CNC-Coordinate Measuring Machines Crysta-Apex C - TECHMAR

Specification
Accuracy: 0,35 µm and 0,8 µm
CNC-Coordinate Measuring Machines LEGEX
CNC machine with impressive accuracy to 0.35 µm. Absolute top-of-the-range technology
for the most stringent precision requirements in the test laboratory.
• An integrated Temperature Compensation System guarantees the accuracy of the CMM main
unit under temperature conditions of 18 °C to 22 °C.
• Hight drive speed up to 200 mm/s.
• Integrated vibration suppression (from 500 series models).
• Highly rigid.
• Supplied as standard with PC and MCOSMOS software.
LEGEX 322 with PC
LEGEX 322
Request our detailed brochure!
NOTE: Products in this series are equipped with a safety system to
detect any shocks to the measuring system that could impair its
function. If the system is activated, the device will subsequently shut
down. The functionality of the device can be secured without
downtimes by asking Mitutoyo‘s service personnel to release the
safety system in good time.
LEGEX 774
Model
Measuring range X : Y : Z
mm
Accuracy*
L in mm
LEGEX 322 300 : 200 : 200 MPE E = (0,8 + 0,2 L/100) µm
LEGEX 574 510 : 710 : 455 MPE E = (0,35 + 0,1 L/100) µm
LEGEX 774 710 : 710 : 455 MPE E = (0,35 + 0,1 L/100) µm
LEGEX 776 701 : 710 : 605 MPE E = (0,35 + 0,1 L/100) µm
* According to DIN EN ISO 10360-2:2002 in the temperature range 20 °C ± 2 K; LEGEX 322 with TP 7 M;
from 500 series with MPP 300 Q
455