Wavin_CompositeManifold_Brochure - Plumb Center online

Underfloor heating & cooling solutions by Wavin
NEW Thermoboard
Composite Manifold
Designed for installers,
built for flexibility
Entirely modular
Lightweight, simple to assemble
Easily extendable: up to 12 ports
No special tools required

UFH that you and your
customers can trust
Thermoboard. It’s the new name
for UFH from Wavin.
We’re specialists, with long experience
and in-depth expertise behind all our tried
and tested products. There’s also great
technical support to help ensure
that projects turn out right every time.
In short, you can trust Thermoboard
because…
UFH, it’s what we do!
The NEW
Thermoboard Composite Manifold
It has everything you want.
The new Thermoboard
composite manifold sits
at the centre of the most
comprehensive, flexible and
practical range of underfloor
heating system components
available in the UK. Providing
a truly flexible end-to-end
UFH solution.
This unique modular unit
has been designed with the
installer in mind:
• Configure any system from
simple flexible modules
• Retrofit another circuit to
the manifold in minutes
• Easy to balance the system
and keep it balanced
• For cooling as well as heating
• BBA certificated for 25-year
service life
For everything
that’s right about
UFH – Thermoboard.

The most adaptable
manifold you’ll ever install
Start with a
Composite Manifold
Starter Pack
Pick any number
of ports, from 1 to 12
Connect to
the Control Pack
• Entirely modular
• Lightweight and simple
to assemble
• No special tools required
• Easily extendable: up to 12 ports
• Install with ports facing
up or down as required
• Unique ‘Memory Ring’:
enables circuit isolation and
balancing without tools

With our new Control System
Wired or wireless – it’s your choice
The new Thermoboard Control System is equally efficient and easy to
install as the Composite Manifold, giving installers complete flexibility.
• Mains-powered standard
Control Centre
• Can control up to 14 heating zones
• ‘Pick & Mix’ thermostats:
with hard-wired and wireless,
programmable and nonprogrammable
versions available
• ‘Install now – assign later’ design:
eliminates cross wiring and
associated costs
• Wireless thermostats mean no
chasing of cables through walls,
and avoidance of wiring costs
in those zones
• Thermostat operation requires
no explanation: makes it extremely
easy for homeowners to set
heating to personal preferences
• Ideal for use in new build,
extensions and renovations

Thermoboard –
the manifold myth-buster!
UFH manifolds
are difficult to
configure, right
Not any more – The new
Thermoboard manifold is
easy to adapt. You can add or
remove circuits in minutes.
No. The new Thermoboard
lightweight manifolds are
assembled on the wall.
In fact, you’ll really notice
the weight reduction.
UFH manifolds are
heavy, cumbersome
and too big for
small jobs, right
But I still need a
separate manifold
for each floor, right
No. Thermoboard manifolds
can receive pipework from
above or below into a single
system. The ports can face
up and down as required.
Absolutely not. With the
unique new Thermoboard
Memory Ring, balancing the
system is easy. You can even
isolate a circuit without
unbalancing the system, and
no tools are needed.
Balancing a system
is a nightmare,
keeping it balanced
is worse, right

Underfloor heating & cooling solutions by Wavin
The NEW
Thermoboard Composite Manifold
Designed for installers,
built for flexibility
Try the new Thermoboard
Composite Manifold now.
Thermoboard is available from
all major stockists nationwide.
Ask for it at your regular merchant
or contact Thermoboard.
Telephone: 01392 444122
Email: info@thermoboard.co.uk
Visit: www.thermoboard.co.uk
UFH, it’s what we do!
Wavin
Underfloor Heating Division
The Dart Building
Grenadier Road
Exeter Business Park
Exeter, Devon EX1 3QF
UF431
Tel: 01392 444 122
Fax: 01392 444 135
Email: info@thermoboard.co.uk