06 Audio english

448
SIRUS PRO MXC 3 – 3 CH AMPLIFIER
WITH INTEGRATE CROSS OVER
CODE 1118
This MXC 3 amplifier offers three outputs, the frequencies
of which are adjustable via poties.
This amplifier offers: 1x SUB output for subwoofer, 2x HI
outputs for satellites. Consequently three passive speakers
can be connected with this unit. For example: 2x
PS 12 and 1x PS1801
Technical data
Power Output Level RMS @ 8 ohm stereo 200 + 200 + 550 W
1 kHz, THD+N=0.1% RMS @ 4 ohm stereo 325 + 325 + 850 W
RMS @ 8 ohm bridge
Phase response (1 W, 20 Hz-20 kHz @ 8 ohm) +/- 10°
Total Harmonic Distortion 20 Hz ~ 20 kHz, Half Power < 0,1%
Frequency Response 1 W / 8 ohm 20 Hz - 20 kHz +/- 1dB
Slew Rate 15 V / μs
Intermodulation Distoration 60 Hz:7 kHz, 4:1, Half Power 0.03%
Channel Separation Half Power, RL=8 ohm > 60 dB
1 kHz Vol.max.,input 600 ohm shunt > 60 dB
SN Ratio > 90 dB
Damping Factor 8 ohm, 1f = 1 kHz L&R: 250 SUB:300
Sensitivity (Vol. max.) Rated Power into 8ohm 0.775 V
Input Impedance balanced / unbalanced 20 Kohm /
Mistakes and availability error is to be excepted. If not declared all Lighteffects will be deliverd without illuminant.
Incl.
Freq.
Weiche
balanced, 10 Kohm / unbalanced
Controls Front Panel Power Switch (on/off), Volume/CH
Rear Panel sensitivity switch, grounding switch,
operation mode switch, filter switch
Input Connectors per channel female XLR + Jack
Output Connectors per channel binding posts + speakon connectors
LED Indicators per channel protect, limiter, signal
Protection Circuit short circuit protect, over load protect, DC protect,
soft start, high temperature protect limiter
Class AB
Power Supply EUROPE 230 V, 50 Hz, OTHER 220 V, 50 Hz
Cooling two individual cooling fan controlled
by temperature
1
Channel
Bass
2s
Channels
High
230 V
50 Hz