Worker's Safety Handbook for Rigger and Signalman - Workplace ...

More documents

Recommendations

Info

10. Good and Bad Rigging Practices Correct way to balance a shackle load 11. Good and Bad Rigging Practice Correct hook-up methods Packings Hook Washers Figure 8: Make sure the safety latch is in good condition. Figure 6: Insert sufficient washers to centralise the position of the shackle. Figure 9: Make sure the shackle is hooked up correctly. Figure 7: Make sure the shackle is not pulled down at an angle. 45° 45° Figure 10: Make sure the shackle is equally spaced apart. 13 14
12. Good and Bad Rigging Practices Correct rigging method Figure 12: Secure the hooks facing out. Figure 11: Wrong hooking up method. Figure 13: Do not secure the hooks facing in. Figure 14: Do not wrap a rope around the hook. 15 16
Page 1 and 2: Worker’s Safety Handbook for Rigg
Page 3 and 4: Preface This handbook serves as a w
Page 5 and 6: 4. Roles and Responsibilities of a
Page 7: 8. Roles and Responsibilities of a
Page 11 and 12: 15. Good and Bad Rigging Practices
Page 13 and 14: 19. Good and Bad Rigging Practices
Page 15 and 16: 23. Inspection of Hooks and Shackle
Page 17 and 18: 27. Roles and Responsibilities of a
Page 19 and 20: 30. Good Communication Practices Pr

Worker's Safety Handbook for Rigger and Signalman - Workplace ...

Create successful ePaper yourself

Delete template?

Save as template?