</strong> I City Planning+
2 Stela | <strong>Indal</strong>
TRIPLE-C: The perfect balance<br />
The Stela range is an outstanding example of <strong>Indal</strong>’s TRIPLE-C philosophy:<br />
it creates a new balance between Costs, Comfort and Care. With REVOLED<br />
technology exceptionally high energy savings can be achieved. With no<br />
need for light source replacements the attractive Total Cost of Ownership<br />
over the service life time of an installation will show that fantastic<br />
results can be accomplished. The required Comfort can be chosen by<br />
selecting from different light colours, optics and designs.<br />
Costs<br />
Very attractive Total Cost of Ownership<br />
propositions:<br />
• Energy efficient COO-LED thermal<br />
management concept increasing<br />
available lumens / Watt.<br />
• Very effective DIRECTA optical<br />
system reducing both energy and<br />
luminaire costs.<br />
• Extremely long-life LED light source<br />
resulting in less maintenance and<br />
high availability.<br />
Comfort<br />
Different white light solutions for<br />
different outdoor applications:<br />
• Various light distributions for a wide<br />
range of street and area geometries.<br />
• Good optical control to prevent<br />
undesired glare and obtrusive light.<br />
• From cold to warm white light colour<br />
to suit the desired ambiance.<br />
• Range of Stela designs and mounting<br />
options.<br />
Care<br />
Energy saving REVOLED technology<br />
with a positive contribution to the<br />
environment:<br />
• Highly reduced energy consumption<br />
and CO 2<br />
emissions.<br />
• No undesired spill of light due to<br />
precise aiming of light (DIRECTA<br />
optics).<br />
• Luminaire manufactured largely from<br />
recyclable materials.<br />
Costs<br />
Stela’s perfect<br />
balance<br />
Care<br />
Comfort<br />
<strong>Indal</strong> | Stela 3
Stela, a revolutionary<br />
success at your doorstep<br />
Stela is at the forefront of LED technology in public lighting.<br />
Already numerous cities and villages have benefited from <strong>Indal</strong>’s<br />
integral LED luminaire design approach REVOLED. Their large<br />
scale confidence in Stela has made it a proven standard in<br />
efficient LED public lighting.<br />
Stela, its own identity for a new era<br />
Take one glance at Stela and it becomes clear that it is something totally different from what we have been used to in<br />
public lighting up to till now. Using LEDs for functional outdoor lighting provides luminaire designers with new opportunities<br />
in design to beautify public spaces. The luminaire has become less the “packaging” of the lamp: light source and housing<br />
are much better integrated in one clear design concept. The benefits of Stela are evident.<br />
The cooling and light distribution concept REVOLED enables enormous energy savings and reduction of carbon footprints,<br />
while meeting current lighting standards. The perfect cooling also gives an extended life time of the LEDs of more than 20<br />
years (or 100,000 operating hours) and virtually eliminates maintenance. The resulting Total Cost of Ownership becomes<br />
very attractive. Stela has its own unique identity designed for a new era in lighting. The range especially covers the<br />
residential street and area applications and consists of the post top types Square and Wide, the post top / side entry Long<br />
and the symmetrical round post top Round.<br />
4 Stela | <strong>Indal</strong>
“After having evaluated<br />
many luminaires, Stela<br />
is the best and most<br />
advanced LED lighting<br />
solution in the market.”<br />
Graham Scragg<br />
Amey Constructing Company, United Kingdom<br />
Case Study:<br />
Birmingham and its successful<br />
transition towards quality and<br />
sustainable lighting<br />
In five years, approximately 50% of the street<br />
lighting in the city of Birmingham will be replaced<br />
and all the residential areas will incorporate Stela<br />
LED lighting totally remotely controlled. Management<br />
and maintenance of their street lighting will be<br />
done by means of a PFI (Private Financial Initiative)<br />
assigned by the Town Hall to Amey, a UK public<br />
service company in infrastructure and maintenance,<br />
for the next 25 years.<br />
Approximately 23,000 Stela’s will be installed in all<br />
residential areas with traffic routes to follow.<br />
“We deliberately took the challenge to start<br />
with LED for residential street and area lighting,<br />
as this is the biggest application area in public<br />
lighting with the biggest savings potential for<br />
public authorities.”<br />
Wim Visser<br />
Product Manager Road Lighting / Application Manager Infrastructure<br />
According to Amey, the advantages of Stela are<br />
numerous. Stela will reduce energy consumption<br />
and carbon emissions significantly. The long life and<br />
minimal maintenance requirements will cut operating<br />
costs immediately. The fully dimmable Stela street<br />
lights will provide good optical control, which<br />
allows for both the reduction of light pollution and<br />
obtrusive light. The city also expects a reduction<br />
in the fear of crime as a result of the improved<br />
illumination and excellent colour rendering.<br />
Stela was specifically designed to utilise LEDs as<br />
a light source, and there have been no failures in<br />
the first few thousands luminaires installed by Amey<br />
to date.<br />
<strong>Indal</strong> | Stela 5
LED Warranty Plan<br />
Thanks to our REVOLED technology, we can maximize the cooling of<br />
LEDs and offer optimal thermal management resulting in a guaranteed<br />
long life time of the LED luminaire. As a result <strong>Indal</strong> offers a special<br />
LED Warranty Plan for their LED luminaire range to limit the risks of the<br />
relatively higher investments in LED lighting.<br />
Apart from the general conditions on product warranty written in the <strong>Indal</strong> general sales conditions, we qualified the <strong>Indal</strong> LED<br />
luminaires into different warranty classes depending on their performances. For a further description of these warranty classes and<br />
LED Warranty Plan conditions please visit www.indal-lighting.com or ask your local <strong>Indal</strong> contact. For Stela luminaires the following<br />
LED warranty classes are effective:<br />
SILVER<br />
The standard warranty period is 25,000<br />
operating hours or 5 years (whatever<br />
reached first) / L80 (a minimum of 80% of<br />
the originally installed LED light output).<br />
GOLD<br />
The warranty period can be extended to<br />
50,000 operating hours or 10 years (whatever<br />
reached first) / L80 (a minimum of 80% of<br />
the originally installed LED light output) for<br />
Stela versions up to max. 350mA current.<br />
Qualification for Gold warranty can only be<br />
approved when the purchased Stela has<br />
been properly registered with the “LED<br />
Warranty Plan Registration Form”, that is<br />
available on www.indal-lighting.com.<br />
GOLD PLUS<br />
The warranty period can be extended to<br />
100,000 operating hours or 20 years<br />
(whatever reached first) / L70 (a minimum<br />
of 70% of the originally installed LED light<br />
output) for Stela versions up to max.<br />
350mA current. To extend the warranty plan<br />
from Gold to Gold Plus the original<br />
purchaser pays an amount to compensate<br />
for the enjoyed life of the product from<br />
11-20 years. The Gold Plus warranty can<br />
only be approved when the purchased Stela<br />
has been properly registered with the LED<br />
Warranty Plan Registration Form, that is<br />
available on www.indal-lighting.com.<br />
LED Driver Warranty Plan<br />
In case of a failing LED driver during the first 5 years (for Gold Plus, Gold and Silver products) of the warranty period, a new driver will be<br />
supplied free of charge to the original purchaser, under the condition that the failing driver is first returned to <strong>Indal</strong>. In case of Gold Plus or<br />
Gold warranty after year 5 of the warranty period a new driver will be supplied against a special payment per driver, under the condition<br />
that the failing driver is first returned to <strong>Indal</strong>. For further conditions, please visit www.indal-lighting.com or ask your local <strong>Indal</strong> contact.<br />
6 Stela | <strong>Indal</strong>
Advanced REVOLED<br />
technology<br />
LED Quality<br />
Concerns aspects like lumen packages,<br />
light colours, power consumption, life<br />
time expectancy and lumen depreciation.<br />
Thermal Management<br />
Concerns aspects like thermal resistance<br />
of the LEDs, inter distance of the LEDs in<br />
the luminaire and heat dissipation from<br />
the LEDs.<br />
Optical Management<br />
Concerns aspects like light output ratio,<br />
light distributions and tilt options as well<br />
as distribution reliability after incidental<br />
individual LED failure.<br />
Design Approach<br />
Concerns the design of the luminaire for<br />
optimal use of technical LED characteristics<br />
in a dedicated new design concept<br />
(REVOLED) or by backward engineering<br />
where LED engines are installed in<br />
existing luminaires (RETROLED).<br />
In today’s LED application for residential street and area lighting the<br />
aim is to light a certain area to the relevant lighting standard, at the<br />
lowest possible energy consumption and operation costs, with an<br />
acceptable lighting comfort and appearance. The LED choice itself,<br />
the thermal integration into the luminaire, the optical system and the<br />
overall design will define the outcome. REVOLED is an integral<br />
design approach to come to the optimal balance between those<br />
corner stones for each luminaire.<br />
<strong>Indal</strong> | Stela 7
Advanced REVOLED technology<br />
As luminaire functions vary, the weighing of those characteristics can be different per<br />
luminaire concept. For Stela the REVOLED technology consists of the innovative and<br />
efficient COO-LED cooling principle and the very effective DIRECTA lens technology,<br />
in order to respond to the high social priority attached to energy saving and CO 2<br />
reduction.<br />
LED Quality<br />
COO-LED<br />
thermal management<br />
For Stela high<br />
performance High-<br />
Power quality LEDs *<br />
are used, realising up<br />
to 140 “hot” lumens<br />
@ 350mA per LED<br />
in Cool White light<br />
colour. Warmer light<br />
colours at lower lumen output are also available:<br />
Neutral White (up to 125 lumen) and Warm White<br />
(up to 110 lumen).<br />
By selecting (binning) LEDs with low power<br />
consumption, combined with high efficiency<br />
drivers, the total luminaire “system” power<br />
consumption @ 350mA reaches 118 lumen/Watt.<br />
Next to the high quality of the LEDs themselves,<br />
the “hot” flux of the LEDs in Stela is high as a<br />
result of the carefully chosen inter distance of<br />
the LEDs and the efficient COO-LED cooling<br />
technique.<br />
* Selection of LEDs is under continuous development, please ask<br />
your local <strong>Indal</strong> contact for the latest updates.<br />
The performance of LEDs depends to a high degree on<br />
the operating tempera ture. Therefore, optimum<br />
cooling of the LEDs is necessary. COO-LED delivers<br />
superior temperature control by combining low<br />
current LEDs with a large cooling surface that is an<br />
integral part of the luminaire housing. LEDs are<br />
bonded directly to the outer skin of the luminaire,<br />
eliminating any insulation in the heat dissipation<br />
path. As a result the thermal loss of the original flux of the LEDs is around 2.5%<br />
only, which ensures a high LED efficiency. The luminaire body is also designed to<br />
ensure optimal drainage and cleaning of the luminaire.<br />
By keeping the operating temperatures of the LEDs (T-junction) low, and driving<br />
the LEDs at low currents, the expected life time of the LEDs is considerably<br />
extended. In this way the light source will last for as long as the entire service<br />
life time of the luminaire (normally 20-25 years, 100,000 operating hours), so there<br />
is no need for any future lamp replacements.<br />
The ambient temperature of the LED luminaires also has an effect on the operating<br />
temperature of the LEDs (the lower the Tamb the higher the LED flux). Therefore, in<br />
Stela the optimal Tamb-flux rate is selected at normal average (night) temperatures<br />
for outdoor lighting.<br />
TEMPERATURE-FLUX CURVE STELA SQUARE 18LED<br />
Relative flux in %<br />
120<br />
110<br />
100<br />
90<br />
80<br />
70<br />
60<br />
50<br />
40<br />
30<br />
20<br />
-30 -20 -10 0 10 20 30 40<br />
Tamb (ºC)*<br />
Typical Temperature-flux curve for Stela 18LED.<br />
*Average ambient (outdoor operating) temperature.<br />
8 Stela | <strong>Indal</strong>
DIRECTA<br />
optical management<br />
integral new<br />
Design approach<br />
The COO-LED method allows the LEDs to<br />
produce the maximum amount of light.<br />
An optical device is required subsequently<br />
to direct the light. In Stela this is the<br />
DIRECTA lens technology.<br />
Conventional light sources use reflectors,<br />
refractors or indirect optics to direct the<br />
light. In addition a bowl is traditionally used to cover this optical system.<br />
DIRECTA clear lenses are directly integrated into the luminaire housing, IP 66<br />
protected, with no additional cover required. The result is high luminaire<br />
efficiency (Light Output Ratio) of up to 92% (depending on the lens type).<br />
That’s 10-25% more efficient than conventional lighting solutions.<br />
LEDs are very small light sources, allowing the light to be directed very<br />
accurately by means of lenses. In this way light spill (both upward light and<br />
obtrusive light to the sides of the street/area) can be avoided. Thus even further<br />
increasing the efficiency of the lighting installation and preventing light<br />
pollution and glare at the same time.<br />
Various lens types are available for different project geometries and functions.<br />
Every indivi dual lens gives the same light distribution and unifor mity (overlay<br />
method). Multiplication of LEDs increases the lighting levels. Because of this,<br />
even in case of individual LED failure the light distribution will remain<br />
unaffected and therefore conformity to standards is secured.<br />
The <strong>Indal</strong> design team<br />
opted for a clearly<br />
individual character for<br />
Stela: it is immediately<br />
clear that it involved<br />
something new.<br />
The modern shapes,<br />
from the rectangular<br />
Square and Wide to the longitude Long and round<br />
symmetrical Round, have serene, recognisable lines<br />
and will therefore be at home in various environments.<br />
This makes the Stela range extremely suitable as a<br />
standard product for residential areas in particular,<br />
where a certain timelessness is often essential,<br />
especially when used on a large scale.<br />
The slightly curved shape of the luminaire makes it<br />
visible from a distance, without causing disturbing<br />
glare. In this way it fulfils its orientation function.<br />
Stela’s individual character also shows up well when<br />
used to create more specific ambience in particular<br />
places, such as boulevards, squares, parks, shopping<br />
areas and around buildings.<br />
<strong>Indal</strong> | Stela 9
Stela Square<br />
10 LED 14 LED 18 LED<br />
A compact post top luminaire up to 18 LEDs,<br />
perfectly suitable for relatively lower mounting<br />
heights and lighting levels in residential areas,<br />
squares, parks, pedestrian zones, but also around<br />
buildings.<br />
10 Stela | <strong>Indal</strong>
Compared to a conventional system<br />
Stela Square can offer reduced<br />
energy costs (up to > 50%) reduced<br />
CO 2<br />
emissions and no lamp<br />
replacement costs, resulting in<br />
significantly improved Total Cost<br />
of Ownership.<br />
DIRECTA optics available in Stela Square:<br />
TCO example Stela Square 14LED @350mA<br />
versus traditional FSD-36 luminaire.<br />
Total Cost of Ownership<br />
Wide Road Optic ME 5/6 Optic Pedestrian Crossing Optic<br />
Road-Standard (SRN) Road-Narrow (NRN) Road-Wide (WRN) Road-ME5/6 (MRN) Road-Pedestrian Crossing<br />
(ARN-Left Hand Drive or<br />
Right Hand Drive)<br />
FSD-36<br />
Stela 14LED<br />
@350mA<br />
Stela Square - Typical data at low and high current*<br />
Lamp replacement costs<br />
Energy consumption<br />
Luminaire & Installation<br />
350mA current<br />
700mA current<br />
LEDs Hot Psys*** Lm/W Expected led Hot Psys*** Lm/W Expected LED<br />
lumen** LIfe time**** lumen** LIfe time****<br />
10 1400lm 14W 100lm/W 100,000h/L85 2500lm 26W 96lm/W 100,000h/L80<br />
14 2000lm 18W 111lm/W 100,000h/L85 3500lm 35W 100lm/W 100,000h/L80<br />
18 2550lm 22W 116lm/W 100,000h/L85 4500lm 46W 98lm/W 100,000h/L80<br />
* Data @ average ambient (outdoor operating) temperature of 20-25ºC.<br />
** Lumen data for Cool White. For Neutral White take -12% and for Warm White -23% lumen.<br />
*** Psys = Total power consumption (LED + driver).<br />
**** 100,000-L85 = 85% of original lumens maintained after 100,000 operating hours.<br />
<strong>Indal</strong> | Stela 11
Compared to a conventional system<br />
Stela Wide can offer reduced energy<br />
costs (up to > 50%) reduced CO 2<br />
emissions and no lamp replacement<br />
costs, resulting in significantly<br />
improved Total Cost of Ownership.<br />
TCO example Stela Wide<br />
36LED @350mA versus<br />
traditional ST-70 luminaire.<br />
DIRECTA optics available in Stela Wide:<br />
Total Cost of Ownership<br />
ST-70<br />
Stela 36LED<br />
@350mA<br />
Wide Road Optic ME 5/6 Optic Pedestrian Crossing Optic<br />
Road-Standard (SRN) Road-Narrow (NRN) Road-Wide (WRN) Road-ME5/6 (MRN) Road-Pedestrian Crossing<br />
(ARN-Left Hand Drive or<br />
Right Hand Drive)<br />
Lamp replacement costs<br />
Energy consumption<br />
Luminaire & Installation<br />
Stela Wide - Typical data at low and high current*<br />
350mA current<br />
700mA current<br />
LEDs Hot Psys*** Lm/W Expected led Hot Psys*** Lm/W Expected LED<br />
lumen** LIfe time**** lumen** LIfe time****<br />
24 3350lm 29W 115lm/W 100,000h/L85 5850lm 60W 97lm/W 85,000h/L80<br />
36 5000lm 44W 114lm/W 100,000h/L85 8800lm 88W 100lm/W 85,000h/L80<br />
52 7200lm 62W 116lm/W 100,000h/L85 12700lm 123W 103lm/W 85,000h/L80<br />
* Data @ average ambient (outdoor operating) temperature of 20-25ºC.<br />
** Lumen data for Cool White. For Neutral White take -12% and for Warm White -23% lumen.<br />
*** Psys = Total power consumption (LED + driver).<br />
**** 100,000-L85 = 85% of original lumens maintained after 100,000 operating hours.<br />
12 Stela | <strong>Indal</strong>
Stela Wide<br />
24 LED 36 LED 52 LED<br />
The rectangular Stela Wide is a very<br />
versatile post top luminaire up to 52 LEDs.<br />
Due to the high maximum lumen packages<br />
suitable up to relatively higher mounting<br />
heights and lighting levels in residential<br />
areas, squares, parks, pedestrian zones,<br />
but also around buildings.<br />
<strong>Indal</strong> | Stela 13
Stela Long<br />
10 LED 14 LED 18 LED 24 LED 30 LED<br />
The Stela Long in its longitudinal shape is typically<br />
used for side entry installations. With a maximum<br />
of 30 LEDs, its lumen packages create a perfect<br />
overlap between Stela Square and Wide. In this way<br />
it completes the application scope for especially<br />
residential roads and areas, but of course it can<br />
also be used in squares, parks, pedestrian zones etc.<br />
14 Stela | <strong>Indal</strong>
Compared to a conventional system<br />
Stela Long can offer reduced energy<br />
costs (up to > 50%) reduced CO 2<br />
emissions and no lamp replacement<br />
costs, resulting in significantly<br />
improved Total Cost of Ownership.<br />
DIRECTA optics available in Stela Long:<br />
TCO example Stela Long 30LED @350mA<br />
versus traditional ST-50 luminaire.<br />
Total Cost of Ownership<br />
Wide Road Optic<br />
Pedestrian Crossing Optic<br />
Road-Standard (SRN) Road-Narrow (NRN) Road-Wide (WRN) Road-Pedestrian Crossing<br />
(ARN-Left Hand Drive or<br />
Right Hand Drive)<br />
ST-50<br />
Stela 30LED<br />
@350mA<br />
Stela Long - Typical data at low and high current*<br />
350mA current<br />
700mA current<br />
Lamp replacement costs<br />
Energy consumption<br />
Luminaire & Installation<br />
LEDs Hot Psys*** Lm/W Expected led Hot Psys*** Lm/W Expected LED<br />
lumen** LIfe time**** lumen** LIfe time****<br />
10 1400lm 14W 100lm/W 100,000h/L85 2500lm 26W 96lm/W 100,000h/L80<br />
14 2000lm 18W 111lm/W 100,000h/L85 3500lm 35W 100lm/W 100,000h/L80<br />
18 2550lm 22W 116lm/W 100,000h/L85 4500lm 46W 98lm/W 100,000h/L80<br />
24 3400lm 29W 117lm/W 100,000h/L85 6000lm 60W 100lm/W 100,000h/L80<br />
30 4250lm 36W 118lm/W 100,000h/L85 7450lm 73W 102lm/W 100,000h/L80<br />
* Data @ average ambient (outdoor operating) temperature of 20-25ºC.<br />
** Lumen data for Cool White. For Neutral White take -12% and for Warm White -23% lumen.<br />
*** Psys = Total power consumption (LED + driver).<br />
**** 100,000-L85 = 85% of original lumens maintained after 100,000 operating hours.<br />
<strong>Indal</strong> | Stela 15
Compared to a conventional system<br />
Stela Round can offer reduced energy<br />
costs (up to > 50%) reduced CO 2<br />
emissions and no lamp replacement<br />
costs, resulting in significantly<br />
improved Total Cost of Ownership.<br />
TCO example Stela Round 18LED @350mA<br />
versus traditional 2x FSD-24 luminaire.<br />
DIRECTA optics available in Stela Round:<br />
Total Cost of Ownership<br />
Wide Optic<br />
Road-Wide (2330 WRN)<br />
<strong>Area</strong>-Wide (2335 WRN)<br />
2xFSD-24<br />
Stela 18LED<br />
@350mA<br />
Lamp replacement costs<br />
Energy consumption<br />
Luminaire & Installation<br />
Stela Round - Typical data at low and high current*<br />
350mA current<br />
700mA current<br />
LEDs Hot Psys*** Lm/W Expected led Hot Psys*** Lm/W Expected LED<br />
lumen** LIfe time**** lumen** LIfe time****<br />
12 1650lm 16W 103lm/W 100,000/L85 2900lm 30W 96lm/W 70,000h/L80<br />
18 2500lm 22W 113lm/W 100,000/L85 4350lm 46W 94lm/W 70,000h/L80<br />
24 3350lm 29W 115lm/W 100,000/L85 5800lm 60W 96lm/W 70,000h/L80<br />
36 5000lm 44W 114lm/W 100,000/L85 8700lm 86W 101lm/W 70,000h/L80<br />
48 6650lm 58W 115lm/W 100,000/L85 11600lm 114W 101lm/W 70,000h/L80<br />
16 Stela | <strong>Indal</strong><br />
* Data @ average ambient (outdoor operating) temperature of 20-25ºC.<br />
** Lumen data for Cool White. For Neutral White take -12% and for Warm White -23% lumen.<br />
*** Psys = Total power consumption (LED + driver).<br />
**** 100,000-L85 = 85% of original lumens maintained after 100,000 operating hours.
Stela Round<br />
12 LED 18 LED 24 LED<br />
36 LED 48 LED<br />
The central and elegant post top shape makes Stela Round<br />
aesthetically suitable for many applications. The symmetry in<br />
which the LEDs, with a maximum of 48 LEDs, are arranged in the<br />
natural round shape adds a certain flair to the environment. It is<br />
very suitable for areas like parks or squares (area distribution),<br />
but can also be used in normal street geometries (road distribution).<br />
<strong>Indal</strong> | Stela 17
Stela the proven standard<br />
With its serene, recognisable lines the modern Stela shape will be at<br />
home in various environments. As a standard luminaire for residential<br />
area, where a certain timelessness is often essential. Or as a decorative<br />
element to enrich a specific area. Its large range of variations in types,<br />
optics, currents, light colours and different LED configurations makes it<br />
a new standard and a customised LED solution at the same time.<br />
265 mm<br />
265 mm<br />
600 mm<br />
400 mm 660 mm<br />
445 mm<br />
445 mm<br />
670 mm<br />
595 mm<br />
600 mm<br />
Stela Square<br />
Stela Wide<br />
Stela Long Side Entry<br />
Stela Long Post Top<br />
Stela Round<br />
Stela in perspective<br />
Stela Square<br />
Stela Wide<br />
Stela Long<br />
Stela Round<br />
(10 to 18 LEDs) suitable for mounting heights of 4-6m post top.<br />
(24 to 52 LEDs) suitable for mounting heights of 5-8m post top.<br />
(10 to 30 LEDs) suitable for mounting heights of 5-8m post top and side entry.<br />
(12 to 48 LEDs) suitable for mounting heights of 4-5m post top.<br />
ROUND<br />
ROUND<br />
18 Stela | <strong>Indal</strong>
Stela technical characteristics<br />
STELA – Windage and Weight<br />
Type Windage Weight<br />
In kg.<br />
STELA SQUARE 0.04 5.3<br />
STELA WIDE 0.06 8.2<br />
STELA LONG 0.05 7.0<br />
STELA ROUND 0.065 7.5<br />
MATERIALS<br />
• Housing, spigots, adapter and gear<br />
cover made of LM6 / DIN230<br />
die-cast aluminium.<br />
• Clear plastic DIRECTA lenses<br />
(PMMA).<br />
Finish<br />
The standard colour is Futura Gris 900<br />
Sablé (anthracite). Other RAL or Futura<br />
colours available on request.<br />
Ingress Protection<br />
IP 66.<br />
Impact Resistance<br />
IK 10 housing.<br />
Mounting<br />
• Suitable for post top Ø 60-76mm,<br />
Stela Long also in side entry version<br />
Ø 60mm.<br />
• Installation to the column by two<br />
M10 stainless steel bolts.<br />
• Built-in tilt angle of 10° for Stela<br />
Square and Wide. For Stela Long the<br />
spigot arrangements allow for tilt<br />
adjustments.<br />
Cable Connection<br />
In the driver compartment on<br />
plug / socket.<br />
Drivers<br />
Electronic LED drivers mounted on<br />
a galvanised steel tray in the driver<br />
compartment on top of the Stela<br />
cover. The driver compartment is easy<br />
accessible by removing screws.<br />
We offer various currents and dimming<br />
options.<br />
For more technical characteristics we refer to the Stela products pages in the <strong>Indal</strong> Technical lighting catalogue 2010 / 12<br />
or on www.indal-lighting.com.<br />
<strong>Indal</strong> | Stela 19