p - ASEF - Asian Shipbuilding Experts

More documents

Recommendations

Info

Void/Tank LC F. O. Tank Hopper Tank Void/Tank (DSS) C L Fig. 1 Single side skin construction (PSPC not to be applied) DSS Hopper Tank F. O. Tank Fig. 2 Double side skin construction (PSPC to be applied) 30/50
Effective date : Jul. 1, 2011(contract) 1.3.5 For the coating gpre-qualification test, the measured average dry film thickness (DFT) on each prepared test panels shall not exceed a nominal DFT (NDFT) of 320 microns plus 20% unless a paint manufacturer specifies a NDFT greater than 320 microns. In the latter case, the average DFT shall not exceed the specified NDFT plus 20% and the coating system shall be certified to the specified NDFT if the system passes the tests according to Annex 1 of MSC 215(82). The measured DFT shall meet the “90/10” rule and the maximum DFT shall be below the maximum DFT value specified by the manufacturer 31/50
Page 1 and 2: 4 th Asian Shipbuilding Experts’
Page 3 and 4: 3/50
Page 5 and 6: 5/50
Page 7 and 8: Res.MSC.288(87) ; 2.1 Crude oil tan
Page 9 and 10: •PSPC/WBT : Res.MSC.215(82) Item
Page 11 and 12: •PSPC/Voids : Res.MSC.244(83) Ite
Page 13 and 14: •PSPC/COT : Res.MSC.288(87) Item
Page 15 and 16: TYPICAL SECTION OF V.L.C.C. Marked
Page 17 and 18: 17/50
Page 19 and 20: 19/50
Page 21 and 22: 21/50
Page 23 and 24: 23/50
Page 25 and 26: 25/50
Page 27 and 28: Item Class Comments Reply/Solution
Page 29: Item Class Comments Reply/Solution
Page 33 and 34: PSPC 8 ALTERNATIVE SYSTEMS The requ
Page 35 and 36: Item Owner Comments Reply/Solution
Page 37 and 38: 37/50
Page 39 and 40: 39/50
Page 41 and 42: 41/50
Page 43 and 44: 43/50
Page 45 and 46: 45/50
Page 47 and 48: Expect NP for secondary surface pre
Page 49 and 50: Unified understanding di on PSPC is

p - ASEF - Asian Shipbuilding Experts

Create successful ePaper yourself

Delete template?

Save as template?